Microchip Technology

ATXMEGA128B1-AN - 32MHz 128KB Flash MCU | Microchip

Артикул: ATXMEGA128B1-AN ✓ Активен
1.6 V to 3.6 V Vdss 100-pin TQFP, 14 x 14 mm Package 32 MHz Speed 128 KB (128K x 8) Memory
MOQ: 1 |

ATXMEGA128B1-AN Обзор

Microchip Technology ATXMEGA128B1-AN is an 8/16-bit AVR XMEGA microcontroller operating at up to 32 MHz, with 128 KB of self-programming Flash memory and 8 KB of SRAM in a 100-pin TQFP package. The device also includes 2 KB of EEPROM, a 32 MIPS execution rate, and USB Full-Speed device connectivity. According to the Microchip product page, these features suit applications that require embedded control, USB connectivity, segmented displays, and deterministic event handling without relying on an external memory or display controller.

An AVR XMEGA microcontroller is an enhanced RISC microcontroller platform that combines a low-power 8/16-bit architecture with integrated Flash, SRAM, EEPROM, and event-driven peripherals. Within the broader semiconductor and embedded-control hierarchy, it sits between general-purpose microcontrollers and highly integrated embedded processors. The ATXMEGA128B1 family is designed to provide more peripheral integration and faster event response than basic 8-bit AVR devices while retaining familiar AVR development workflows.

The principal features include 128 KB of Flash organized as 128K x 8, an 8 KB boot-code section, 8 KB of SRAM, 2 KB of EEPROM, and 53 general-purpose I/O lines. Its two-channel DMA controller and four-channel event system support predictable transfers between peripherals without excessive CPU intervention. The integrated USB Full-Speed device controller adds USB connectivity, while the 4 x 40 segment LCD controller can directly drive suitable segmented displays. A maximum operating frequency of 32 MHz supports up to 32 MIPS throughput.

The B1 device architecture combines the AVR enhanced RISC core with a programmable multilevel interrupt controller, real-time counter, and hardware event system. Read-while-write Flash operation permits code execution while nonvolatile memory is being accessed, while on-chip SRAM supports time-critical data handling. The manufacturer documents MPLAB Snap debugging through High-Speed USB 2.0 and an 8-pin SIL connector using two I/O pins plus the reset line for in-circuit debugging and in-circuit serial programming.

Typical uses include USB-connected human-interface devices, compact industrial controllers, segmented display equipment, data acquisition systems, and low-power embedded control products. The event system is particularly useful when signals from timers, comparators, or external interrupt sources must trigger another peripheral at a predictable time. USB device support can simplify a peripheral design by removing a separate USB interface controller when the required device-class firmware fits the available memory and processing resources.

The main PCB-design constraint is the 100-pin TQFP footprint. Use the manufacturer pin-description table when assigning tracks, and place decoupling capacitors close to the appropriate supply pins. Confirm the exact clock, programming interface, USB transceiver requirements, unused-pin treatment, and operating voltage in the manufacturer datasheet before releasing the layout. The 14 x 14 mm package also requires careful consideration of solderability, lead geometry, and manufacturing inspection criteria.

Аналоги без доработки для ATXMEGA128B1-AN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ATXMEGA128B1-AN (тот же форм-фактор и посадочное место) — отличается по Product Type, Program Memory.

Microchip Technology
Product Type: 8/16-bit AVR XMEGA B1 microcontroller
Program Memory: 128 KB Flash
Сравнить с ATXMEGA128B1-AN →

Для этого товара нет аналогов без доработки.

Запросить аналоги

ATXMEGA128B1-AN Максимальные параметры и электрические характеристики

Product Type 8/16-bit AVR XMEGA microcontroller
Maximum CPU Frequency 32 MHz
Maximum Throughput 32 MIPS
Flash Memory 128 KB (128K x 8)
Boot Code Section 8 KB
SRAM 8 KB
EEPROM 2 KB
General-Purpose I/O 53 lines
DMA Channels 2 channels
Event System Channels 4 channels
USB Interface USB Full-Speed device
LCD Controller Capacity 4 x 40 segments
Real-Time Counter 1 real-time counter
Programmable Multilevel Interrupt Controller Yes
Operating Voltage 1.6 V to 3.6 V
Maximum Operating Temperature 105 °C
Корпус 100-pin TQFP, 14 x 14 mm
Тип монтажа Surface mount
Program Memory In-system programmable Flash with read-while-write capability
Debug and Programming MPLAB Snap, JTAG, and in-circuit serial programming
Green Classification Green

