Texas Instruments

CD4053BPW - Triple 2:1 CMOS Multiplexer | Texas Instruments

Référence : CD4053BPW ✓ Actif
20 V Vdss 240 ohm typical Rds(on) 16-pin TSSOP Package
MOQ : 1 |

CD4053BPW Présentation

The Texas Instruments CD4053BPW is a three-channel, 2:1 analog multiplexer and demultiplexer rated for a 20 V supply. Each channel uses independent A, B, and C control inputs, while a common inhibit input can disable the selected signal path. The device provides a typical 240 ohm on-state resistance and is packaged in a 16-pin TSSOP for compact surface-mount designs. Its logic-level control interface allows the multiplexer to be driven by compatible digital logic while routing analog signals.

An analog multiplexer is a semiconductor switching device that connects one of several signal terminals to a common terminal under digital control. The CD4053B belongs to the CMOS 4000 logic series and implements three independent single-pole, double-throw switches. Each switch can route either of two inputs to its common output, or route the common terminal to either input when used as a demultiplexer. This places the device within the broader hierarchy of analog switches, multiplexers, interface ICs, and signal-routing semiconductors.

The principal electrical features are the 20 V supply rating, three independently addressed 2:1 channels, and typical 240 ohm on-state resistance. The A, B, and C address inputs determine which member of each pair is connected, while the inhibit function provides a common shutdown path. Because the channels are independent, one package can route three unrelated analog or digitized signals without sharing an address line. The TSSOP package reduces board area compared with larger leaded and standard small-outline packages.

The CD4053B uses CMOS construction to provide low-power operation and high input impedance. This is important when the source impedance is relatively high or when the mux feeds a sensitive downstream circuit. The inhibit input can also simplify measurement-system control by isolating selected nodes during setup or test. Signal integrity still depends on layout: input and output routing should be short, the supply must remain stable, and unused control inputs should not float during transitions.

Typical applications include routing analog sensor outputs into an ADC, selecting audio or video paths, sharing instrumentation channels, building sample-and-hold systems, and distributing control signals through multiplexed buses. The device is especially useful when multiple analog sources must reach one converter or measurement instrument through a limited number of external connections. Each channel can select a separate pair of sources because the address controls are separate rather than multiplexed through a shared binary bus.

A key design consideration is that a multiplexer does not amplify or buffer signals. Insertion loss, on-state resistance, bandwidth, off-state leakage, and charge injection can affect accuracy, especially with high-impedance sources or slow sampling systems. Keep the signal path short, provide a stable bypass connection at the supply pins, and ensure address transitions occur outside the ADC acquisition window. Consult the pin-description and timing tables in the manufacturer datasheet before assigning control logic.

This page combines the device architecture, application guidance, pin-verification considerations, and a parameter-focused comparison framework. It is intended to help engineers select the correct multiplexing approach, plan PCB routing, evaluate replacement risk, and distinguish the CD4053BPW from related CD4000-series switch and multiplexer devices before committing a design to production.

Alternatives de remplacement direct pour CD4053BPW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec CD4053BPW (même facteur de forme et même empreinte) — différant par Mounting Type, Package, Product Type.

Texas Instruments
Mounting Type: Through-hole
Package: 16-pin PDIP
Product Type: Triple 2:1 SPDT analog multiplexer/demultiplexer with logic-level conversion
Comparer avec CD4053BPW →

CD4053BPWRG4

✅ Remplacement direct
📦 TSSOP-16 (PW)
Same CD4053B function, 16-pin TSSOP terminal arrangement, and 20 V rating; ordering suffix identifies the supplied packing format

📋 Alternative de référence (hors catalogue)

CD4053BE

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 TSSOP-16 (PW)
Triple 2:1 SPDT analog multiplexer/demultiplexer with logic-level conversion · 3 circuits · 2:1 SPDT per channel · 20 V · 240 ohm · Supported · -55 °C to +125 °C · 16-pin PDIP

Contactez-nous pour le prix

Voir la fiche technique →

CD4053BPW Spécifications

Product Type Triple 2:1 analog multiplexer/demultiplexer
Number of Channels 3 channels
Configuration 2:1 SPDT per channel
Maximum Supply Voltage 20 V
On-State Resistance 240 ohm typical
Address Inputs 3 independent inputs: A, B, and C
Inhibit Input 1 common inhibit input
Logic-Level Control Supported
Technology CMOS
Boîtier 16-pin TSSOP
Type de montage Surface mount

Guide de configuration des broches du CD4053BPW 16-pin tssop

Configuration des broches du CD4053BPW (boîtier 16-pin tssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-pin tssop pour le CD4053BPW

Aucune donnée de brochage détaillée disponible pour CD4053BPW.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

CD4053BPW convient pour 6 applications: Multiplexed Analog Sensor Inputs, Audio Signal Source Selection, Test and Measurement Signal Routing, Video Signal Routing, Automated Control Signal Distribution, Battery-Powered Portable Instrument.

