ATXMEGA32A4U-AN - 32MHz AVR XMEGA MCU | Microchip Technology
Référence : ATXMEGA32A4U-AN ✓ ActifATXMEGA32A4U-AN Présentation
An AVR XMEGA microcontroller combines an enhanced RISC core with an advanced event system and hardware peripherals designed to reduce interrupt overhead. The XMEGA family sits within the broader 8/16-bit MCU hierarchy, combining flash-programmable firmware storage, SRAM, EEPROM, timers, serial interfaces, analog conversion, and direct GPIO control. Compared with simpler 8-bit AVR devices, the ATXMEGA32A4U-AN provides four-channel DMA, an eight-channel event system, a programmable multi-level interrupt controller, and extensive timer resources for responsive control systems.
Key features include 34 general-purpose I/O lines, five flexible 16-bit Timer/Counters with compare and PWM modes, five USART modules, a 16-bit Real Time Counter, two Two-Wire Interfaces, two Serial Peripheral Interfaces, and up to 32 analog input channels. Its 32 KB Flash includes a dedicated 4 KB boot-code section for firmware update or startup routines. The internal 4 KB SRAM supports event-driven data movement without requiring every transfer to pass through the CPU.
The four-channel DMA controller can transfer data among memory and peripherals while the CPU performs other tasks. Combined with the eight-channel event system, this architecture is useful when deterministic timing is required without frequent polling. The programmable multi-level interrupt controller supports prioritized event handling, while the RTC and five 16-bit timers provide dedicated timing resources for control, communication, and periodic measurement functions.
Typical uses include industrial control modules, data acquisition units, communications equipment, low-power sensor nodes, motor-control peripherals, and compact embedded gateways. The 44-TQFP package provides more I/O than a small leadless MCU, making it practical for designs that need several serial interfaces alongside sensor and actuator connections. Its 3.6 V maximum listed operating voltage also supports integration with common low-voltage industrial and embedded systems.
PCB design should place decoupling capacitors close to each VDD connection, preserve a continuous ground plane, and route sensitive analog inputs away from fast-switching nodes. Firmware should use the event system and DMA where timing paths overlap, while the boot section should contain only code required during startup. The 44-TQFP footprint also demands careful assembly planning because its fine lead pitch is less forgiving than a coarse-pitch package.
Alternatives de remplacement direct pour ATXMEGA32A4U-AN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATXMEGA32A4U-AN (même facteur de forme et même empreinte) — différant par Boot Code Section, DMA Channels, Event System Channels, External Bus Interface, Maximum Operating Temperature.
ATXMEGA32A4U-ANR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATXMEGA32A4U-AU
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATXMEGA32A4U-M7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATXMEGA32A4U-M7R
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATXMEGA32A4U-MH
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATXMEGA32A4U-AN Valeurs maximales et caractéristiques électriques
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Fréquence d'horloge maximale | 32 MHz |
| Flash Program Memory | 32 KB (16K x 16) |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 1 KB |
| Tension d'alimentation de fonctionnement | 1.6 V to 3.6 V |
| Maximum Operating Temperature | 105 °C |
| General-Purpose I/O Lines | 34 |
| DMA Channels | 4 channels |
| Event System Channels | 8 channels |
| Timer/Counters | 5 flexible 16-bit Timer/Counters |
| USART Modules | 5 |
| Two-Wire Interfaces | 2 |
| Serial Peripheral Interfaces | 2 |
| Real Time Counter | 16-bit RTC |
| Analog Input Channels | Up to 32 channels |
| External Bus Interface | Supported |
| Boîtier | 44-TQFP, 10 mm x 10 mm |
| Type de montage | Surface mount |
| Program Memory Type | Self-programming Flash with read-while-write capability |
Guide de configuration des broches du ATXMEGA32A4U-AN 44-tqfp, 10 mm x 10 mm
Configuration des broches du ATXMEGA32A4U-AN (boîtier 44-tqfp, 10 mm x 10 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATXMEGA32A4U-AN.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATXMEGA32A4U-AN convient pour 6 applications: Industrial Data Acquisition, Communications Gateway, Motor and Actuator Control, Low-Power Sensor Node, Real-Time Control System, Programmable Logic and Sensor Interface.
Industrial Data Acquisition
The ATXMEGA32A4U-AN fits industrial acquisition equipment that must combine multiple analog inputs with deterministic sampling and serial data transfer. Its up to 32 analog channels and five flexible 16-bit Timer/Counters provide resources for sensor conditioning, periodic sampling, and time-base generation, while the four-channel DMA controller can move sampled data with limited CPU intervention. The eight-channel event system can trigger sampling and conversion sequences from timer or external events, reducing jitter and firmware polling. At 32 MHz with 4 KB SRAM, the device can maintain acquisition pipelines and protocol buffers while its 1.6 V to 3.6 V supply range supports low-voltage analog front ends.
Recommandé
Communications Gateway
The ATXMEGA32A4U-AN is appropriate for compact communications equipment requiring several serial interfaces without a large external peripheral set. Five USARTs can connect standard serial devices, while two SPI interfaces support higher-speed peripherals and two Two-Wire Interfaces serve sensors or configuration devices. The event system can connect UART, SPI, timer, and DMA activity, allowing received data to trigger memory transfers without continuous processor polling. Its 32 KB Flash supports protocol and application firmware, and the 4 KB SRAM can accommodate packet buffers for gateway designs operating from a 1.6 V to 3.6 V supply.
