Silicon Labs

C8051F825-GS - 25MHz 8051 MCU with 8KB Flash | Silicon Labs

Référence : C8051F825-GS ✓ Actif
1.8 V to 3.6 V Vdss 16-pin SOIC Package 25 MHz Speed 8 KB (8K x 8) Memory
MOQ : 1 |

C8051F825-GS Présentation

The Silicon Labs C8051F825-GS is an 8-bit C8051F82x mixed-signal microcontroller operating at up to 25 MHz, with 8 KB of programmable flash memory, 256 bytes of RAM, a 10-bit ADC, and capacitive-touch capability in a 16-pin SOIC package. It combines an 8051-compatible CISC core with serial communications and mixed-signal peripherals for compact control systems.

An 8-bit microcontroller is a compact embedded-control component that executes firmware to monitor inputs, operate actuators, and manage communications. The C8051F825-GS belongs to the Mixed Signal ISP Flash MCU family, placing an 8051-compatible core, flash program memory, analog conversion, and capacitive-touch sensing within one device. This integration reduces external component count in compact industrial, consumer, and interface-control products.

Principal features include a 25 MHz maximum clock, 8 KB of flash memory organized as 8K x 8, 256 bytes of RAM, a 10-bit ADC, and eight capacitive-touch channels. The device supports I2C, SPI, and UART communication interfaces and operates across a 1.8 V to 3.6 V supply range. Its 16-pin SOIC package is suitable for conventional surface-mount assembly where a larger QFN package would be unnecessary.

The C8051F82x architecture combines deterministic 8051-compatible instruction execution with dedicated mixed-signal and communication peripherals. Flash memory permits field programming and firmware updates, while on-chip RAM supports working variables, stack operations, and communication buffers. The 10-bit ADC provides sufficient resolution for common control tasks, and capacitive-touch sensing allows direct user-interface keys or proximity elements to be implemented without separate switch devices.

Typical uses include compact temperature controllers, capacitive-panel user interfaces, low-cost sensor nodes, motor and relay controllers, industrial interface modules, and connected consumer accessories. The combination of I2C, SPI, and UART allows the MCU to communicate with sensors, displays, transceivers, and data-storage components while retaining a small 16-pin footprint.

PCB design should preserve the decoupling and exposed-pad requirements specified for the selected package, although the 16-pin SOIC does not use a bottom thermal pad. Keep the oscillator and sensitive analog inputs away from high-current switching paths, and follow the manufacturer’s recommended capacitor values and grounding arrangement. Confirm the exact peripheral assignments and startup behavior in the C8051F82x datasheet before releasing the PCB.

This product page consolidates the verified device characteristics, sourcing guidance, drop-in replacement limits, and practical design considerations needed to evaluate the C8051F825-GS. It also highlights where same-package devices differ in memory, analog resources, touch channels, or programming configuration, helping engineers distinguish a true replacement from a merely similar microcontroller.

Alternatives de remplacement direct pour C8051F825-GS — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

C8051F860-C-IS

✅ Remplacement direct
📦 16-SOIC
Uses the C8051F860 family rather than C8051F82x; exact flash, RAM, clock, ADC, touch-channel, and pin-multiplexing differences require datasheet validation.

📋 Alternative de référence (hors catalogue)

C8051F825-GS Valeurs maximales et caractéristiques électriques

Product Type 8-bit mixed-signal flash microcontroller
Core Architecture 8051-compatible CISC
Series C8051F82x
Fréquence d'horloge maximale 25 MHz
Flash Memory 8 KB (8K x 8)
RAM 256 bytes
ADC Resolution 10 bits
Capacitive Touch Channels 8 channels
Serial Interfaces I2C, SPI, and UART
Supply Voltage Range 1.8 V to 3.6 V
Nominal Supply Voltage 2.5 V or 3.3 V
Plage de température de fonctionnement -40 °C to +85 °C
Boîtier 16-pin SOIC
Type de montage Surface mount
Programming Interface In-system programming

Guide de configuration des broches du C8051F825-GS 16-pin soic

Configuration des broches du C8051F825-GS (boîtier 16-pin soic). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 16-pin soic pour le C8051F825-GS

Aucune donnée de brochage détaillée disponible pour C8051F825-GS.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

C8051F825-GS convient pour 6 applications: Capacitive-Touch Control Panels, Temperature and Sensor Interface Controllers, Compact Motor and Relay Controllers, Battery-Powered Sensor Nodes, Industrial Communication Interfaces, Consumer Appliance User Interfaces.

