C8051F005 - 25MHz 32KB Flash Mixed-Signal MCU | Silicon Labs
Référence : C8051F005 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $26.8764 | $26,88 |
| 10 | $26.8764 | $268,76 |
| 100 | $26.8764 | $2 687,64 |
| 500 | $26.8764 | $13 438,20 |
| 1 000 | $26.8764 | $26 876,40 |
C8051F005 Présentation
What is a mixed-signal microcontroller? A mixed-signal MCU combines a digital processor core with analog conversion and related peripherals on one integrated circuit. In the broader semiconductor hierarchy, the C8051F005 is an 8051-compatible microcontroller, an embedded processor, and a mixed-signal system-on-chip. Its integrated converters reduce the need for separate analog interface components while preserving programmable control over acquisition and output generation.
Key features include 25 MIPS throughput from a 25 MHz clock, a pipelined instruction architecture, 21 vectored interrupt sources, 12-bit ADC conversion capability up to 100 ksps, and a dual 12-bit DAC. The C8051F0xx family also provides comparator resources and an on-chip temperature sensor. These features support compact control systems that need both digital logic and measured or generated analog signals.
The C8051F005 is identified in the retrieved distributor data as an 8-bit MCU with 32 KB flash memory in a 64-TQFP package. The manufacturer datasheet search result specifies the C8051F005/6/7 group as having a 12-bit ADC and no missing codes within the stated ADC accuracy. The listed memory organization is 32K x 8 for flash, while the available data does not provide a complete verified RAM value for this exact MPN.
Typical uses include industrial measurement and control, sensor acquisition, low-speed communications, test equipment and embedded analog control. The 12-bit ADC is suitable for monitoring external sensors, while the DAC channels can generate control or reference signals. The 25 MIPS core provides more processing headroom than the original 8051 architecture for protocol handling, control loops and supervisory logic.
When designing around the C8051F005, verify the package footprint, supply limits, clock configuration, ADC inputs, DAC outputs and programming interface against the manufacturer datasheet. Because the retrieved sources do not provide the complete electrical limits or a verified pin-by-pin map, those values should not be inferred from generic 8051 devices. This page distinguishes exact verified facts from parameters requiring datasheet confirmation.
This page combines manufacturer and distributor source information with application guidance, purchasing context and an explicit validation record. It is intended to help engineers identify whether the C8051F005 matches a mixed-signal embedded-control requirement before committing to a design or sourcing a replacement.
Alternatives de remplacement direct pour C8051F005 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec C8051F005 (même facteur de forme et même empreinte) — différant par ADC Throughput, Maximum Clock Frequency, Program Memory.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesC8051F005 Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit mixed-signal microcontroller |
| Processor Core | 8051-compatible core |
| Fréquence d'horloge maximale | 25 MHz |
| Maximum Throughput | 25 MIPS |
| Program Memory | 32 KB flash, 32K x 8 |
| ADC Resolution | 12 bit |
| ADC Throughput | 100 ksps maximum stated for the family |
| DAC Resolution | 12 bit |
| DAC Channel Count | 2 |
| ADC Channel Count | 8 |
| Vectored Interrupt Sources | 21 |
| Supply Voltage Range | 2.7 V to 3.6 V |
| Boîtier | 64-TQFP, 10 x 10 mm |
| Type de montage | Surface mount |
| Comparator Count | 2 |
| On-Chip Temperature Sensor | Present |
| Programming/Flash | In-system programming family feature |
Guide de configuration des broches du C8051F005 64-tqfp, 10 x 10 mm
Configuration des broches du C8051F005 (boîtier 64-tqfp, 10 x 10 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour C8051F005.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
C8051F005 convient pour 6 applications: Industrial Sensor Acquisition, Programmable Analog Control, Test and Measurement Equipment, Embedded Data Logging, Communication-Assisted Control, Temperature and Environmental Monitoring.
Industrial Sensor Acquisition
The C8051F005 fits sensor-acquisition designs that need a fast 8-bit control core alongside a 12-bit ADC. Its eight ADC channels and programmable conversion throughput up to 100 ksps allow multiple analog inputs to be sampled under firmware control, while the 25 MIPS core can handle filtering, thresholding and state-machine logic. Use the device when the system must generate a digital result locally rather than send raw analog signals to a remote controller. The main design consideration is verifying the ADC input range, reference voltage, sample-and-hold behavior and acquisition timing in the manufacturer datasheet.
