ROHM Semiconductor

BD3180FV-E2 - High-Side Current Sense Amp | ROHM

Référence : BD3180FV-E2 ✓ Actif
8-SSOP Package
MOQ : 1 |

BD3180FV-E2 Présentation

The ROHM BD3180FV-E2 is a single-circuit high-side current sense amplifier packaged in an 8-pin SSOP. It is designed for compact systems that require accurate current measurement in a conductor carrying high-side supply voltage. Its high input common-mode voltage range supports current monitoring above the ground-referenced voltage normally tolerated by basic transistor amplifiers, while its low input offset reduces measurement error in precision applications.

A current sense amplifier is a specialized analog amplifier that measures the voltage across a low-value shunt resistor and converts that differential signal into a proportional output voltage. In the measurement chain, the shunt resistor -> current sense amplifier -> analog-to-digital converter -> host processor, the amplifier must reject supply noise, offset error, and common-mode voltage without saturating.

The BD3180FV-E2 provides one measurement channel in a compact 8-SSOP package. Its single-channel arrangement suits power-management controllers, motor-control systems, battery-management equipment, and compact industrial modules where board area is restricted. The manufacturer's BD3180FV documentation identifies the device as a super high accuracy current detection amplifier.

The 8-SSOP package allows the amplifier to be mounted alongside a shunt resistor and analog-to-digital converter on a densely populated printed circuit board. Because the output of a current sense amplifier reflects both the measured current and the amplifier's gain, calibration and shunt selection must be coordinated. Keep shunt connections short and route the differential sense traces as a compact, matched pair to limit pickup from switching nodes.

Typical uses include DC motor current regulation in consumer appliances, current feedback in LED lighting systems, load monitoring in industrial control boards, and protection functions in power-conversion equipment. The amplifier is particularly relevant where the monitored rail sits at a voltage well above ground and a conventional low-voltage amplifier would lack sufficient common-mode headroom.

For the best measurement result, select the shunt resistance and amplifier gain together so that the maximum expected current produces an output within the input range of the downstream converter. Place input and reference components close to their associated pins, verify the complete sense path against the manufacturer's application guidance, and confirm the maximum common-mode voltage against the specific operating rail.

This page organizes the BD3180FV-E2 package information, technical attributes, application guidance, and sourcing questions into a single engineering reference. It also identifies which parameters require confirmation from the manufacturer datasheet before a production design is released.

Alternatives de remplacement direct pour BD3180FV-E2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

BD3180FV-E2 Valeurs maximales et caractéristiques électriques

Product Type High-side current sense amplifier
Manufacturer Description Super high accuracy current detection amplifier
Number of Circuits 1 circuit
Channel Count 1 channel
Boîtier 8-SSOP
Type de montage Surface mount

Guide de configuration des broches du BD3180FV-E2 8-ssop

Configuration des broches du BD3180FV-E2 (boîtier 8-ssop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 8-ssop pour le BD3180FV-E2

Aucune donnée de brochage détaillée disponible pour BD3180FV-E2.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

BD3180FV-E2 convient pour 6 applications: DC Motor Current Feedback, Power Supply Load Monitoring, LED Lighting Driver Regulation, Battery Charge Current Monitoring, Industrial Control Module Protection, Consumer Appliance Load Sensing.

🏭

DC Motor Current Feedback

BD3180FV-E2 fits motor drives that require an analog indication of supply current for torque control, stall detection, or current limiting. Its high-side input common-mode characteristic allows the shunt to sit in the positive motor rail instead of near ground. Place the amplifier near the shunt, route the sense pair away from motor-switching edges, and select the shunt and gain so peak current keeps the amplifier output within the controller input range.

⚡

Power Supply Load Monitoring

The single measurement channel in BD3180FV-E2 is suitable for monitoring load current in a compact AC-DC or DC-DC power module. High-side sensing keeps the shunt installation simple and avoids grounding the monitored rail through a low-side shunt path. Confirm that the monitored rail stays inside the amplifier's common-mode limits, then feed the output into an analog-to-digital converter for telemetry, overload reporting, or adaptive power management.

