ATXMEGA128B1-AN - 32MHz 128KB Flash MCU | Microchip
Référence : ATXMEGA128B1-AN ✓ ActifATXMEGA128B1-AN Présentation
An AVR XMEGA microcontroller is an enhanced RISC microcontroller platform that combines a low-power 8/16-bit architecture with integrated Flash, SRAM, EEPROM, and event-driven peripherals. Within the broader semiconductor and embedded-control hierarchy, it sits between general-purpose microcontrollers and highly integrated embedded processors. The ATXMEGA128B1 family is designed to provide more peripheral integration and faster event response than basic 8-bit AVR devices while retaining familiar AVR development workflows.
The principal features include 128 KB of Flash organized as 128K x 8, an 8 KB boot-code section, 8 KB of SRAM, 2 KB of EEPROM, and 53 general-purpose I/O lines. Its two-channel DMA controller and four-channel event system support predictable transfers between peripherals without excessive CPU intervention. The integrated USB Full-Speed device controller adds USB connectivity, while the 4 x 40 segment LCD controller can directly drive suitable segmented displays. A maximum operating frequency of 32 MHz supports up to 32 MIPS throughput.
The B1 device architecture combines the AVR enhanced RISC core with a programmable multilevel interrupt controller, real-time counter, and hardware event system. Read-while-write Flash operation permits code execution while nonvolatile memory is being accessed, while on-chip SRAM supports time-critical data handling. The manufacturer documents MPLAB Snap debugging through High-Speed USB 2.0 and an 8-pin SIL connector using two I/O pins plus the reset line for in-circuit debugging and in-circuit serial programming.
Typical uses include USB-connected human-interface devices, compact industrial controllers, segmented display equipment, data acquisition systems, and low-power embedded control products. The event system is particularly useful when signals from timers, comparators, or external interrupt sources must trigger another peripheral at a predictable time. USB device support can simplify a peripheral design by removing a separate USB interface controller when the required device-class firmware fits the available memory and processing resources.
The main PCB-design constraint is the 100-pin TQFP footprint. Use the manufacturer pin-description table when assigning tracks, and place decoupling capacitors close to the appropriate supply pins. Confirm the exact clock, programming interface, USB transceiver requirements, unused-pin treatment, and operating voltage in the manufacturer datasheet before releasing the layout. The 14 x 14 mm package also requires careful consideration of solderability, lead geometry, and manufacturing inspection criteria.
Alternatives de remplacement direct pour ATXMEGA128B1-AN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATXMEGA128B1-AN (même facteur de forme et même empreinte) — différant par Product Type, Program Memory.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesATXMEGA128B1-AN Valeurs maximales et caractéristiques électriques
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Flash Memory | 128 KB (128K x 8) |
| Boot Code Section | 8 KB |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| General-Purpose I/O | 53 lines |
| DMA Channels | 2 channels |
| Event System Channels | 4 channels |
| USB Interface | USB Full-Speed device |
| LCD Controller Capacity | 4 x 40 segments |
| Real-Time Counter | 1 real-time counter |
| Programmable Multilevel Interrupt Controller | Yes |
| Operating Voltage | 1.6 V to 3.6 V |
| Maximum Operating Temperature | 105 °C |
| Boîtier | 100-pin TQFP, 14 x 14 mm |
| Type de montage | Surface mount |
| Program Memory | In-system programmable Flash with read-while-write capability |
| Debug and Programming | MPLAB Snap, JTAG, and in-circuit serial programming |
| Green Classification | Green |
Guide de configuration des broches du ATXMEGA128B1-AN 100-pin tqfp, 14 x 14 mm
Configuration des broches du ATXMEGA128B1-AN (boîtier 100-pin tqfp, 14 x 14 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATXMEGA128B1-AN.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATXMEGA128B1-AN convient pour 6 applications: USB Human-Interface Device, Segmented LCD Control, Industrial Sensor Controller, Programmable Automation Controller, Data Acquisition Gateway, Low-Power Embedded Control.
USB Human-Interface Device
The ATXMEGA128B1-AN fits a USB-connected controller that needs more program memory and event handling than a basic 8-bit AVR. Its 128 KB of self-programming Flash supports USB firmware, configuration storage, and protocol code, while the 2 KB EEPROM preserves parameters independently of the main Flash. The USB Full-Speed device controller and 32 MIPS throughput allow responsive control of buttons, LEDs, sensors, and a host-side USB interface. The event system can synchronize input activity with timers or output updates, reducing interrupt-driven polling. Firmware must implement the required USB device class, and the PCB must follow the manufacturer guidance for USB routing, decoupling, and programming signals.
Recommandé
Segmented LCD Control
The ATXMEGA128B1-AN can control a display containing as many as 4 x 40 segments without a separate display driver. This is useful in industrial panels, laboratory instruments, appliances, and compact control units where a segmented LCD is preferred over a graphical display. The 53 general-purpose I/O lines leave substantial pin capacity for keys, indicators, sensors, and communication while the LCD controller handles display multiplexing. Its 8 KB SRAM can hold display state and working buffers, and the four-channel event system can coordinate display updates with measurement timing. The designer should confirm the LCD voltage, segment drive requirements, and pin assignments in the manufacturer datasheet and use the LCD-specific application guidance when selecting bias and external components.
