onsemi

CD4510BCN - Presettable CMOS BCD Up/Down Counter | onsemi

Référence : CD4510BCN ✓ Actif
DIP-16, through hole Package
MOQ : 1 |

CD4510BCN Présentation

The onsemi CD4510BCN is a CMOS presettable BCD up/down counter with four decade-counting outputs, implemented in a 16-pin through-hole DIP package. It provides bidirectional counting, four independently preset BCD input lines, parallel output loading, reset control, and carry input/output functions for extending decimal counting beyond a single decade.

A presettable BCD up/down counter is a digital logic IC that counts in binary-coded decimal increments or decrements. As a member of the CMOS logic hierarchy, the CD4510BCN sits within counter ICs and digital logic ICs, using complementary MOS technology to support operation from compatible low-voltage supply rails. The BCD structure is useful when a system needs decimal 0-to-9 counting rather than a free-running binary count.

The device has four parallel Q outputs for the current BCD digit, four preset inputs that determine the starting count, an active-low clock input, an up/down direction input, an active-low reset input, and an active-low preset-enable input. Its carry input and carry output permit cascaded decades, allowing counters to cover ranges such as 00 through 99 when two CD4510 devices are combined. The target is identified as an industrial-temperature, through-hole DIP-16 part.

The CD4510BCN is particularly useful in laboratory instruments, test equipment, industrial timers, batch counters, and digital decade displays. Its parallel preset capability allows a measurement system to establish a known count before accumulating events, while the up/down input supports bidirectional sequencing without changing the external counter architecture.

Clocking is the primary design consideration. The clock edge behavior, maximum operating frequency, and permissible input transition timing must be confirmed in the manufacturer datasheet for the selected supply voltage. Because this is a legacy CMOS counter rather than a modern clocked logic device, unused inputs should be tied to defined logic levels, supply bypassing should be placed close to the device, and input sources should avoid excessive ringing.

This product record combines the manufacturer family description, package identification, pin-level connection information, sourcing facts, and practical replacement guidance. It distinguishes verified drop-in candidates from broader functional equivalents so engineers can make a PCB-level replacement decision without confusing package compatibility with electrical equivalence.

Alternatives de remplacement direct pour CD4510BCN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec CD4510BCN (même facteur de forme et même empreinte) — différant par Counter Type, Logic Family, Output Type, Package.

Texas Instruments
Counter Type: 4-bit BCD presettable up/down counter
Logic Family: CMOS CD4000 series
Output Type: Decoded BCD and complementary BCD
Comparer avec CD4510BCN →

CD4510BCN/A+

✅ Remplacement direct
📦 DIP-16
National Semiconductor revision suffix; published result identifies the same 16-terminal industrial DIP format, but electrical timing differences are not quantified

📋 Alternative de référence (hors catalogue)

MM14510BCN

✅ Remplacement direct
📦 DIP-16
National Semiconductor MM14510 implementation in DIP-16; exact supply, timing, and function differences are not quantified in the cross-reference result

📋 Alternative de référence (hors catalogue)

CD4510BCN Valeurs maximales et caractéristiques électriques

Counter Type Presettable BCD up/down counter
Logic Family CMOS
Technology Complementary MOS enhancement-mode devices
Number of Counter Outputs 4 BCD outputs
Number of Preset Inputs 4 BCD preset inputs
Counting Direction Up or down
Type de sortie Parallel BCD
Boîtier DIP-16, through hole
Terminal Count 16 terminals
Package Shape Rectangular
Temperature Grade Industrial
Carry Function Carry input and carry output
AEC-Q100 Qualification Not applicable

Configuration des broches de CD4510BCN

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Broche 1 CLOCK — Counting clock input
Broche 2 UP/DOWN — Count direction control input
Broche 3 RESET — Counter reset input
Broche 4 PRESET ENABLE — Parallel preset load control input
Broche 5 Q0 — BCD output, least significant bit
Broche 6 Q1 — BCD output
Broche 7 Q2 — BCD output
Broche 8 Q3 — BCD output, most significant bit
Broche 9 VSS — Ground reference
Broche 10 CARRY — Carry output
Broche 11 PRESET0 — BCD preset input, least significant bit
Broche 12 PRESET1 — BCD preset input
Broche 13 PRESET2 — BCD preset input
Broche 14 PRESET3 — BCD preset input, most significant bit
Broche 15 VDD — Positive power supply
Broche 16 CARRY IN — Carry input for cascaded decades

Applications typiques

CD4510BCN convient pour 6 applications: Industrial Batch and Piece Counter, Digital Decade Display Counter, Laboratory Timing and Event Counter, Bidirectional Position Counter, Digital Timer with Programmable Start Count, Legacy Instrumentation Service and Repair.

