Texas Instruments

CD4510BPW - 4-Bit CMOS BCD Counter | Texas Instruments

MPN: CD4510BPW ✓ פעיל
3 V to 18 V Vdss 16-lead TSSOP Package Positive edge Speed
כמות הזמנה מינימלית: 1 |

CD4510BPW סקירה

The Texas Instruments CD4510BPW is a 4-bit CMOS presettable binary-coded-decimal up/down counter operating from 3 V to 18 V in a 16-lead thin shrink small-outline package. It supports positive-edge counting, parallel loading, carry and borrow functions, and a decoded decade-counting output arrangement. The CD4510BPW is designed for digital counting, sequencing, frequency division, and control applications requiring reversible decade counting.

A BCD counter is a digital logic IC that represents each decimal digit with four binary bits. A presettable up/down counter can be loaded with an initial value, then increment or decrement that value according to its direction control. The CD4510B family therefore combines parallel data loading, reversible counting, and decade-oriented outputs while retaining the familiar CD4000-series CMOS characteristics.

Key features include four counting bits, a 3 V to 18 V operating supply range, positive-edge clock operation, and an operating temperature range of -55 °C to 125 °C. The device provides dedicated clock, clock enable, load, reset, direction, carry, borrow, and parallel data-control functions. Its 16-TSSOP package supports compact surface-mount layouts while exposing the complete control and bus interface.

The CD4510B architecture is based on edge-triggered counting with separate load and reset controls. A low load input transfers the parallel preset value into the count register, while the reset input establishes the defined count state. The direction input determines whether each active clock edge increments or decrements the BCD value. Carry and borrow outputs support cascaded counting stages or indicate decade-boundary events in multi-digit systems.

Typical applications include decade counters, programmable timers, frequency dividers, industrial sequence controllers, digital instrumentation, and compact embedded control systems. The counter can be paired with a microcontroller or display interface to measure accumulated events, while its carry or borrow output can trigger an adjacent stage in cascaded decimal counting.

PCB implementation should prioritize short clock and control paths and place bypass capacitance close to the supply pins. Confirm input levels, unused inputs, reset behavior, and output states in the power-up sequence against the manufacturer datasheet. The TSSOP footprint requires adequate solder-paste volume and thermal-relief clearance between closely spaced leads.

This product record combines the manufacturer product information with package details, verified distribution availability, pin mapping, application guidance, and drop-in comparison information. It is intended to accelerate component selection and board-level implementation while keeping the primary engineering decision points visible.

חלופות תחליף ישיר עבור CD4510BPW — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

CD4510BPWR

✅ Drop-In
📦 16-TSSOP
Same 16-TSSOP footprint, 3 V to 18 V supply, and -55 °C to 125 °C temperature range; shipment format differs by 0 V and 0 °C.

📋 חלופה להתייחסות (לא בקטלוג)

CD4510BPWG4

✅ Drop-In
📦 16-TSSOP
Same 16-TSSOP footprint, 3 V to 18 V supply, and -55 °C to 125 °C temperature range; G4 denotes a different lead-free finish.

📋 חלופה להתייחסות (לא בקטלוג)

CD4510BPW דירוגים מרביים ומאפיינים חשמליים

Counter Type 4-bit BCD presettable up/down counter
Counting Bits 4 bits
Logic Family CMOS
Supply Voltage Range 3 V to 18 V
Clock Edge Positive edge
Counting Direction Up or down
Count Elements 1 element
סוג פלט BCD counter output
טווח טמפרטורת פעולה -55 °C to 125 °C
Package Type 16-lead TSSOP
Terminal Count 16 terminals
סוג הרכבה Surface mount
Lead Form Gull wing
Package Shape Rectangular
Temperature Grade Military
Presettable Function Yes
Carry Function Yes
Borrow Function Yes
Parallel Load Yes

תצורת פינים של CD4510BPW

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
פין 1 CLOCK — Positive-edge clock input
פין 2 CARRY — Carry output
פין 3 RESET — Asynchronous reset input
פין 4 LOAD — Parallel load control input
פין 5 U/D — Up or down count direction input
פין 6 PARITY — Parity output
פין 7 Q3 — Most significant BCD count output
פין 8 Q2 — BCD count output
פין 9 Q1 — BCD count output
פין 10 Q0 — Least significant BCD count output
פין 11 MR — Master reset input
פין 12 VSS — Ground reference
פין 13 CE — Clock enable input
פין 14 CIN — Carry input
פין 15 COUT — Count output
פין 16 VDD — Positive supply input

יישומים טיפוסיים

CD4510BPW מתאים עבור 6 יישוםs: Industrial Decade Counter, Digital Frequency Divider, Programmable Sequence Controller, Instrumentation Event Counter, Power Supply and Motor Drive, Educational Timing and Counter Module.

