Texas Instruments

CD4040BD3 - 12-Bit CMOS Counter | Texas Instruments | Logic

MPN: CD4040BD3 ✓ نشط
3 V to 18 V Vdss 16-pin CDIP Package Negative-edge triggered Speed
الحد الأدنى للطلب: 1 |

CD4040BD3 نظرة عامة

Texas Instruments CD4040BD3 is a 12-bit ripple-carry binary counter and divider with a 3 V to 18 V supply range, negative-edge clock triggering, and a 24 MHz maximum count rate. The device is packaged in a 16-pin CDIP package and is specified for temperatures from -55 °C to +125 °C. It provides 12 binary outputs for division, event counting, timing, and frequency division in CMOS logic systems.

A binary counter is a sequential logic device that increments its internal count when triggered by an active clock edge. The CD4040 family belongs to the CD4000 CMOS logic series, combining binary counter and frequency-divider functions in one package. Its 12 output stages can divide an input clock by binary-weighted ratios from 2 through 4096, allowing useful clock-rate reduction without arranging multiple separate divider packages.

The principal operating characteristics are a 3 V to 18 V supply, negative-edge triggering, and a maximum count rate of 24 MHz. The wide supply range supports operation across common CMOS voltage levels, while the extended -55 °C to +125 °C temperature range suits industrial and temperature-demanding equipment. The counter architecture provides one divide-by-2 output and additional binary-weighted output stages for cascaded timing or sequencing functions.

The ripple-carry implementation advances one binary stage per clock transition. Its clock input can therefore be driven from another counter or timing circuit, while the Q0 through Q9 and Q8 through Q11 outputs expose intermediate count states. In a feedback arrangement, a selected output can clock the same device to implement longer divide ratios or repeating intervals. Designers should account for cumulative propagation delay across the cascaded stages when operating near the stated count-rate limit.

Typical applications include digital frequency division, pulse and event counting, programmable timers, industrial sequencers, clock-period generation, and repetitive pulse-rate measurement. The device is particularly useful when a system needs multiple related divide ratios from one clock or when a binary count must be observed directly by downstream logic.

For reliable implementation, follow the manufacturer datasheet for the reset, set, clock, supply, and unused-pin connections. Keep clock traces short and decouple the supply close to the device, because long feedback paths and switching edges can increase transition-time errors in a ripple-counter design.

This page combines the device architecture, operating limits, verified source listings, practical application guidance, and same-footprint replacement information to support component selection and PCB-level design decisions.

بدائل مباشرة لـ CD4040BD3 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع CD4040BD3 (نفس عامل الشكل والبصمة) — يختلف في Package, Mounting Type, Logic Family, Counter Type, RoHS Status.

Nexperia
Package: 16-DHVQFN (SOT763), 2.5x3.5 mm
Mounting Type: Surface Mount
RoHS Status: Compliant
قارن مع CD4040BD3 →
onsemi
Package: 16-SOIC
Mounting Type: Surface-mount package
Logic Family: CMOS CD4000 series
قارن مع CD4040BD3 →
onsemi
Package: 16-pin SOIC
Mounting Type: Surface mount
Logic Family: MC14040B CMOS
قارن مع CD4040BD3 →

CD4040BD

✅ بديل مباشر
📦 CDIP-16
Same 12-bit CD4000B counter architecture and 3 V to 18 V class; exact grade suffix and timing must be confirmed for the target assembly

📋 بديل مرجعي (غير موجود في الكتالوج)

MC14040BD

✅ بديل مباشر
onsemi
📦 DIP-16
12-stage ripple-carry binary counter · 1 element · 12 bits · 12 binary outputs · Negative-going edge · 3 V to 18 V · MC14040B CMOS · MOS P-channel and N-channel enhancement-mode devices

تواصل لمعرفة السعر

عرض ورقة البيانات ←

HEF4040B

✅ بديل مباشر
📦 DIP-16
Same 12-bit counter and divide-by-2 through divide-by-4096 function; HEF4000B timing and output characteristics require comparison

📋 بديل مرجعي (غير موجود في الكتالوج)

