Microchip Technology

ATXMEGA192D3-AU - 32MHz 192KB AVR Microcontroller | Microchip

MPN: ATXMEGA192D3-AU ✓ Aktif
1.6 V to 3.6 V Vdss 64-pin TQFP, 14 x 14 mm Package 32 MHz Speed 192 KB ISP flash Memory
MOQ: 1 |

ATXMEGA192D3-AU Genel Bakış

The Microchip Technology ATXMEGA192D3-AU is a low-power 8/16-bit AVR XMEGA D3 microcontroller with 192 KB of ISP flash memory, 16 KB of SRAM, a 32 MHz maximum clock, and a 64-pin TQFP package. It combines the AVR enhanced RISC architecture with read-while-write flash operation and a rich peripheral set for embedded control, communications, and real-time control applications.

An 8/16-bit microcontroller is a compact computing device built around a RISC core, program flash, data memory, and peripherals such as timers, serial interfaces, analog converters, and interrupt controllers. Within the product hierarchy, the ATXMEGA192D3-AU belongs to the AVR XMEGA family and the D3 device series. Its enhanced RISC architecture executes instructions in a single clock cycle and targets throughput approaching 1 MIPS per MHz while supporting low-power operation.

Key device features include 192 KB of ISP flash with an 8 KB boot-code section, 16 KB of SRAM, four-channel event system, programmable multi-level interrupt controller, and up to 50 general-purpose I/O lines. The real-time counter and five flexible 16-bit timer/counter channels provide capture, compare, and PWM functions. Depending on the exact device variant and package mapping, the family also supports communication and analog peripherals suited to control-panel, sensor-hub, and industrial interface designs.

The D3 architecture is intended for applications requiring more peripheral integration and timer resources than conventional 8-bit AVR devices while retaining a familiar AVR development environment. Read-while-write flash capability allows the system to update program data without pausing normal execution in supported sections. The 1.6 V to 3.6 V operating range supports low-voltage industrial, consumer, and embedded systems, while the 32 MHz clock provides headroom for protocol handling and deterministic control loops.

Typical uses include data acquisition systems, programmable control panels, communications gateways, motor and power-system controllers, industrial sensor nodes, and compact human-machine interfaces. The 16-bit timers make the device particularly suitable for frequency measurement, waveform generation, and precise PWM motor control. Its 50 I/O lines also reduce the need for external input/output expanders in multi-channel designs.

When laying out the board, keep decoupling capacitors adjacent to the supply pins and route the 32 MHz clock with short, controlled-impedance traces. Confirm the exact peripheral-to-pin assignments in the manufacturer pin-description table before assigning connector signals. Firmware development should also include brownout, watchdog, and clock-startup configuration because these settings directly affect safe field operation.

This page combines manufacturer device details, distributor listings, verified price evidence, package information, drop-in alternatives, and application-focused engineering guidance. It highlights the practical differences between the D3 and A3 device variants while keeping PCB-reuse decisions tied to verified package and parametric constraints.

Drop-in alternatifler için ATXMEGA192D3-AU — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

ATXMEGA192A3-AU

✅ Yerleştirme
📦 64-TQFP (14x14)
Same 64-TQFP format and 192 KB family, but the A3 device uses a different D3/A3 peripheral arrangement; event-system and timer-feature availability differs

📋 Katalogda Olmayan Referans Alternatifi

ATXMEGA192A3U-AUR

✅ Yerleştirme
📦 64-TQFP (14x14)
Same 192 KB A3-family device in a 64-TQFP format, but it lacks the D3 event-system and timer/counter feature set and uses a different ordering code