Руководство по цоколевке ATXMEGA128B1-AN в корпусе 100-pin tqfp, 14 x 14 mm

Цоколевка для ATXMEGA128B1-AN (корпус 100-pin tqfp, 14 x 14 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 100-pin tqfp, 14 x 14 mm для ATXMEGA128B1-AN

Нет подробных данных о распиновке для ATXMEGA128B1-AN.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATXMEGA128B1-AN подходит для 6 применениеs: USB Human-Interface Device, Segmented LCD Control, Industrial Sensor Controller, Programmable Automation Controller, Data Acquisition Gateway, Low-Power Embedded Control.

🖥️

USB Human-Interface Device

The ATXMEGA128B1-AN fits a USB-connected controller that needs more program memory and event handling than a basic 8-bit AVR. Its 128 KB of self-programming Flash supports USB firmware, configuration storage, and protocol code, while the 2 KB EEPROM preserves parameters independently of the main Flash. The USB Full-Speed device controller and 32 MIPS throughput allow responsive control of buttons, LEDs, sensors, and a host-side USB interface. The event system can synchronize input activity with timers or output updates, reducing interrupt-driven polling. Firmware must implement the required USB device class, and the PCB must follow the manufacturer guidance for USB routing, decoupling, and programming signals.

📺

Segmented LCD Control

The ATXMEGA128B1-AN can control a display containing as many as 4 x 40 segments without a separate display driver. This is useful in industrial panels, laboratory instruments, appliances, and compact control units where a segmented LCD is preferred over a graphical display. The 53 general-purpose I/O lines leave substantial pin capacity for keys, indicators, sensors, and communication while the LCD controller handles display multiplexing. Its 8 KB SRAM can hold display state and working buffers, and the four-channel event system can coordinate display updates with measurement timing. The designer should confirm the LCD voltage, segment drive requirements, and pin assignments in the manufacturer datasheet and use the LCD-specific application guidance when selecting bias and external components.

🏭

Industrial Sensor Controller

The ATXMEGA128B1-AN is suitable for a compact industrial sensor node combining analog measurement, local control, event handling, and USB data exchange. Its two DMA channels support predictable peripheral transfers, while the four-channel event system can connect timer, comparator, and interrupt events without continuous CPU polling. The 8 KB SRAM accommodates acquisition buffers, and the 2 KB EEPROM can retain calibration or configuration information. The 1.6 V to 3.6 V operating range supports multiple embedded supply architectures, and the listed 105 °C maximum temperature provides headroom for demanding industrial environments. Production designs must still verify analog accuracy, isolation strategy, calibration method, EMC requirements, and the environmental qualification appropriate to the installed equipment.

⚡

Programmable Automation Controller

The ATXMEGA128B1-AN can serve as the central controller in a compact automation or test system where deterministic timing, programmable logic, and local data handling matter. The four-channel event system, real-time counter, programmable multilevel interrupt controller, and two DMA channels provide multiple ways to coordinate time-sensitive operations. At 32 MHz and up to 32 MIPS, the AVR core can execute control routines while the peripherals move data or respond to events. The 128 KB Flash capacity is useful for embedded protocols, self-tests, and configuration workflows, while 2 KB of EEPROM supports persistent setup data. For safety-related or high-energy equipment, add independent monitoring, emergency shutdown, and appropriate isolation rather than treating the microcontroller as the sole protection element.

🔧

Data Acquisition Gateway

The ATXMEGA128B1-AN can provide a local acquisition and buffering stage in a larger measurement system. Its 8 KB SRAM and two DMA channels support moving sampled data between peripherals and memory, while the four-channel event system can trigger acquisition sequences relative to timers or external events. The 32 MIPS execution rate provides headroom for calibration, scaling, and communication tasks beyond the USB Full-Speed device interface. Engineers should use the real-time counter for accurate time-base functions and assign DMA channels around the required peripheral data paths. External precision converters may be needed when the required accuracy exceeds the integrated analog performance. Validation should include timing margins, buffer overflow behavior, USB enumeration, and recovery after bus faults.

🧩

Low-Power Embedded Control

The ATXMEGA128B1-AN is appropriate for compact embedded controllers whose workload includes control logic, local storage, and communication while preserving a simple AVR development environment. The programmable interrupt controller and event system allow the firmware to react to external activity without continuously polling, which can reduce active processing time in duty-cycled products. The device includes 8 KB of SRAM, 2 KB of EEPROM, and 128 KB of Flash, providing enough resources for local configuration, protocol handlers, and diagnostic routines. Low-power design still requires attention to peripheral clocking, unused-pin states, regulator efficiency, and wake conditions. Review the manufacturer clock, sleep-mode, and brownout guidance, then measure current consumption in the complete operating state rather than relying on core-clock assumptions.

What are the key specifications of ATXMEGA128B1-AN that engineers should know?
The ATXMEGA128B1-AN is a 32 MHz, 8/16-bit AVR XMEGA microcontroller with 128 KB of Flash, 8 KB of SRAM, 2 KB of EEPROM, USB Full-Speed device support, and a 4 x 40 segment LCD controller. According to the Microchip product page, the device can execute up to 32 MIPS and includes two DMA channels, four event-system channels, and 53 general-purpose I/O lines. It is packaged in a 100-pin, 14 x 14 mm TQFP.
What is the operating voltage of ATXMEGA128B1-AN?
The ATXMEGA128B1-AN operates from 1.6 V to 3.6 V. The Microchip ordering information identifies the device as a green, 1.6 V to 3.6 V AVR XMEGA microcontroller. This range allows the device to operate from 1.8 V, 2.5 V, or 3.3 V system rails, provided the external clock, USB transceiver requirements, and selected analog peripherals remain valid at the chosen supply voltage.
How much Flash and SRAM does ATXMEGA128B1-AN provide?
The ATXMEGA128B1-AN provides 128 KB of self-programming Flash, including an 8 KB boot-code section, together with 8 KB of SRAM and 2 KB of EEPROM. According to the Microchip product page, the Flash supports read-while-write operation. This combination is suitable for USB firmware, boot management, protocol stacks, and applications requiring a reasonable amount of run-time data storage.
Does ATXMEGA128B1-AN have USB connectivity?
Yes, the ATXMEGA128B1-AN includes a USB Full-Speed device controller. According to the manufacturer product page, it can serve as a USB device while also providing 128 KB of program memory and 32 MIPS of execution throughput. A complete design must still include the required USB routing, protection, and connection arrangement described in the manufacturer datasheet.
What package does ATXMEGA128B1-AN use?
The ATXMEGA128B1-AN uses a 100-pin TQFP measuring 14 x 14 mm. Microchip identifies this package in the product listings, while the manufacturer datasheet provides the authoritative pin-description table. Because the package has 100 terminals, the PCB footprint, pin numbering, exposed programming signals, and decoupling connections must be checked directly against the manufacturer documentation.
Where can I download the ATXMEGA128B1-AN datasheet PDF?
The manufacturer datasheet can be downloaded from the Microchip document link identified by the filename Atmel-8330-8-and-16-bit-AVR-Microcontroller-XMEGA-B-ATxmega64B1-ATxmega128B1_Datasheet.pdf. It covers the ATxmega64B1 and ATxmega128B1 devices, including electrical characteristics, package information, pin descriptions, memory, peripherals, and application guidance. Use the ATXMEGA128B1-AN ordering code when checking package and temperature-grade options.
Where is the ATXMEGA128B1-AN pinout?
The ATXMEGA128B1-AN pinout is located in the pin-description table of the Microchip manufacturer datasheet for the 100-pin TQFP package. The device has 100 pins, including power, ground, general-purpose I/O, programming, clock, reset, USB, and peripheral functions. Use that table to assign every net because auxiliary functions on many I/O pins are selectable through port configuration registers.
What event system and DMA resources does ATXMEGA128B1-AN include?
