CD4053BPW - Triple 2:1 CMOS Multiplexer | Texas Instruments
MPN: CD4053BPW ✓ 啟用中CD4053BPW 概覽
An analog multiplexer is a semiconductor switching device that connects one of several signal terminals to a common terminal under digital control. The CD4053B belongs to the CMOS 4000 logic series and implements three independent single-pole, double-throw switches. Each switch can route either of two inputs to its common output, or route the common terminal to either input when used as a demultiplexer. This places the device within the broader hierarchy of analog switches, multiplexers, interface ICs, and signal-routing semiconductors.
The principal electrical features are the 20 V supply rating, three independently addressed 2:1 channels, and typical 240 ohm on-state resistance. The A, B, and C address inputs determine which member of each pair is connected, while the inhibit function provides a common shutdown path. Because the channels are independent, one package can route three unrelated analog or digitized signals without sharing an address line. The TSSOP package reduces board area compared with larger leaded and standard small-outline packages.
The CD4053B uses CMOS construction to provide low-power operation and high input impedance. This is important when the source impedance is relatively high or when the mux feeds a sensitive downstream circuit. The inhibit input can also simplify measurement-system control by isolating selected nodes during setup or test. Signal integrity still depends on layout: input and output routing should be short, the supply must remain stable, and unused control inputs should not float during transitions.
Typical applications include routing analog sensor outputs into an ADC, selecting audio or video paths, sharing instrumentation channels, building sample-and-hold systems, and distributing control signals through multiplexed buses. The device is especially useful when multiple analog sources must reach one converter or measurement instrument through a limited number of external connections. Each channel can select a separate pair of sources because the address controls are separate rather than multiplexed through a shared binary bus.
A key design consideration is that a multiplexer does not amplify or buffer signals. Insertion loss, on-state resistance, bandwidth, off-state leakage, and charge injection can affect accuracy, especially with high-impedance sources or slow sampling systems. Keep the signal path short, provide a stable bypass connection at the supply pins, and ensure address transitions occur outside the ADC acquisition window. Consult the pin-description and timing tables in the manufacturer datasheet before assigning control logic.
This page combines the device architecture, application guidance, pin-verification considerations, and a parameter-focused comparison framework. It is intended to help engineers select the correct multiplexing approach, plan PCB routing, evaluate replacement risk, and distinguish the CD4053BPW from related CD4000-series switch and multiplexer devices before committing a design to production.
直接替換替代品,適用於 CD4053BPW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CD4053BPW (相同外形與佔位) — 差異在於 Mounting Type, Package, Product Type.
CD4053BPWRG4
✅ 直接替換📋 參考替代品(不在目錄中)
CD4053BPW 規格
| Product Type | Triple 2:1 analog multiplexer/demultiplexer |
| Number of Channels | 3 channels |
| Configuration | 2:1 SPDT per channel |
| Maximum Supply Voltage | 20 V |
| On-State Resistance | 240 ohm typical |
| Address Inputs | 3 independent inputs: A, B, and C |
| Inhibit Input | 1 common inhibit input |
| Logic-Level Control | Supported |
| Technology | CMOS |
| 封裝 | 16-pin TSSOP |
| 安裝類型 | Surface mount |
CD4053BPW 16-pin tssop 腳位配置指南
CD4053BPW(16-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: CD4053BPW.
請參閱 資料表 以查看完整腳位配置。
典型應用
CD4053BPW 適用於 6 應用s: Multiplexed Analog Sensor Inputs, Audio Signal Source Selection, Test and Measurement Signal Routing, Video Signal Routing, Automated Control Signal Distribution, Battery-Powered Portable Instrument.
Multiplexed Analog Sensor Inputs
The CD4053BPW is suitable for connecting several analog sensor outputs to a shared ADC front end because it provides three independent 2:1 sections within one 16-pin TSSOP package. Each A, B, or C control input selects one member of a corresponding signal pair, so unrelated measurements can share a converter without sharing an address bus. The 240 ohm typical on-state resistance should be included in the sensor impedance and ADC settling analysis. Keep traces short and place the multiplexer close to the ADC when the source impedance is high. Because the device does not buffer signals, account for charge injection and switching transients by changing address states outside the critical acquisition interval.
推薦
Audio Signal Source Selection
The CD4053BPW can route two alternative audio sources into each of three downstream channels when signal levels remain within the device's specified operating range. Its 240 ohm typical on-state resistance introduces source impedance, so the receiving amplifier should have a sufficiently high input impedance to avoid excessive gain loss. The common inhibit control provides a useful way to mute or isolate the selected paths during setup. Keep the analog routing compact, maintain a stable supply reference with local bypassing, and avoid long traces that can increase pickup. Switching the address inputs during sensitive program segments can also generate transients, making controlled mute timing important.