📋 Katalogda Olmayan Referans Alternatifi

ATXMEGA192D3-AU Maksimum Değerlendirmeler & Elektriksel Özellikler

Architecture AVR enhanced RISC, 8/16-bit
Azami Saat Hızı 32 MHz
Flash Memory 192 KB ISP flash
Boot Loader Section 8 KB
SRAM 16 KB
EEPROM 2 KB
General-Purpose I/O Lines Up to 50
Timer/Counter Channels 5 flexible 16-bit timer/counters with compare and PWM
Real-Time Counter 1 x 16-bit
Event System 4 channels
Interrupt Controller Programmable multi-level interrupt controller
Supply Voltage Range 1.6 V to 3.6 V
Paket 64-pin TQFP, 14 x 14 mm
Montaj Türü Surface mount
Temperature Grade Industrial temperature
Flash Read-While-Write Supported
RoHS Durumu Compliant
Lead-Free Status Lead-free

ATXMEGA192D3-AU 64-pin tqfp, 14 x 14 mm Pin Yapısı Kılavuzu

ATXMEGA192D3-AU (64-pin tqfp, 14 x 14 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-pin tqfp, 14 x 14 mm paket pin çizelgesi için ATXMEGA192D3-AU

Ayrıntılı pin çıkış verisi mevcut değil: ATXMEGA192D3-AU.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ATXMEGA192D3-AU için uygundur 6 uygulamas: Industrial Data Acquisition, Motor and PWM Control, Programmable Control Panel, Communications Gateway, Programmable Logic Controller, IoT Sensor Node.

🏭

Industrial Data Acquisition

The ATXMEGA192D3-AU fits multi-channel measurement and industrial data-acquisition systems because it provides 192 KB of flash, 16 KB of SRAM, up to 50 general-purpose I/O lines, and five 16-bit timer/counter channels. The counters can support input capture, frequency measurement, and timing tasks while the event system routes signals between peripherals with less CPU intervention. Its 1.6 V to 3.6 V operating range accommodates 1.8 V, 2.5 V, and 3.3 V sensor interfaces. Place local decoupling close to each supply pin and use the manufacturer pin-description table to assign isolated analog and digital inputs.

🔧

Motor and PWM Control

The ATXMEGA192D3-AU is suitable for deterministic motor, valve, and LED-control systems because its five flexible 16-bit timer/counters provide compare and PWM modes alongside a dedicated 16-bit real-time counter. A 32 MHz clock allows the control loop to combine timing functions with communication and supervisory tasks, while the 192 KB flash provides room for tables, fault handling, and field-upgrade logic. The 1.6 V to 3.6 V range supports mixed-signal designs, although gate-driver voltage requirements may require a separate regulator. Validate PWM frequency, dead time, and fault shutdown paths against the selected external driver.

📺

Programmable Control Panel

The ATXMEGA192D3-AU can serve as the central controller in a programmable operator panel or compact HMI because the 64-pin TQFP package exposes up to 50 I/O lines and the D3 series provides five timer/counters plus a four-channel event system. The 192 KB flash and 16 KB SRAM support menu logic, debouncing, indicator control, event logging, and communication protocols without requiring a separate processor. Its 1.6 V to 3.6 V supply range simplifies rail selection in mixed-voltage panels. Keep display and touch-controller traces away from the clock network, and validate the pin mapping for every used peripheral rather than assuming an interchangeable XMEGA layout.

🌐

Communications Gateway

The ATXMEGA192D3-AU is appropriate for a compact protocol converter or communications gateway where a 32 MHz AVR core, 192 KB of flash, and 16 KB of SRAM must handle framing, checksums, and local buffering. Its multi-level interrupt controller and event system help coordinate serial traffic and timers without excessive polling overhead. The device operates from 1.6 V to 3.6 V, allowing a low-power interface section, while the 64-pin TQFP provides access to multiple serial and general-purpose I/O lines. Specify termination, ESD protection, and isolation requirements at the connector, and confirm supported clock and peripheral configurations in the device documentation.

⚙️

Programmable Logic Controller

The ATXMEGA192D3-AU can implement a compact PLC-like controller for sequencing, monitoring, and actuator control because it combines 192 KB of program flash, 16 KB of SRAM, five 16-bit timer/counters, and a four-channel event system. The timer resources support repetitive tasks, pulse measurement, and PWM outputs, while the event system can connect peripheral actions with limited CPU involvement. The 1.6 V to 3.6 V operating range supports industrial control boards that use 3.3 V logic. Design the scan cycle with watchdog and brownout recovery in mind, isolate field wiring from logic, and validate every timer, serial, and interrupt assignment against the exact package pinout.