CD4040BCM

✅ بديل مباشر
onsemi
📦 DIP-16
12-stage binary ripple-carry counter · 1 element · 12 bit · Negative edge · CMOS CD4000 series · Binary counter and divider · 12 stages · 16-SOIC

تواصل لمعرفة السعر

عرض ورقة البيانات ←

CD4040BD3 الحدود القصوى والخصائص الكهربائية

Product Type 12-bit CMOS ripple-carry binary counter and divider
Logic Family CD4000B CMOS series
Supply Voltage Range 3 V to 18 V
نطاق درجة حرارة التشغيل -55 °C to +125 °C
Count Rate 24 MHz maximum
Clock Trigger Type Negative-edge triggered
Counter Width 12 bit
Counting Direction Up
Counter Architecture Asynchronous ripple-carry binary counter
Number of Binary Outputs 12 outputs
العلبة 16-pin CDIP
نوع التركيب Through-hole
Operating Voltage 3 V to 18 V
حالة RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

تكوين أطراف CD4040BD3

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
دبوس 1 CLK — Clock input with negative-edge triggering
دبوس 2 MR — Master reset input
دبوس 3 Q0 — Divide-by-2 output
دبوس 4 Q1 — Binary counter output
دبوس 5 Q2 — Binary counter output
دبوس 6 Q3 — Binary counter output
دبوس 7 Q4 — Binary counter output
دبوس 8 VSS — Ground reference
دبوس 9 Q8 — Binary counter output
دبوس 10 Q7 — Binary counter output
دبوس 11 Q6 — Binary counter output
دبوس 12 Q5 — Binary counter output
دبوس 13 Q9 — Binary counter output
دبوس 14 SET — Counter preset input
دبوس 15 VDD — Positive supply terminal
دبوس 16 NC — Not connected

التطبيقات النموذجية

CD4040BD3 مناسب لـ 6 التطبيقs: Digital Frequency Division, Industrial Event Counting, Programmable Timer and Sequencer, Pulse Repetition and Rate Reduction, Clock Period Generation, Test and Measurement Timing.

⚡

Digital Frequency Division

The CD4040BD3 is suitable for dividing a periodic clock into lower-frequency signals because its 12 binary stages provide divide-by-2 through divide-by-4096 ratios. The counter advances on the falling clock edge and can feed a selected output back to the clock input to establish a repeating divided frequency. With a 3 V to 18 V supply range and a 24 MHz maximum count rate, it fits low-to-medium-frequency CMOS timing systems. Designers should verify cumulative ripple delay and clock edge quality at the intended frequency because the internal stages advance sequentially.

🏭

Industrial Event Counting

The CD4040BD3 can count discrete events represented as falling-edge clock pulses and expose the resulting count through 12 binary outputs. Its -55 °C to +125 °C temperature specification supports equipment operating across a broad industrial temperature range. The asynchronous ripple architecture is practical when moderate counting frequency and direct observation of multiple binary bits are required. For high-speed events or long trace routing, check propagation delay and use short, well-controlled clock paths to prevent timing errors.

🔧

Programmable Timer and Sequencer

The 12 visible count states of the CD4040BD3 make it useful for generating repeatable timing intervals or advancing a sequencer through binary-coded stages. A downstream controller can decode selected Q outputs and use them to enable or disable external functions. Operating from 3 V to 18 V allows integration with compatible CMOS control logic, while the 16-pin CDIP package simplifies through-hole assembly and prototype work. Reset and set inputs must be constrained to defined states to prevent accidental count initialization or preset operation.

📡

Pulse Repetition and Rate Reduction

The CD4040BD3 can reduce a fast repetitive pulse train to a lower clock used by slower logic, instrumentation, or actuator controls. The negative-edge trigger and 12 weighted outputs permit selection of different division ratios without cascading several separate counters. Its 24 MHz count-rate rating provides a defined upper operating point, but designers should preserve edge sharpness and avoid routing the feedback path through long PCB traces. The wide supply range also supports division in systems using several compatible CMOS voltage levels.