🧩

Multiplexed Analog Sensor Inputs

The CD4053BPW is suitable for connecting several analog sensor outputs to a shared ADC front end because it provides three independent 2:1 sections within one 16-pin TSSOP package. Each A, B, or C control input selects one member of a corresponding signal pair, so unrelated measurements can share a converter without sharing an address bus. The 240 ohm typical on-state resistance should be included in the sensor impedance and ADC settling analysis. Keep traces short and place the multiplexer close to the ADC when the source impedance is high. Because the device does not buffer signals, account for charge injection and switching transients by changing address states outside the critical acquisition interval.

🎧

Audio Signal Source Selection

The CD4053BPW can route two alternative audio sources into each of three downstream channels when signal levels remain within the device's specified operating range. Its 240 ohm typical on-state resistance introduces source impedance, so the receiving amplifier should have a sufficiently high input impedance to avoid excessive gain loss. The common inhibit control provides a useful way to mute or isolate the selected paths during setup. Keep the analog routing compact, maintain a stable supply reference with local bypassing, and avoid long traces that can increase pickup. Switching the address inputs during sensitive program segments can also generate transients, making controlled mute timing important.

🖥️

Test and Measurement Signal Routing

The CD4053BPW is useful in test and measurement equipment where several test nodes must be selected into a common instrument channel. Three independent 2:1 paths allow the system to compare or alternate signals without requiring a separate multiplexer for each measurement. The typical 240 ohm on-resistance and input leakage must be included in high-impedance measurement error budgets, while the inhibit input can isolate the selected path during fixture transitions. Place the device near the measurement interface, use short guarded routes where practical, and ensure the external attenuator or amplifier does not exceed the mux's permitted signal range. Address transitions should be synchronized away from the instrument's acquisition period.

📺

Video Signal Routing

The CD4053BPW can provide basic selection between pairs of video-like signals when bandwidth, capacitance, and crosstalk requirements remain within the manufacturer's specified limits. Its three separate 2:1 sections permit routing of several related sources into a common video processing stage. Because the device is a switching mux rather than a video amplifier, impedance matching and trace layout can determine whether ringing or crosstalk appears at the destination. Keep the selected signal path short, use a controlled reference for downstream circuitry, and confirm that the source amplitude remains within the allowed signal range. Use controlled switching when changing channels to prevent transient artifacts from reaching downstream circuitry.

🏭

Automated Control Signal Distribution

The CD4053BPW can distribute control or low-level analog signals by using each section as a 2:1 demultiplexer. This arrangement lets one controller address one of two destinations per channel while the inhibit input provides a common disable state. It is useful in compact industrial control boards where relay drivers, test points, or low-current actuators must be selected under firmware control. Verify that the driven voltage and load current remain within the device's limits, add protection for inductive loads, and account for the 240 ohm typical on-resistance in the control-path budget. A low-impedance driver and short traces will reduce sensitivity to switching transients.

📱

Battery-Powered Portable Instrument

The CD4053BPW supports compact instrumentation where several analog inputs must be shared with a limited number of front-end connections. Its TSSOP package reduces board area, while the CMOS control interface can be driven by low-voltage logic when operating conditions are suitable. In battery-powered equipment, supply current, leakage, and off-state behavior can materially affect standby life, so the quiescent-current and leakage limits should be checked in the manufacturer datasheet. Use high-impedance sensing paths to minimize error through the 240 ohm typical switch resistance. Local supply bypassing and a defined state for every control input will improve stability during startup and shutdown.

