BCM53128VKQLEG 5-Port Gigabit Ethernet Switch | Broadcom
Référence : BCM53128VKQLEG ✓ ActifBCM53128VKQLEG Présentation
A multiport Gigabit Ethernet switch is a network-interface semiconductor that connects multiple wired-network ports and forwards Ethernet frames at line rates. Unlike a software-managed switch, an unmanaged switch performs its forwarding functions with minimal host intervention. The BCM53128 belongs to the Ethernet interface IC hierarchy, combining a switching controller with integrated support functions for copper ports, cable diagnostics, loop detection, and configuration storage.
The switch provides five Gigabit Ethernet ports and uses discrete magnetics, reducing magnetic-component count compared with highly integrated solutions while supporting cost-focused PCB layouts. EEPROM supports configuration of features such as jumbo frames and LoopDTech, while CableChecker adds cable-fault analysis. LoopDTech can detect loop conditions and activate a buzzer warning function in equipment that implements the associated circuit.
The VKQLEG ordering code identifies the commercial-temperature, tray-packaged form used in this product family. Its 256-terminal square HLFQFP package is a fine-pitch surface-mount package intended for multilayer PCBs and automated assembly. The 256-terminal footprint requires careful escape-routing, exposed-pad review, thermal analysis, and assembly-process control rather than the simpler layout used for a small leaded network controller.
Typical uses include unmanaged home gateways, Ethernet switches, set-top-box networking, industrial Ethernet endpoints, surveillance-network equipment, and carrier access hardware. Its unmanaged architecture is most appropriate when the equipment needs reliable multiport connectivity but does not require per-port VLAN management, sophisticated traffic prioritization, or host-controlled configuration.
For a new layout, follow the manufacturer’s recommended decoupling, magnetic-component, clock, and high-speed differential-routing guidance in the BCM53128 datasheet. Keep the 5-port magnetics layout electrically compact, provide the required EEPROM interface, and verify layer transitions for each 1000BASE-T copper channel. PCB signal-integrity validation should include return-path continuity and component placement around the switching device.
This product summary combines the BCM53128 functional feature set with practical package, sourcing, and design guidance. It also distinguishes directly comparable Broadcom ordering variants and identifies which electrical and mechanical characteristics must be confirmed before considering a replacement.
Alternatives de remplacement direct pour BCM53128VKQLEG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec BCM53128VKQLEG (même facteur de forme et même empreinte) — différant par Cable Diagnostics, Ethernet Standard, Jumbo Frame Support, Package, Product Type.
BCM53128KQLEG
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →BCM53128IQLEG
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BCM53128VKQLEG Valeurs maximales et caractéristiques électriques
| Product Type | Multiport Gigabit Ethernet switch IC |
| Number of Ethernet Ports | 5 ports |
| Ethernet Speed | 1000BASE-T Gigabit Ethernet |
| Switching Architecture | Unmanaged |
| Magnetics Support | Discrete magnetics |
| Configuration Storage | EEPROM |
| Jumbo Frame Support | Yes |
| Loop Detection | LoopDTech |
| Cable Diagnostics | CableChecker |
| Boîtier | 256-terminal HLFQFP |
| Terminal Count | 256 terminals |
| Package Shape | Square |
| Type de montage | Surface mount |
| Temperature Grade | Commercial |
| Moisture Sensitivity Level | MSL 3 (168 hours) |
| Packaging | Tray |
Guide de configuration des broches du BCM53128VKQLEG square
Configuration des broches du BCM53128VKQLEG (boîtier square). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour BCM53128VKQLEG.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
BCM53128VKQLEG convient pour 6 applications: Unmanaged Home Gateway, Industrial Ethernet Switch, IP Camera Network Hub, Set-Top Box Ethernet Connectivity, Network-Attached Storage Link Hub, Cabled IoT Gateway.
Unmanaged Home Gateway
The BCM53128VKQLEG fits an unmanaged home gateway that must present five 1000BASE-T connections without requiring host-managed switch features. Its unmanaged architecture simplifies the network-control path, while EEPROM provides a dedicated route for configuration such as jumbo-frame and LoopDTech options. The device works with discrete magnetics, allowing the PCB team to optimize transformer selection and placement around each copper port. Five ports provide useful aggregation for broadband termination, IP-camera connections, and local storage in a single enclosure. Designers should preserve the recommended high-speed layer transitions, maintain continuous return paths beneath differential pairs, and verify synchronization between the switch and external magnetic components.
Recommandé
Industrial Ethernet Switch
The BCM53128VKQLEG is suitable for an unmanaged industrial Ethernet switch when five Gigabit ports and diagnostic functions satisfy the equipment specification. LoopDTech can identify undesirable network loops, while CableChecker supports cable-fault analysis; the host controller can use these indications to simplify maintenance. Discrete magnetics keep the copper interface design flexible for industrial cable impedance and isolation requirements. Because the published ordering option is commercial grade, the enclosure temperature and thermal conditions must be checked carefully. Maintain short differential-pair paths, provide uninterrupted reference planes, and use the manufacturer’s magnetic-circuit layout to minimize insertion loss and crosstalk.