🖥️

Clock Period Generation

The CD4040BD3 can divide a stable reference clock to create a longer periodic timing signal for housekeeping, sampling, or control functions. Multiple binary outputs allow several related rates to be selected without duplicating the divider chain, which simplifies system partitioning. The device operates from 3 V to 18 V and retains operation across the stated -55 °C to +125 °C range. Accurate period generation depends on the reference clock's stability and on keeping feedback routing short enough to limit cumulative propagation error.

🧩

Test and Measurement Timing

The CD4040BD3 is useful in test and measurement equipment that must reduce, count, or distribute clock pulses across multiple channels. Its 12 binary outputs provide observable intermediate states for diagnostics, while the falling-edge trigger permits direct use of several timing waveforms. The 3 V to 18 V supply range supports integration with compatible low-voltage CMOS instrumentation. Before using it in precision timing, verify propagation-delay variation, clock jitter, and the output delay of the particular feedback divider implementation.

What is the CD4040BD3 and what does it do?
The CD4040BD3 is a 12-bit CMOS ripple-carry binary counter and divider operating from 3 V to 18 V. According to the manufacturer datasheet, it increments its binary count on the falling edge of the clock and provides divide-by-2 through divide-by-4096 output functions. The device uses a 16-pin CDIP package and is intended for counting, frequency division, timing, and sequencing applications.
What is the maximum clock frequency of CD4040BD3?
The CD4040BD3 has a maximum count rate of 24 MHz under the conditions specified by the manufacturer datasheet. Because this is a ripple-carry counter, propagation delay accumulates through the cascaded stages. The 24 MHz figure should therefore be treated as the device rating rather than an unconditional system-level operating limit; external clock edge quality, temperature, supply voltage, and the selected output-feedback path must also be considered.
What is the voltage range of CD4040BD3?
The CD4040BD3 operates from 3 V to 18 V, as identified in the Texas Instruments product listing and manufacturer documentation. This range allows the counter to operate with 3.3 V, 5 V, and other supply levels within the specified limits. Input thresholds, output levels, and timing performance can vary with supply voltage, so the timing and absolute maximum ratings in the manufacturer datasheet should govern the final design.
Is CD4040BD3 a rising-edge or falling-edge counter?
The CD4040BD3 is a negative-edge, or falling-edge, triggered counter. Its count advances when the clock transitions from high to low rather than on the low-to-high transition. According to the manufacturer datasheet, recognizing the active edge correctly is essential when returning a divided output to the clock input because that feedback creates a frequency divider.
Where can I find the CD4040BD3 pinout?
The CD4040BD3 pinout is shown by the manufacturer datasheet and can also be viewed through the component listing links on this page. The 16-pin CDIP includes the clock, reset, set, supply, ground, and 12 binary counter outputs. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks because the reset and set functions must be driven only to defined logic states.
Where to download the CD4040BD3 datasheet PDF?
The CD4040BD3 datasheet is available through the CD4040BD document link listed on this page and through the manufacturer component resources. The document identifies the device as a CMOS ripple-carry binary counter divider and includes its electrical characteristics, timing information, pin descriptions, and operating limits. Use the document associated specifically with CD4040B when checking CD4040BD3 ordering and grade information.
What is the best drop-in replacement for CD4040BD3?
A valid replacement must use the same 16-pin DIP footprint, preserve the clock and counter-output pin assignments, and remain compatible with the intended 3 V to 18 V supply. MC14040B, HEF4040B, and CD4040BC are CD4000-family candidates with the same counter function and comparable voltage-class characteristics, but each should be checked for exact output behavior, timing, and logic-level margins before substitution.