Récapitulatif des produits recommandés

CD4053BM96 CD4053B family device used for the same multiplexing function in a 16-pin SOIC package Utilisé dans : Multiplexed Analog Sensor Inputs, Audio Signal Source Selection, Test and Measurement Signal Routing, Video Signal Routing, Automated Control Signal Distribution, Battery-Powered Portable Instrument CD74HC4053 Logic-family multiplexer referenced as a functional replacement candidate Utilisé dans : Multiplexed Analog Sensor Inputs, Audio Signal Source Selection, Video Signal Routing, Battery-Powered Portable Instrument SN74LV4053A Replacement candidate identified in the manufacturer support discussion Utilisé dans : Test and Measurement Signal Routing, Automated Control Signal Distribution
What is the CD4053BPW?
The CD4053BPW is a three-channel, 2:1 analog multiplexer and demultiplexer with a 20 V maximum supply voltage and a 240 ohm typical on-state resistance. According to the Texas Instruments CD4053B product page, each channel can select one of two signal paths through independent A, B, and C control inputs. The device is packaged in a 16-pin TSSOP and is intended for routing analog signals under digital control.
What is the operating voltage of CD4053BPW?
The CD4053BPW is rated for a maximum supply voltage of 20 V, as stated on the Texas Instruments CD4053B product page. The manufacturer product page identifies the CD4053B as a 20 V multiplexer with logic-level control. Confirm the exact operating conditions, recommended supply range, and electrical limits against the manufacturer datasheet for the selected temperature grade and package ordering code.
How many analog channels does CD4053BPW have?
The CD4053BPW contains three independent 2:1 channels, with one control input allocated to each channel. Texas Instruments describes the CD4053B as a three-channel 2:1 multiplexer. The A, B, and C inputs independently determine which path in each channel is connected, while a common inhibit input provides an additional control function across the device.
Where can I download the CD4053BPW datasheet PDF?
The official CD4053B product page is the appropriate starting point for the CD4053BPW datasheet and supporting ordering information. Texas Instruments identifies the CD4053BPW as a 16-pin TSSOP ordering option of the CD4053B family. Use the manufacturer-hosted PDF linked from the product page so the pin description, electrical characteristics, and ordering information match the intended device revision.
Where can I find the CD4053BPW pinout?
The CD4053BPW pin assignment is documented in the manufacturer datasheet rather than in the distributor title or summary. The device uses a 16-pin TSSOP package and includes the A, B, and C address inputs, a common inhibit input, three channel common terminals, and six paired signal terminals. Use the pin-description table in the manufacturer datasheet when assigning PCB nets and numbering the physical package.
What can replace the CD4053BPW?
The closest documented functional replacements are the TI SN74LV4053A and CD74HC4053, which were identified in a Texas Instruments replacement discussion for the CD4053B family. A replacement should not be treated as drop-in until its exact ordering suffix, package, pinout, supply range, logic thresholds, and on-resistance are checked against the CD4053BPW. The 16-pin TSSOP footprint alone does not establish functional or pin compatibility.
Is CD4053BPW the same as CD74HC4053?
No. The CD4053BPW and CD74HC4053 both provide analog multiplexing functions, but they belong to different CMOS logic families and can differ in supply range, switching resistance, speed, logic thresholds, and electrical limits. The Texas Instruments CD4053B family is specified for 20 V operation, while exact CD74HC4053 characteristics must be taken from its own datasheet before it is considered for a replacement.
CD4053BPW vs SN74LV4053A — which is better for a 5 V design?
The SN74LV4053A is a logical candidate for a 5 V design because it is an LVCMOS implementation, while the CD4053BPW belongs to the higher-voltage CD4000B family. The better choice depends on signal range, switching resistance, leakage, logic thresholds, speed, and exact package. Compare the manufacturer datasheets rather than assuming that functional multiplexing equivalence guarantees pin-to-pin replacement.
When should I choose CD4053BPW over a lower-voltage analog switch?
Choose the CD4053BPW when the design needs three independent 2:1 selections, a 20 V-rated device, CMOS input behavior, and a common inhibit function. A lower-voltage switch may be preferable for compact low-voltage systems where lower on-resistance, faster transitions, lower leakage, or a smaller package are more important. The decision should be based on the complete signal and control-voltage envelope rather than package size alone.
Is CD4053BPW suitable for routing ADC inputs?
The CD4053BPW is suitable for routing multiple analog inputs into an ADC when the selected channels operate within the device's voltage and impedance limits. Its three independent 2:1 sections reduce the number of external ADC connections. Account for the 240 ohm typical on-state resistance, leakage, charge injection, and acquisition time, and change address states outside the critical sampling window.
What is the on-state resistance of CD4053BPW?
The CD4053BPW has a 240 ohm typical on-state resistance, according to the Texas Instruments product listing summary. This value is important when driving a high-impedance or precision measurement input because the switch resistance forms part of the source impedance seen by the downstream circuit. Use the manufacturer datasheet for test conditions, voltage dependency, temperature behavior, and the guaranteed limit relevant to the design.
Can the inhibit pin be used for power sequencing?
The inhibit input can disable the selected signal paths and may be useful in system-control sequences, but it should not automatically be treated as a power-supply enable. Its valid logic levels and propagation timing must be checked against the manufacturer datasheet. If a downstream device must remain fully unpowered or isolated, verify that the inhibit state does not back-power the signal path.
Where to buy CD4053BPW online?
Use the Request a Quote form on this page to request CD4053BPW availability, current pricing, minimum order quantity, and lead time. Quote requests keep commercial terms aligned with the requested package code and quantity. The manufacturer and distributor product pages on this page can also be used to review the exact ordering suffix and technical documentation.
What is the price of CD4053BPW?
Current CD4053BPW pricing is shown through the Request a Quote form on this page and should be confirmed for the requested quantity and shipment destination. Price can vary with order quantity, inventory, package code, and purchasing terms. Request a formal quotation rather than relying on an outdated single-unit or unverified market price.
Is CD4053BPW in stock and what is its lead time?
Current stock, minimum order quantity, and lead time for CD4053BPW should be confirmed through the Request a Quote form on this page. The Texas Instruments product page identifies the device and its ordering information, while distributor listings indicate where the part is offered. Enter the required quantity and delivery schedule so the quotation reflects current manufacturing and inventory conditions.

