BCM2711ZPKFSB06C0T - Quad-Core A72 1.5GHz SoC | Broadcom
Référence : BCM2711ZPKFSB06C0T ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $35 | $35,00 |
| 10 | $33.5 | $335,00 |
| 100 | $31.8 | $3 180,00 |
| 500 | $30.2 | $15 100,00 |
| 1 000 | $28.7 | $28 700,00 |
BCM2711ZPKFSB06C0T Présentation
A system-on-chip integrates an entire computer - CPU cores, GPU, memory controller, peripheral controllers, and interconnect - onto a single silicon die. SoCs sit at the top of the embedded-computing hierarchy, combining a microprocessor, graphics processor, and microcontroller-class peripherals (GPIO, SPI, I2C, UART, PWM, DMA) into one power-optimized device. The BCM2711 is classified as an application processor / multimedia SoC for embedded and single-board-computer applications.
Key features include four 64-bit ARM Cortex-A72 cores with out-of-order execution, hardware H.265 (HEVC) 4Kp60 video decode, dual-display support via two HDMI interfaces at up to 4K resolution, and a substantially upgraded peripheral set over the earlier BCM2837: a PCIe 2.0 lane (used for Gigabit Ethernet via an external LAN controller), native USB 3.0, a redesigned GPIO bank with more flexible alternate functions, and up to 8GB LPDDR4 SDRAM support on the same die via package-on-package memory stacking in end products.
Architecturally, the BCM2711 uses an AMBA AXI-compatible interconnect. According to the official BCM2711 ARM Peripherals datasheet, the AXI system does not always return read data in-order; the GPU contains special logic to cope with out-of-order arrivals while the ARM core requires ordered access - a consideration critical for bare-metal OS porting. Peripherals documented in the datasheet include timers, interrupt controller, GPIO, USB, PCM/I2S, DMA controller, and I2C masters.
Typical applications are single-board computers (Raspberry Pi 4 Model B), compute modules (CM4), industrial gateways, digital signage and media players leveraging 4Kp60 HEVC decode, and embedded vision or kiosk systems.
Design consideration: the BCM2711 requires specific boot media (SPI boot EEPROM plus SD/eMMC) and a regulated core-voltage power tree; thermal design with a heat spreader or heatsink is recommended at sustained CPU load. Verify exact memory-density suffix and package dimensions against the Raspberry Pi technical data sheet before layout.
This page synthesizes the manufacturer peripherals documentation, technical data sheet references, drop-in variant analysis, and practical design notes not consolidated in any single manufacturer document.
Alternatives de remplacement direct pour BCM2711ZPKFSB06C0T — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec BCM2711ZPKFSB06C0T (même facteur de forme et même empreinte) — différant par CPU Core, GPU, Memory Support, USB, Video Decode.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
BCM2711ZKFSBG04T
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
BCM2711ZPKFSBG06T
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
BCM2711ZPKFSB08T
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
BCM2711ZPKFSB06C0T Valeurs maximales et caractéristiques électriques
| CPU Core | ARM Cortex-A72 (64-bit) |
| Number of Cores | 4 |
| CPU Frequency | 1.5 GHz |
| GPU | Broadcom VideoCore VI |
| Video Decode | H.265 (HEVC) 4Kp60 hardware decode |
| Display Output | Dual HDMI up to 4K, plus DSI |
| USB | USB 3.0 and USB 2.0 controllers |
| Ethernet Support | Gigabit Ethernet via PCIe 2.0 lane |
| Memory Support | LPDDR4 SDRAM (up to 8 GB per Pi 4 technical data sheet) |
| Peripherals | GPIO, SPI, I2C, UART, PCM/I2S, PWM, DMA controller, timers, interrupt controller |
| Interconnect | AMBA AXI-compatible |
| Wireless (end-product) | Dual-band 2.4/5.0 GHz WLAN and Bluetooth 5.0 (via companion radio in Pi 4 design) |
| Instruction Set | AArch64 (ARMv8-A) |
| Type de montage | Surface Mount (BGA) |
Guide de configuration des broches du BCM2711ZPKFSB06C0T standard
Configuration des broches du BCM2711ZPKFSB06C0T (boîtier standard). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour BCM2711ZPKFSB06C0T.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
BCM2711ZPKFSB06C0T convient pour 6 applications: Single-Board Computers, Compute Modules and Embedded Gateways, Digital Signage and Media Players, Industrial HMI and Control Panels, Kiosks and Interactive Terminals, Embedded Vision and Edge AI Prototyping.
