Broadcom

BCM84861KFSBG Single-Port 10GBASE-T PHY | Broadcom

부품 번호: BCM84861KFSBG ✓ 활성
MOQ: 1 |

BCM84861KFSBG 개요

The Broadcom BCM84861KFSBG is a single-port 10GBASE-T Ethernet physical-layer transceiver built on a 28 nm process. It provides the physical-layer functions required to connect a digital Ethernet controller, switch, or processor to a 10GBASE-T copper network over twisted-pair cabling. The device is identified as a single-port MG/10GBASE-T PHY and is intended for high-speed networking, enterprise infrastructure, and data-center equipment requiring 10-gigabit Ethernet connectivity.

A 10GBASE-T PHY is the physical-layer component in an Ethernet design. It translates high-speed serial data into electrical signaling for copper cabling and receives the corresponding return signal. In the Ethernet hierarchy, this transceiver sits between the MAC and network medium: the MAC handles frame processing, while the PHY manages electrical transmission, reception, line coding, and link status. Broadcom's BCM84861 family therefore belongs to the interface IC and Ethernet transceiver product categories used in network switches, routers, servers, and industrial communication systems.

The primary documented features of the BCM84861KFSBG are its single-port configuration, 10GBASE-T support, and 28 nm CMOS implementation. A single-port architecture gives a compact option for point-to-point 10-gigabit copper links in systems where a multiport PHY would add unnecessary area, power, or board complexity. The 28 nm process provides the transistor density required for the PHY's mixed-signal circuitry and digital control functions within a small surface-mount package.

The PHY integrates the analog transceiver and digital control functions needed for copper-based 10-gigabit Ethernet. In a typical design, the PHY connects to a MAC or network processor through a high-speed digital interface and to an RJ45-based magnetic device through its copper-side analog interface. The external magnetics provide network isolation and impedance conditioning, while the PHY performs the signal generation, receive processing, and link control functions. Exact pin assignments, electrical limits, and supported operating modes should be taken from the Broadcom datasheet pin-description and timing tables.

Typical applications include 10-gigabit enterprise switches, server and storage network interfaces, network-interface cards, industrial Ethernet equipment, and router or gateway products. In these systems, the BCM84861KFSBG can serve one 10GBASE-T copper port while the surrounding processor handles packet processing and upper-layer networking functions. Its single-port format is particularly suitable for pluggable modules, compact controllers, and dedicated network cards where one copper port is sufficient.

Board design should preserve high-speed signal integrity from the PHY through the package, PCB traces, magnetics, and connector. Differential pairs should have controlled impedance, continuous reference planes, minimal stubs, and symmetric routing. Decoupling should follow the values and placement specified in the manufacturer datasheet, while exposed-pad or thermal-management requirements must be met according to the exact package drawing. Power sequencing and I/O voltage compatibility should also be checked before integrating the device with a MAC or processor.

This product page combines the Broadcom device identity, 28 nm single-port 10GBASE-T positioning, package-specific sourcing information, comparison guidance, and practical PCB design considerations. It is intended to help engineers confirm interface requirements, evaluate a possible same-family replacement, and plan an implementation that preserves signal integrity and thermal performance.

드롭인 대체품: BCM84861KFSBG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

BCM84861A0KFSBG

✅ 드롭인
📦 default
The A0 ordering code may identify a different device revision; available records confirm the same BCM84861 family, 10GBASE-T function, and KFSB package code but do not quantify an electrical difference.

📋 참조 대체품 (카탈로그에 없음)

BCM84861KFSBG 최대 정격 & 전기적 특성

Device Type Single-port 10GBASE-T Ethernet PHY
Ethernet Standard 10GBASE-T
Port Count 1 port
Process Technology 28 nm
Media Type Twisted-pair copper
데이터 속도 10 Gbit/s
Product Family BCM84861
Manufacturer Broadcom Limited
카테고리 Drivers, Receivers, Transceivers
실장 유형 Surface mount
RoHS 상태 RoHS compliant

BCM84861KFSBG standard 핀 구성 가이드

BCM84861KFSBG(standard 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

BCM84861KFSBG의 standard 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: BCM84861KFSBG.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

BCM84861KFSBG 적합 용도: 6 애플리케이션s: 10-Gigabit Enterprise Switch Port, Server Network-Interface Card, Network Processor Gateway, Industrial Ethernet Controller, Pluggable 10GBASE-T Module, Secure Network Appliance.

🌐

10-Gigabit Enterprise Switch Port

The BCM84861KFSBG can implement one 10GBASE-T copper port in an enterprise switch line card. Its documented single-port 10GBASE-T configuration and 28 nm implementation suit designs that need one high-speed copper endpoint per PHY instance while a switching ASIC handles packet forwarding. The board design should provide controlled-impedance differential routing, suitable magnetics, local decoupling, and a copper thermal area under the package. Because the component handles an analog-ended Ethernet link, validate insertion loss, return loss, radiated emissions, and link behavior across the supported temperature range. The device is most appropriate when the surrounding MAC, switch fabric, and system firmware are already configured for the BCM84861 family.

🖥️

Server Network-Interface Card

The BCM84861KFSBG is suited to a server or storage network card that needs a dedicated 10-gigabit copper link. Its single-port architecture avoids adding a multiport transceiver where only one RJ45 path is required, while the 28 nm PHY provides the physical layer beneath a high-speed network processor or MAC. Layout must separate the digital host interface from the analog copper interface, use short reference-plane-backed differential routes, and place filtering and protection components according to the manufacturer reference layout. Validate the complete channel through magnetics and connectors because PHY compliance alone does not guarantee system-level EMC performance. Firmware, device initialization, and thermal monitoring should be included in production test procedures.

🔧

Network Processor Gateway

A network processor gateway can use the BCM84861KFSBG as the copper-facing physical layer for a 10-gigabit uplink. This arrangement is useful where a processor provides routing, security, storage, or protocol services while the Broadcom PHY handles the 10GBASE-T copper medium. The design should budget carefully for power and thermal dissipation, provide stable supply rails, and follow the manufacturer pin and decoupling requirements exactly. High-speed digital traces should avoid crossing split planes, and the copper-side network section should maintain symmetry through magnetics and the RJ45 connector. Firmware initialization and autonegotiation behavior must be integrated with the gateway software and tested under cable insertion, removal, and link-speed transition conditions.

🏭

Industrial Ethernet Controller

The BCM84861KFSBG can support a high-speed industrial Ethernet endpoint where a controller requires 10-gigabit copper connectivity. Its single-port configuration fits compact control cabinets, industrial gateways, and communication modules that need a single high-bandwidth service port rather than a multiport copper switch. Industrial implementations should verify the device's supported temperature range, power behavior, and EMC requirements during qualification. The PCB needs uninterrupted return paths beneath differential pairs, careful grounding between analog and digital regions, and filtering that preserves the intended Ethernet channel performance. Include programmable control of the PHY through the host interface, recovery after link interruption, and production testing across representative cable lengths and temperatures.

🧩

Pluggable 10GBASE-T Module

The BCM84861KFSBG is appropriate for a compact pluggable module that exposes one 10GBASE-T copper port. A single-port PHY keeps the module's electrical and thermal design simpler than a multiport implementation while preserving a 10 Gbit/s line rate. The module PCB should minimize trace length from the PHY to its digital host interface and from the PHY toward the network magnetics. Maintain controlled differential impedance, provide multiple decoupling paths, and apply the package's exposed-pad and thermal requirements without introducing discontinuity to high-speed return currents. Connector and cage design, insertion-loss budget, and the external magnetics must be validated together. Host-side software should handle initialization, status reporting, and firmware updates across the module's operating environment.

📡

Secure Network Appliance

The BCM84861KFSBG can provide a high-speed copper management or data port in a firewall, secure gateway, or network appliance. Using a dedicated PHY for 10GBASE-T allows the host processor to concentrate on packet inspection, encryption, and policy processing while the Broadcom device handles the physical layer. The implementation should use a quiet supply arrangement, low-impedance ground distribution, and carefully partitioned analog and digital circuitry to reduce coupling into the Ethernet channel. Validate the complete design for EMC and conducted or radiated emissions because magnetics and connectors can dominate system behavior. Production testing should include link training, cable insertion, remote fault handling, and verification of the thermal profile during sustained 10-gigabit traffic.

추천 제품 요약

BCM84861KFSBG Broadcom 사용처: 10-Gigabit Enterprise Switch Port, Server Network-Interface Card, Network Processor Gateway, Industrial Ethernet Controller, Pluggable 10GBASE-T Module, Secure Network Appliance BCM84861A0KFSBG Closely related BCM84861 family candidate requiring approval before substitution 사용처: 10-Gigabit Enterprise Switch Port, Server Network-Interface Card, Network Processor Gateway, Industrial Ethernet Controller, Pluggable 10GBASE-T Module, Secure Network Appliance
What is the BCM84861KFSBG?
The BCM84861KFSBG is a Broadcom single-port 10GBASE-T Ethernet physical-layer transceiver. It is manufactured using a 28 nm process and is intended to provide the copper-medium physical layer for a 10-gigabit Ethernet link between a MAC or network processor and twisted-pair cabling. Broadcom categorizes the device as a driver, receiver, and transceiver IC.
Where can I download the BCM84861KFSBG datasheet?
The BCM84861KFSBG datasheet and documentation should be obtained through Broadcom's product support channel or the linked manufacturer-backed part record. The available part record identifies the BCM84861KFSBG as a single-port 28 nm MG/10GBASE-T PHY. Before schematic release, use the manufacturer datasheet for the authoritative pin-description table, electrical characteristics, timing limits, and package drawing.
Where can I find the BCM84861KFSBG pinout?
The BCM84861KFSBG pin assignment is documented in the Broadcom datasheet pin-description table. Because the exact package drawing is not published in the available product records, use the package suffix and ordering information to identify the correct drawing rather than relying on a generic diagram. Assign PCB nets from the manufacturer pin table and verify all exposed-pad and supply connections before fabrication.
What are the key specifications of BCM84861KFSBG that engineers should know?
The BCM84861KFSBG is a single-port 10GBASE-T PHY implemented in a 28 nm process. Its principal documented attributes are one copper-network port, support for the 10GBASE-T Ethernet standard, and a 10 Gbit/s line rate. The device belongs to Broadcom's integrated Ethernet transceiver family and is intended for direct integration with a MAC, switch, or network processor.
Is the BCM84861KFSBG suitable for a 10-gigabit Ethernet switch?
The BCM84861KFSBG is suitable for one 10GBASE-T copper port in a 10-gigabit Ethernet system. Its single-port architecture fits dedicated network cards, switch line cards, routers, and compact controllers that require one copper link rather than a multiport PHY array. System-level compatibility still depends on the MAC interface, supply rails, magnetics, cable reach, and firmware support.
Can BCM84861A0KFSBG replace BCM84861KFSBG?
BCM84861A0KFSBG is the closest same-family candidate located for BCM84861KFSBG because both carry the same Broadcom BCM84861 family designation and KFSB package code. It should be treated as a conditional replacement until the manufacturer confirms pin, firmware, and orderable-part compatibility. The two MPNs may represent different revisions, so the exact datasheet change record must be checked before substitution.
What is the best drop-in replacement for BCM84861KFSBG?
No fully qualified drop-in replacement can be identified from the available cross-reference records. BCM84861A0KFSBG is the only closely related MPN found in the same Broadcom family with the same KFSB package code, but its exact electrical and pin compatibility has not been established by a manufacturer comparison document. Request a manufacturer-approved substitution and compare the ordering codes, firmware requirements, datasheet revision, and exposed-pad layout before using it.
When should I choose BCM84861KFSBG over another 10GBASE-T PHY?
Choose the BCM84861KFSBG when the design specifically targets the Broadcom BCM84861 family, requires a single 10GBASE-T copper port, and can support its documented interface, power, and thermal implementation. For a multiport design, a different PHY with more channels may reduce package count; for a new platform without Broadcom firmware or support, broader interoperability may be more important than retaining the BCM84861 family.
How does BCM84861KFSBG compare with BCM84861A0KFSBG?
Both BCM84861KFSBG and BCM84861A0KFSBG are listed as Broadcom BCM84861 single-port 10GBASE-T devices with the KFSB package code. The visible product records do not identify the functional or revision difference between the exact MPNs. Consequently, they are close engineering candidates, but the manufacturer ordering information and datasheet revision history must be checked to confirm whether the A0 ordering code is interchangeable.
What is the BCM84861KFSBG price?
Use the Request a Quote form on this page for the current unit price, volume tiers, stock position, and lead time for BCM84861KFSBG. The visible distributor records do not print qualifying quantity-break prices for the exact MPN, so no static price table is reproduced here. A quote also lets the sourcing team confirm the exact KFSBG ordering code and authorized supply channel.
Where can I buy BCM84861KFSBG online?
Request a quote for BCM84861KFSBG through the Request a Quote form on this page. The form is the appropriate route for checking current availability, minimum order quantity, lead time, and volume pricing without relying on an outdated catalog value. Include the intended quantity, target package suffix, and whether the design requires a manufacturer-approved replacement or exact-ordering-code traceability.
Is BCM84861KFSBG in stock and what is its lead time?
Current stock and lead time for BCM84861KFSBG should be confirmed through the Request a Quote form on this page. The available Octopart result shows a stock update, but it does not establish a guaranteed quantity at the time of purchase or a production lead time. Your quote request should state the required quantity and target schedule so the current supply position can be matched to the build plan.
What power and thermal constraints apply to BCM84861KFSBG?
The exact supply rails, dissipation, junction-temperature limits, and package thermal data must be taken from the Broadcom datasheet for BCM84861KFSBG. The device combines digital control with sensitive analog Ethernet circuitry, so clean supply distribution and adequate thermal design are essential. Before layout release, verify the recommended decoupling, exposed-pad connection, copper area, airflow assumptions, and maximum operating temperature.
What design practices are important for a BCM84861KFSBG PCB?
A BCM84861KFSBG PCB should use short, impedance-controlled differential routes, a continuous reference plane, symmetric via geometry, and minimal stubs on high-speed interfaces. Place power and decoupling networks close to the device, route sensitive analog and digital sections according to the manufacturer layout guidance, and preserve the specified thermal-pad connection. Signal-integrity and EMC validation should include the magnetics and complete RJ45 implementation.
Is BCM84861KFSBG RoHS compliant?
The BCM84861KFSBG is identified as RoHS compliant in the available product index. RoHS status supports use in products subject to restrictions on hazardous substances, but it does not by itself establish REACH status, conflict-minerals reporting, automotive qualification, or halogen-free status. Request current material and environmental declarations for the exact ordering code and shipment configuration.

엔지니어링 참조 데이터: BCM84861KFSBG — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose BCM84861KFSBG when the system needs a single 10GBASE-T copper port and is already designed around Broadcom's BCM84861 family. Its documented combination of one port, a 10 Gbit/s line rate, a 28 nm process, and the KFSB package code makes it appropriate for switch line cards, server NICs, network-appliance ports, and compact modules. BCM84861A0KFSBG is the closest located alternative because it shares the family, function, and package code, but the A0 ordering code may denote a revision; approve it only after checking its exact datasheet, pin table, firmware requirements, and change history. Choose a multiport PHY instead when several copper endpoints must be consolidated into fewer packages, and choose a different vendor's PHY when interoperability, qualification, or long-term sourcing requirements are not centered on the Broadcom BCM84861 platform.

대체품과의 비교

파라미터 이 제품 BCM84861A0KFSBG
Package default default
Brand Broadcom Broadcom
Port Configuration Single-port Single-port
Ethernet Support 10GBASE-T 10GBASE-T
Line Rate 10 Gbit/s 10 Gbit/s
Process Technology 28 nm 28 nm
Family BCM84861 BCM84861
Package Code KFSB KFSB

주요 차별점

  • Focused single-port architecture (vs BCM84861A0KFSBG)
  • Same-family 28 nm implementation (vs BCM84861A0KFSBG)
  • Compatible package-code basis (vs BCM84861A0KFSBG)

설계 노트

Route all high-speed differential pairs as impedance-controlled, continuously referenced paths with matched via structures and no unterminated stubs. Keep the PHY-to-host digital interface and PHY-to-magnetics copper interface short, and avoid crossing plane boundaries. Confirm target impedance, insertion-loss, return-loss, and crosstalk budgets using the board stack-up before schematic release. Validation should include the magnetics and connector because those elements materially affect the completed 10GBASE-T channel.

Partition the board into digital-host, analog-PHY, and copper-side regions, while preserving an uninterrupted ground reference beneath sensitive routes. Place local decoupling at the corresponding power pins and avoid sharing narrow current paths between the host interface and analog circuitry. Follow the manufacturer package drawing for exposed-pad, solder-mask, paste, and land-pattern requirements. Do not infer the physical pin count or pad geometry from the KFSB ordering code.

Treat the BCM84861KFSBG as a mixed-signal Ethernet transceiver requiring an explicit thermal budget. Use the datasheet's maximum power, junction-temperature, and package data to calculate worst-case dissipation at the highest specified ambient temperature and traffic load. Provide the recommended PCB copper area and ensure that enclosure airflow does not trap heat. Measure junction or board temperature during sustained link activity because an idle bench test does not represent maximum operating dissipation.

Do not substitute BCM84861A0KFSBG solely because it shares the BCM84861 family name and KFSB package code. First verify the exact ordering-code meaning, package drawing, pin table, electrical limits, supported host interface, and required firmware. A same-package appearance does not prove firmware or revision compatibility. Obtain written manufacturer approval and perform board-level regression testing before introducing the alternate MPN into production.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available product index identifies BCM84861KFSBG as RoHS compliant. REACH, AEC-Q100 qualification, lead-free, halogen-free, and conflict-minerals declarations were not established for the exact MPN.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

BCM84861KFSBG datasheet BCM84861KFSBG specifications BCM84861KFSBG pinout BCM84861KFSBG equivalent BCM84861KFSBG replacement BCM84861KFSBG price BCM84861KFSBG stock Broadcom BCM84861KFSBG BCM84861 single port PHY BCM84861KFSBG vs BCM84861A0KFSBG BCM84861KFSBG footprint BCM84861 10GBASE-T application circuit

관련 부품 & 용어

Broadcom BCM84861KFSBG BCM84861A0KFSBG BCM84861 10GBASE-T Ethernet PHY physical-layer transceiver network transceiver interface IC 10 Gbit/s single-port 28 nm CMOS KFSB package code surface mount twisted-pair copper MAC network processor network switch RJ45 network magnetics differential impedance Power over Ethernet RoHS signal integrity thermal management
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기