C8051F825-GS - 25MHz 8051 MCU with 8KB Flash | Silicon Labs
부품 번호: C8051F825-GS ✓ 활성C8051F825-GS 개요
An 8-bit microcontroller is a compact embedded-control component that executes firmware to monitor inputs, operate actuators, and manage communications. The C8051F825-GS belongs to the Mixed Signal ISP Flash MCU family, placing an 8051-compatible core, flash program memory, analog conversion, and capacitive-touch sensing within one device. This integration reduces external component count in compact industrial, consumer, and interface-control products.
Principal features include a 25 MHz maximum clock, 8 KB of flash memory organized as 8K x 8, 256 bytes of RAM, a 10-bit ADC, and eight capacitive-touch channels. The device supports I2C, SPI, and UART communication interfaces and operates across a 1.8 V to 3.6 V supply range. Its 16-pin SOIC package is suitable for conventional surface-mount assembly where a larger QFN package would be unnecessary.
The C8051F82x architecture combines deterministic 8051-compatible instruction execution with dedicated mixed-signal and communication peripherals. Flash memory permits field programming and firmware updates, while on-chip RAM supports working variables, stack operations, and communication buffers. The 10-bit ADC provides sufficient resolution for common control tasks, and capacitive-touch sensing allows direct user-interface keys or proximity elements to be implemented without separate switch devices.
Typical uses include compact temperature controllers, capacitive-panel user interfaces, low-cost sensor nodes, motor and relay controllers, industrial interface modules, and connected consumer accessories. The combination of I2C, SPI, and UART allows the MCU to communicate with sensors, displays, transceivers, and data-storage components while retaining a small 16-pin footprint.
PCB design should preserve the decoupling and exposed-pad requirements specified for the selected package, although the 16-pin SOIC does not use a bottom thermal pad. Keep the oscillator and sensitive analog inputs away from high-current switching paths, and follow the manufacturer’s recommended capacitor values and grounding arrangement. Confirm the exact peripheral assignments and startup behavior in the C8051F82x datasheet before releasing the PCB.
This product page consolidates the verified device characteristics, sourcing guidance, drop-in replacement limits, and practical design considerations needed to evaluate the C8051F825-GS. It also highlights where same-package devices differ in memory, analog resources, touch channels, or programming configuration, helping engineers distinguish a true replacement from a merely similar microcontroller.
드롭인 대체품: C8051F825-GS — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
C8051F860-C-IS
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F825-GS 최대 정격 & 전기적 특성
| Product Type | 8-bit mixed-signal flash microcontroller |
| Core Architecture | 8051-compatible CISC |
| Series | C8051F82x |
| 최대 클록 주파수 | 25 MHz |
| Flash Memory | 8 KB (8K x 8) |
| RAM | 256 bytes |
| ADC Resolution | 10 bits |
| Capacitive Touch Channels | 8 channels |
| Serial Interfaces | I2C, SPI, and UART |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Nominal Supply Voltage | 2.5 V or 3.3 V |
| 동작 온도 범위 | -40 °C to +85 °C |
| 패키지 | 16-pin SOIC |
| 실장 유형 | Surface mount |
| Programming Interface | In-system programming |
C8051F825-GS 16-pin soic 핀 구성 가이드
C8051F825-GS(16-pin soic 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: C8051F825-GS.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
C8051F825-GS 적합 용도: 6 애플리케이션s: Capacitive-Touch Control Panels, Temperature and Sensor Interface Controllers, Compact Motor and Relay Controllers, Battery-Powered Sensor Nodes, Industrial Communication Interfaces, Consumer Appliance User Interfaces.
Capacitive-Touch Control Panels
The C8051F825-GS fits compact control panels because its eight capacitive-touch channels can evaluate keys, sliders, or proximity electrodes while the 25 MHz 8051-compatible core handles debouncing, state logic, and communications. Its 10-bit ADC can also supervise panel voltage or temperature, and I2C or SPI can connect a display or indicator driver. The 16-pin SOIC keeps the design compact, although electrode layout, scan timing, and guard structures must follow the manufacturer’s guidance.