🏭

Industrial Batch and Piece Counter

The CD4510BCN suits legacy industrial systems that must accumulate items in decimal while retaining a four-bit BCD count for display or control. A sensor conditioned into a valid clock signal can increment the counter on each detected item, while the up/down input permits forward counting, reverse sequencing, or operator-selected operating modes. Its BCD output avoids binary-to-decimal conversion in downstream control logic. The DIP-16 through-hole package also supports repairable industrial instruments and legacy control boards. Before implementation, confirm the counter's operating speed against the sensor's pulse rate and validate the reset and preset-enable sequence against the machine controller.

📺

Digital Decade Display Counter

The CD4510BCN provides a natural interface between event counting and decimal display equipment because its four outputs represent one BCD digit. The count can be passed directly to compatible BCD-to-seven-segment decoder and driver circuitry rather than converted from binary. Preset loading allows an instrument to begin at a selected decade, and the carry output supports a second counter for tens. The design should include stable clock conditioning, defined logic states for control inputs, and supply bypassing close to the IC. Confirm the required counter polarity and clock edge against the selected display decoder and system timing requirements.

🔧

Laboratory Timing and Event Counter

CD4510BCN can be used in laboratory instruments that count timed intervals, repetitive events, or system cycles and require a readable decimal result. A stable oscillator or trigger source drives the clock input, while the counter state can be observed, preset, or reset by the instrument control logic. The BCD carry output is useful for extending the measurable range or signaling an end point. Because the CD4510BCN is a legacy CMOS counter, validate propagation delay, maximum clock frequency, and supply tolerance at the intended clock rate. Use a Schmitt-conditioned clock source if the source has slow edges or significant noise.

⚡

Bidirectional Position Counter

The CD4510BCN is appropriate for simple position or motion-counting mechanisms where the counter must increment for one direction and decrement for the reverse. A direction-controlled clock source can present pulses to the counter, while the BCD outputs report the current position in decimal. The preset inputs support a homing operation in which the mechanism is initialized to a known coordinate before incremental counting resumes. Care is required to prevent reverse-direction chatter from creating erroneous counts. Debounce mechanical limit switches and condition encoder or switch outputs before they reach the clock or direction inputs.

⌚

Digital Timer with Programmable Start Count

A CD4510BCN can establish a programmable count-down origin for timer, cycle-control, or pulse-batch systems. The preset inputs load the starting value, after which the direction input selects decrement operation and the carry output identifies the terminal count. This allows a controller to compare a counter state against a process limit or initiate an action after a predetermined number of events. The implementation should define all control inputs during reset and power-up, use clean reset release timing, and avoid asynchronous control changes near a clock edge. Confirm whether the intended timing sequence requires preset on the same edge as reset release or during a separate control interval.

🔧

Legacy Instrumentation Service and Repair

The through-hole DIP-16 CD4510BCN is particularly useful in maintenance of older counters, decade-counters, and digital measurement instruments where the original footprint is already defined. Its four BCD outputs, preset inputs, and carry facilities reproduce the behavior expected by many TTL-era logic boards while operating from CMOS-compatible supply levels. When repairing such equipment, compare the pin functions, supply voltage, reset polarity, and clock edge of the installed device with the replacement documentation. Existing PCB layout and connector spacing make DIP-16 more convenient than introducing a surface-mount equivalent during a low-volume repair.