The ATXMEGA128B1-AN includes a two-channel DMA controller and a four-channel event system. According to the Microchip product page, these resources work with the programmable multilevel interrupt controller and real-time counter. They are useful for deterministic data movement, timer synchronization, capture timing, and direct peripheral-to-peripheral event triggering that reduces CPU polling.
How do I program and debug an ATXMEGA128B1-AN?
The ATXMEGA128B1-AN can be programmed and debugged through the AVR debugging interface using MPLAB Snap. The Microchip product page states that MPLAB Snap connects through High-Speed USB 2.0 and reaches the target through an 8-pin SIL connector using two device I/O pins and the reset line. The same connection supports in-circuit debugging and in-circuit serial programming.
ATXMEGA128B1-AN vs ATXMEGA128A1-AU: which fits an existing 100-pin design?
The ATXMEGA128B1-AN is generally the closer choice when the design needs the B1 family's event system, USB Full-Speed device controller, DMA resources, and 128 KB of Flash. The ATXMEGA128A1-AU belongs to a different XMEGA family and should not be treated as a pin-compatible substitute without a complete review of pin multiplexing, supply requirements, peripherals, and firmware. Both are associated with 100-pin TQFP options, but matching the package alone does not establish drop-in compatibility.
When should I choose ATXMEGA128B1-AN over a smaller ATXMEGA device?
Choose the ATXMEGA128B1-AN when the firmware, USB interface, display control, and peripheral integration require the available 128 KB of Flash, 8 KB of SRAM, two DMA channels, and four event channels. A smaller ATXMEGA device may be preferable when those resources are unnecessary and board area, cost, or power is the dominant constraint. The selection should be based on memory consumption and required peripherals rather than clock speed alone.
Is ATXMEGA128B1-AN suitable for industrial control applications?
The ATXMEGA128B1-AN is suitable for many industrial control tasks that require deterministic embedded processing, USB connectivity, event-driven peripherals, and nonvolatile data storage. Its listed maximum operating temperature is 105 °C, and its 1.6 V to 3.6 V supply range supports multiple industrial system rails. The complete product still requires an industrial-grade qualification and environmental assessment for the intended installation.
What is the best drop-in replacement for ATXMEGA128B1-AN?
No independently verified drop-in replacement for the ATXMEGA128B1-AN was identified. Ordering-code changes such as ATXMEGA128B1-AUR represent related ordering options rather than a demonstrated engineering replacement, and ATXMEGA128B1-CU uses a different 100-CBGA package. A valid drop-in candidate must match the 100-pin TQFP land pattern, 1.6 V to 3.6 V operation, 32 MHz performance, memory arrangement, and required peripheral functions.
Can ATXMEGA128B1-CU replace ATXMEGA128B1-AN?
No, the ATXMEGA128B1-CU is not a drop-in replacement because it uses a 100-CBGA, 9 x 9 mm package rather than the ATXMEGA128B1-AN's 100-pin TQFP, 14 x 14 mm package. Although both devices are associated with the ATxmega128B1 family and the listed electrical range, their land patterns and PCB layouts differ. Replacement would therefore require a new footprint, solder process, and board-level verification.
Where can I buy ATXMEGA128B1-AN and check current price and lead time?
Use the Request a Quote form on this page to request current ATXMEGA128B1-AN pricing, stock status, minimum order quantity, and lead time. The quote request should identify the complete ATXMEGA128B1-AN ordering code, required quantity, and target package quantity. Current commercial terms can vary with inventory, packaging, order volume, and manufacturing schedule, so confirm them before committing the design to a procurement plan.
Is ATXMEGA128B1-AN in stock?
Current ATXMEGA128B1-AN stock should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies the ATxmega128B1 as an active device family, but production and distribution availability can change independently of product lifecycle status. Provide the required quantity, date code preference, and packaging needs with the request to obtain a current supply confirmation.