Recommandé
IP Camera Network Hub
The BCM53128VKQLEG can form the Ethernet switching core of a compact IP-camera hub with five 1000BASE-T ports. The unmanaged forwarding architecture is appropriate for a dedicated surveillance appliance that does not need per-port administrative control, and jumbo-frame configuration can support efficient transfer of large video and image data when every endpoint supports the selected frame size. CableChecker assists troubleshooting of installed cable runs, while LoopDTech helps expose accidental loop conditions. The design should allocate one discrete magnetic network for each copper port and follow the datasheet’s recommended spacing and layer-transition rules. Firmware should also verify camera frame-size compatibility before enabling jumbo frames system-wide.
Recommandé
Set-Top Box Ethernet Connectivity
The BCM53128VKQLEG is appropriate for adding multiple Gigabit Ethernet connections to a set-top box or similar customer-premises gateway. Its unmanaged operation reduces control overhead for equipment that simply needs transparent frame forwarding, and five ports can connect a local network segment without adding a separate external switch. EEPROM configuration allows the equipment manufacturer to predefine features such as jumbo-frame behavior and loop detection. Discrete magnetics support product-specific transformer and port-layout choices. A robust implementation must use the manufacturer’s reference layout for the switch, magnetics, and decoupling, while preserving controlled impedance and adequate return-path continuity for all five copper channels.
Recommandé
Network-Attached Storage Link Hub
The BCM53128VKQLEG can support a compact network-attached storage link hub that combines several 1000BASE-T endpoints around one embedded platform. Transparent unmanaged forwarding suits storage appliances whose main controller requires connectivity rather than sophisticated switch administration. Jumbo-frame support may improve efficiency for large transfers, but storage clients, host controllers, and any intermediate equipment must agree on the enabled size. EEPROM provides deterministic factory configuration across production units. The PCB should place the magnetics close to their corresponding switch ports and minimize stubs, and engineering tests should verify differential impedance, insertion loss, and return loss with the final transformer and enclosure configuration.
Recommandé
Cabled IoT Gateway
The BCM53128VKQLEG fits a cabled IoT gateway designed to aggregate wired sensors, controllers, and service nodes over five Gigabit Ethernet connections. The unmanaged switching path reduces software overhead, while CableChecker and LoopDTech provide useful diagnostic inputs for a gateway controller. The discrete-magnetics approach allows the gateway to support multiple copper-port layouts without tying the design to a single integrated magnetic package. In a compact enclosure, thermal and crosstalk performance require careful planning around the 256-terminal HLFQFP and five external magnetic networks. Follow the datasheet’s PCB recommendations, preserve continuous reference planes, and validate port performance across temperature and cable-length conditions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour BCM53128VKQLEG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | BCM53128KQLEG | BCM53128IQLEG |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | 256-terminal HLFQFP | 256-terminal HLFQFP | 256-terminal HLFQFP |
| Product Type | Multiport Gigabit Ethernet switch IC | Multiport Gigabit Ethernet switch IC | Multiport Gigabit Ethernet switch IC |
| Port Count | 5 ports | 5 ports | 5 ports |
| Ethernet Speed | 1000BASE-T Gigabit Ethernet | 1000BASE-T Gigabit Ethernet | 1000BASE-T Gigabit Ethernet |
| Switching Architecture | Unmanaged | Unmanaged | Unmanaged |
| Magnetics Support | Discrete magnetics | Discrete magnetics | Discrete magnetics |
| Configuration Interface | EEPROM | EEPROM | EEPROM |
| Jumbo Frame Support | Yes | Yes | Yes |
| Diagnostic Features | LoopDTech and CableChecker | LoopDTech and CableChecker | LoopDTech and CableChecker |
Principaux différenciateurs
- Five-port integration in one switching IC (vs BCM53128KQLEG)
- Integrated cable and loop diagnostics (vs BCM53128IQLEG)
- EEPROM-based production configuration (vs BCM53128KQLEG)
- Discrete magnetics provide layout flexibility (vs BCM53128IQLEG)
Notes de conception
Use the Broadcom BCM53128 datasheet layout as the foundation for the 256-terminal HLFQFP footprint and copper-channel escape routing. Place each discrete magnetic component close to its associated port and avoid introducing stubs or layer transitions within high-speed differential pairs. Maintain continuous reference planes beneath the pairs and verify the final stack-up with field solvers. The fine-pitch package also requires inspection for solder bridging, opens, and insufficient pad-to-pad clearance.
Validate each 1000BASE-T channel with the production PCB stack-up, selected discrete transformer, magnetics footprint, and enclosure environment. Confirm differential impedance, insertion loss, return loss, and crosstalk across the required frequency range. Keep the switch, magnetic circuits, and decoupling layout unchanged between engineering and production samples, because small placement or layer changes can materially affect link performance.
Follow the datasheet’s recommended supply network and decoupling layout to prevent supply disturbance from propagating into the switching and magnetics circuits. Estimate device dissipation from the applicable supply voltage and operating current, then include the thermal contribution from nearby magnetics and regulators. Use the package thermal information and board copper area to determine whether additional thermal spreading or airflow is necessary in the final enclosure.
Do not enable jumbo frames unless all endpoints and intermediate devices support the configured frame size. Confirm the complete Broadcom ordering code when substituting BCM53128KQLEG or BCM53128IQLEG, and compare the package drawing, temperature grade, pin table, and option-dependent behavior. Also observe MSL 3 handling requirements for the tray-packed component, including appropriate storage and baking procedures after exposure to humidity.
Informations de conformité
The available product information identifies the device as commercial grade and MSL 3, but it does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.