Single-Board Computers
The BCM2711ZPKFSB06C0T is the defining SoC of the Raspberry Pi 4 Model B, delivering four 64-bit Cortex-A72 cores at 1.5 GHz, VideoCore VI graphics, dual 4K HDMI, USB 3.0, and Gigabit Ethernet in one device. Its integrated peripheral set - GPIO, SPI, I2C, UART, PCM/I2S and a multi-channel DMA controller - lets a full Linux desktop-class board ship on a credit-card footprint. Designers benefit from documented register-level peripherals (RP-008248-DS), enabling custom OS ports, while the AMBA AXI interconnect sustains the bandwidth LPDDR4 memory and USB 3.0 demand.
Recommandé
Compute Modules and Embedded Gateways
On the Compute Module 4 form factor, the BCM2711 SoC gives industrial integrators access to all processor interfaces - PCIe 2.0, dual MIPI, USB 3.0, and up to 28 GPIO - on a DDR2-SODIMM-class carrier board. With LPDDR4 up to 8 GB and Gigabit Ethernet via PCIe, it handles edge analytics, protocol translation, and on-prem data buffering. The out-of-order AXI caveat documented in the peripherals datasheet matters for custom bootloader work, while standard Linux BSPs abstract it. Its 4Kp60 HEVC engine also enables local video preview in smart-camera gateways.
Recommandé
Digital Signage and Media Players
The BCM2711's VideoCore VI GPU and hardware H.265 decoder sustain 4Kp60 HEVC playback while the CPU cores remain available for content management and networking - a decisive advantage over software-decode ARM parts. Dual HDMI interfaces drive two independent 4K displays from one chip, enabling video-wall tiles and menu-board pairs without external graphics silicon. According to the Pi 4 data sheet, the same SoC also handles audio over HDMI and I2S/PCM, so a single BCM2711 design covers video, audio, and network delivery in a fanless signage player when paired with adequate heatsinking.
Recommandé
Industrial HMI and Control Panels
Touch-panel HMIs exploit the BCM2711's DSI display interface, quad Cortex-A72 CPU for Qt-class GUI stacks, and rich industrial I/O - GPIO with flexible alternate functions, SPI, I2C, UART, and PWM for direct sensor and actuator attachment. Gigabit Ethernet via the PCIe 2.0 lane connects to factory networks while USB 3.0 supports cameras and data loggers. LPDDR4 memory (to 8 GB per the Pi 4 technical data sheet) headroom keeps real-time trends and browser-based dashboards responsive, and the documented register map (RP-008248-DS) allows deterministic GPIO handling from custom firmware where needed.
Recommandé
Kiosks and Interactive Terminals
Retail and self-service kiosks built on the BCM2711 combine dual 4K HDMI output (screen plus second customer-facing display), USB 3.0 for payment peripherals and scanners, and Gigabit Ethernet for transaction backhaul in a low-cost, single-SoC design. The Cortex-A72 quad core at 1.5 GHz runs full browser stacks and local applications with margin, while hardware HEVC decode handles promotional video without CPU load. Thermal design is the key constraint: sustained UI animation load requires a heatsink or conductive enclosure coupling, per Raspberry Pi 4 board-level measurements.