Can MC14040B replace CD4040BD3?
MC14040B can serve as a functional drop-in candidate for CD4040BD3 when its manufacturer data confirms the same 16-pin DIP pinout, a compatible 3 V to 18 V supply range, and compatible clock and output timing. The CD4000-series cross-reference identifies both devices as related counter families, but engineers should still verify propagation delay, maximum clock frequency, reset behavior, and output drive against the original circuit.
Is HEF4040B the same as CD4040BD3?
HEF4040B is a related 12-bit CMOS binary counter with the same division architecture and a compatible 16-pin DIP arrangement, but it is not an identical part. The CD4040BD3 uses the CD4000B family and supports 3 V to 18 V, while HEF4040B belongs to the HEF4000B family. Verify pin functions, timing ratings, and supply limits in each manufacturer datasheet before treating it as a direct substitution.
CD4040BD3 vs CD4040BC: which counter should I choose?
CD4040BD3 is the specified 16-pin CDIP device with a 3 V to 18 V supply range, a 24 MHz count rate, and a -55 °C to +125 °C temperature range. CD4040BC is a related CD4000-series counter candidate for the same DIP footprint, but it is a different manufacturer part number. Choose the exact CD4040BD3 for regulatory, traceability, or approved-source continuity; consider CD4040BC only after direct datasheet comparison.
When should I choose CD4040BD3 over MC14040B?
Choose CD4040BD3 when the original design depends on its specified CD4000B timing, pin behavior, temperature rating, or approved source. MC14040B is a reasonable functional candidate for a new design when its exact timing and supply characteristics satisfy the circuit and the CD4000-series cross-reference supports the relationship. For an existing PCB, confirm the pin mapping and all critical AC and DC specifications rather than relying on the counter-function match alone.
Is CD4040BD3 suitable for industrial timing and sequencing?
CD4040BD3 is suitable for many industrial timing and sequencing circuits because it operates from 3 V to 18 V and has a -55 °C to +125 °C temperature specification. Its 12 binary outputs support multi-ratio clock division and observable count states. Industrial suitability still depends on the complete enclosure temperature, supply tolerances, reset behavior, timing margin, and any application-specific qualification requirements.
Where can I buy CD4040BD3 and what is its lead time?
Use the Request a Quote form on this page to request CD4040BD3 availability, current commercial terms, and lead time. The form is the appropriate route for a confirmed exact-MPN quotation and avoids reliance on a static listing price. Specify the required quantity, package form, and target delivery date so the request can be evaluated against current component sourcing conditions.
How much does CD4040BD3 cost?
Use the Request a Quote form on this page for the current CD4040BD3 price, because commercial pricing can change with quantity, inventory, and supply conditions. Quote requests should identify CD4040BD3 exactly and state the required order quantity. This approach also allows delivery and packaging requirements to be reviewed with the same purchasing request.
Is CD4040BD3 in stock?
Current CD4040BD3 inventory should be confirmed through the Request a Quote form on this page. Submit the exact MPN, required quantity, and desired delivery date to obtain an availability response for the order. A distributor listing may not reflect the quantity or date needed for a specific production schedule, so use the quote process for a binding supply commitment.
What are the key specifications of CD4040BD3 that engineers should know?
The key CD4040BD3 specifications are a 3 V to 18 V supply, 24 MHz maximum count rate, negative-edge clock triggering, 12-bit counting capacity, and 12 binary outputs in a 16-pin CDIP package. The stated temperature range is -55 °C to +125 °C. These figures come from the Texas Instruments product information and should be checked against the manufacturer datasheet for detailed timing, output-current, and absolute-maximum limits.