Recommandé
Programmable Analog Control
The C8051F005 is useful when a controller must produce one or two defined analog outputs in addition to processing digital logic. Its dual 12-bit DAC channels can represent control levels, reference points or test commands, while the 25 MHz 8051-compatible core executes the control algorithm. This integration can reduce the component count compared with a separate MCU and DAC arrangement. Before selecting it, confirm the DAC output range, settling behavior, output loading and whether the required waveform can be generated at the available update rate.
Recommandé
Test and Measurement Equipment
The C8051F005 can serve as the control and analog-interface MCU in compact test equipment because it combines digital processing, a 12-bit ADC and two DAC outputs. Firmware can coordinate stimulus generation, measurement capture, calibration data and front-panel control in one device. Its 21 vectored interrupt sources support event-driven acquisition and communication tasks. A practical design should reserve pins for the programming interface, analog reference, input protection and output buffering, while verifying the complete pinout rather than relying on a generic 64-pin TQFP drawing.
Recommandé
Embedded Data Logging
The C8051F005 can support embedded data logging when measurements must be digitized and processed near the source. Its 25 MIPS throughput provides headroom for buffering, calibration, event timestamping and communication tasks, while 32 KB of flash stores firmware and fixed parameters. The integrated ADC reduces the need for a separate conversion IC in modest measurement systems. Confirm available RAM, flash endurance, write timing and the intended nonvolatile storage strategy because the supplied verified data does not establish all memory and endurance figures.
Recommandé
Communication-Assisted Control
The C8051F005 is appropriate for compact control nodes that must respond to digital events while also monitoring or generating analog signals. The 8051-compatible software environment and 25 MIPS core can support protocol servicing, timers, interlocks and supervisory logic, while the ADC and DAC handle local analog functions. The 21 vectored interrupt sources help separate timing-sensitive events from background processing. Confirm interrupt priorities, peripheral resources, port multiplexing and communication timing in the datasheet before assigning functions to pins.
Recommandé
Temperature and Environmental Monitoring
The C8051F005 can be used in monitoring systems that combine an on-chip temperature sensor with external analog sensing. The manufacturer-related search result identifies an on-chip temperature sensor, while the 12-bit ADC supports additional sensor channels for local measurements. Firmware can calibrate readings, apply thresholds and report status through available digital peripherals. The sensor accuracy, calibration method, temperature range and channel multiplexing behavior were not supplied, so those values must be confirmed before making safety-related decisions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour C8051F005 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Silicon Labs |
| Package | 64-TQFP, 10 x 10 mm |
| Processor | 8-bit 8051-compatible core |
| Clock Frequency | 25 MHz |
| Throughput | Up to 25 MIPS |
| Program Memory | 32 KB flash, 32K x 8 |
| ADC | 12-bit, 8 channels |
| DAC | Dual 12-bit DAC |
| Interrupt Sources | 21 vectored interrupt sources |
| Supply Voltage | 2.7 V to 3.6 V |
Principaux différenciateurs
- Integrated 12-bit conversion resources (vs Basic 8051 microcontroller without the C8051F0xx mixed-signal peripherals)
- Higher documented throughput (vs Standard legacy 8051 execution performance)
- Mixed-signal integration in one package (vs Discrete MCU plus external ADC/DAC design)
Notes de conception
Reserve the C8051F005 analog supply, reference and converter connections according to the manufacturer layout guidance. Place input and output decoupling close to the relevant device pins, keep analog routing away from fast digital edges, and provide a clean return path. The retrieved sources confirm the 64-TQFP package but do not provide the full recommended land pattern or pin map, so verify both in the official datasheet before fabrication.
Design the 2.7 V to 3.6 V supply range with appropriate sequencing, filtering and local bypass. Because the C8051F005 combines digital logic with ADC and DAC resources, supply noise can affect both processing margin and analog measurement quality. Check absolute maximum limits, operating voltage conditions, ADC reference requirements and DAC output loading in the manufacturer datasheet rather than assuming that a nominal 3.3 V rail is sufficient for every peripheral state.
Do not substitute a generic 8051 or a similarly named C8051F0xx device without comparing the complete pinout and memory map. The supplied family information distinguishes 12-bit C8051F005/6/7 devices from 10-bit C8051F010/1/2 devices, and it does not establish that those parts are drop-in replacements. Validate clock settings, flash programming, ADC channels, DAC outputs, interrupts and software startup code on the exact replacement candidate.
Informations de conformité
The supplied verified results do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals status. Compliance must be confirmed for the exact ordering suffix and current manufacturer documentation.
