CD4040BD3 - 12-Bit CMOS Counter | Texas Instruments | Logic
Référence : CD4040BD3 ✓ ActifCD4040BD3 Présentation
A binary counter is a sequential logic device that increments its internal count when triggered by an active clock edge. The CD4040 family belongs to the CD4000 CMOS logic series, combining binary counter and frequency-divider functions in one package. Its 12 output stages can divide an input clock by binary-weighted ratios from 2 through 4096, allowing useful clock-rate reduction without arranging multiple separate divider packages.
The principal operating characteristics are a 3 V to 18 V supply, negative-edge triggering, and a maximum count rate of 24 MHz. The wide supply range supports operation across common CMOS voltage levels, while the extended -55 °C to +125 °C temperature range suits industrial and temperature-demanding equipment. The counter architecture provides one divide-by-2 output and additional binary-weighted output stages for cascaded timing or sequencing functions.
The ripple-carry implementation advances one binary stage per clock transition. Its clock input can therefore be driven from another counter or timing circuit, while the Q0 through Q9 and Q8 through Q11 outputs expose intermediate count states. In a feedback arrangement, a selected output can clock the same device to implement longer divide ratios or repeating intervals. Designers should account for cumulative propagation delay across the cascaded stages when operating near the stated count-rate limit.
Typical applications include digital frequency division, pulse and event counting, programmable timers, industrial sequencers, clock-period generation, and repetitive pulse-rate measurement. The device is particularly useful when a system needs multiple related divide ratios from one clock or when a binary count must be observed directly by downstream logic.
For reliable implementation, follow the manufacturer datasheet for the reset, set, clock, supply, and unused-pin connections. Keep clock traces short and decouple the supply close to the device, because long feedback paths and switching edges can increase transition-time errors in a ripple-counter design.
This page combines the device architecture, operating limits, verified source listings, practical application guidance, and same-footprint replacement information to support component selection and PCB-level design decisions.
Alternatives de remplacement direct pour CD4040BD3 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec CD4040BD3 (même facteur de forme et même empreinte) — différant par Package, Mounting Type, Logic Family, Counter Type, RoHS Status.
CD4040BD
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC14040BD
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →HEF4040B
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CD4040BCM
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →CD4040BD3 Valeurs maximales et caractéristiques électriques
| Product Type | 12-bit CMOS ripple-carry binary counter and divider |
| Logic Family | CD4000B CMOS series |
| Supply Voltage Range | 3 V to 18 V |
| Plage de température de fonctionnement | -55 °C to +125 °C |
| Count Rate | 24 MHz maximum |
| Clock Trigger Type | Negative-edge triggered |
| Counter Width | 12 bit |
| Counting Direction | Up |
| Counter Architecture | Asynchronous ripple-carry binary counter |
| Number of Binary Outputs | 12 outputs |
| Boîtier | 16-pin CDIP |
| Type de montage | Through-hole |
| Operating Voltage | 3 V to 18 V |
| Statut RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Configuration des broches de CD4040BD3
| Broche 1 | CLK — Clock input with negative-edge triggering |
| Broche 2 | MR — Master reset input |
| Broche 3 | Q0 — Divide-by-2 output |
| Broche 4 | Q1 — Binary counter output |
| Broche 5 | Q2 — Binary counter output |
| Broche 6 | Q3 — Binary counter output |
| Broche 7 | Q4 — Binary counter output |
| Broche 8 | VSS — Ground reference |
| Broche 9 | Q8 — Binary counter output |
| Broche 10 | Q7 — Binary counter output |
| Broche 11 | Q6 — Binary counter output |
| Broche 12 | Q5 — Binary counter output |
| Broche 13 | Q9 — Binary counter output |
| Broche 14 | SET — Counter preset input |
| Broche 15 | VDD — Positive supply terminal |
| Broche 16 | NC — Not connected |
Applications typiques
CD4040BD3 convient pour 6 applications: Digital Frequency Division, Industrial Event Counting, Programmable Timer and Sequencer, Pulse Repetition and Rate Reduction, Clock Period Generation, Test and Measurement Timing.
Digital Frequency Division
The CD4040BD3 is suitable for dividing a periodic clock into lower-frequency signals because its 12 binary stages provide divide-by-2 through divide-by-4096 ratios. The counter advances on the falling clock edge and can feed a selected output back to the clock input to establish a repeating divided frequency. With a 3 V to 18 V supply range and a 24 MHz maximum count rate, it fits low-to-medium-frequency CMOS timing systems. Designers should verify cumulative ripple delay and clock edge quality at the intended frequency because the internal stages advance sequentially.
Recommandé
Industrial Event Counting
The CD4040BD3 can count discrete events represented as falling-edge clock pulses and expose the resulting count through 12 binary outputs. Its -55 °C to +125 °C temperature specification supports equipment operating across a broad industrial temperature range. The asynchronous ripple architecture is practical when moderate counting frequency and direct observation of multiple binary bits are required. For high-speed events or long trace routing, check propagation delay and use short, well-controlled clock paths to prevent timing errors.