💡

LED Lighting Driver Regulation

BD3180FV-E2 can provide the current feedback signal required by a constant-current LED driver that regulates power from a high-side source. Placing a shunt in the LED supply path and amplifying its differential voltage creates a measurement proportional to LED current, allowing the controller to compensate for forward-voltage variation. Keep the sense traces compact, verify the amplifier's common-mode range against the LED rail, and account for shunt power at the maximum LED current.

🔋

Battery Charge Current Monitoring

BD3180FV-E2 is applicable to battery-management circuitry that measures charge or discharge current in a high-side conductor. The 8-SSOP package supports compact control boards, while the dedicated current sense amplifier simplifies implementation compared with a discrete differential amplifier network. The shunt value must be chosen for the lowest current that must be resolved, and the gain, offset, and analog-to-digital converter resolution must be evaluated as a combined measurement chain.

🔧

Industrial Control Module Protection

BD3180FV-E2 supports fast protection functions in compact industrial controllers where a motor, actuator, or solenoid load must be limited to a safe current. The amplifier output can feed a comparator and logic stage for an overcurrent event, while an ADC path can preserve the measurement for diagnostics. Set the threshold with margin for component tolerances, confirm the amplifier's response time, and keep the high-current switching paths away from the shunt connections.

🏠

Consumer Appliance Load Sensing

BD3180FV-E2 can support load detection, heater regulation, and energy-related feedback in compact consumer appliances. The single-channel 8-SSOP device occupies little board area and measures a high-side rail without requiring the controlled load to share a low-side sensing return with the controller. Select the shunt for both power handling and measurement resolution, and verify the thermal performance of the complete sense path rather than only the amplifier package.