Récapitulatif des produits recommandés

SN74LS90 Related decade-counter function in a legacy through-hole logic design Utilisé dans : Industrial Batch and Piece Counter, Digital Decade Display Counter, Laboratory Timing and Event Counter, Bidirectional Position Counter, Digital Timer with Programmable Start Count, Legacy Instrumentation Service and Repair SN74LS93 Related counter IC for comparison in legacy digital control systems Utilisé dans : Industrial Batch and Piece Counter, Laboratory Timing and Event Counter, Bidirectional Position Counter, Legacy Instrumentation Service and Repair SN74LS85 Related four-bit magnitude comparator for decoded decimal-limit checks Utilisé dans : Digital Decade Display Counter, Digital Timer with Programmable Start Count
What is the CD4510BCN?
The CD4510BCN is a CMOS presettable BCD up/down counter with four parallel decade-count outputs. According to the TI CD4510B product page, the device belongs to the CMOS presettable up/down counter family. It supports loading a preset value, counting upward or downward, resetting the state, and cascading multiple decades through its carry input and output.
What are the key specifications of CD4510BCN?
The CD4510BCN provides four BCD outputs, four preset inputs, bidirectional counting, reset control, and carry input/output functions in a 16-pin DIP package. The target is categorized as an industrial-temperature, through-hole DIP-16 counter IC. Its exact supply-voltage range, maximum clock frequency, and operating-temperature limits must be taken from the manufacturer datasheet for the relevant grade.
What is the pinout of CD4510BCN?
The CD4510BCN uses a standard 16-pin counter arrangement: clock, up/down direction, reset, preset enable, four Q outputs, four preset inputs, VDD, VSS, carry input, and carry output. Use the manufacturer pin-description table when assigning PCB tracks. The CD4510B pinout reference identifies a DIP-16 footprint, and pin 1 follows the standard DIP orientation with the notch at the top.
How do I use the CD4510BCN as an up/down counter?
The CD4510BCN counts upward or downward by applying clock edges while controlling its direction input. Its four Q outputs represent one BCD decade, and the carry output indicates the terminal count needed when additional decades are cascaded. Confirm the direction and clock-edge truth table in the manufacturer datasheet before finalizing control logic.
Can CD4510BCN be preset to a specific count?
Yes, the CD4510BCN accepts a four-bit BCD preset value and can load it into the counter through the preset-enable and preset inputs. This makes the device suitable for systems that must begin from a known count. Confirm the preset-enable timing and required preset-input states in the manufacturer datasheet before connecting external control logic.
How do you cascade CD4510BCN decimal counters?
Two CD4510BCN devices can form a 00-to-99 decimal counter by connecting the lower decade's carry output to the higher decade's carry input and driving both devices from the same clock. The lower counter represents units while the higher counter represents tens. Verify carry-input and carry-output behavior at the selected supply voltage before cascading more than two digits.
What is the difference between CD4510BCN and CD4510BCN/A+?
CD4510BCN/A+ is identified as a National Semiconductor industrial-temperature, through-hole DIP-16 decade counter, while CD4510BCN is listed by onsemi as a BCD counter element. The available cross-reference information does not expose a quantified electrical difference, so treat CD4510BCN/A+ as a candidate requiring datasheet verification rather than assuming identical timing or supply parameters.
What is the best drop-in replacement for CD4510BCN?
No fully documented drop-in replacement was established from the available cross-reference results. CD4510BCN/A+ and MM14510BCN are the closest identified candidates, but the published results do not provide enough numerical timing, voltage, and pinout data to confirm exact interchangeability. Review the manufacturer pin descriptions and operating tables before ordering either candidate.
Can MM14510BCN replace CD4510BCN?
MM14510BCN is a cross-reference candidate for the CD4510BCN, and both are associated with a DIP-16 counter implementation. It should not be treated as a confirmed drop-in substitute because the available result does not establish identical pin functions, supply range, clock frequency, or output timing. Validate the National Semiconductor MM14510 data against the CD4510B datasheet before PCB reuse.
When should I choose CD4510BCN over a binary counter?
Choose CD4510BCN when the system must count directly in decimal and requires a four-bit BCD result. A conventional binary counter produces a 4-bit binary sequence from 0 through 15, whereas the CD4510BCN organizes one decade from 0 through 9 and provides decade carry capability. It is preferable when BCD display, decade addressing, or preset-from-decimal logic is central to the design.
Is CD4510BCN suitable for industrial counter applications?
CD4510BCN is identified as an industrial-temperature grade through-hole DIP-16 counter, making it suitable for many industrial and legacy instrumentation applications. Suitability still depends on the exact temperature range, supply voltage, noise immunity, and clock-rate requirements of the installed system. Confirm those limits in the manufacturer datasheet before final qualification.
Where can I download the CD4510BCN datasheet PDF?
The official TI CD4510B product page is the preferred starting point for the CMOS presettable up/down counter documentation. It identifies the CD4510B family and links to ordering, parameters, and quality information. The target CD4510BCN ordering code denotes the onsemi-sourced 16-pin DIP implementation, so use the onsemi datasheet associated with that exact ordering code for production release.
How should CD4510BCN inputs be handled when they are unused?
Unused CMOS inputs should be connected to a defined valid logic level rather than left floating. Exact requirements depend on whether the unused function is clock, direction, reset, preset enable, preset data, or carry input. Follow the unused-pin guidance in the manufacturer datasheet and account for any input that must remain high or low for a defined operating state.
What clock and layout precautions apply to CD4510BCN?
Keep the clock path short and shield it from noisy analog or switching nodes because a counter can interpret unwanted transitions as counts. Place the supply bypass capacitor close to VDD and VSS, provide a low-impedance ground return, and avoid long parallel clock traces that can couple crosstalk. Verify maximum frequency and setup or hold timing at the actual supply voltage.
Where can I buy CD4510BCN and what is the lead time?
Use the Request a Quote form on this page to request CD4510BCN availability, current lead time, and order quantity. The CD4510BCN is offered in a 16-pin through-hole DIP package and is associated with onsemi. Stock and delivery schedules can change, so obtain a written quotation for the exact ordering code and quantity before committing the production build.
Is CD4510BCN compliant with RoHS and REACH?
The RoHS and REACH status of the exact CD4510BCN ordering code must be confirmed in the manufacturer's current compliance documentation. A historical CD4510 family designation does not by itself establish the status of a later source or package code. Request the manufacturer material declaration or product-page compliance record before using the part in a restricted-market design.