🏭

Industrial Decade Counter

The CD4510BPW fits industrial decade-counting modules because it combines a 4-bit BCD count register with selectable up or down counting and dedicated carry or borrow outputs. Its 3 V to 18 V supply range accommodates common industrial logic levels, while the -55 °C to 125 °C rating supports a broad range of operating environments. Cascading the device with additional stages allows a counter to track decimal units, tens, and higher positions. The clock-enable and load inputs also permit event gating and repeatable initialization. Layout should keep clock traces short and place the supply bypass capacitor directly beside the device.

🔧

Digital Frequency Divider

The CD4510BPW can divide an incoming event stream when a downstream circuit requires a reduced count rate or a fixed-count completion pulse. The positive-edge clock input accepts the source signal, and the clock-enable input provides a clean way to pause counting without changing the preset value. Because the counter supports parallel loading and reset, it can restart a measurement cycle after a terminal carry or borrow event. Designers should establish the intended output decode convention in firmware or logic and verify the timing relationships between clock, enable, load, and reset in the manufacturer datasheet.

🖥️

Programmable Sequence Controller

The CD4510BPW is useful in compact sequence controllers that must advance or retreat through preset count states. A controller can load an initial BCD value, enable counting for a defined interval, and use the carry or borrow output to update another part of the system. This hardware-assisted counting reduces the number of operations required from a general-purpose microcontroller while retaining deterministic CMOS logic behavior. A microcontroller remains appropriate for complex sequencing, while the counter handles the deterministic state transition. The reset and load controls must receive defined levels during initialization to prevent an unintended count.

🧩

Instrumentation Event Counter

The CD4510BPW supports event-counting front ends in digital instrumentation where pulses from a sensor or detector must be accumulated and interpreted in decimal increments. The 4-bit BCD register provides a direct representation of a decade digit, while carry and borrow outputs permit extension to multiple digits. Its operating temperature range of -55 °C to 125 °C makes it suitable for demanding industrial instrumentation. The input pulse source must meet the device's voltage and timing requirements, and a Schmitt-trigger stage may be useful when the source signal has slow edges. Firmware can read a preset or transferred count for display.

⚡

Power Supply and Motor Drive

The CD4510BPW can support supervisory counting in power-supply or motor-drive systems where successive operating events must be accumulated. The 3 V to 18 V supply range can interface with suitable control logic, and the independent load, reset, and direction inputs allow a system controller to define repeatable operating intervals. Carry and borrow outputs are particularly useful when the counter must track a multi-stage sequence. Protection and level translation remain necessary if the surrounding system uses different voltage domains. Timing coordination is essential because the counter should not receive asynchronous control changes during an active clock edge.

🔧

Educational Timing and Counter Module

The CD4510BPW provides a practical platform for learning synchronous counting, preset loading, and carry propagation because several functional blocks are accessible at the package pins. A trainer can connect switches to the parallel data inputs, generate controlled clock pulses, and observe the four BCD outputs while changing the direction and enable controls. The 16-TSSOP package keeps the demonstration board compact while retaining accessible signal routing. For reliable demonstrations, every input must be driven to a defined logic level and the supply rails must be decoupled. The manufacturer pin-description table should be used for every classroom wiring exercise.