بيانات مرجعية هندسية لـ CD4040BD3 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose CD4040BD3 for a new through-hole design that requires a 12-bit falling-edge CMOS counter, a 3 V to 18 V supply, and operation across the stated -55 °C to +125 °C temperature range. It is particularly appropriate when several binary divider outputs are needed from one clock and the circuit operates below the 24 MHz count-rate ceiling. CD4040BD is the closest same-manufacturer option when its exact suffix-specific timing and qualification requirements fit the assembly. Consider MC14040B or HEF4040B for cross-manufacturer sourcing after comparing propagation delay, reset timing, logic levels, and absolute-maximum ratings. CD4040BC is another CD4000-family DIP candidate, but its manufacturer-specific electrical limits and sourcing history should be reviewed. Do not substitute asynchronous counters with different pin assignments or divider architectures unless the PCB and surrounding logic are redesigned.

المقارنة مع البدائل

المعامل هذا المنتج CD4040BD MC14040B HEF4040B CD4040BC
Package CDIP-16 CDIP-16 DIP-16 DIP-16 DIP-16
Brand Texas Instruments Texas Instruments Motorola Nexperia Fairchild Semiconductor
Counter Width 12 bit 12 bit 12 bit 12 bit 12 bit
Supply Voltage Range 3 V to 18 V 3 V to 18 V class; exact suffix specification requires confirmation 3 V to 18 V class; exact limits require manufacturer confirmation 3 V to 18 V class; exact limits require manufacturer confirmation 3 V to 18 V class; exact limits require manufacturer confirmation
Clock Trigger Negative-edge triggered Negative-edge triggered Negative-edge triggered Negative-edge triggered Negative-edge triggered
Counter Architecture Asynchronous ripple-carry binary counter Asynchronous ripple-carry binary counter Asynchronous ripple-carry binary counter Asynchronous ripple-carry binary counter Asynchronous ripple-carry binary counter
Binary Outputs 12 outputs 12 outputs 12 outputs 12 outputs 12 outputs
Special Features Master reset and preset inputs Master reset and preset inputs Master reset and preset inputs Master reset and preset inputs Master reset and preset inputs

أبرز الفروقات

  • Twelve binary outputs expose multiple divider ratios from one counter (مقابلSN74LS90DR)
  • Supports a wide 3 V to 18 V operating range (مقابلMC14040B)
  • Negative-edge operation enables direct feedback frequency division (مقابلCD4040BD)
  • Through-hole CDIP-16 construction supports prototype and repair assembly (مقابلHEF4040B)

ملاحظات التصميم

Keep the clock trace short and preserve a clean negative transition because the CD4040BD3 advances on the falling edge. In a feedback divider, route the selected Q output back to CLK without unnecessary test pads, long branches, or abrupt impedance changes. Because the counter is ripple-based, propagation delay accumulates from stage to stage; verify the complete feedback path against the 24 MHz count-rate rating rather than relying only on clock-edge rise time.

Place the supply bypass capacitor close to the VDD and VSS pins and use the manufacturer-recommended connection topology. The supported 3 V to 18 V range permits operation across several CMOS supply levels, but switching thresholds and timing margin can change with VDD. Do not treat the minimum supply voltage as a substitute for confirming that every downstream CMOS device has compatible input thresholds and noise margins at the selected operating voltage.

Do not leave the master-reset or preset input floating because an undefined control level can initialize the count incorrectly. Drive each control from a defined CMOS state and ensure that reset and preset are not asserted simultaneously unless the intended operation is explicitly permitted. Also avoid treating the Q outputs as independently buffered clock outputs when driving multiple loads, because their drive capability and transition timing must satisfy the connected circuit.

Route the 16-pin CDIP footprint according to the exact alternative datasheet rather than relying only on the general DIP outline. Confirm whether a chosen substitute uses the same row spacing, pin numbering, and optional exposed connections. Keep clock and feedback nets away from noisy analog or power-converter routes, and provide a stable ground reference to minimize switching noise induced on the counter outputs.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The CD4040BD3 is a through-hole CMOS logic IC; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited component information.

تم التحقق من البيانات في: 2026-11-19 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

CD4040BD3 datasheet CD4040BD3 pinout CD4040BD3 datasheet pdf CD4040BD3 CDIP-16 CD4040BD3 24 MHz counter CD4040BD3 3V 18V CD4040BD3 frequency divider CD4040BD3 replacement CD4040BD3 equivalent CD4040BD3 vs MC14040B CD4040BD3 price CD4040BD3 stock Texas Instruments CD4040BD3 CD4040BD3 application circuit CD4040BD3 negative edge counter

المكونات والمصطلحات ذات الصلة

Texas Instruments CD4040BD3 CD4040BD MC14040B HEF4040B CD4040BC CD4000B binary counter ripple-carry counter frequency divider CMOS logic integrated circuit logic IC negative-edge trigger 3 V to 18 V 24 MHz count rate 12-bit counter CDIP-16 DIP-16 through-hole package industrial timing pulse counting binary divider output master reset counter preset
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر