ATXMEGA192D3-AU - 32MHz 192KB AVR Microcontroller | Microchip
Référence : ATXMEGA192D3-AU ✓ ActifATXMEGA192D3-AU Présentation
An 8/16-bit microcontroller is a compact computing device built around a RISC core, program flash, data memory, and peripherals such as timers, serial interfaces, analog converters, and interrupt controllers. Within the product hierarchy, the ATXMEGA192D3-AU belongs to the AVR XMEGA family and the D3 device series. Its enhanced RISC architecture executes instructions in a single clock cycle and targets throughput approaching 1 MIPS per MHz while supporting low-power operation.
Key device features include 192 KB of ISP flash with an 8 KB boot-code section, 16 KB of SRAM, four-channel event system, programmable multi-level interrupt controller, and up to 50 general-purpose I/O lines. The real-time counter and five flexible 16-bit timer/counter channels provide capture, compare, and PWM functions. Depending on the exact device variant and package mapping, the family also supports communication and analog peripherals suited to control-panel, sensor-hub, and industrial interface designs.
The D3 architecture is intended for applications requiring more peripheral integration and timer resources than conventional 8-bit AVR devices while retaining a familiar AVR development environment. Read-while-write flash capability allows the system to update program data without pausing normal execution in supported sections. The 1.6 V to 3.6 V operating range supports low-voltage industrial, consumer, and embedded systems, while the 32 MHz clock provides headroom for protocol handling and deterministic control loops.
Typical uses include data acquisition systems, programmable control panels, communications gateways, motor and power-system controllers, industrial sensor nodes, and compact human-machine interfaces. The 16-bit timers make the device particularly suitable for frequency measurement, waveform generation, and precise PWM motor control. Its 50 I/O lines also reduce the need for external input/output expanders in multi-channel designs.
When laying out the board, keep decoupling capacitors adjacent to the supply pins and route the 32 MHz clock with short, controlled-impedance traces. Confirm the exact peripheral-to-pin assignments in the manufacturer pin-description table before assigning connector signals. Firmware development should also include brownout, watchdog, and clock-startup configuration because these settings directly affect safe field operation.
This page combines manufacturer device details, distributor listings, verified price evidence, package information, drop-in alternatives, and application-focused engineering guidance. It highlights the practical differences between the D3 and A3 device variants while keeping PCB-reuse decisions tied to verified package and parametric constraints.
Alternatives de remplacement direct pour ATXMEGA192D3-AU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
ATXMEGA192A3-AU
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATXMEGA192A3U-AUR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATXMEGA192D3-AU Valeurs maximales et caractéristiques électriques
| Architecture | AVR enhanced RISC, 8/16-bit |
| Fréquence d'horloge maximale | 32 MHz |
| Flash Memory | 192 KB ISP flash |
| Boot Loader Section | 8 KB |
| SRAM | 16 KB |
| EEPROM | 2 KB |
| General-Purpose I/O Lines | Up to 50 |
| Timer/Counter Channels | 5 flexible 16-bit timer/counters with compare and PWM |
| Real-Time Counter | 1 x 16-bit |
| Event System | 4 channels |
| Interrupt Controller | Programmable multi-level interrupt controller |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Boîtier | 64-pin TQFP, 14 x 14 mm |
| Type de montage | Surface mount |
| Temperature Grade | Industrial temperature |
| Flash Read-While-Write | Supported |
| Statut RoHS | Compliant |
| Lead-Free Status | Lead-free |
Guide de configuration des broches du ATXMEGA192D3-AU 64-pin tqfp, 14 x 14 mm
Configuration des broches du ATXMEGA192D3-AU (boîtier 64-pin tqfp, 14 x 14 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATXMEGA192D3-AU.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATXMEGA192D3-AU convient pour 6 applications: Industrial Data Acquisition, Motor and PWM Control, Programmable Control Panel, Communications Gateway, Programmable Logic Controller, IoT Sensor Node.
Industrial Data Acquisition
The ATXMEGA192D3-AU fits multi-channel measurement and industrial data-acquisition systems because it provides 192 KB of flash, 16 KB of SRAM, up to 50 general-purpose I/O lines, and five 16-bit timer/counter channels. The counters can support input capture, frequency measurement, and timing tasks while the event system routes signals between peripherals with less CPU intervention. Its 1.6 V to 3.6 V operating range accommodates 1.8 V, 2.5 V, and 3.3 V sensor interfaces. Place local decoupling close to each supply pin and use the manufacturer pin-description table to assign isolated analog and digital inputs.
Recommandé
Motor and PWM Control
The ATXMEGA192D3-AU is suitable for deterministic motor, valve, and LED-control systems because its five flexible 16-bit timer/counters provide compare and PWM modes alongside a dedicated 16-bit real-time counter. A 32 MHz clock allows the control loop to combine timing functions with communication and supervisory tasks, while the 192 KB flash provides room for tables, fault handling, and field-upgrade logic. The 1.6 V to 3.6 V range supports mixed-signal designs, although gate-driver voltage requirements may require a separate regulator. Validate PWM frequency, dead time, and fault shutdown paths against the selected external driver.