추천
Temperature and Sensor Interface Controllers
For compact sensor interfaces, the C8051F825-GS provides a 10-bit ADC, 25 MHz processing speed, 8 KB of flash, and 256 bytes of RAM in a 16-pin package. It can sample analog sensors, apply calibration and threshold logic, and report results over UART, SPI, or I2C. Its -40 °C to +85 °C operating range supports industrial environments, while the 1.8 V to 3.6 V supply range accommodates low-voltage sensor nodes when the attached circuit is designed for the same rail.
추천
Compact Motor and Relay Controllers
The C8051F825-GS can serve as the supervisory controller in a small motor, solenoid, or relay system because its 8051-compatible core provides deterministic control logic and its PWM-capable mixed-signal family architecture supports timing-based actuation. The UART and SPI interfaces allow external drivers or position sensors to be monitored, while the 10-bit ADC can supervise supply or current-related analog conditions. Its 16-pin SOIC package supports cost-sensitive control boards where a larger MCU would add unnecessary footprint.
추천
Battery-Powered Sensor Nodes
The C8051F825-GS is suitable for small sensor nodes that combine local analog measurement, touch or button input, and low-speed data communication. Its 1.8 V to 3.6 V supply range permits operation from 1.8 V or 3.3 V system rails, and its 25 MHz clock provides headroom for protocol handling and local filtering. The 8 KB flash stores application firmware, while UART, SPI, and I2C support links to external sensing, storage, or communications components without requiring a larger package.
추천
Industrial Communication Interfaces
For protocol bridges and industrial interface modules, the C8051F825-GS combines I2C, SPI, and UART in one device and provides 8 KB of flash for protocol code. The 25 MHz 8051-compatible core can execute framing, address handling, diagnostics, and configuration logic, while the 10-bit ADC can monitor an analog process input. The 16-pin SOIC footprint simplifies assembly, but isolation, surge protection, connector design, and grounding must be added according to the industrial interface requirements.
추천
Consumer Appliance User Interfaces
추천
추천 제품 요약
엔지니어링 참조 데이터: C8051F825-GS — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | C8051F860-C-IS |
|---|---|---|
| Package | 16-SOIC | 16-SOIC |
| Brand | Silicon Labs | Silicon Labs |
| Product Family | C8051F82x Mixed Signal ISP Flash MCU | C8051F860 |
| CPU Architecture | 8-bit 8051-compatible CISC | 8-bit 8051-compatible CISC |
주요 차별점
- Integrated capacitive-touch sensing (vs C8051F860-C-IS)
- Mixed-signal resources for compact controls (vs C8051F860-C-IS)
- Low-voltage and industrial-temperature operation (vs C8051F860-C-IS)
설계 노트
Route the C8051F825-GS power connections directly to the supply and ground pins with the decoupling capacitors placed close to the device. Keep analog inputs and touch-sensing traces away from switching nodes and high-current return paths. Because this is a mixed-signal MCU, stable reference and supply return paths are as important as the digital signal routing.
Use the manufacturer’s C8051F82x land pattern and pin-description tables when assigning the 16 SOIC pins. Verify oscillator connections, programming signals, reset behavior, and peripheral multiplexing before routing. Do not assume a similarly numbered pin on another C8051 device has the same function; even within one family, alternate peripheral mappings can change the electrical connection.
For I2C and SPI buses, select pull-ups and trace topology according to voltage, capacitance, and clock rate rather than the MCU clock rate alone. Keep communication traces away from the capacitive-touch electrodes where possible, and provide a quiet ground return. UART signals should also be checked for logic-level compatibility with the connected transceiver or module.
The common mistake when comparing C8051F82x devices is treating the package and clock rate as sufficient proof of interchangeability. Before replacing the C8051F825-GS, verify memory capacity, ADC channels, capacitive-touch resources, serial-pin multiplexing, supply limits, oscillator requirements, and programming behavior. Existing firmware may require device-definition and startup-code changes even when the mechanical footprint is unchanged.
규정 준수 정보
Compliance attributes were not explicitly identified in the product records. AEC-Q100 is recorded as not applicable because this is an industrial/consumer mixed-signal MCU rather than an automotive-qualified part.