BCM84861KFSBG Single-Port 10GBASE-T PHY | Broadcom
Référence : BCM84861KFSBG ✓ ActifBCM84861KFSBG Présentation
A 10GBASE-T PHY is the physical-layer component in an Ethernet design. It translates high-speed serial data into electrical signaling for copper cabling and receives the corresponding return signal. In the Ethernet hierarchy, this transceiver sits between the MAC and network medium: the MAC handles frame processing, while the PHY manages electrical transmission, reception, line coding, and link status. Broadcom's BCM84861 family therefore belongs to the interface IC and Ethernet transceiver product categories used in network switches, routers, servers, and industrial communication systems.
The primary documented features of the BCM84861KFSBG are its single-port configuration, 10GBASE-T support, and 28 nm CMOS implementation. A single-port architecture gives a compact option for point-to-point 10-gigabit copper links in systems where a multiport PHY would add unnecessary area, power, or board complexity. The 28 nm process provides the transistor density required for the PHY's mixed-signal circuitry and digital control functions within a small surface-mount package.
The PHY integrates the analog transceiver and digital control functions needed for copper-based 10-gigabit Ethernet. In a typical design, the PHY connects to a MAC or network processor through a high-speed digital interface and to an RJ45-based magnetic device through its copper-side analog interface. The external magnetics provide network isolation and impedance conditioning, while the PHY performs the signal generation, receive processing, and link control functions. Exact pin assignments, electrical limits, and supported operating modes should be taken from the Broadcom datasheet pin-description and timing tables.
Typical applications include 10-gigabit enterprise switches, server and storage network interfaces, network-interface cards, industrial Ethernet equipment, and router or gateway products. In these systems, the BCM84861KFSBG can serve one 10GBASE-T copper port while the surrounding processor handles packet processing and upper-layer networking functions. Its single-port format is particularly suitable for pluggable modules, compact controllers, and dedicated network cards where one copper port is sufficient.
Board design should preserve high-speed signal integrity from the PHY through the package, PCB traces, magnetics, and connector. Differential pairs should have controlled impedance, continuous reference planes, minimal stubs, and symmetric routing. Decoupling should follow the values and placement specified in the manufacturer datasheet, while exposed-pad or thermal-management requirements must be met according to the exact package drawing. Power sequencing and I/O voltage compatibility should also be checked before integrating the device with a MAC or processor.
This product page combines the Broadcom device identity, 28 nm single-port 10GBASE-T positioning, package-specific sourcing information, comparison guidance, and practical PCB design considerations. It is intended to help engineers confirm interface requirements, evaluate a possible same-family replacement, and plan an implementation that preserves signal integrity and thermal performance.
Alternatives de remplacement direct pour BCM84861KFSBG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
BCM84861A0KFSBG
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BCM84861KFSBG Valeurs maximales et caractéristiques électriques
| Device Type | Single-port 10GBASE-T Ethernet PHY |
| Ethernet Standard | 10GBASE-T |
| Port Count | 1 port |
| Process Technology | 28 nm |
| Media Type | Twisted-pair copper |
| Débit de données | 10 Gbit/s |
| Product Family | BCM84861 |
| Manufacturer | Broadcom Limited |
| Catégorie | Drivers, Receivers, Transceivers |
| Type de montage | Surface mount |
| Statut RoHS | RoHS compliant |
Guide de configuration des broches du BCM84861KFSBG standard
Configuration des broches du BCM84861KFSBG (boîtier standard). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour BCM84861KFSBG.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
BCM84861KFSBG convient pour 6 applications: 10-Gigabit Enterprise Switch Port, Server Network-Interface Card, Network Processor Gateway, Industrial Ethernet Controller, Pluggable 10GBASE-T Module, Secure Network Appliance.
10-Gigabit Enterprise Switch Port
The BCM84861KFSBG can implement one 10GBASE-T copper port in an enterprise switch line card. Its documented single-port 10GBASE-T configuration and 28 nm implementation suit designs that need one high-speed copper endpoint per PHY instance while a switching ASIC handles packet forwarding. The board design should provide controlled-impedance differential routing, suitable magnetics, local decoupling, and a copper thermal area under the package. Because the component handles an analog-ended Ethernet link, validate insertion loss, return loss, radiated emissions, and link behavior across the supported temperature range. The device is most appropriate when the surrounding MAC, switch fabric, and system firmware are already configured for the BCM84861 family.
Recommandé
Server Network-Interface Card
The BCM84861KFSBG is suited to a server or storage network card that needs a dedicated 10-gigabit copper link. Its single-port architecture avoids adding a multiport transceiver where only one RJ45 path is required, while the 28 nm PHY provides the physical layer beneath a high-speed network processor or MAC. Layout must separate the digital host interface from the analog copper interface, use short reference-plane-backed differential routes, and place filtering and protection components according to the manufacturer reference layout. Validate the complete channel through magnetics and connectors because PHY compliance alone does not guarantee system-level EMC performance. Firmware, device initialization, and thermal monitoring should be included in production test procedures.