🧩

IoT Sensor Node

The ATXMEGA192D3-AU supports compact IoT and industrial sensor-node designs that need more local processing and timer flexibility than a basic 8-bit MCU. Its 32 MHz clock and AVR enhanced RISC core can handle protocol framing and sensor conditioning logic, while read-while-write flash allows supported data regions to be modified during operation. Up to 50 I/O lines reduce external expander requirements, and the 1.6 V minimum supply voltage helps accommodate low-energy designs. Use the low-power modes and brownout settings from the manufacturer documentation, keep the 32 MHz clock trace short, and isolate radio or sensor interfaces with appropriate grounding and filtering.

What are the key specifications of ATXMEGA192D3-AU?
The ATXMEGA192D3-AU is a 32 MHz AVR XMEGA D3 microcontroller with 192 KB of ISP flash, 16 KB of SRAM, 2 KB of EEPROM, and a 1.6 V to 3.6 V supply range. Microchip describes the device as a peripheral-rich, low-power 8/16-bit CMOS microcontroller with five 16-bit timer/counters, a four-channel event system, and a 64-pin TQFP package.
Where can I download the ATXMEGA192D3-AU datasheet PDF?
The ATXMEGA192D3-AU documentation is available through the Microchip ATxmega192D3 product page and the device manufacturer documentation area. Use the pin-description table in the manufacturer datasheet to verify the 64 TQFP assignments before laying out the PCB, and use the electrical-characteristics section for operating limits, timing, and current-consumption figures.
Where can I find the ATXMEGA192D3-AU pinout?
The ATXMEGA192D3-AU pinout is documented in the pin-description table of the manufacturer datasheet. The device is supplied in a 64-pin TQFP package measuring 14 x 14 mm, with pin 1 indicated by the package marking convention. Assign connector and peripheral signals only after checking the complete package diagram, including power, ground, programming, and clock pins.
What is the ATXMEGA192D3-AU operating voltage range?
The ATXMEGA192D3-AU operates from 1.6 V to 3.6 V according to the Microchip product listing and distributor specifications. This range supports low-voltage embedded systems, including 1.8 V, 2.5 V, and 3.3 V designs. Confirm the selected clock speed, brownout settings, and peripheral load against the electrical-characteristics table before finalizing the power architecture.
How much flash and SRAM does ATXMEGA192D3-AU have?
The ATXMEGA192D3-AU provides 192 KB of ISP flash, including an 8 KB boot-code section, and 16 KB of SRAM. Its read-while-write flash architecture permits program-data modification during operation in supported sections, while the 16 KB SRAM accommodates working data, protocol buffers, and real-time control state.
What peripherals are available on the ATXMEGA192D3-AU?
The device integrates five flexible 16-bit timer/counters with compare and PWM modes, a dedicated 16-bit real-time counter, a four-channel event system, and a programmable multi-level interrupt controller. Microchip also lists up to 50 general-purpose I/O lines. This combination makes the MCU appropriate for deterministic timing, waveform generation, and multi-channel control designs.
Is ATXMEGA192D3-AU suitable for industrial control applications?
Yes, the ATXMEGA192D3-AU is listed in an industrial temperature grade and combines a wide 1.6 V to 3.6 V supply range with extensive timer and event-system resources. Its 16-bit timer/counters and real-time counter support precision PWM, capture, and frequency measurement, while the 64-pin package provides access to up to 50 general-purpose I/O lines.
What is the difference between ATXMEGA192D3-AU and ATXMEGA192A3-AU?
The ATXMEGA192D3-AU belongs to the D3 device series, while the ATXMEGA192A3-AU belongs to the A3 series. Both are Microchip AVR XMEGA devices associated with the 192 KB family in 64-TQFP industrial-temperature options. The D3 series adds the higher-performance feature set, including a four-channel event system and five flexible timer/counters, so software and peripheral requirements should be checked before interchange.
