Broadcom

BCM53128VKQLEG 5-Port Gigabit Ethernet Switch | Broadcom

Артикул: BCM53128VKQLEG ✓ Активен
256-terminal HLFQFP Package 1000BASE-T Gigabit Ethernet Speed
MOQ: 1 |

BCM53128VKQLEG Обзор

Broadcom BCM53128VKQLEG is a 5-port Gigabit Ethernet switch IC with discrete magnetics support, unmanaged switching, EEPROM configuration, jumbo-frame capability, LoopDTech, and CableChecker diagnostics. It is packaged in a 256-terminal HLFQFP surface-mount package and is intended for compact multiport Ethernet equipment.

A multiport Gigabit Ethernet switch is a network-interface semiconductor that connects multiple wired-network ports and forwards Ethernet frames at line rates. Unlike a software-managed switch, an unmanaged switch performs its forwarding functions with minimal host intervention. The BCM53128 belongs to the Ethernet interface IC hierarchy, combining a switching controller with integrated support functions for copper ports, cable diagnostics, loop detection, and configuration storage.

The switch provides five Gigabit Ethernet ports and uses discrete magnetics, reducing magnetic-component count compared with highly integrated solutions while supporting cost-focused PCB layouts. EEPROM supports configuration of features such as jumbo frames and LoopDTech, while CableChecker adds cable-fault analysis. LoopDTech can detect loop conditions and activate a buzzer warning function in equipment that implements the associated circuit.

The VKQLEG ordering code identifies the commercial-temperature, tray-packaged form used in this product family. Its 256-terminal square HLFQFP package is a fine-pitch surface-mount package intended for multilayer PCBs and automated assembly. The 256-terminal footprint requires careful escape-routing, exposed-pad review, thermal analysis, and assembly-process control rather than the simpler layout used for a small leaded network controller.

Typical uses include unmanaged home gateways, Ethernet switches, set-top-box networking, industrial Ethernet endpoints, surveillance-network equipment, and carrier access hardware. Its unmanaged architecture is most appropriate when the equipment needs reliable multiport connectivity but does not require per-port VLAN management, sophisticated traffic prioritization, or host-controlled configuration.

For a new layout, follow the manufacturer’s recommended decoupling, magnetic-component, clock, and high-speed differential-routing guidance in the BCM53128 datasheet. Keep the 5-port magnetics layout electrically compact, provide the required EEPROM interface, and verify layer transitions for each 1000BASE-T copper channel. PCB signal-integrity validation should include return-path continuity and component placement around the switching device.

This product summary combines the BCM53128 functional feature set with practical package, sourcing, and design guidance. It also distinguishes directly comparable Broadcom ordering variants and identifies which electrical and mechanical characteristics must be confirmed before considering a replacement.

Аналоги без доработки для BCM53128VKQLEG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с BCM53128VKQLEG (тот же форм-фактор и посадочное место) — отличается по Cable Diagnostics, Ethernet Standard, Jumbo Frame Support, Package, Product Type.

Broadcom
Ethernet Standard: Gigabit Ethernet
Package: PQFP-256
Сравнить с BCM53128VKQLEG →
Broadcom
Cable Diagnostics: CableChecker warning function
Ethernet Standard: Gigabit Ethernet (GbE)
Jumbo Frame Support: EEPROM-configurable option
Сравнить с BCM53128VKQLEG →

BCM53128KQLEG

✅ Прямая замена
Broadcom
📦 256-terminal HLFQFP
Unmanaged Gigabit Ethernet switch · Gigabit Ethernet · Unmanaged · CableChecker · LoopDTech on/off switching with buzzer warning sound · Discrete magnetics · EEPROM · EEPROM-enabled

Уточнить цену

Открыть даташит →

BCM53128IQLEG

✅ Прямая замена
📦 256-terminal HLFQFP
Primary switching parameters are reported identical; only the Broadcom ordering-code options differ, with the specific delta not stated

📋 Справочный аналог (нет в каталоге)