Recommandé
Motor and Actuator Control
The ATXMEGA32A4U-AN can serve as the timing and control core in motor, valve, and actuator modules because it combines five 16-bit Timer/Counters with compare and PWM modes. Timers can generate precise pulse trains independently of the main application loop, while the event system links timer events to DMA and other peripherals. Its 34 GPIO lines leave room for direction controls, fault inputs, encoder signals, and communications. The 1.6 V to 3.6 V operating range supports low-voltage logic, although the device must be paired with an appropriate transistor or motor-driver stage rather than driving loads directly.
Recommandé
Low-Power Sensor Node
The ATXMEGA32A4U-AN is suitable for low-power sensor nodes that need more local processing than a basic 8-bit MCU. Four DMA channels and the eight-channel event system reduce the processor workload associated with sensor acquisition and background transfers, while 1 KB EEPROM preserves small configuration parameters across power cycles. Its 32 KB Flash can hold local filtering, protocol, and diagnostic routines, and the 4 KB SRAM supports transient measurement data. The 1.6 V to 3.6 V supply range also supports energy-conscious designs, although battery life depends on the selected clock, sleep mode, sensor duty cycle, and radio activity.
Recommandé
Real-Time Control System
The ATXMEGA32A4U-AN is a strong fit for deterministic control systems that coordinate several timed functions. Five 16-bit Timer/Counters can manage periodic control, capture, compare, and PWM tasks, while the 16-bit Real Time Counter provides a dedicated timekeeping resource. The programmable multi-level interrupt controller allows urgent events to take priority, and DMA can transfer control data without occupying the CPU during each event. With 34 GPIO lines, the controller can support multiple inputs, outputs, and communication links. Firmware should assign time-critical signals through timer and event peripherals rather than software polling to preserve timing margins.
Recommandé
Programmable Logic and Sensor Interface
The ATXMEGA32A4U-AN can consolidate several peripheral functions in compact embedded equipment. Two SPI interfaces support external sensors, flash memory, or display controllers, while the two Two-Wire Interfaces provide additional low-speed buses for sensors and configuration devices. The external bus interface expands the design to compatible external memory or peripheral components, and up to 32 analog channels support mixed-signal measurements. Its 44-TQFP package exposes substantially more I/O than a small leadless MCU, making it practical for configurable acquisition panels, industrial sensor interfaces, and embedded test fixtures requiring several communication standards on one board.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATXMEGA32A4U-AN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATXMEGA32A4U-ANR | ATXMEGA32A4U-AU | ATXMEGA32A4U-M7 | ATXMEGA32A4U-M7R | ATXMEGA32A4U-MH |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (10x10) | 44-TQFP (10x10) | 44-TQFP (10x10) | 44-TQFP (10x10) | 44-TQFP (10x10) | 44-TQFP (10x10) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| General-Purpose I/O | 34 lines | 34 lines | 34 lines | 34 lines | 34 lines | 34 lines |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| USART Modules | 5 | 5 | 5 | 5 | 5 | 5 |
Principaux différenciateurs
- High peripheral density in a single controller (vs ATXMEGA16E5-ANR)
- Event-driven data movement reduces CPU involvement (vs ATXMEGA32A4U-AU)
- Dedicated timing resources reduce polling (vs ATXMEGA32A4U-MH)
- Mixed-signal integration in a 10 mm square package (vs ATXMEGA32A4U-M7R)
Notes de conception
Place the local 0.1 µF ceramic decoupling capacitor beside each VDD connection and retain the manufacturer-recommended bulk capacitance near the supply entry. The ATXMEGA32A4U-AN has multiple supply pins, including pins 4, 5, 22, and 23, and each connection should have a low-inductance path to the ground plane. Avoid sharing a narrow supply trace among several pins, because simultaneous GPIO transitions can create transient current that causes local rail disturbance or false peripheral operation.
Use a continuous ground plane beneath the 44-TQFP and route analog inputs away from PWM outputs, clock signals, and switching-supply nodes. Keep the four VDD decoupling positions symmetric with the physical pin distribution, and use short, direct paths between the MCU, crystal or clock source, and supporting components. The package has a 10 mm x 10 mm footprint with fine lead pitch, so verify pad dimensions, solder mask clearance, and assembly rotation against the manufacturer package drawing before releasing artwork.
Assign timing-sensitive functions to hardware timers and use the event system to trigger DMA or peripheral operations instead of relying on interrupt latency for waveform generation. The MCU provides five 16-bit Timer/Counters, four DMA channels, and an eight-channel event system specifically for this type of architecture. Configure unused GPIO inputs with an appropriate pull or external clamp, and confirm analog source impedance against the ADC acquisition requirements before optimizing sampling speed.
Do not substitute a 32-pin or 48-pin ATxmega32A4U package without redrawing the PCB and reassigning every peripheral signal. Also verify the meaning of the ordering suffix before changing ATXMEGA32A4U-AN to another ATxmega32A4U code: reel orientation, temperature grade, marking, and assembly requirements may differ even when the memory sizes and core architecture match. Production firmware should be tested with the exact ordering code and package being assembled.
Informations de conformité
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were stated in the manufacturer and distributor information used for this product record.