Recommandé
Network Processor Gateway
A network processor gateway can use the BCM84861KFSBG as the copper-facing physical layer for a 10-gigabit uplink. This arrangement is useful where a processor provides routing, security, storage, or protocol services while the Broadcom PHY handles the 10GBASE-T copper medium. The design should budget carefully for power and thermal dissipation, provide stable supply rails, and follow the manufacturer pin and decoupling requirements exactly. High-speed digital traces should avoid crossing split planes, and the copper-side network section should maintain symmetry through magnetics and the RJ45 connector. Firmware initialization and autonegotiation behavior must be integrated with the gateway software and tested under cable insertion, removal, and link-speed transition conditions.
Recommandé
Industrial Ethernet Controller
The BCM84861KFSBG can support a high-speed industrial Ethernet endpoint where a controller requires 10-gigabit copper connectivity. Its single-port configuration fits compact control cabinets, industrial gateways, and communication modules that need a single high-bandwidth service port rather than a multiport copper switch. Industrial implementations should verify the device's supported temperature range, power behavior, and EMC requirements during qualification. The PCB needs uninterrupted return paths beneath differential pairs, careful grounding between analog and digital regions, and filtering that preserves the intended Ethernet channel performance. Include programmable control of the PHY through the host interface, recovery after link interruption, and production testing across representative cable lengths and temperatures.
Recommandé
Pluggable 10GBASE-T Module
The BCM84861KFSBG is appropriate for a compact pluggable module that exposes one 10GBASE-T copper port. A single-port PHY keeps the module's electrical and thermal design simpler than a multiport implementation while preserving a 10 Gbit/s line rate. The module PCB should minimize trace length from the PHY to its digital host interface and from the PHY toward the network magnetics. Maintain controlled differential impedance, provide multiple decoupling paths, and apply the package's exposed-pad and thermal requirements without introducing discontinuity to high-speed return currents. Connector and cage design, insertion-loss budget, and the external magnetics must be validated together. Host-side software should handle initialization, status reporting, and firmware updates across the module's operating environment.
Recommandé
Secure Network Appliance
The BCM84861KFSBG can provide a high-speed copper management or data port in a firewall, secure gateway, or network appliance. Using a dedicated PHY for 10GBASE-T allows the host processor to concentrate on packet inspection, encryption, and policy processing while the Broadcom device handles the physical layer. The implementation should use a quiet supply arrangement, low-impedance ground distribution, and carefully partitioned analog and digital circuitry to reduce coupling into the Ethernet channel. Validate the complete design for EMC and conducted or radiated emissions because magnetics and connectors can dominate system behavior. Production testing should include link training, cable insertion, remote fault handling, and verification of the thermal profile during sustained 10-gigabit traffic.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour BCM84861KFSBG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | BCM84861A0KFSBG |
|---|---|---|
| Package | default | default |
| Brand | Broadcom | Broadcom |
| Port Configuration | Single-port | Single-port |
| Ethernet Support | 10GBASE-T | 10GBASE-T |
| Line Rate | 10 Gbit/s | 10 Gbit/s |
| Process Technology | 28 nm | 28 nm |
| Family | BCM84861 | BCM84861 |
| Package Code | KFSB | KFSB |
Principaux différenciateurs
- Focused single-port architecture (vs BCM84861A0KFSBG)
- Same-family 28 nm implementation (vs BCM84861A0KFSBG)
- Compatible package-code basis (vs BCM84861A0KFSBG)
Notes de conception
Route all high-speed differential pairs as impedance-controlled, continuously referenced paths with matched via structures and no unterminated stubs. Keep the PHY-to-host digital interface and PHY-to-magnetics copper interface short, and avoid crossing plane boundaries. Confirm target impedance, insertion-loss, return-loss, and crosstalk budgets using the board stack-up before schematic release. Validation should include the magnetics and connector because those elements materially affect the completed 10GBASE-T channel.
Partition the board into digital-host, analog-PHY, and copper-side regions, while preserving an uninterrupted ground reference beneath sensitive routes. Place local decoupling at the corresponding power pins and avoid sharing narrow current paths between the host interface and analog circuitry. Follow the manufacturer package drawing for exposed-pad, solder-mask, paste, and land-pattern requirements. Do not infer the physical pin count or pad geometry from the KFSB ordering code.
Treat the BCM84861KFSBG as a mixed-signal Ethernet transceiver requiring an explicit thermal budget. Use the datasheet's maximum power, junction-temperature, and package data to calculate worst-case dissipation at the highest specified ambient temperature and traffic load. Provide the recommended PCB copper area and ensure that enclosure airflow does not trap heat. Measure junction or board temperature during sustained link activity because an idle bench test does not represent maximum operating dissipation.
Do not substitute BCM84861A0KFSBG solely because it shares the BCM84861 family name and KFSB package code. First verify the exact ordering-code meaning, package drawing, pin table, electrical limits, supported host interface, and required firmware. A same-package appearance does not prove firmware or revision compatibility. Obtain written manufacturer approval and perform board-level regression testing before introducing the alternate MPN into production.
Informations de conformité
The available product index identifies BCM84861KFSBG as RoHS compliant. REACH, AEC-Q100 qualification, lead-free, halogen-free, and conflict-minerals declarations were not established for the exact MPN.