🧩

Capacitive-Touch Control Panels

The C8051F825-GS fits compact control panels because its eight capacitive-touch channels can evaluate keys, sliders, or proximity electrodes while the 25 MHz 8051-compatible core handles debouncing, state logic, and communications. Its 10-bit ADC can also supervise panel voltage or temperature, and I2C or SPI can connect a display or indicator driver. The 16-pin SOIC keeps the design compact, although electrode layout, scan timing, and guard structures must follow the manufacturer’s guidance.

🏭

Temperature and Sensor Interface Controllers

For compact sensor interfaces, the C8051F825-GS provides a 10-bit ADC, 25 MHz processing speed, 8 KB of flash, and 256 bytes of RAM in a 16-pin package. It can sample analog sensors, apply calibration and threshold logic, and report results over UART, SPI, or I2C. Its -40 °C to +85 °C operating range supports industrial environments, while the 1.8 V to 3.6 V supply range accommodates low-voltage sensor nodes when the attached circuit is designed for the same rail.

🔧

Compact Motor and Relay Controllers

The C8051F825-GS can serve as the supervisory controller in a small motor, solenoid, or relay system because its 8051-compatible core provides deterministic control logic and its PWM-capable mixed-signal family architecture supports timing-based actuation. The UART and SPI interfaces allow external drivers or position sensors to be monitored, while the 10-bit ADC can supervise supply or current-related analog conditions. Its 16-pin SOIC package supports cost-sensitive control boards where a larger MCU would add unnecessary footprint.

⚡

Battery-Powered Sensor Nodes

The C8051F825-GS is suitable for small sensor nodes that combine local analog measurement, touch or button input, and low-speed data communication. Its 1.8 V to 3.6 V supply range permits operation from 1.8 V or 3.3 V system rails, and its 25 MHz clock provides headroom for protocol handling and local filtering. The 8 KB flash stores application firmware, while UART, SPI, and I2C support links to external sensing, storage, or communications components without requiring a larger package.

🌐

Industrial Communication Interfaces

For protocol bridges and industrial interface modules, the C8051F825-GS combines I2C, SPI, and UART in one device and provides 8 KB of flash for protocol code. The 25 MHz 8051-compatible core can execute framing, address handling, diagnostics, and configuration logic, while the 10-bit ADC can monitor an analog process input. The 16-pin SOIC footprint simplifies assembly, but isolation, surge protection, connector design, and grounding must be added according to the industrial interface requirements.