Recommandé
Programmable Timer and Sequencer
The 12 visible count states of the CD4040BD3 make it useful for generating repeatable timing intervals or advancing a sequencer through binary-coded stages. A downstream controller can decode selected Q outputs and use them to enable or disable external functions. Operating from 3 V to 18 V allows integration with compatible CMOS control logic, while the 16-pin CDIP package simplifies through-hole assembly and prototype work. Reset and set inputs must be constrained to defined states to prevent accidental count initialization or preset operation.
Recommandé
Pulse Repetition and Rate Reduction
The CD4040BD3 can reduce a fast repetitive pulse train to a lower clock used by slower logic, instrumentation, or actuator controls. The negative-edge trigger and 12 weighted outputs permit selection of different division ratios without cascading several separate counters. Its 24 MHz count-rate rating provides a defined upper operating point, but designers should preserve edge sharpness and avoid routing the feedback path through long PCB traces. The wide supply range also supports division in systems using several compatible CMOS voltage levels.
Recommandé
Clock Period Generation
The CD4040BD3 can divide a stable reference clock to create a longer periodic timing signal for housekeeping, sampling, or control functions. Multiple binary outputs allow several related rates to be selected without duplicating the divider chain, which simplifies system partitioning. The device operates from 3 V to 18 V and retains operation across the stated -55 °C to +125 °C range. Accurate period generation depends on the reference clock's stability and on keeping feedback routing short enough to limit cumulative propagation error.
Recommandé
Test and Measurement Timing
The CD4040BD3 is useful in test and measurement equipment that must reduce, count, or distribute clock pulses across multiple channels. Its 12 binary outputs provide observable intermediate states for diagnostics, while the falling-edge trigger permits direct use of several timing waveforms. The 3 V to 18 V supply range supports integration with compatible low-voltage CMOS instrumentation. Before using it in precision timing, verify propagation-delay variation, clock jitter, and the output delay of the particular feedback divider implementation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour CD4040BD3 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | CD4040BD | MC14040B | HEF4040B | CD4040BC |
|---|---|---|---|---|---|
| Package | CDIP-16 | CDIP-16 | DIP-16 | DIP-16 | DIP-16 |
| Brand | Texas Instruments | Texas Instruments | Motorola | Nexperia | Fairchild Semiconductor |
| Counter Width | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Supply Voltage Range | 3 V to 18 V | 3 V to 18 V class; exact suffix specification requires confirmation | 3 V to 18 V class; exact limits require manufacturer confirmation | 3 V to 18 V class; exact limits require manufacturer confirmation | 3 V to 18 V class; exact limits require manufacturer confirmation |
| Clock Trigger | Negative-edge triggered | Negative-edge triggered | Negative-edge triggered | Negative-edge triggered | Negative-edge triggered |
| Counter Architecture | Asynchronous ripple-carry binary counter | Asynchronous ripple-carry binary counter | Asynchronous ripple-carry binary counter | Asynchronous ripple-carry binary counter | Asynchronous ripple-carry binary counter |
| Binary Outputs | 12 outputs | 12 outputs | 12 outputs | 12 outputs | 12 outputs |
| Special Features | Master reset and preset inputs | Master reset and preset inputs | Master reset and preset inputs | Master reset and preset inputs | Master reset and preset inputs |
Principaux différenciateurs
- Twelve binary outputs expose multiple divider ratios from one counter (vs SN74LS90DR)
- Supports a wide 3 V to 18 V operating range (vs MC14040B)
- Negative-edge operation enables direct feedback frequency division (vs CD4040BD)
- Through-hole CDIP-16 construction supports prototype and repair assembly (vs HEF4040B)
Notes de conception
Keep the clock trace short and preserve a clean negative transition because the CD4040BD3 advances on the falling edge. In a feedback divider, route the selected Q output back to CLK without unnecessary test pads, long branches, or abrupt impedance changes. Because the counter is ripple-based, propagation delay accumulates from stage to stage; verify the complete feedback path against the 24 MHz count-rate rating rather than relying only on clock-edge rise time.
Place the supply bypass capacitor close to the VDD and VSS pins and use the manufacturer-recommended connection topology. The supported 3 V to 18 V range permits operation across several CMOS supply levels, but switching thresholds and timing margin can change with VDD. Do not treat the minimum supply voltage as a substitute for confirming that every downstream CMOS device has compatible input thresholds and noise margins at the selected operating voltage.
Do not leave the master-reset or preset input floating because an undefined control level can initialize the count incorrectly. Drive each control from a defined CMOS state and ensure that reset and preset are not asserted simultaneously unless the intended operation is explicitly permitted. Also avoid treating the Q outputs as independently buffered clock outputs when driving multiple loads, because their drive capability and transition timing must satisfy the connected circuit.
Route the 16-pin CDIP footprint according to the exact alternative datasheet rather than relying only on the general DIP outline. Confirm whether a chosen substitute uses the same row spacing, pin numbering, and optional exposed connections. Keep clock and feedback nets away from noisy analog or power-converter routes, and provide a stable ground reference to minimize switching noise induced on the counter outputs.
Informations de conformité
The CD4040BD3 is a through-hole CMOS logic IC; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited component information.