Where to buy BD3180FV-E2 online?
Use the Request a Quote form on this page to request BD3180FV-E2 pricing, stock confirmation, and order handling. The component is a ROHM Semiconductor current sense amplifier with one measurement circuit in an 8-SSOP surface-mount package. Because quantity breaks and inventory change frequently, a current quotation is the most reliable way to establish the commercial terms for your production quantity and target schedule.
What is the price of BD3180FV-E2?
The current price for BD3180FV-E2 is established through the Request a Quote form on this page. The device is a single-channel, high-side current sense amplifier in an 8-SSOP package, and pricing normally depends on order quantity, shipment destination, and inventory status. Submit the required quantity and target delivery date with your request so the commercial offer reflects the actual manufacturing and logistics requirement.
What is the lead time for BD3180FV-E2?
Request the current lead time for BD3180FV-E2 using the Request a Quote form on this page. Lead time depends on the requested quantity, production availability, and the shipment destination, so it should be confirmed for each order rather than assumed from a generic listing. Include your scheduled assembly date and requested annual usage in the request to support an appropriate allocation and delivery plan.
Is BD3180FV-E2 in stock?
Stock status for BD3180FV-E2 must be confirmed through the Request a Quote form on this page. This ROHM Semiconductor device is a one-circuit current sense amplifier in an 8-SSOP package, but inventory at a given quantity can change between orders. Provide your required quantities, production dates, and acceptable pack format in the request so the response can reflect a usable supply commitment.
What is the difference between BD3180FV-E2 and BD3180FV?
BD3180FV-E2 is the orderable ROHM ordering designation associated with the BD3180FV current detection amplifier, while BD3180FV is the base device designation. The BD3180FV documentation is a six-page PDF describing a super high accuracy current detection amplifier, and distributor records identify the -E2 version as an 8-SSOP one-circuit device. Confirm the exact suffix, pin configuration, and packing option against the manufacturer documentation before releasing a purchase order.
How does BD3180FV-E2 compare with a discrete shunt monitor circuit?
The BD3180FV-E2 integrates the differential current measurement function into one 8-SSOP device, while a discrete shunt monitor requires a shunt resistor, amplifier, and compensation network. The integrated approach can reduce component count and simplify high-side layout, but the discrete approach can offer greater freedom in gain, bandwidth, and cost optimization. Final selection depends on the shunt value, common-mode range, accuracy target, and required response time.
When should I choose BD3180FV-E2 for a high-side current measurement?
Choose BD3180FV-E2 when the design needs a dedicated high-side current sense amplifier in a compact 8-SSOP footprint and the monitored conductor sits at a voltage above the output capability of a basic ground-referenced amplifier. The device is described as a super high accuracy current detection amplifier with high input common-mode range and low input offset. Verify its exact gain, supply limits, and common-mode ratings against the datasheet before finalizing the signal chain.
Is BD3180FV-E2 suitable for motor current feedback?
BD3180FV-E2 is suitable for motor current feedback when the amplifier's common-mode range covers the motor rail and its response time satisfies the control loop. Place the shunt in the motor supply path and use the amplifier to produce a proportional voltage for an analog-to-digital converter or comparator. Motor systems also require careful separation of sense traces from switching edges, plus thermal review of the shunt at peak current.
What can replace BD3180FV-E2?
A drop-in replacement for BD3180FV-E2 must match the 8-SSOP footprint, pin assignment, supply arrangement, common-mode range, gain, and output characteristics. No manufacturer-specified substitute was identified for this exact ordering code, so an unverified part should not be assumed to be interchangeable. Request a replacement evaluation with the required shunt value, supply voltage, accuracy target, and bandwidth through the Request a Quote form on this page.
What is the best cross-brand equivalent for BD3180FV-E2?
There is no verified cross-brand equivalent for BD3180FV-E2 that can be presented as a confirmed drop-in replacement. A suitable alternative would require the same 8-SSOP pin arrangement or an explicitly documented pin mapping, along with comparable common-mode voltage range, gain, offset, supply voltage, and bandwidth. Request a component cross-reference review through the Request a Quote form and provide the complete operating conditions for evaluation.
Where to download the BD3180FV-E2 datasheet PDF?
The BD3180FV datasheet PDF is available through the datasheet link on this page and documents the ROHM BD3180FV current detection amplifier in a six-page file. The distributor product records for BD3180FV-E2 identify the same device family as a one-circuit, 8-SSOP current sense amplifier. Use the manufacturer document to verify the pin description, electrical characteristics, typical application circuit, and recommended external components.
Where can I find the BD3180FV-E2 pinout?
The BD3180FV-E2 pin assignment is identified in the pin-description section of the BD3180FV manufacturer datasheet. Distributor records identify the device as an 8-SSOP current sense amplifier, but individual signal names must be taken from the datasheet rather than inferred from the package type. Use that table to assign the shunt inputs, reference connection, supply pins, and output before laying out the PCB.
What are the key specifications of BD3180FV-E2?
BD3180FV-E2 is a single-circuit high-side current sense amplifier in an 8-SSOP surface-mount package. The device is described as a super high accuracy current detection amplifier, with high input common-mode voltage range and low input offset identified as principal characteristics. Its exact gain, supply voltage range, offset values, bandwidth, and output limits must be confirmed from the manufacturer datasheet before a design uses them as design inputs.
What does the current sense amplifier in BD3180FV-E2 measure?
BD3180FV-E2 measures the differential voltage produced across a low-value shunt resistor and provides a proportional amplifier output for downstream measurement or control. The common-mode input handling supports sensing on a supply rail rather than only near ground. The sensed current is calculated from the shunt resistance and the calibrated gain, so the maximum current, minimum resolution, and amplifier offset must be evaluated together.
How should I lay out the BD3180FV-E2 current-sense circuit?
Route the two shunt connections as a short, closely spaced differential pair directly from the shunt pads to the amplifier inputs. Avoid placing the sense path beneath or beside switching nodes, motor phases, and high-current return conductors because those nets can couple into the measurement. Keep the reference and gain-setting components close to their relevant pins, and use the manufacturer's typical application layout to minimize added parasitic resistance and inductance.