BCM53128VKQLEG Максимальные параметры и электрические характеристики

Product Type Multiport Gigabit Ethernet switch IC
Number of Ethernet Ports 5 ports
Ethernet Speed 1000BASE-T Gigabit Ethernet
Switching Architecture Unmanaged
Magnetics Support Discrete magnetics
Configuration Storage EEPROM
Jumbo Frame Support Yes
Loop Detection LoopDTech
Cable Diagnostics CableChecker
Корпус 256-terminal HLFQFP
Terminal Count 256 terminals
Package Shape Square
Тип монтажа Surface mount
Temperature Grade Commercial
Moisture Sensitivity Level MSL 3 (168 hours)
Packaging Tray

Руководство по цоколевке BCM53128VKQLEG в корпусе square

Цоколевка для BCM53128VKQLEG (корпус square). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса square для BCM53128VKQLEG

Нет подробных данных о распиновке для BCM53128VKQLEG.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

BCM53128VKQLEG подходит для 6 применениеs: Unmanaged Home Gateway, Industrial Ethernet Switch, IP Camera Network Hub, Set-Top Box Ethernet Connectivity, Network-Attached Storage Link Hub, Cabled IoT Gateway.

🌐

Unmanaged Home Gateway

The BCM53128VKQLEG fits an unmanaged home gateway that must present five 1000BASE-T connections without requiring host-managed switch features. Its unmanaged architecture simplifies the network-control path, while EEPROM provides a dedicated route for configuration such as jumbo-frame and LoopDTech options. The device works with discrete magnetics, allowing the PCB team to optimize transformer selection and placement around each copper port. Five ports provide useful aggregation for broadband termination, IP-camera connections, and local storage in a single enclosure. Designers should preserve the recommended high-speed layer transitions, maintain continuous return paths beneath differential pairs, and verify synchronization between the switch and external magnetic components.

🏭

Industrial Ethernet Switch

The BCM53128VKQLEG is suitable for an unmanaged industrial Ethernet switch when five Gigabit ports and diagnostic functions satisfy the equipment specification. LoopDTech can identify undesirable network loops, while CableChecker supports cable-fault analysis; the host controller can use these indications to simplify maintenance. Discrete magnetics keep the copper interface design flexible for industrial cable impedance and isolation requirements. Because the published ordering option is commercial grade, the enclosure temperature and thermal conditions must be checked carefully. Maintain short differential-pair paths, provide uninterrupted reference planes, and use the manufacturer’s magnetic-circuit layout to minimize insertion loss and crosstalk.

🎥

IP Camera Network Hub

The BCM53128VKQLEG can form the Ethernet switching core of a compact IP-camera hub with five 1000BASE-T ports. The unmanaged forwarding architecture is appropriate for a dedicated surveillance appliance that does not need per-port administrative control, and jumbo-frame configuration can support efficient transfer of large video and image data when every endpoint supports the selected frame size. CableChecker assists troubleshooting of installed cable runs, while LoopDTech helps expose accidental loop conditions. The design should allocate one discrete magnetic network for each copper port and follow the datasheet’s recommended spacing and layer-transition rules. Firmware should also verify camera frame-size compatibility before enabling jumbo frames system-wide.

📺

Set-Top Box Ethernet Connectivity

The BCM53128VKQLEG is appropriate for adding multiple Gigabit Ethernet connections to a set-top box or similar customer-premises gateway. Its unmanaged operation reduces control overhead for equipment that simply needs transparent frame forwarding, and five ports can connect a local network segment without adding a separate external switch. EEPROM configuration allows the equipment manufacturer to predefine features such as jumbo-frame behavior and loop detection. Discrete magnetics support product-specific transformer and port-layout choices. A robust implementation must use the manufacturer’s reference layout for the switch, magnetics, and decoupling, while preserving controlled impedance and adequate return-path continuity for all five copper channels.

🖥️

Network-Attached Storage Link Hub

The BCM53128VKQLEG can support a compact network-attached storage link hub that combines several 1000BASE-T endpoints around one embedded platform. Transparent unmanaged forwarding suits storage appliances whose main controller requires connectivity rather than sophisticated switch administration. Jumbo-frame support may improve efficiency for large transfers, but storage clients, host controllers, and any intermediate equipment must agree on the enabled size. EEPROM provides deterministic factory configuration across production units. The PCB should place the magnetics close to their corresponding switch ports and minimize stubs, and engineering tests should verify differential impedance, insertion loss, and return loss with the final transformer and enclosure configuration.