What is the CD4510BPW?
The CD4510BPW is a 4-bit CMOS presettable BCD up/down counter that operates from 3 V to 18 V and is packaged in a 16-lead TSSOP. According to the Texas Instruments CD4510B manufacturer datasheet, it combines parallel loading, reversible counting, clock enable, reset, and carry or borrow outputs for decade-oriented digital systems.
What are the key specifications of CD4510BPW?
The CD4510BPW provides a 4-bit BCD count register, positive-edge clocking, selectable up or down counting, and operation across a 3 V to 18 V supply range. The Texas Instruments CD4510B manufacturer datasheet identifies a 16-lead TSSOP package and an operating temperature range of -55 °C to 125 °C for this military-temperature-grade ordering variant.
Where can I download the CD4510BPW datasheet PDF?
The CD4510BPW datasheet and ordering information are available from the Texas Instruments CD4510B product page at https://www.ti.com/product/CD4510B. That page links to the manufacturer datasheet, package variants, parameter information, and quality documentation. Use the CD4510B datasheet because CD4510BPW is the 16-lead TSSOP ordering variant of that device family.
Where is the CD4510BPW pinout located?
The CD4510BPW pinout is shown in the Texas Instruments CD4510B manufacturer datasheet and uses the standard 16-lead TSSOP arrangement. The device provides clock, clock enable, load, reset, direction, carry, borrow, four count outputs, and the supply pins. Assign PCB tracks directly from the manufacturer pin-description table rather than relying only on a generic package drawing.
How do I set the count direction on the CD4510BPW?
The CD4510BPW selects its count direction with the U/D input before the next active clock edge. According to the Texas Instruments CD4510B manufacturer datasheet, the logic state at this control determines whether the BCD count advances or retreats. Keep the direction signal stable around each rising clock edge to prevent an unintended count sequence.
Can CD4510BPW replace CD4510BPWR without PCB changes?
Yes, CD4510BPWR is a pin-compatible 16-TSSOP ordering variant that can replace CD4510BPW electrically without changing the PCB footprint. The principal practical difference is the shipment format: CD4510BPWR is supplied for tape-and-reel handling, while CD4510BPW uses the non-reel ordering format. Confirm the required assembly and purchasing format before substitution.
Is CD4510BPWG4 a drop-in alternative to CD4510BPW?
Yes, CD4510BPWG4 is a same-package 16-TSSOP alternative with the same 4-bit BCD up/down-counter function, 3 V to 18 V supply range, and -55 °C to 125 °C operating range. The Texas Instruments ordering information identifies the G4 designation as the lead-free finish option, so the functional and pin compatibility remain unchanged.
When should I choose CD4510BPW over a microcontroller-based counter?
Choose the CD4510BPW when the required function is straightforward reversible BCD counting with preset, clock-enable, carry, and borrow behavior. It can reduce firmware and external logic in simple decade counters. Use a microcontroller when programmable algorithms, event buffering, display formatting, communications, or complex fault handling are required.
Is CD4510BPW suitable for cascaded decimal counting?
Yes, the CD4510BPW is suitable for cascaded decimal counting because its carry and borrow outputs can link successive counting stages. According to the Texas Instruments CD4510B manufacturer datasheet, each stage retains independent preset, reset, clock-enable, and direction control. Verify the required carry and borrow polarity when arranging the stages in a PCB design.
How should the CD4510BPW supply bypass be arranged?
Place the supply bypass capacitor as close as practical to the CD4510BPW VDD and VSS pins, with a short and low-inductance return path. The Texas Instruments CD4510B manufacturer datasheet should be consulted for the recommended decoupling value and layout. Avoid routing the clock beside long switching-current paths to reduce coupling into the count sequence.
What is the lead time for CD4510BPW?
The current production and delivery lead time should be requested through the Request a Quote form on this page. The Texas Instruments CD4510B product page provides the authoritative device and package status, while current channel lead times can change with inventory and order quantity. Confirm the complete MPN, CD4510BPW, with the order form.
Is CD4510BPW in stock?
CD4510BPW inventory should be checked through the Request a Quote form on this page, where the exact ordering variant can be matched to the required quantity and delivery schedule. The CD4510BPW listing identifies an in-stock status at one distribution channel, but channel inventory can change rapidly. XAIPART can confirm current stock against the requested quantity.
What is the price of CD4510BPW?
Use the Request a Quote form on this page for the current CD4510BPW unit price and volume breaks. Pricing depends on order quantity, delivery date, and package format, so a static figure can become obsolete. The form accepts the exact MPN and provides a quotation tied to the requested procurement quantity.
Where can I buy CD4510BPW online?
Submit a purchase request through the Request a Quote form on this page to obtain current CD4510BPB availability, commercial terms, and delivery scheduling. Specify the exact CD4510BPW ordering code and required quantity so the quotation reflects the correct 16-TSSOP variant. XAIPART will return the quotation through its normal sales workflow.
What is the best Nexperia equivalent for CD4510BPW?
The appropriate cross-brand equivalent must be confirmed from an exact pin-and-parameter comparison before it is treated as a drop-in replacement. No specific Nexperia MPN is established by the CD4510BPW manufacturer information, so assigning one would risk incorrect logic polarity, terminal function, or supply behavior. Use the manufacturer pin table and operating limits for CD4510BPW when evaluating any candidate.
CD4510BPW vs CD4510BPWR - which is better for PCB assembly?
CD4510BPW and CD4510BPWR share the same 16-TSSOP footprint and counter function, so the better choice depends primarily on assembly logistics. CD4510BPWR is identified as the tape-and-reel ordering option for automated placement, whereas CD4510BPW is the non-reel ordering format. Both provide a 4-bit BCD up/down counter over a 3 V to 18 V supply range.
What can replace CD4510BPW?
CD4510BPWR and CD4510BPWG4 are confirmed pin-compatible 16-TSSOP replacements for CD4510BPW. The first changes the shipment format for tape-and-reel assembly, while the second changes the lead-free finish designation without changing the counter function. Cross-brand replacements require a separate terminal-by-terminal and timing verification before use.

נתוני עזר הנדסיים עבור CD4510BPW — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose CD4510BPW when a design requires a compact, reversible 4-bit BCD counter with parallel loading, clock enable, reset, and carry or borrow functions across a 3 V to 18 V supply. Select CD4510BPWR when the assembly line uses tape-and-reel feeding but the electrical design and PCB footprint remain unchanged. Select CD4510BPWG4 when the lead-free finish designation is required for procurement or environmental documentation. A general-purpose counter such as SN74LS90DR serves a different use case involving binary and decade counting modes rather than this part's dedicated reversible BCD behavior. Before choosing a cross-brand alternative, require an exact terminal-function, logic-polarity, supply-voltage, and timing comparison; similar counter descriptions alone do not establish drop-in compatibility.

השוואה עם חלופות

פרמטר מוצר זה CD4510BPWR CD4510BPWG4
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-TSSOP 16-TSSOP 16-TSSOP
Counter Type 4-bit BCD presettable up/down counter 4-bit BCD presettable up/down counter 4-bit BCD presettable up/down counter
Counting Bits 4 bits 4 bits 4 bits
Supply Voltage Range 3 V to 18 V 3 V to 18 V 3 V to 18 V
Operating Temperature Range -55 °C to 125 °C -55 °C to 125 °C -55 °C to 125 °C
Ordering Distinction CD4510BPW non-reel ordering format Tape-and-reel ordering format G4 lead-free finish

מבדילים עיקריים

  • Complete reversible BCD counting in one logic device (לעומתSN74LS90DR)
  • Wide CMOS supply range (לעומתCD4510BPWR)
  • Military temperature capability (לעומתCD4510BPWG4)

הערות תכנון

Place the VDD bypass capacitor directly beside the CD4510BPW supply and ground pins, and keep the current return path short. Route the clock and control inputs away from switching-node and high-current traces. The 16-lead TSSOP has closely spaced leads, so inspect the assembled joints for bridging and verify the PCB land pattern against the manufacturer package drawing before release.

Hold clock, load, reset, and direction inputs stable around the active clock edge. If the source signal has slow transitions or substantial ringing, add an appropriate conditioning stage rather than relying on the counter input as a general-purpose Schmitt trigger. For cascaded counting, route carry and borrow between neighboring devices while keeping the clock distribution orderly and electrically consistent.

Do not interchange load and reset behavior or assume every unused control can float. Establish defined logic levels during power-up and verify the reset priority, count direction, load timing, and terminal count behavior in the Texas Instruments CD4510B manufacturer datasheet. These checks are especially important when replacing CD4510BPW with another ordering variant or designing a new multistage decimal counter.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The CD4510BPWG4 G4 ordering code identifies a lead-free finish option, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations are not established for CD4510BPW by the manufacturer information listed here.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

CD4510BPW CD4510BPW datasheet CD4510BPW pinout CD4510BPW datasheet pdf CD4510BPW replacement CD4510BPW equivalent CD4510BPW 16-TSSOP CD4510BPW up down counter CD4510BPW vs CD4510BPWR CD4510BPW application circuit Texas Instruments CD4510BPW CD4510BPW price CD4510BPW stock CD4510BPW footprint

רכיבים ומונחים קשורים

Texas Instruments CD4510BPW CD4510BPWR CD4510BPWG4 SN74LS90DR SN74LS93DR CMOS CD4000-series BCD counter up/down counter presettable counter parallel counter logic IC digital counter positive-edge clock clock enable carry output borrow output 16-TSSOP TSSOP package family surface-mount technology decimal counting frequency division industrial control digital instrumentation
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר