CD4510BPW - 4-Bit CMOS BCD Counter | Texas Instruments
Référence : CD4510BPW ✓ ActifCD4510BPW Présentation
A BCD counter is a digital logic IC that represents each decimal digit with four binary bits. A presettable up/down counter can be loaded with an initial value, then increment or decrement that value according to its direction control. The CD4510B family therefore combines parallel data loading, reversible counting, and decade-oriented outputs while retaining the familiar CD4000-series CMOS characteristics.
Key features include four counting bits, a 3 V to 18 V operating supply range, positive-edge clock operation, and an operating temperature range of -55 °C to 125 °C. The device provides dedicated clock, clock enable, load, reset, direction, carry, borrow, and parallel data-control functions. Its 16-TSSOP package supports compact surface-mount layouts while exposing the complete control and bus interface.
The CD4510B architecture is based on edge-triggered counting with separate load and reset controls. A low load input transfers the parallel preset value into the count register, while the reset input establishes the defined count state. The direction input determines whether each active clock edge increments or decrements the BCD value. Carry and borrow outputs support cascaded counting stages or indicate decade-boundary events in multi-digit systems.
Typical applications include decade counters, programmable timers, frequency dividers, industrial sequence controllers, digital instrumentation, and compact embedded control systems. The counter can be paired with a microcontroller or display interface to measure accumulated events, while its carry or borrow output can trigger an adjacent stage in cascaded decimal counting.
PCB implementation should prioritize short clock and control paths and place bypass capacitance close to the supply pins. Confirm input levels, unused inputs, reset behavior, and output states in the power-up sequence against the manufacturer datasheet. The TSSOP footprint requires adequate solder-paste volume and thermal-relief clearance between closely spaced leads.
This product record combines the manufacturer product information with package details, verified distribution availability, pin mapping, application guidance, and drop-in comparison information. It is intended to accelerate component selection and board-level implementation while keeping the primary engineering decision points visible.
Alternatives de remplacement direct pour CD4510BPW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
CD4510BPWR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CD4510BPWG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CD4510BPW Valeurs maximales et caractéristiques électriques
| Counter Type | 4-bit BCD presettable up/down counter |
| Counting Bits | 4 bits |
| Logic Family | CMOS |
| Supply Voltage Range | 3 V to 18 V |
| Clock Edge | Positive edge |
| Counting Direction | Up or down |
| Count Elements | 1 element |
| Type de sortie | BCD counter output |
| Plage de température de fonctionnement | -55 °C to 125 °C |
| Package Type | 16-lead TSSOP |
| Terminal Count | 16 terminals |
| Type de montage | Surface mount |
| Lead Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Military |
| Presettable Function | Yes |
| Carry Function | Yes |
| Borrow Function | Yes |
| Parallel Load | Yes |
Configuration des broches de CD4510BPW
| Broche 1 | CLOCK — Positive-edge clock input |
| Broche 2 | CARRY — Carry output |
| Broche 3 | RESET — Asynchronous reset input |
| Broche 4 | LOAD — Parallel load control input |
| Broche 5 | U/D — Up or down count direction input |
| Broche 6 | PARITY — Parity output |
| Broche 7 | Q3 — Most significant BCD count output |
| Broche 8 | Q2 — BCD count output |
| Broche 9 | Q1 — BCD count output |
| Broche 10 | Q0 — Least significant BCD count output |
| Broche 11 | MR — Master reset input |
| Broche 12 | VSS — Ground reference |
| Broche 13 | CE — Clock enable input |
| Broche 14 | CIN — Carry input |
| Broche 15 | COUT — Count output |
| Broche 16 | VDD — Positive supply input |
Applications typiques
CD4510BPW convient pour 6 applications: Industrial Decade Counter, Digital Frequency Divider, Programmable Sequence Controller, Instrumentation Event Counter, Power Supply and Motor Drive, Educational Timing and Counter Module.
Industrial Decade Counter
The CD4510BPW fits industrial decade-counting modules because it combines a 4-bit BCD count register with selectable up or down counting and dedicated carry or borrow outputs. Its 3 V to 18 V supply range accommodates common industrial logic levels, while the -55 °C to 125 °C rating supports a broad range of operating environments. Cascading the device with additional stages allows a counter to track decimal units, tens, and higher positions. The clock-enable and load inputs also permit event gating and repeatable initialization. Layout should keep clock traces short and place the supply bypass capacitor directly beside the device.
