Broadcom

BCM54640B0KFB Ethernet Interface IC | Broadcom

Référence : BCM54640B0KFB ✗ Fin de vie
MOQ : 1 |

BCM54640B0KFB Présentation

Broadcom BCM54640B0KFB is an Ethernet interface integrated circuit associated with SGMII connectivity, multi-port networking equipment, and copper Ethernet designs. The exact electrical ratings, transceiver configuration, pin assignments, package dimensions, and operating limits are not stated in the product records used for this listing, so engineers should treat those values as application-specific items to confirm in the manufacturer datasheet before releasing a PCB or qualifying production hardware.

An Ethernet interface IC is a semiconductor that integrates the physical-layer transceiver and digital interface functions needed to connect processor, switch, or communications equipment to Ethernet networks. Depending on its exact configuration, this device can support combinations of copper and fiber-facing ports, serial GMII/SGMII links, media-independent interfaces, clocks, and control signals. The BCM54640 family therefore sits within the hierarchy Ethernet interface IC, Ethernet transceiver, network interface controller, interface IC, and integrated circuit.

The main engineering benefit of integrating these functions is reduced component count and a compact connection between a digital Ethernet subsystem and physical media. A system designer can connect the serial interface to a network processor or switch fabric while using the transceiver portion for Ethernet line signaling. This integration can shorten board routing, reduce exposed connector and magnetics complexity, and provide a more standardized interface boundary than a collection of separate PHY and digital-interface components.

The BCM54640B0KFB is identified by Broadcom and is associated with SGMII-based Ethernet connectivity. SGMII is a serial gigabit Ethernet interface commonly used between MAC and PHY devices. Its use allows high-speed data to travel over a compact differential or single-ended implementation depending on the electrical standard, reducing pin count relative to parallel GMII. Engineers must still follow the exact voltage, timing, termination, and layout requirements for the specific Broadcom interface.

Typical uses include access-network equipment, Ethernet switches, routers, network interface cards, industrial Ethernet systems, and communications infrastructure where an integrated multi-port transceiver can simplify board design. The device may also be evaluated in designs requiring a standard SGMII connection between a switching ASIC or packet processor and physical-layer circuitry. Interface voltage levels and pin-level functions must be checked against the host ASIC before layout begins.

A key design consideration is that Ethernet signal integrity depends on controlled impedance, short differential routes, solid return paths, and proper separation from noisy power and digital circuitry. Decoupling, clock cleanliness, magnetics or optical-interface integration, reset behavior, and thermal performance also require verification against the manufacturer documentation. Use the Broadcom BCM54640B0KFB datasheet and its reference design when assigning pins and selecting passive components.

This page combines the available manufacturer and distributor product records, identifies the confirmed same-family BCM54640 naming options, and provides a structured engineering comparison and application guide. It is intended to accelerate initial component screening while directing final footprint, timing, electrical, and lifecycle decisions to the authoritative Broadcom documentation.

Alternatives de remplacement direct pour BCM54640B0KFB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

BCM54640B0KFBG

✅ Remplacement direct
📦 [DATA_NEEDED: package designation]
Same BCM54640 family, but the G suffix may change packing or grade; package and port-configuration equivalence is not numerically stated in the available records.

📋 Alternative de référence (hors catalogue)

BCM54640B0IFBG

✅ Remplacement direct
📦 [DATA_NEEDED: package designation]
Same BCM54640 family, but the I suffix may change configuration or grade; the available comparison record does not quantify an electrical difference.

📋 Alternative de référence (hors catalogue)

BCM54640B0KFB Valeurs maximales et caractéristiques électriques

Product Type Ethernet interface IC
Manufacturer Broadcom
Series BCM54640
Serial Interface SGMII
Type de montage Surface mount

Guide de configuration des broches du BCM54640B0KFB standard

Configuration des broches du BCM54640B0KFB (boîtier standard). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier standard pour le BCM54640B0KFB

Aucune donnée de brochage détaillée disponible pour BCM54640B0KFB.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

BCM54640B0KFB convient pour 6 applications: Ethernet Switch Line Cards, Router Network Interfaces, Access Network Equipment, Industrial Ethernet Gateways, Network Interface Cards, Communications Infrastructure Equipment.

🌐

Ethernet Switch Line Cards

BCM54640B0KFB is a candidate for an Ethernet switch line card where a switching ASIC requires a compact SGMII link to physical-layer circuitry. Integrating the Ethernet interface into the BCM54640 family can reduce the number of discrete interface devices and shorten sensitive signal paths between the MAC and transceiver sections. Before schematic capture, engineers must confirm the supported port count, copper and fiber media, maximum data rate, and electrical levels against the host ASIC. The PCB should follow the manufacturer reference layout for controlled-impedance SGMII routing, clock distribution, decoupling, and return-path continuity. Thermal and power analysis must also use the exact datasheet operating conditions.

🌐

Router Network Interfaces

The BCM54640B0KFB can be evaluated for router and communications equipment that connects a network processor to Ethernet physical media through SGMII. The integrated interface approach may reduce board area and component count compared with separate PHY and controller solutions, while preserving a defined serial boundary between high-speed digital logic and Ethernet circuitry. The key selection criteria are supported line rate, media configuration, clock architecture, reset sequencing, and management-register behavior. Use the exact Broadcom documentation to establish timing margins and power requirements, and validate conducted, radiated, and thermal performance before production.

🏭

Access Network Equipment

BCM54640B0KFB is suitable for initial screening in access-network terminals and aggregation equipment where multiple Ethernet connections and SGMII-based host integration are required. Consolidation of Ethernet interface functions can lower board complexity and simplify firmware control when the selected configuration matches the system's port mix. The design review should verify whether copper, fiber, or both media are required, confirm the supported PHY features, and check startup and reset behavior. Regulatory and deployment targets can make long-term availability important, so lifecycle confirmation and an approved alternate should be obtained before the design reaches production.

🏭

Industrial Ethernet Gateways

BCM54640B0KFB can support an industrial Ethernet gateway when its SGMII host interface and available transceiver ports align with the gateway's wired communications architecture. A serial high-speed link can simplify connections between an embedded processor and Ethernet hardware, while integrated interface functions can reduce the component count on space-constrained control boards. Industrial designs must confirm the device's operating-temperature grade, isolation requirements, surge and ESD strategy, and long-term supply status. The layout should preserve uninterrupted ground planes beneath SGMII routes and isolate switching power stages and connectors from sensitive interface signals.

🖥️

Network Interface Cards

BCM54640B0KFB is applicable to a network interface card when the host controller exposes the required SGMII clocks and data signals and the card needs a consolidated Ethernet interface solution. The device family can simplify routing relative to parallel legacy interfaces and provide a standardized serial connection to the network processor. Designers must verify lane polarity, reference-clock source, I/O voltage, timing, and supported media against the host ASIC. PCB stack-up and component placement should be treated as part of the signal-integrity design, especially when the card also contains connectors, magnetics, clock sources, and nonisolated power converters.

📡

Communications Infrastructure Equipment

BCM54640B0KFB can be assessed for communications infrastructure equipment requiring deterministic Ethernet connectivity between a packet-processing ASIC and physical media. The BCM54640 family's SGMII association makes it relevant to compact, high-speed line-card implementations, provided the exact port and grade configuration is supported. Validation should include interface timing over all voltage and temperature corners, reference-clock jitter tolerance, reset behavior, electromagnetic performance, and fault recovery. For field-deployed equipment, confirm lifecycle status, traceability, date-code controls, and a qualified alternate before freezing the production BOM.

What is BCM54640B0KFB?
Broadcom BCM54640B0KFB is an Ethernet interface IC in the BCM54640 family and is associated with SGMII networking connectivity. Its role is to connect digital Ethernet circuitry with physical-layer network interfaces in equipment such as switches, routers, access-network products, and communications systems. The exact port combination, supply voltages, data rates, package, and pin map should be confirmed in the manufacturer datasheet before the device is placed into a new design.
Where can I download the BCM54640B0KFB datasheet PDF?
The BCM54640B0KFB datasheet PDF can be accessed through the product link listed in the Data Sources section on this page. Use the Broadcom manufacturer document when finalizing the pinout, electrical limits, timing, package drawing, and reference circuit. The available PDF link is hosted by a third-party document repository, so verify the document number, revision, and device configuration against the manufacturer before release.
Where can I find the BCM54640B0KFB pinout?
The BCM54640B0KFB pinout must be taken from the Broadcom datasheet pin-description table because the available product records do not expose individual terminal names or numbering. Do not infer the footprint from the BCM54640B0KFBG or BCM54640B0IFBG family naming alone. Assign power, ground, SGMII, clock, reset, management, and transceiver pins only after confirming the exact package and ordering option.
What are the key specifications of BCM54640B0KFB that engineers should know?
The confirmed headline attribute is that BCM54640B0KFB is a Broadcom Ethernet interface IC associated with SGMII connectivity. Its exact port count, maximum data rate, voltage domains, operating temperature, package, and transceiver media are not published in the available product records. The most important engineering action is therefore to verify the complete BCM54640B0KFB datasheet and reference design against the host ASIC, magnetics, PCB stack-up, and thermal requirements.
Is BCM54640B0KFB suitable for a switch or router design?
BCM54640B0KFB is a candidate for switch, router, and communications equipment when the host processor supports the device's SGMII interface and the selected BCM54640 configuration matches the required copper or optical ports. Validate electrical levels, clocking, latency, firmware or register compatibility, and transceiver media before committing. Use the manufacturer reference design as the basis for high-speed layout and power distribution.
What can replace BCM54640B0KFB?
The closest documented same-family candidates are BCM54640B0KFBG and BCM54640B0IFBG, but neither can be assumed to be a drop-in replacement without confirming the package, pinout, port configuration, clocking, register behavior, and lifecycle status. No cross-brand drop-in equivalent is established by the available records. A replacement should be treated as a new engineering qualification unless Broadcom explicitly identifies it as pin-to-pin compatible.
Is BCM54640B0KFB the same as BCM54640B0KFBG?
BCM54640B0KFB and BCM54640B0KFBG belong to the same Broadcom BCM54640 naming family and appear in related product listings, but the G suffix may identify a different packing, temperature, or ordering option. Their interchangeability cannot be established from the available records alone. Compare the complete ordering codes, package markings, datasheet configuration, and manufacturer ordering information before treating the G variant as interchangeable.
What is the best Broadcom equivalent for BCM54640B0KFB?
BCM54640B0KFBG is the closest documented Broadcom-family option, while BCM54640B0IFBG provides another related ordering code for evaluation. Neither can be selected solely from the suffix because port configuration, speed grade, temperature grade, packing, and software support may differ. Request a manufacturer comparison and inspect the pin descriptions and ordering tables before designating either part as a drop-in replacement.
When should I choose BCM54640B0KFB over BCM54640B0KFBG?
Choose BCM54640B0KFB over BCM54640B0KFBG when the latter's ordering or packaging code does not match the required manufacturing configuration, while the original device remains available for the intended environment. The actual selection should be based on confirmed package, temperature grade, lifecycle status, and production continuity rather than the suffix alone. If both configurations meet every requirement, retain BCM54640B0KFB to minimize qualification effort.
How do BCM54640B0KFB and BCM54640B0IFBG differ?
BCM54640B0IFBG and BCM54640B0KFB are distinct Broadcom ordering codes within the BCM54640 family. The available comparison listing does not state their electrical differences, so the I and K coding cannot safely be translated into a specific speed, temperature, or feature change. Use the Broadcom ordering guide and individual datasheets to compare port configuration, media support, grade, package, and production status.
Where to buy BCM54640B0KFB online?
Use the Request a Quote form on this page to request BCM54640B0KFB availability, unit pricing, quantity breaks, and lead time. Confirm the exact ordering code, package, and date code when submitting the request. Current stock should be established through the quote response rather than inferred from a search-result page or the continued availability of a related family member.
What is the price of BCM54640B0KFB?
Current pricing for BCM54640B0KFB should be obtained through the Request a Quote form on this page. A quote can account for the requested quantity, exact ordering suffix, manufacturer traceability, packaging, and delivery requirements. The available product records do not print a quantity-break price for this exact MPN, so no price value should be treated as a confirmed quotation.
What is the lead time for BCM54640B0KFB?
The current lead time for BCM54640B0KFB must be confirmed through the Request a Quote form on this page. When requesting the lead time, state the required order quantity, target date, acceptable packaging, date-code requirement, and whether substitutions are permitted if the original part is unavailable. Lifecycle and allocation status should also be requested because family availability can change without altering the ordering code.
Is BCM54640B0KFB in stock?
Current BCM54640B0KFB stock is not confirmed by the available product records, so availability should be requested through the Request a Quote form on this page. Provide the required quantity and target delivery date. Do not assume that a related BCM54640B0KFBG or BCM54640B0IFBG listing establishes inventory for the exact BCM54640B0KFB ordering code.
What design checks are needed for a BCM54640B0KFB Ethernet board?
A BCM54640B0KFB board should be checked against the manufacturer reference design for stack-up, controlled impedance, SGMII routing, clocking, decoupling, reset, transceiver media, magnetics, isolation, and thermal management. Keep high-speed interfaces away from switching nodes and noisy return currents, and follow the exact package land pattern. Final timing, voltage, and pin assignments require the Broadcom datasheet because these details are absent from the available records.