🧩

Cabled IoT Gateway

The BCM53128VKQLEG fits a cabled IoT gateway designed to aggregate wired sensors, controllers, and service nodes over five Gigabit Ethernet connections. The unmanaged switching path reduces software overhead, while CableChecker and LoopDTech provide useful diagnostic inputs for a gateway controller. The discrete-magnetics approach allows the gateway to support multiple copper-port layouts without tying the design to a single integrated magnetic package. In a compact enclosure, thermal and crosstalk performance require careful planning around the 256-terminal HLFQFP and five external magnetic networks. Follow the datasheet’s PCB recommendations, preserve continuous reference planes, and validate port performance across temperature and cable-length conditions.

Сводка рекомендуемых товаров

BCM53128KQLEG Broadcom Используется в: Unmanaged Home Gateway, Industrial Ethernet Switch, IP Camera Network Hub, Set-Top Box Ethernet Connectivity, Network-Attached Storage Link Hub, Cabled IoT Gateway BCM53128IQLEG Same-family Broadcom switch comparison Используется в: Unmanaged Home Gateway, Industrial Ethernet Switch, IP Camera Network Hub, Set-Top Box Ethernet Connectivity, Network-Attached Storage Link Hub, Cabled IoT Gateway
What is the BCM53128VKQLEG?
The BCM53128VKQLEG is a Broadcom 5-port unmanaged Gigabit Ethernet switch IC with discrete magnetics support, EEPROM configuration, jumbo-frame capability, LoopDTech, and CableChecker. It is supplied in a commercial-temperature, 256-terminal HLFQFP package. According to the Broadcom BCM53128 datasheet, the device is intended for compact, unmanaged Gigabit Ethernet switch designs using external magnetics.
How many Gigabit Ethernet ports does BCM53128VKQLEG support?
The BCM53128VKQLEG supports five Gigabit Ethernet ports. These ports operate at 1000BASE-T line rate and use discrete magnetics rather than integrated magnetic modules. According to the Broadcom BCM53128 datasheet, the discrete-magnetics approach is intended to support low-cost Ethernet equipment while allowing the PCB designer to select appropriate network transformers and optimize their placement.
Where can I download the BCM53128VKQLEG datasheet PDF?
The BCM53128VKQLEG datasheet PDF is available through the Broadcom BCM53128 document hosted by Mouser. It is the primary technical reference for electrical characteristics, package information, configuration EEPROM behavior, magnetic-circuit requirements, and recommended application circuits. Use the manufacturer datasheet and its pin-description information when assigning the 256 HLFQFP terminals and planning the multilayer PCB.
Where can I find the BCM53128VKQLEG pinout?
The BCM53128VKQLEG pinout is documented in the BCM53128 manufacturer datasheet, which contains the 256-terminal HLFQFP package drawing and pin-description table. The package uses a square 256-terminal gull-wing layout. Because its fine-pitch pin map is too large to reproduce reliably without the original drawing, use the datasheet pin table directly for PCB routing and symbol creation.
What are LoopDTech and CableChecker in BCM53128VKQLEG?
LoopDTech detects network loop conditions, while CableChecker provides cable-fault analysis. The Broadcom datasheet describes EEPROM configuration for LoopDTech and a buzzer warning function associated with the loop-detection feature. These diagnostics can help managed by the host equipment identify a downstream cabling or topology problem, although they do not turn the unmanaged switch into a fully configurable network switch.
Does BCM53128VKQLEG support jumbo frames?
Yes, the BCM53128VKQLEG supports jumbo frames, with the operating configuration enabled through EEPROM according to the Broadcom datasheet. Jumbo-frame support is useful when transferring large files or reducing protocol overhead, but every endpoint and the intervening network equipment must use compatible frame sizes. The EEPROM configuration must also be checked against the intended system requirements before deployment.
What is the difference between BCM53128VKQLEG and BCM53128KQLEG?
The BCM53128VKQLEG and BCM53128KQLEG are reported as having identical primary performance profiles, making the KQLEG ordering option the closest listed functional comparison. Both are Broadcom BCM53128-family unmanaged Gigabit Ethernet switch variants. Before treating the KQLEG as a drop-in replacement, confirm the order code, package dimensions, temperature grade, pin functions, and configuration details against the manufacturer datasheet.
Can BCM53128IQLEG replace BCM53128VKQLEG?
The BCM53128IQLEG is reported as having no measurable difference from the BCM53128VKQLEG across the compared primary parameters, so it is a candidate drop-in option within the same Broadcom family. Final substitution still requires comparison of the complete ordering codes, 256-terminal package drawing, temperature grade, pin definitions, and any option-dependent configuration. The I and V order-code characters must not be assumed to be interchangeable.