推薦
Test and Measurement Signal Routing
The CD4053BPW is useful in test and measurement equipment where several test nodes must be selected into a common instrument channel. Three independent 2:1 paths allow the system to compare or alternate signals without requiring a separate multiplexer for each measurement. The typical 240 ohm on-resistance and input leakage must be included in high-impedance measurement error budgets, while the inhibit input can isolate the selected path during fixture transitions. Place the device near the measurement interface, use short guarded routes where practical, and ensure the external attenuator or amplifier does not exceed the mux's permitted signal range. Address transitions should be synchronized away from the instrument's acquisition period.
推薦
Video Signal Routing
The CD4053BPW can provide basic selection between pairs of video-like signals when bandwidth, capacitance, and crosstalk requirements remain within the manufacturer's specified limits. Its three separate 2:1 sections permit routing of several related sources into a common video processing stage. Because the device is a switching mux rather than a video amplifier, impedance matching and trace layout can determine whether ringing or crosstalk appears at the destination. Keep the selected signal path short, use a controlled reference for downstream circuitry, and confirm that the source amplitude remains within the allowed signal range. Use controlled switching when changing channels to prevent transient artifacts from reaching downstream circuitry.
推薦
Automated Control Signal Distribution
The CD4053BPW can distribute control or low-level analog signals by using each section as a 2:1 demultiplexer. This arrangement lets one controller address one of two destinations per channel while the inhibit input provides a common disable state. It is useful in compact industrial control boards where relay drivers, test points, or low-current actuators must be selected under firmware control. Verify that the driven voltage and load current remain within the device's limits, add protection for inductive loads, and account for the 240 ohm typical on-resistance in the control-path budget. A low-impedance driver and short traces will reduce sensitivity to switching transients.
推薦
Battery-Powered Portable Instrument
The CD4053BPW supports compact instrumentation where several analog inputs must be shared with a limited number of front-end connections. Its TSSOP package reduces board area, while the CMOS control interface can be driven by low-voltage logic when operating conditions are suitable. In battery-powered equipment, supply current, leakage, and off-state behavior can materially affect standby life, so the quiescent-current and leakage limits should be checked in the manufacturer datasheet. Use high-impedance sensing paths to minimize error through the 240 ohm typical switch resistance. Local supply bypassing and a defined state for every control input will improve stability during startup and shutdown.
推薦
推薦產品摘要
工程參考資料,適用於 CD4053BPW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Product Type | Triple 2:1 analog multiplexer/demultiplexer |
| Number of Channels | 3 channels |
| Maximum Supply Voltage | 20 V |
| On-State Resistance | 240 ohm typical |
| Address Inputs | 3 independent inputs: A, B, and C |
| Inhibit Function | Common inhibit input |
| Package | 16-pin TSSOP |
| Brand | Texas Instruments |
| Technology | CMOS |
主要差異化特點
- Three independently addressed channels in one package (對比CD4053BM96)
- Higher-voltage CD4000B operating class (對比SN74LV4053A)
- Three independent selectors plus common inhibit (對比CD74HC4053)
設計說明
Place the CD4053BPW close to the ADC, amplifier, or other destination that receives the selected signal. Keep each analog route short and avoid routing control inputs beneath sensitive analog traces. Decouple the supply at the device with the capacitance specified by the manufacturer datasheet, and use a low-impedance ground reference so switching transients do not couple into adjacent measurement circuitry.
Include the 240 ohm typical on-state resistance in the source-impedance calculation for the selected channel. With high-impedance sensors, this resistance can create an RC settling error with the ADC input capacitance. Either lower the effective source impedance, increase acquisition time, or account for the settling error in system calibration. Change address states outside critical sampling windows to reduce the effect of charge injection.
Do not treat the inhibit input as a substitute for power isolation without checking the device's internal paths and electrical limits. Likewise, do not assume that every part sharing the CD4053B function is a drop-in replacement. Confirm the physical package, pin numbering, supply range, logic thresholds, on-resistance, and timing from each candidate's manufacturer datasheet before replacing the CD4053BPW in production.
合規資訊
The manufacturer product page confirms the CD4053B family and ordering information, but no specific RoHS, REACH, halogen-free, or conflict-minerals declaration is stated here.