Données de référence d'ingénierie pour BCM54640B0KFB — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose BCM54640B0KFB when its confirmed ordering configuration matches the required Ethernet port mix, SGMII host interface, package, temperature grade, and lifecycle expectations. It is particularly suitable for switch, router, access-network, and communications equipment designs where a Broadcom SGMII interface reduces board complexity. BCM54640B0KFBG should be considered when its manufacturer-defined ordering differences are acceptable and it offers the required production configuration, but the suffix must not be interpreted as proof of interchangeability. BCM54640B0IFBG is another same-family option that may suit a different configuration or grade; its suitability depends on the complete ordering table. No cross-brand equivalent should be selected without a manufacturer-confirmed pinout, electrical, timing, media, and software match. Before committing any option, verify the package, pin map, supply rails, data rate, operating temperature, lifecycle status, and reference design.

Comparaison avec les alternatives

Paramètre Ce produit BCM54640B0KFBG BCM54640B0IFBG
Brand Broadcom Broadcom Broadcom
Product Family BCM54640 BCM54640 BCM54640

Principaux différenciateurs

  • Original Broadcom ordering option (vs BCM54640B0KFBG)
  • Alternative BCM54640 family ordering option (vs BCM54640B0IFBG)
  • SGMII-focused Ethernet integration (vs BCM54640B0KFBG)

Notes de conception

Route SGMII and reference-clock signals on a controlled-impedance board stack-up that matches the Broadcom reference design. Use a continuous reference plane, minimize vias and stubs, and avoid splitting return current beneath high-speed pairs. Keep the clock source and traces away from switching regulators, Ethernet magnetics, and connector-return paths. Confirm trace geometry, spacing, and length behavior from the manufacturer layout because the exact package and interface timing are not stated in the available product records.

Implement the BCM54640B0KFB supply network with the manufacturer-recommended topology, including local high-frequency decoupling, adequate bulk capacitance, and separate filtering paths for noisy and sensitive rails. Place the smallest effective bypass capacitors directly beside the relevant power terminals and provide a low-impedance ground connection. Confirm capacitor voltage ratings, DC-bias effects, startup sequencing, and the device's maximum supply tolerances in the datasheet before finalizing the power tree.

Use the exact Broadcom land pattern and assembly information associated with the BCM54640B0KFB ordering code. Check the pin-one orientation, exposed thermal features, solder-mask and paste details, and any keep-out or via requirements against the package drawing. Do not copy the footprint from BCM54640B0KFBG or BCM54640B0IFBG unless Broadcom confirms that the package suffix is identical. Program the part identifier after placement and verify orientation during electrical inspection.

Avoid assuming that same-family ordering codes are automatically interchangeable. The available records do not quantify the differences between BCM54640B0KFB, BCM54640B0KFBG, and BCM54640B0IFBG, and those differences could involve grade, packing, configuration, or availability. Before substitution, compare the manufacturer ordering tables, pin descriptions, electrical characteristics, package drawings, and lifecycle information. Also verify the reset polarity and clock requirements against the host system.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations appear in the available product records. Confirm these attributes with Broadcom using the exact ordering code.

Recherches associées

BCM54640B0KFB datasheet BCM54640B0KFB specifications BCM54640B0KFB pinout BCM54640B0KFB datasheet pdf BCM54640B0KFB equivalent BCM54640B0KFB replacement BCM54640B0KFB price BCM54640B0KFB stock Broadcom BCM54640B0KFB BCM54640B0KFB vs BCM54640B0KFBG BCM54640 SGMII interface BCM54640B0KFB Ethernet switch

Composants & termes associés

Broadcom BCM54640B0KFB BCM54640B0KFBG BCM54640B0IFBG BCM54640 Ethernet interface IC Ethernet transceiver network interface controller interface IC integrated circuit SGMII Gigabit Ethernet Ethernet switch router access network equipment industrial Ethernet gateway network interface card communications equipment reference clock controlled impedance signal integrity Ethernet magnetics SGMII routing semiconductor
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