What can replace the BCM53128VKQLEG on the same PCB?
The closest documented replacements are BCM53128KQLEG and BCM53128IQLEG, both Broadcom 53128-family devices reported to have matching primary performance profiles. These are the only drop-in candidates supported by the available cross-reference information, so a broader replacement list cannot be asserted safely. Validate the footprint, pin functions, temperature grade, and device options against the Broadcom datasheet before production substitution.
Is BCM53128VKQLEG suitable for an unmanaged industrial Ethernet switch?
The BCM53128VKQLEG can suit an unmanaged industrial Ethernet switch when five 1000BASE-T ports, discrete magnetics, and basic cable diagnostics meet the design requirements. Its commercial temperature grade must be checked against the enclosure’s actual ambient range. For applications requiring extended temperature operation, industrial qualification, managed VLANs, advanced traffic control, or redundant power behavior, select a device explicitly specified for those requirements.
When should I choose BCM53128VKQLEG instead of BCM53128KQLEG?
Choose BCM53128VKQLEG when the released ordering code, qualification level, and configuration match the production design. The available comparison indicates that BCM53128KQLEG has the same primary performance profile, so there is no demonstrated electrical-performance advantage for either ordering option. The deciding factor should be documented order-code and lifecycle suitability rather than assumed differences in switching performance.
How much power does BCM53128VKQLEG dissipate?
The BCM53128VKQLEG power dissipation cannot be stated numerically without the operating voltage, load configuration, and thermal conditions identified in the datasheet. Estimate it from the device supply current multiplied by the relevant supply voltage, then add the loss associated with external magnetics where applicable. Compare the resulting total thermal load with the package and board thermal design before release.
Is BCM53128VKQLEG in stock and what is its lead time?
Current inventory and lead time should be confirmed through the Request a Quote form on this page rather than inferred from a static listing. The part is offered in tray packaging with MSL 3 handling requirements. Quote requests can confirm exact MPN availability, quantity breaks, current lead time, and any assembly or sourcing constraints before components are released to production.
Where can I buy BCM53128VKQLEG online?
Use the Request a Quote form on this page to request BCM53128VKQLEG from XAIPART with the required quantity and delivery information. The exact part number is BCM53128VKQLEG, supplied in a tray, and the order code should be transcribed without changing the package, temperature, or reel-code characters. The quote process can also confirm current stock, lead time, and traceability requirements.
What are the key specifications of BCM53128VKQLEG that engineers should know?
The BCM53128VKQLEG is a 5-port unmanaged Gigabit Ethernet switch with discrete magnetics, EEPROM configuration, jumbo-frame support, LoopDTech, and CableChecker diagnostics. It uses a 256-terminal square HLFQFP surface-mount package, is designated for commercial temperature use, and is supplied in a tray with MSL 3 (168-hour) handling. The Broadcom datasheet is the controlling reference for electrical limits and pin functions.
Is BCM53128VKQLEG the same as BCM53128KQLEG?
The BCM53128VKQLEG and BCM53128KQLEG have the same reported primary performance profile, but they remain distinct order codes. A direct substitution is technically plausible based on the available comparison, yet the package drawing, temperature designation, pin table, and option-dependent behavior must be checked before use. Treat them as related drop-in candidates rather than automatically interchangeable commercial references.

Справочные инженерные данные для BCM53128VKQLEG — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the BCM53128VKQLEG when an equipment design needs five unmanaged 1000BASE-T ports, EEPROM-configurable behavior, and basic cable or loop diagnostics in a compact 256-terminal HLFQFP package. Its unmanaged architecture is especially useful in gateways, appliances, and industrial systems where transparent frame forwarding is sufficient. BCM53128KQLEG and BCM53128IQLEG are the closest supported drop-in candidates and are reported to have identical primary performance profiles, so order-code qualification and lifecycle suitability should determine the choice. Do not select either comparison option solely on an assumed feature difference. Choose a different switch family when managed VLANs, advanced QoS, wider temperature operation, smaller packages, or integrated magnetics are mandatory. Before production release, verify the exact ordering code, pin map, EEPROM setup, magnetic circuits, signal integrity, and thermal performance against the Broadcom datasheet.

Сравнение с аналогами

Параметр Этот товар BCM53128KQLEG BCM53128IQLEG
Brand Broadcom Broadcom Broadcom
Package 256-terminal HLFQFP 256-terminal HLFQFP 256-terminal HLFQFP
Product Type Multiport Gigabit Ethernet switch IC Multiport Gigabit Ethernet switch IC Multiport Gigabit Ethernet switch IC
Port Count 5 ports 5 ports 5 ports
Ethernet Speed 1000BASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet
Switching Architecture Unmanaged Unmanaged Unmanaged
Magnetics Support Discrete magnetics Discrete magnetics Discrete magnetics
Configuration Interface EEPROM EEPROM EEPROM
Jumbo Frame Support Yes Yes Yes
Diagnostic Features LoopDTech and CableChecker LoopDTech and CableChecker LoopDTech and CableChecker

Ключевые отличия

  • Five-port integration in one switching IC (против BCM53128KQLEG)
  • Integrated cable and loop diagnostics (против BCM53128IQLEG)
  • EEPROM-based production configuration (против BCM53128KQLEG)
  • Discrete magnetics provide layout flexibility (против BCM53128IQLEG)

Заметки по проектированию

Use the Broadcom BCM53128 datasheet layout as the foundation for the 256-terminal HLFQFP footprint and copper-channel escape routing. Place each discrete magnetic component close to its associated port and avoid introducing stubs or layer transitions within high-speed differential pairs. Maintain continuous reference planes beneath the pairs and verify the final stack-up with field solvers. The fine-pitch package also requires inspection for solder bridging, opens, and insufficient pad-to-pad clearance.

Validate each 1000BASE-T channel with the production PCB stack-up, selected discrete transformer, magnetics footprint, and enclosure environment. Confirm differential impedance, insertion loss, return loss, and crosstalk across the required frequency range. Keep the switch, magnetic circuits, and decoupling layout unchanged between engineering and production samples, because small placement or layer changes can materially affect link performance.

Follow the datasheet’s recommended supply network and decoupling layout to prevent supply disturbance from propagating into the switching and magnetics circuits. Estimate device dissipation from the applicable supply voltage and operating current, then include the thermal contribution from nearby magnetics and regulators. Use the package thermal information and board copper area to determine whether additional thermal spreading or airflow is necessary in the final enclosure.

Do not enable jumbo frames unless all endpoints and intermediate devices support the configured frame size. Confirm the complete Broadcom ordering code when substituting BCM53128KQLEG or BCM53128IQLEG, and compare the package drawing, temperature grade, pin table, and option-dependent behavior. Also observe MSL 3 handling requirements for the tray-packed component, including appropriate storage and baking procedures after exposure to humidity.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The available product information identifies the device as commercial grade and MSL 3, but it does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

BCM53128VKQLEG datasheet BCM53128VKQLEG specifications BCM53128VKQLEG pinout BCM53128VKQLEG datasheet pdf Broadcom BCM53128VKQLEG BCM53128VKQLEG equivalent BCM53128VKQLEG replacement BCM53128VKQLEG cross reference BCM53128VKQLEG vs BCM53128KQLEG BCM53128VKQLEG footprint BCM53128VKQLEG application circuit BCM53128VKQLEG price BCM53128VKQLEG stock BCM53128 5 port switch BCM53128 LoopDTech CableChecker

Связанные компоненты & термины

Broadcom BCM53128VKQLEG BCM53128KQLEG BCM53128IQLEG BCM53128 Multiport Gigabit Ethernet switch Ethernet switch IC Network interface IC Unmanaged switch 1000BASE-T Gigabit Ethernet Discrete magnetics EEPROM Jumbo frame LoopDTech CableChecker 256-terminal HLFQFP HLFQFP package family Surface-mount package SMD PCB layout Signal integrity Industrial Ethernet Home gateway IP camera hub
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