📱

Consumer Appliance User Interfaces

Récapitulatif des produits recommandés

C8051F825-GS Silicon Labs Utilisé dans : Capacitive-Touch Control Panels, Temperature and Sensor Interface Controllers, Compact Motor and Relay Controllers, Battery-Powered Sensor Nodes, Industrial Communication Interfaces, Consumer Appliance User Interfaces C8051F860-C-IS Related 16-pin mixed-signal MCU candidate Utilisé dans : Capacitive-Touch Control Panels, Temperature and Sensor Interface Controllers, Battery-Powered Sensor Nodes
What is the C8051F825-GS?
The C8051F825-GS is an 8-bit Silicon Labs mixed-signal microcontroller with a 25 MHz maximum clock, 8 KB of flash memory, 256 bytes of RAM, a 10-bit ADC, and eight capacitive-touch channels. According to the Silicon Labs C8051F82x datasheet, it combines an 8051-compatible CISC core with I2C, SPI, UART, flash programming, and capacitive-touch peripherals in a 16-pin SOIC package.
What are the key specifications of C8051F825-GS that engineers should know?
The C8051F825-GS combines a 25 MHz 8051-compatible core, 8 KB of flash memory, 256 bytes of RAM, a 10-bit ADC, eight capacitive-touch channels, and I2C, SPI, and UART interfaces. The Silicon Labs C8051F82x datasheet identifies a 1.8 V to 3.6 V supply range and a 16-pin SOIC package, making the device suitable for compact embedded controls requiring mixed-signal sensing and multiple serial interfaces.
Where can I download the C8051F825-GS datasheet PDF?
The C8051F825-GS datasheet PDF is available through the Silicon Labs C8051F82x documentation page and the C8051F825-GS document listing linked on this page. The document covers the 8051-compatible core, 25 MHz operating conditions, 8 KB flash memory, 256-byte RAM, 10-bit ADC, capacitive-touch block, I2C, SPI, UART, electrical characteristics, and package pin assignments.
Where can I find the C8051F825-GS pinout?
Use the pin-description and package-outline tables in the Silicon Labs C8051F82x datasheet to assign C8051F825-GS connections. The device uses a 16-pin SOIC package, but the available product record does not reproduce every pin name. Verify supply pins, ground, reset, programming signals, oscillator connections, and peripheral multiplexing against the current manufacturer document before fabrication.
Can C8051F825-GS be used for capacitive-touch user interfaces?
Yes, the C8051F825-GS includes an eight-channel capacitive-touch peripheral suitable for keys, sliders, or proximity controls. The Silicon Labs C8051F82x datasheet identifies the C8051F82x family as a mixed-signal Flash MCU family with capacitive-touch support. Actual sensing performance depends on the electrode geometry, guard-ring layout, scan configuration, firmware, and the application’s target environment.
What communication interfaces are available on C8051F825-GS?
The C8051F825-GS supports I2C, SPI, and UART serial communication. These interfaces allow the microcontroller to connect with sensors, display controllers, transceivers, and memory or data-capture devices. The Silicon Labs C8051F82x datasheet should be used to confirm the assigned pins, peripheral multiplexing, baud-rate or clock limits, and electrical timing before selecting connector or bus components.
What is the power supply voltage range of C8051F825-GS?
The C8051F825-GS operates from 1.8 V to 3.6 V, with 2.5 V and 3.3 V identified as nominal operating points in the device listing. The Silicon Labs C8051F82x datasheet provides the detailed input-voltage, output-voltage, and timing limits. Designers should ensure every attached peripheral and pull-up network remains compatible with the selected rail.
Is C8051F825-GS suitable for industrial control applications?
The C8051F825-GS is suitable for compact industrial controls requiring modest processing, serial communications, and analog or touch input. Its specified -40 °C to +85 °C temperature range, 10-bit ADC, 25 MHz clock, and three serial interfaces support applications such as sensor interfaces, panel controls, and equipment subcontrollers. For safety-critical production equipment, add the application-specific diagnostic and certification requirements beyond the MCU specifications.
Where can I buy C8051F825-GS online?
Use the “Request a Quote” form on this page to inquire about C8051F825-GS availability, minimum order quantity, and delivery. The form is the appropriate route for current commercial terms and production scheduling. Before ordering, confirm that the quoted item is the exact C8051F825-GS ordering code and 16-pin SOIC configuration rather than a different package, temperature grade, or reel designation.
What is the price of C8051F825-GS?
Current C8051F825-GS commercial terms are obtained through the “Request a Quote” form on this page. The form allows a buyer to request current pricing, quantity breaks, stock confirmation, and lead time for the exact MPN. Do not treat a generic starting-price reference as a binding quotation because component pricing and availability can change with order quantity and market conditions.
What is the lead time for C8051F825-GS?
The current lead time for C8051F825-GS should be requested through the “Request a Quote” form on this page. Provide the required quantity, target delivery date, and preferred packaging when submitting the inquiry. For scheduled production, include a forecast and buffer period in the request so manufacturing can confirm allocation without relying on an informal availability statement.
Is C8051F825-GS in stock?
Current C8051F825-GS stock status should be confirmed through the “Request a Quote” form on this page rather than inferred from an outdated listing. Submit the exact MPN, required quantity, and preferred shipping destination. A distributor search result may not represent live inventory, and a successful inquiry is the appropriate basis for committing a production schedule.
What is the difference between C8051F825-GS and C8051F860-C-IS?
The C8051F825-GS is built around the C8051F82x family and combines an 8051-compatible core with capacitive touch, flash memory, and mixed-signal resources. The C8051F860-C-IS appears in the same-package comparison material, but its functional characteristics and electrical ratings are not identical. Confirm pin multiplexing, memory, clock, analog resources, and programming configuration in the manufacturer documents before treating it as a replacement.
When should I choose C8051F825-GS over another 16-pin microcontroller?
Choose the C8051F825-GS when an existing design benefits from the C8051F82x feature set: a 25 MHz 8051-compatible core, 8 KB of flash, 256 bytes of RAM, a 10-bit ADC, eight capacitive-touch channels, and I2C, SPI, and UART in one 16-pin SOIC. Selection should also account for software compatibility, peripheral mapping, qualification requirements, and whether the alternative has enough memory and analog resources for the intended control task.
What can replace C8051F825-GS?
A valid replacement must match the 16-pin SOIC footprint, support the intended 1.8 V to 3.6 V supply range, provide comparable clock and memory resources, and preserve the required peripheral and programming behavior. The cross-reference record identifies the C8051F860-C-IS as a similar 16-SOIC candidate, but it does not establish every pin as identical. Run a complete datasheet comparison and firmware validation before substituting it.