When should I choose ATXMEGA192D3-AU over another XMEGA device?
Choose the ATXMEGA192D3-AU when a design needs 192 KB of flash, 16 KB of SRAM, 32 MHz operation, and the D3 series timing peripherals. It is a stronger fit than the 128 KB-class devices when program storage, working memory, or event-driven control performance is limiting. For a design already using the A3 series, however, retain the ATXMEGA192D3-AU when D3-specific timer or event-system features are required.
Is ATXMEGA192D3-AU a drop-in replacement for an A3-series MCU?
The ATXMEGA192A3-AU offers the closest same-package family comparison, but it should not be treated as a transparent drop-in replacement without verification. The ATXMEGA192D3-AU includes D3-series resources such as a four-channel event system and five flexible 16-bit timer/counters, while the A3 variant has a different peripheral arrangement. Review the pin-description table, clock configuration, interrupt mapping, and application code before substitution.
What is the best drop-in replacement for ATXMEGA192D3-AU?
The closest verified same-package alternative is the Microchip ATXMEGA192A3-AU, which shares the 64-TQFP industrial-temperature format and the 1.6 V to 3.6 V operating range. It is a functional-family alternative rather than a guaranteed software-transparent replacement because the D3 and A3 peripheral sets differ. Verify every used peripheral pin and recompile against the selected device headers before treating it as a drop-in upgrade path.
Can ATXMEGA192D3-AU replace ATXMEGA128D3-AU?
The ATXMEGA192D3-AU has 192 KB of flash, 50% more program memory than the 128 KB ATXMEGA128D3-AU, while both are associated with 64-TQFP XMEGA devices. A direct substitution should still be checked for pin, peripheral, and timing differences rather than assuming compatibility from flash capacity alone. The larger flash can also change linker placement, boot-section boundaries, and firmware size assumptions.
What can replace the ATXMEGA192D3-AU in a PCB redesign?
A verified same-brand starting point is the ATXMEGA192A3-AU in the same 64-TQFP format, but there is no cross-brand pin-compatible MCU established by the available cross-reference results. MCU substitutions also require boot-interface, clock, interrupt, analog, and timer-function verification, plus recompilation of application firmware. Start with the manufacturer cross-reference tool for a device-specific match rather than relying on package size alone.
Where can I buy ATXMEGA192D3-AU online?
The ATXMEGA192D3-AU can be ordered through the Request a Quote form on this page, which provides current commercial terms for the exact 64-pin TQFP orderable part. The manufacturer lists the device as the ATxmega192D3 family member, while distributor listings identify ATXMEGA192D3-AU with 192 KB flash and a 14 x 14 mm TQFP package. Use the quote form to confirm current inventory, lead time, and packaging.
What is the price of ATXMEGA192D3-AU?
Current commercial pricing for the ATXMEGA192D3-AU is obtained through the Request a Quote form on this page rather than a static price table. Distributor listings show the part as a 192 KB, 32 MHz AVR microcontroller in a 64-pin TQFP package, and one listing identifies it as in stock. The quote request confirms the exact unit price, quantity breaks, current lead time, and shipment availability.
How long is the lead time for ATXMEGA192D3-AU?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Distributor records identify the ATXMEGA192D3-AU as available, but availability can vary with order quantity, date, and regional inventory. The quote workflow provides a current answer for the exact MPN without relying on an outdated catalog lead-time estimate.
Is ATXMEGA192D3-AU in stock?
Stock status changes frequently, so use the Request a Quote form on this page for a current availability confirmation. A distributor listing describes the ATXMEGA192D3-AU as an in-stock component, and another listing states that it ships today. Those observations indicate market availability, but the quote form should confirm the quantity you need and its current sourcing status.