Recommandé
Programmable Control Panel
The ATXMEGA192D3-AU can serve as the central controller in a programmable operator panel or compact HMI because the 64-pin TQFP package exposes up to 50 I/O lines and the D3 series provides five timer/counters plus a four-channel event system. The 192 KB flash and 16 KB SRAM support menu logic, debouncing, indicator control, event logging, and communication protocols without requiring a separate processor. Its 1.6 V to 3.6 V supply range simplifies rail selection in mixed-voltage panels. Keep display and touch-controller traces away from the clock network, and validate the pin mapping for every used peripheral rather than assuming an interchangeable XMEGA layout.
Recommandé
Communications Gateway
The ATXMEGA192D3-AU is appropriate for a compact protocol converter or communications gateway where a 32 MHz AVR core, 192 KB of flash, and 16 KB of SRAM must handle framing, checksums, and local buffering. Its multi-level interrupt controller and event system help coordinate serial traffic and timers without excessive polling overhead. The device operates from 1.6 V to 3.6 V, allowing a low-power interface section, while the 64-pin TQFP provides access to multiple serial and general-purpose I/O lines. Specify termination, ESD protection, and isolation requirements at the connector, and confirm supported clock and peripheral configurations in the device documentation.
Recommandé
Programmable Logic Controller
The ATXMEGA192D3-AU can implement a compact PLC-like controller for sequencing, monitoring, and actuator control because it combines 192 KB of program flash, 16 KB of SRAM, five 16-bit timer/counters, and a four-channel event system. The timer resources support repetitive tasks, pulse measurement, and PWM outputs, while the event system can connect peripheral actions with limited CPU involvement. The 1.6 V to 3.6 V operating range supports industrial control boards that use 3.3 V logic. Design the scan cycle with watchdog and brownout recovery in mind, isolate field wiring from logic, and validate every timer, serial, and interrupt assignment against the exact package pinout.
Recommandé
IoT Sensor Node
The ATXMEGA192D3-AU supports compact IoT and industrial sensor-node designs that need more local processing and timer flexibility than a basic 8-bit MCU. Its 32 MHz clock and AVR enhanced RISC core can handle protocol framing and sensor conditioning logic, while read-while-write flash allows supported data regions to be modified during operation. Up to 50 I/O lines reduce external expander requirements, and the 1.6 V minimum supply voltage helps accommodate low-energy designs. Use the low-power modes and brownout settings from the manufacturer documentation, keep the 32 MHz clock trace short, and isolate radio or sensor interfaces with appropriate grounding and filtering.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATXMEGA192D3-AU — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATXMEGA192A3-AU | ATXMEGA192A3U-AUR |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (14x14) | 64-TQFP (14x14) | 64-TQFP (14x14) |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz |
| Operating Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Flash Memory | 192 KB | 192 KB | 192 KB |
| SRAM | 16 KB | 16 KB | 16 KB |
| Programming and Ordering Code | ATXMEGA192D3-AU | ATXMEGA192A3-AU | ATXMEGA192A3U-AUR |
Principaux différenciateurs
- D3-series event and timing resources (vs ATXMEGA192A3-AU)
- Large on-chip memory for control firmware (vs ATXMEGA192A3-AU)
- Low-voltage operation with 32 MHz performance (vs ATXMEGA192A3U-AUR)
Notes de conception
Decouple each supply connection with the capacitance specified in the manufacturer datasheet and place the components directly beside the package pins. The device supports a 1.6 V to 3.6 V operating range, but the allowable clock frequency and peripheral current can vary with voltage. Estimate the worst-case supply demand from active processing, timers, analog converters, and communication outputs before selecting the regulator and copper area.
Route the 32 MHz clock with the shortest practical path, provide a continuous ground reference beneath it, and keep switching-node and high-current load paths away from sensitive analog inputs. The XMEGA D3 event system and timer/counters can trigger on fast edges, so input filtering may be necessary when long PCB traces pick up noise. Confirm peripheral multiplexing in the pin-description table before assigning connector signals.
Do not assume that every 64-pin XMEGA device has identical peripheral multiplexing. The D3 and A3 families share a package format but differ in timer and event-system capabilities, so changing between them can require code, interrupt-vector, and board-routing reviews. Firmware should also enable the watchdog and brownout behavior appropriate to the field application and verify recovery behavior across power interruptions.
When programming the device, confirm the boot-interface configuration and ensure that external programming tools or production fixtures do not conflict with application-level pins. Review the read-while-write flash limitations before placing nonvolatile parameters in a boot section. Production programming should also verify the configured lock bits and user-signature area so a completed unit cannot be reprogrammed unintentionally.
Informations de conformité
A distributor product listing identifies the ATXMEGA192D3-AU as RoHS-compliant, lead-free, and green. REACH, halogen-free status, and conflict-minerals status are not stated in the available manufacturer or distributor data.