Données de référence d'ingénierie pour C8051F825-GS — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the C8051F825-GS when a compact 16-pin control design benefits from a 25 MHz 8051-compatible core, 8 KB of flash, 256 bytes of RAM, a 10-bit ADC, eight capacitive-touch channels, and I2C, SPI, and UART. It is especially useful for touch controls, small sensor interfaces, appliance user interfaces, and industrial modules that need mixed-signal functions without a larger package. The C8051F860-C-IS may be considered when its resource set and complete pin mapping satisfy the design, but the shared SOIC outline alone does not prove drop-in compatibility. For an existing C8051F82x design, retaining the exact family member is generally the lowest-risk choice because firmware support, peripheral multiplexing, and startup behavior are already established. Reconsider other MCU families only if memory, analog performance, qualification, ecosystem, or long-term sourcing requirements justify a redesign and validation effort.

Comparaison avec les alternatives

Paramètre Ce produit C8051F860-C-IS
Package 16-SOIC 16-SOIC
Brand Silicon Labs Silicon Labs
Product Family C8051F82x Mixed Signal ISP Flash MCU C8051F860
CPU Architecture 8-bit 8051-compatible CISC 8-bit 8051-compatible CISC

Principaux différenciateurs

  • Integrated capacitive-touch sensing (vs C8051F860-C-IS)
  • Mixed-signal resources for compact controls (vs C8051F860-C-IS)
  • Low-voltage and industrial-temperature operation (vs C8051F860-C-IS)

Notes de conception

Route the C8051F825-GS power connections directly to the supply and ground pins with the decoupling capacitors placed close to the device. Keep analog inputs and touch-sensing traces away from switching nodes and high-current return paths. Because this is a mixed-signal MCU, stable reference and supply return paths are as important as the digital signal routing.

Use the manufacturer’s C8051F82x land pattern and pin-description tables when assigning the 16 SOIC pins. Verify oscillator connections, programming signals, reset behavior, and peripheral multiplexing before routing. Do not assume a similarly numbered pin on another C8051 device has the same function; even within one family, alternate peripheral mappings can change the electrical connection.

For I2C and SPI buses, select pull-ups and trace topology according to voltage, capacitance, and clock rate rather than the MCU clock rate alone. Keep communication traces away from the capacitive-touch electrodes where possible, and provide a quiet ground return. UART signals should also be checked for logic-level compatibility with the connected transceiver or module.

The common mistake when comparing C8051F82x devices is treating the package and clock rate as sufficient proof of interchangeability. Before replacing the C8051F825-GS, verify memory capacity, ADC channels, capacitive-touch resources, serial-pin multiplexing, supply limits, oscillator requirements, and programming behavior. Existing firmware may require device-definition and startup-code changes even when the mechanical footprint is unchanged.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance attributes were not explicitly identified in the product records. AEC-Q100 is recorded as not applicable because this is an industrial/consumer mixed-signal MCU rather than an automotive-qualified part.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

C8051F825-GS datasheet C8051F825-GS pinout C8051F825-GS datasheet pdf C8051F825-GS equivalent C8051F825-GS replacement C8051F825-GS cross reference C8051F825-GS vs C8051F860-C-IS C8051F825-GS footprint C8051F825-GS price C8051F825-GS stock Silicon Labs C8051F825-GS C8051F825 16 pin SOIC C8051F825 capacitive touch C8051F825 application circuit

Composants & termes associés

Silicon Labs C8051F825-GS C8051F860-C-IS C8051F82x 8051-compatible core 8-bit microcontroller CISC processor mixed-signal MCU In-system programming Flash memory 10-bit ADC capacitive touch I2C SPI UART 16-pin SOIC SOIC package family surface-mount technology industrial control sensor interface consumer appliance control operating voltage operating temperature Silicon Labs C8051F82x datasheet
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