Справочные инженерные данные для ATXMEGA128B1-AN — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ATXMEGA128B1-AN for a 100-pin TQFP design that requires 128 KB of Flash, USB Full-Speed device connectivity, an integrated 4 x 40 segment LCD controller, deterministic event handling, and two DMA channels. It is particularly attractive for compact industrial, measurement, and USB peripheral products because several control and communication functions are integrated without external support devices. Select a smaller ATXMEGA when memory, USB, display capacity, or event resources are unnecessary and board area or cost is the priority. Do not choose ATXMEGA128B1-CU as a board-level substitute because its 100-CBGA footprint requires a different layout. Likewise, treat related ordering options and other XMEGA families as new design selections rather than automatic replacements, confirming package, temperature grade, peripheral multiplexing, voltage range, and firmware requirements before committing a change.

Сравнение с аналогами

Параметр Этот товар
Brand Microchip Technology
Package 100-pin TQFP, 14 x 14 mm
CPU Architecture 8/16-bit AVR enhanced RISC
Maximum Frequency 32 MHz
Maximum Throughput 32 MIPS
Flash Memory 128 KB
SRAM 8 KB
EEPROM 2 KB
Operating Voltage 1.6 V to 3.6 V
USB Interface USB Full-Speed device
DMA Channels 2 channels
Event System 4 channels

Ключевые отличия

  • Integration of USB, event system, DMA, and LCD control (против Basic 8-bit AVR devices)
  • Higher memory capacity within the ATxmega128B1 family (против ATXMEGA64B1 family devices)
  • Higher throughput for control and protocol workloads (против 8 MHz-class AVR devices)

Заметки по проектированию

Use the manufacturer pin-description table to assign all 100 TQFP terminals, including alternate-function, programming, reset, clock, USB, and power pins. Place the required input, output, and internal regulator decoupling capacitors close to their corresponding pins, following the recommended layout and loop area. Route USB signals as a controlled impedance interface if the board uses a USB connector, and keep external clock and programming nets away from sensitive analog inputs.

Design the 1.6 V to 3.6 V supply so it remains within the limits shown for the selected operating frequency, USB state, and analog configuration. Check startup, brownout, and power-supply sequencing requirements against the manufacturer electrical characteristics. The internal regulator and external decoupling network should follow the reference circuit; do not assume that a nominal 3.3 V rail guarantees identical timing or USB behavior at 1.8 V.

Assign the event-system, timer, comparator, and DMA resources during firmware planning because alternate-function mappings can constrain otherwise available I/O pins. Preserve pin access for JTAG or in-circuit serial programming after placement, and reserve enough board edge clearance for production programming fixtures. For mixed analog and digital functions, partition sensitive analog inputs away from switching nodes and maintain a continuous ground reference.

Do not treat a package-matched ATxmega128B1 ordering option as an automatic drop-in substitute without checking temperature grade, tape-and-reel or tray form, and ordering-code requirements. The ATXMEGA128B1-CU uses a different CBGA land pattern, so it cannot replace the TQFP device on the same PCB. Review fuse settings, clock configuration, boot behavior, and peripheral pin multiplexing when transferring firmware between related members.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer listing identifies the ATXMEGA128B1-AN as green, but the authoritative compliance declarations were not stated in the retrieved product information. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status for the exact ordering code before regulatory or vehicle qualification use.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ATXMEGA128B1-AN datasheet ATXMEGA128B1-AN datasheet pdf ATXMEGA128B1-AN pinout ATXMEGA128B1-AN TQFP footprint ATXMEGA128B1-AN specifications ATXMEGA128B1-AN programming ATXMEGA128B1-AN equivalent ATXMEGA128B1-AN drop-in replacement ATXMEGA128B1-AN vs ATXMEGA128A1-AU ATXMEGA128B1-AN price ATXMEGA128B1-AN stock Microchip ATXMEGA128B1-AN ATXMEGA128B1-AN USB LCD controller ATXMEGA128B1 32MHz 128KB Flash ATXMEGA128B1-AN application circuit

Связанные компоненты & термины

Microchip Technology ATXMEGA128B1-AN ATxmega128B1 ATXMEGA128B1-AUR ATXMEGA128B1-CU ATXMEGA128A1-AU AT90USB1287-MUR AVR XMEGA AVR enhanced RISC architecture 8/16-bit microcontroller embedded microcontroller semiconductor TQFP-100 TQFP package family surface-mount package USB Full-Speed device controller DMA controller event system segment LCD controller self-programming Flash EEPROM SRAM MPLAB Snap JTAG in-circuit serial programming
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