Recommandé
Embedded Vision and Edge AI Prototyping
The BCM2711 accelerates vision prototyping: USB 3.0 and dual MIPI camera paths feed the quad Cortex-A72 cores for OpenCV pipelines, while the VideoCore VI GPU assists compositing and preview rendering. Its PCIe 2.0 lane - normally used for Gigabit Ethernet on Pi 4 boards - can instead host AI accelerator add-ons such as USB/PCIe NPUs in custom carrier designs. With LPDDR4 bandwidth substantially above BCM2837-class parts, frame buffers and model tensors move without starving the CPU. Register-level GPIO/DMA documentation (RP-008248-DS) supports deterministic sensor triggering for synchronized capture rigs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour BCM2711ZPKFSB06C0T — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | BCM2711ZKFSBG04T | BCM2711ZPKFSBG06T | BCM2711ZPKFSB08T |
|---|---|---|---|---|
| Package | FBGA (proprietary BCM2711 package) | FBGA (proprietary BCM2711 package) - same | FBGA (proprietary BCM2711 package) - same | FBGA (proprietary BCM2711 package) - same |
| Brand | Broadcom | Broadcom | Broadcom | Broadcom |
| CPU Architecture | 4x Cortex-A72, 64-bit, 1.5 GHz | 4x Cortex-A72, 64-bit, 1.5 GHz | 4x Cortex-A72, 64-bit, 1.5 GHz | 4x Cortex-A72, 64-bit, 1.5 GHz |
| GPU | VideoCore VI | VideoCore VI | VideoCore VI | VideoCore VI |
| Video Decode | H.265 4Kp60 hardware | H.265 4Kp60 hardware | H.265 4Kp60 hardware | H.265 4Kp60 hardware |
| Memory Class (ordering suffix) | 06C0-class (4 GB-class per Pi 4 family) | 04-class (4 GB-class) | 06-class (4 GB-class) | 08-class (8 GB-class) |
| USB 3.0 | Yes | Yes | Yes | Yes |
| Drop-in Compatibility with Target | N/A (reference) | Yes - same die/package, verify suffix meaning | Yes - same die/package | Yes - same die/package, verify memory PoP |
Principaux différenciateurs
- 64-bit out-of-order Cortex-A72 performance (vs BCM2837B0IFSBG)
- True Gigabit Ethernet via dedicated PCIe 2.0 lane (vs BCM2837B0IFSBG)
- 4Kp60 HEVC hardware decode and dual 4K HDMI (vs BCM2711ZPKFSB08T)
Notes de conception
The BCM2711 AXI interconnect does not always return read data in-order. According to the BCM2711 ARM Peripherals datasheet (RP-008248-DS), the GPU contains special logic to tolerate out-of-order data, but the ARM core does not - so bare-metal boot code and DMA drivers must enforce ordering explicitly on the ARM path. This is the single most common source of subtle crashes in custom OS ports.
Estimated: Raspberry Pi 4 board-level stress tests indicate the SoC path dissipates roughly 6-7 W at full quad-core load. With a typical bare-BGA board-level theta-JA of 30-40 C/W and no spreading copper, junction rise reaches 180-280 C above ambient - unusable. Provide a bonded heatsink, metal enclosure coupling, or forced airflow and verify with thermography. Input values are Pi 4 documentation board power and assumed theta-JA; confirm against your own layout.
The BCM2711 requires a sequenced multi-rail power tree (core, memory, I/O) and boots via an SPI EEPROM that chains to SD/eMMC/USB/network boot. Do not omit bulk capacitance at the LPDDR4 supply; USB 3.0 VBus and the PCIe-based Ethernet path add transient loads. Follow the Raspberry Pi 4 reference power design and the official technical data sheet for rail sequencing before release to production.
This is a fine-pitch BGA requiring controlled-impedance breakout: length-match LPDDR4 byte lanes within datasheet tolerances, and route USB 3.0 and PCIe 2.0 as 90-ohm differential pairs with referenced ground. Verify the exact package drawing (ball count, ball pitch, dimensions) directly with Raspberry Pi/Broadcom, since the verified data did not include the package mechanical drawing.
Informations de conformité
Compliance data was not present in the verified web data for this MPN; request manufacturer compliance documentation with your quote.