Données de référence d'ingénierie pour CD4053BPW — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the CD4053BPW when the design requires three independent 2:1 selections, a 20 V-rated CMOS mux, and a 16-pin TSSOP footprint. It is a practical option for routing analog sensor signals into an ADC, selecting audio or test signals, and sharing control paths. The CD4053BM96 offers the same broad CD4053B channel architecture but uses a different package, so it is not a direct TSSOP drop-in. Consider the SN74LV4053A when a low-voltage logic family and its specific electrical characteristics better fit a low-voltage system. Consider the CD74HC4053 when its logic thresholds, switching performance, and package align with the design. For every candidate, verify the pinout, supply range, on-resistance, leakage, bandwidth, and control timing rather than relying only on the multiplexed-channel count.

Comparaison avec les alternatives

Paramètre Ce produit
Product Type Triple 2:1 analog multiplexer/demultiplexer
Number of Channels 3 channels
Maximum Supply Voltage 20 V
On-State Resistance 240 ohm typical
Address Inputs 3 independent inputs: A, B, and C
Inhibit Function Common inhibit input
Package 16-pin TSSOP
Brand Texas Instruments
Technology CMOS

Principaux différenciateurs

  • Three independently addressed channels in one package (vs CD4053BM96)
  • Higher-voltage CD4000B operating class (vs SN74LV4053A)
  • Three independent selectors plus common inhibit (vs CD74HC4053)

Notes de conception

Place the CD4053BPW close to the ADC, amplifier, or other destination that receives the selected signal. Keep each analog route short and avoid routing control inputs beneath sensitive analog traces. Decouple the supply at the device with the capacitance specified by the manufacturer datasheet, and use a low-impedance ground reference so switching transients do not couple into adjacent measurement circuitry.

Include the 240 ohm typical on-state resistance in the source-impedance calculation for the selected channel. With high-impedance sensors, this resistance can create an RC settling error with the ADC input capacitance. Either lower the effective source impedance, increase acquisition time, or account for the settling error in system calibration. Change address states outside critical sampling windows to reduce the effect of charge injection.

Do not treat the inhibit input as a substitute for power isolation without checking the device's internal paths and electrical limits. Likewise, do not assume that every part sharing the CD4053B function is a drop-in replacement. Confirm the physical package, pin numbering, supply range, logic thresholds, on-resistance, and timing from each candidate's manufacturer datasheet before replacing the CD4053BPW in production.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer product page confirms the CD4053B family and ordering information, but no specific RoHS, REACH, halogen-free, or conflict-minerals declaration is stated here.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

CD4053BPW datasheet CD4053BPW pinout CD4053BPW datasheet pdf CD4053BPW equivalent CD4053BPW replacement CD4053BPW cross reference CD4053BPW vs CD74HC4053 CD4053BPW footprint CD4053BPW 20V multiplexer CD4053BPW 240 ohm CD4053BPW price CD4053BPW stock Texas Instruments CD4053BPW CD4053BPW TSSOP pinout CD4053BPW analog switch application

Composants & termes associés

Texas Instruments CD4053BPW CD4053B CD4053BM96 CD74HC4053 SN74LV4053A analog multiplexer analog demultiplexer analog switch SPDT switch CMOS CD4000 logic series logic-level control on-state resistance 20 V supply 16-pin TSSOP TSSOP package family surface-mount package analog-to-digital converter signal routing channel selection inhibit input charge injection ADC acquisition time
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