Données de référence d'ingénierie pour BD3180FV-E2 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose BD3180FV-E2 when the design requires a dedicated, single-channel high-side current measurement and the monitored conductor sits above ground. It is a strong fit for motor drives, LED drivers, industrial control modules, and compact power systems where a proportional current signal is needed for control or protection. Before selecting it, confirm the supply range, gain, offset, bandwidth, and maximum common-mode voltage against the exact operating conditions. For a drop-in substitution, require the same 8-SSOP pin arrangement and equivalent electrical ratings rather than relying on the current sense amplifier category alone. If the design needs more than one channel, a different multi-channel architecture may reduce assembly effort. If the monitored rail is close to ground and only a simple limit signal is required, a lower-cost discrete solution may be sufficient.

Comparaison avec les alternatives

Paramètre Ce produit
Brand ROHM Semiconductor
Package 8-SSOP
Product Type High-side current sense amplifier
Number of Circuits 1 circuit
Mounting Type Surface mount

Principaux différenciateurs

  • Dedicated high-side current measurement in a compact package (vs Discrete shunt-amplifier implementation)
  • Common-mode range suited to elevated sensing rails (vs Basic ground-referenced signal amplifier)
  • Accuracy-oriented current detection architecture (vs Simple transistor current switch)

Notes de conception

Place the shunt resistor and BD3180FV-E2 close to each other, and route the two sense connections as a short differential pair. The input traces should not run parallel to motor phases, switching-node copper, or high-current return paths because capacitive and inductive coupling can appear as current-measurement error. If the shunt is remote from the amplifier, add the trace and connector resistance to the gain and offset calculation.

Check the maximum monitored-rail voltage against the amplifier's input common-mode range before committing the schematic. A high-side sense amplifier can still saturate if the conductor voltage exceeds that rating even when its supply pin is correct. Also verify that the shunt's power rating, the amplifier's supply voltage, and the output swing remain adequate at maximum load and minimum load conditions.

Treat the shunt as a precision resistive element rather than a general-purpose power resistor. Select a low temperature-coefficient part with adequate pulse tolerance and thermal margin, and avoid excessive temperature rise because resistance drift directly changes the current calculation. Pair gain-setting resistors with suitable tolerances and temperature coefficients, and treat amplifier offset as part of the minimum resolvable current.

Calculate shunt dissipation as I-squared-R before finalizing the current range, then confirm the amplifier's operating and quiescent current against the power-supply budget. At the maximum continuous load, the sense resistor may become the hottest component in the measurement path. Maintain copper area and thermal vias around both the shunt and the 8-SSOP package so current accuracy does not change as the assembly warms.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The BD3180FV documentation does not establish the RoHS, REACH, halogen-free, or conflict-minerals status for this ordering code. Confirm environmental and material compliance with the manufacturer before release.

Données vérifiées le : 2026-11-11 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

BD3180FV-E2 datasheet BD3180FV-E2 pinout BD3180FV-E2 current sense amplifier BD3180FV-E2 specifications BD3180FV-E2 8-SSOP BD3180FV datasheet pdf BD3180FV high side current sensing BD3180FV equivalent BD3180FV-E2 replacement BD3180FV-E2 price BD3180FV-E2 stock ROHM BD3180FV-E2

Composants & termes associés

ROHM Semiconductor BD3180FV-E2 BD3180FV current sense amplifier high-side current detection current detection amplifier instrumentation amplifier analog amplifier integrated circuit semiconductor SSOP package surface mount SMD shunt resistor differential measurement input common-mode voltage input offset voltage gain error analog-to-digital converter motor current feedback LED driver regulation battery current monitoring overcurrent protection RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