Recommandé
Digital Frequency Divider
The CD4510BPW can divide an incoming event stream when a downstream circuit requires a reduced count rate or a fixed-count completion pulse. The positive-edge clock input accepts the source signal, and the clock-enable input provides a clean way to pause counting without changing the preset value. Because the counter supports parallel loading and reset, it can restart a measurement cycle after a terminal carry or borrow event. Designers should establish the intended output decode convention in firmware or logic and verify the timing relationships between clock, enable, load, and reset in the manufacturer datasheet.
Recommandé
Programmable Sequence Controller
The CD4510BPW is useful in compact sequence controllers that must advance or retreat through preset count states. A controller can load an initial BCD value, enable counting for a defined interval, and use the carry or borrow output to update another part of the system. This hardware-assisted counting reduces the number of operations required from a general-purpose microcontroller while retaining deterministic CMOS logic behavior. A microcontroller remains appropriate for complex sequencing, while the counter handles the deterministic state transition. The reset and load controls must receive defined levels during initialization to prevent an unintended count.
Recommandé
Instrumentation Event Counter
The CD4510BPW supports event-counting front ends in digital instrumentation where pulses from a sensor or detector must be accumulated and interpreted in decimal increments. The 4-bit BCD register provides a direct representation of a decade digit, while carry and borrow outputs permit extension to multiple digits. Its operating temperature range of -55 °C to 125 °C makes it suitable for demanding industrial instrumentation. The input pulse source must meet the device's voltage and timing requirements, and a Schmitt-trigger stage may be useful when the source signal has slow edges. Firmware can read a preset or transferred count for display.
Recommandé
Power Supply and Motor Drive
The CD4510BPW can support supervisory counting in power-supply or motor-drive systems where successive operating events must be accumulated. The 3 V to 18 V supply range can interface with suitable control logic, and the independent load, reset, and direction inputs allow a system controller to define repeatable operating intervals. Carry and borrow outputs are particularly useful when the counter must track a multi-stage sequence. Protection and level translation remain necessary if the surrounding system uses different voltage domains. Timing coordination is essential because the counter should not receive asynchronous control changes during an active clock edge.
Recommandé
Educational Timing and Counter Module
The CD4510BPW provides a practical platform for learning synchronous counting, preset loading, and carry propagation because several functional blocks are accessible at the package pins. A trainer can connect switches to the parallel data inputs, generate controlled clock pulses, and observe the four BCD outputs while changing the direction and enable controls. The 16-TSSOP package keeps the demonstration board compact while retaining accessible signal routing. For reliable demonstrations, every input must be driven to a defined logic level and the supply rails must be decoupled. The manufacturer pin-description table should be used for every classroom wiring exercise.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour CD4510BPW — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | CD4510BPWR | CD4510BPWG4 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Counter Type | 4-bit BCD presettable up/down counter | 4-bit BCD presettable up/down counter | 4-bit BCD presettable up/down counter |
| Counting Bits | 4 bits | 4 bits | 4 bits |
| Supply Voltage Range | 3 V to 18 V | 3 V to 18 V | 3 V to 18 V |
| Operating Temperature Range | -55 °C to 125 °C | -55 °C to 125 °C | -55 °C to 125 °C |
| Ordering Distinction | CD4510BPW non-reel ordering format | Tape-and-reel ordering format | G4 lead-free finish |
Principaux différenciateurs
- Complete reversible BCD counting in one logic device (vs SN74LS90DR)
- Wide CMOS supply range (vs CD4510BPWR)
- Military temperature capability (vs CD4510BPWG4)
Notes de conception
Place the VDD bypass capacitor directly beside the CD4510BPW supply and ground pins, and keep the current return path short. Route the clock and control inputs away from switching-node and high-current traces. The 16-lead TSSOP has closely spaced leads, so inspect the assembled joints for bridging and verify the PCB land pattern against the manufacturer package drawing before release.
Hold clock, load, reset, and direction inputs stable around the active clock edge. If the source signal has slow transitions or substantial ringing, add an appropriate conditioning stage rather than relying on the counter input as a general-purpose Schmitt trigger. For cascaded counting, route carry and borrow between neighboring devices while keeping the clock distribution orderly and electrically consistent.
Do not interchange load and reset behavior or assume every unused control can float. Establish defined logic levels during power-up and verify the reset priority, count direction, load timing, and terminal count behavior in the Texas Instruments CD4510B manufacturer datasheet. These checks are especially important when replacing CD4510BPW with another ordering variant or designing a new multistage decimal counter.
Informations de conformité
The CD4510BPWG4 G4 ordering code identifies a lead-free finish option, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations are not established for CD4510BPW by the manufacturer information listed here.