Données de référence d'ingénierie pour CD4510BCN — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose CD4510BCN when the existing PCB requires a through-hole 16-pin CMOS BCD up/down counter with parallel preset, reset, and decade-carry functions. It is especially appropriate for legacy industrial, laboratory, display, timing, and service applications that already use BCD signals. CD4510BCN/A+ is a reasonable candidate when the original documentation identifies that National Semiconductor revision suffix, but its exact electrical characteristics should be compared with the installed device. MM14510BCN may fit the DIP-16 footprint, yet it should be selected only after its pin functions, supply range, and timing have been verified against the CD4510B family documentation. SN74LS90 is relevant when evaluating a legacy decade-counter replacement, but it is a different logic family and may require interface or timing changes. SN74LS93 is more appropriate for binary event counting. For any substitution, prioritize exact pin behavior, clock-edge polarity, voltage compatibility, and propagation delay rather than package appearance alone.

Comparaison avec les alternatives

Paramètre Ce produit CD4510BCN/A+ MM14510BCN
Brand onsemi onsemi onsemi
Package DIP-16 through hole DIP-16 through hole DIP-16 through hole
Special Ordering Code CD4510BCN CD4510BCN/A+ revision suffix MM14510BCN designation

Principaux différenciateurs

  • Direct BCD decade counting avoids binary-to-decimal conversion (vs SN74LS90)
  • Bidirectional operation in a single counter (vs SN74LS93)
  • Through-hole DIP-16 simplifies legacy PCB replacement (vs CD4510BCN/A+)

Notes de conception

Do not treat the CD4510 family name as proof that every CD4510 ordering code is electrically identical. The target is a 16-pin DIP implementation, while the replacement candidates carry revision or manufacturer-series suffixes. Before fitting CD4510BCN/A+ or MM14510BCN, compare pin names, active levels, supply limits, propagation delays, maximum clock frequency, and output drive against the original design. This is particularly important when the counter sits near a legacy TTL bus or communicates with a higher-frequency controller.

Place the IC on the side of the PCB that keeps the clock and control traces short, and provide a direct ground return for the device. Keep the supply bypass capacitor close to the VDD and VSS leads, route clock traces away from switching-node and mains-related circuitry, and maintain adequate spacing between adjacent clock and data routes. A through-hole DIP design also benefits from mechanical stability, but lead strain during servicing can crack through-hole joints and create intermittent clock faults.

The counter will interpret clock transitions as count events, so every unwanted transition becomes a measurement error. Use a Schmitt-trigger conditioner when the source has slow or noisy edges, debounce mechanical contacts before routing them to CLOCK, and avoid floating control inputs. Reset and preset-enable signals should also have defined transition states. Confirm setup and hold requirements in the manufacturer datasheet because the valid timing window can change with supply voltage.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The exact CD4510BCN ordering code is associated with onsemi in the distributor result, while related CD4510 documentation is published by Texas Instruments. Exact environmental and material compliance declarations should be obtained for the selected source and package code.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

CD4510BCN datasheet CD4510BCN pinout CD4510BCN datasheet pdf CD4510BCN equivalent CD4510BCN replacement CD4510BCN cross reference onsemi CD4510BCN CD4510BCN DIP-16 CD4510BCN price CD4510BCN stock CD4510BCN vs CD4510BCN/A+ CD4510BCN BCD counter application CD4510BCN DIP-16 pinout CD4510B CMOS counter

Composants & termes associés

onsemi CD4510BCN CD4510BCN/A+ MM14510BCN CD4510B Texas Instruments National Semiconductor SN74LS90 SN74LS93 SN74LS85 CMOS complementary MOS presettable BCD counter up/down counter decade counter logic IC counter IC digital counter DIP-16 through-hole package BCD output parallel preset carry output industrial instrumentation legacy timer circuit
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