Recommandé
Industrial Sensor Controller
The ATXMEGA128B1-AN is suitable for a compact industrial sensor node combining analog measurement, local control, event handling, and USB data exchange. Its two DMA channels support predictable peripheral transfers, while the four-channel event system can connect timer, comparator, and interrupt events without continuous CPU polling. The 8 KB SRAM accommodates acquisition buffers, and the 2 KB EEPROM can retain calibration or configuration information. The 1.6 V to 3.6 V operating range supports multiple embedded supply architectures, and the listed 105 °C maximum temperature provides headroom for demanding industrial environments. Production designs must still verify analog accuracy, isolation strategy, calibration method, EMC requirements, and the environmental qualification appropriate to the installed equipment.
Recommandé
Programmable Automation Controller
The ATXMEGA128B1-AN can serve as the central controller in a compact automation or test system where deterministic timing, programmable logic, and local data handling matter. The four-channel event system, real-time counter, programmable multilevel interrupt controller, and two DMA channels provide multiple ways to coordinate time-sensitive operations. At 32 MHz and up to 32 MIPS, the AVR core can execute control routines while the peripherals move data or respond to events. The 128 KB Flash capacity is useful for embedded protocols, self-tests, and configuration workflows, while 2 KB of EEPROM supports persistent setup data. For safety-related or high-energy equipment, add independent monitoring, emergency shutdown, and appropriate isolation rather than treating the microcontroller as the sole protection element.
Recommandé
Data Acquisition Gateway
The ATXMEGA128B1-AN can provide a local acquisition and buffering stage in a larger measurement system. Its 8 KB SRAM and two DMA channels support moving sampled data between peripherals and memory, while the four-channel event system can trigger acquisition sequences relative to timers or external events. The 32 MIPS execution rate provides headroom for calibration, scaling, and communication tasks beyond the USB Full-Speed device interface. Engineers should use the real-time counter for accurate time-base functions and assign DMA channels around the required peripheral data paths. External precision converters may be needed when the required accuracy exceeds the integrated analog performance. Validation should include timing margins, buffer overflow behavior, USB enumeration, and recovery after bus faults.
Recommandé
Low-Power Embedded Control
The ATXMEGA128B1-AN is appropriate for compact embedded controllers whose workload includes control logic, local storage, and communication while preserving a simple AVR development environment. The programmable interrupt controller and event system allow the firmware to react to external activity without continuously polling, which can reduce active processing time in duty-cycled products. The device includes 8 KB of SRAM, 2 KB of EEPROM, and 128 KB of Flash, providing enough resources for local configuration, protocol handlers, and diagnostic routines. Low-power design still requires attention to peripheral clocking, unused-pin states, regulator efficiency, and wake conditions. Review the manufacturer clock, sleep-mode, and brownout guidance, then measure current consumption in the complete operating state rather than relying on core-clock assumptions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATXMEGA128B1-AN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Microchip Technology |
| Package | 100-pin TQFP, 14 x 14 mm |
| CPU Architecture | 8/16-bit AVR enhanced RISC |
| Maximum Frequency | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Flash Memory | 128 KB |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| Operating Voltage | 1.6 V to 3.6 V |
| USB Interface | USB Full-Speed device |
| DMA Channels | 2 channels |
| Event System | 4 channels |
Principaux différenciateurs
- Integration of USB, event system, DMA, and LCD control (vs Basic 8-bit AVR devices)
- Higher memory capacity within the ATxmega128B1 family (vs ATXMEGA64B1 family devices)
- Higher throughput for control and protocol workloads (vs 8 MHz-class AVR devices)
Notes de conception
Use the manufacturer pin-description table to assign all 100 TQFP terminals, including alternate-function, programming, reset, clock, USB, and power pins. Place the required input, output, and internal regulator decoupling capacitors close to their corresponding pins, following the recommended layout and loop area. Route USB signals as a controlled impedance interface if the board uses a USB connector, and keep external clock and programming nets away from sensitive analog inputs.
Design the 1.6 V to 3.6 V supply so it remains within the limits shown for the selected operating frequency, USB state, and analog configuration. Check startup, brownout, and power-supply sequencing requirements against the manufacturer electrical characteristics. The internal regulator and external decoupling network should follow the reference circuit; do not assume that a nominal 3.3 V rail guarantees identical timing or USB behavior at 1.8 V.
Assign the event-system, timer, comparator, and DMA resources during firmware planning because alternate-function mappings can constrain otherwise available I/O pins. Preserve pin access for JTAG or in-circuit serial programming after placement, and reserve enough board edge clearance for production programming fixtures. For mixed analog and digital functions, partition sensitive analog inputs away from switching nodes and maintain a continuous ground reference.
Do not treat a package-matched ATxmega128B1 ordering option as an automatic drop-in substitute without checking temperature grade, tape-and-reel or tray form, and ordering-code requirements. The ATXMEGA128B1-CU uses a different CBGA land pattern, so it cannot replace the TQFP device on the same PCB. Review fuse settings, clock configuration, boot behavior, and peripheral pin multiplexing when transferring firmware between related members.
Informations de conformité
The manufacturer listing identifies the ATXMEGA128B1-AN as green, but the authoritative compliance declarations were not stated in the retrieved product information. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status for the exact ordering code before regulatory or vehicle qualification use.