Mühendislik referans verileri: ATXMEGA192D3-AU — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the ATXMEGA192D3-AU when the design needs the D3 series event system, five flexible 16-bit timer/counters, a dedicated real-time counter, and the full 192 KB flash and 16 KB SRAM memory budget. It is particularly appropriate for deterministic PWM, timing, acquisition, and protocol-handling designs that will not fit comfortably within a smaller XMEGA memory configuration. The ATXMEGA192A3-AU is the closest same-package family option when its peripheral set satisfies the design and a board or firmware change is acceptable. Do not select the ATXMEGA192A3U-AUR solely for its ordering code; treat it as an A3-family alternative and verify all used peripheral pins. No cross-brand drop-in replacement is established because MCU compatibility depends on peripheral multiplexing, clocking, boot behavior, and application code as well as package dimensions.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ATXMEGA192A3-AU ATXMEGA192A3U-AUR
Brand Microchip Technology Microchip Technology Microchip Technology
Package 64-TQFP (14x14) 64-TQFP (14x14) 64-TQFP (14x14)
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz
Operating Voltage Range 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V
Flash Memory 192 KB 192 KB 192 KB
SRAM 16 KB 16 KB 16 KB
Programming and Ordering Code ATXMEGA192D3-AU ATXMEGA192A3-AU ATXMEGA192A3U-AUR

Ana Farklılayıcılar

  • D3-series event and timing resources (karşılaştırma:ATXMEGA192A3-AU)
  • Large on-chip memory for control firmware (karşılaştırma:ATXMEGA192A3-AU)
  • Low-voltage operation with 32 MHz performance (karşılaştırma:ATXMEGA192A3U-AUR)

Tasarım Notları

Decouple each supply connection with the capacitance specified in the manufacturer datasheet and place the components directly beside the package pins. The device supports a 1.6 V to 3.6 V operating range, but the allowable clock frequency and peripheral current can vary with voltage. Estimate the worst-case supply demand from active processing, timers, analog converters, and communication outputs before selecting the regulator and copper area.

Route the 32 MHz clock with the shortest practical path, provide a continuous ground reference beneath it, and keep switching-node and high-current load paths away from sensitive analog inputs. The XMEGA D3 event system and timer/counters can trigger on fast edges, so input filtering may be necessary when long PCB traces pick up noise. Confirm peripheral multiplexing in the pin-description table before assigning connector signals.

Do not assume that every 64-pin XMEGA device has identical peripheral multiplexing. The D3 and A3 families share a package format but differ in timer and event-system capabilities, so changing between them can require code, interrupt-vector, and board-routing reviews. Firmware should also enable the watchdog and brownout behavior appropriate to the field application and verify recovery behavior across power interruptions.

When programming the device, confirm the boot-interface configuration and ensure that external programming tools or production fixtures do not conflict with application-level pins. Review the read-while-write flash limitations before placing nonvolatile parameters in a boot section. Production programming should also verify the configured lock bits and user-signature area so a completed unit cannot be reprogrammed unintentionally.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Yes
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

A distributor product listing identifies the ATXMEGA192D3-AU as RoHS-compliant, lead-free, and green. REACH, halogen-free status, and conflict-minerals status are not stated in the available manufacturer or distributor data.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ATXMEGA192D3-AU ATXMEGA192D3-AU datasheet ATXMEGA192D3-AU pinout ATXMEGA192D3-AU datasheet pdf ATXMEGA192D3-AU equivalent ATXMEGA192D3-AU replacement ATXMEGA192D3-AU cross reference ATXMEGA192D3-AU vs ATXMEGA192A3-AU ATXMEGA192D3-AU TQFP-64 footprint ATXMEGA192D3-AU 192KB 32MHz Microchip ATXMEGA192D3-AU ATXMEGA192D3-AU price ATXMEGA192D3-AU stock ATXMEGA192D3-AU PWM control

İlgili Bileşenler ve Terimler

Microchip Technology ATXMEGA192D3-AU ATxmega192D3 ATXMEGA192A3-AU ATXMEGA192A3U-AUR AVR AVR XMEGA XMEGA D3 enhanced RISC architecture 8/16-bit microcontroller microcontroller embedded controller semiconductor TQFP-64 surface mount 32 MHz 192 KB ISP flash 16 KB SRAM read-while-write flash four-channel event system 16-bit timer/counter PWM multi-level interrupt controller industrial control IoT sensor node
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle