Infineon

CY8C27443-24SXI - 24MHz PSoC 1 MCU | Infineon Technologies

Référence : CY8C27443-24SXI ✓ Actif
3 V Vdss 28-pin SOIC Package 24 MHz Speed 16 KB Memory
MOQ : 1 |

CY8C27443-24SXI Présentation

Infineon Technologies CY8C27443-24SXI is an 8-bit PSoC 1 mixed-signal microcontroller with an M8C CPU operating up to 24 MHz, 16 KB of flash memory, 256 B of SRAM, and a 28-pin SOIC package. It is intended for industrial control applications requiring programmable digital and analog resources in a compact embedded package.

A PSoC, or Programmable System-on-Chip, is a mixed-signal microcontroller architecture that combines a CPU core with configurable analog and digital peripheral blocks. In the system hierarchy, PSoC 1 belongs to the microcontroller and embedded-processing category, where configurable input, output, timing, and analog functions can reduce the number of discrete components needed around a conventional MCU.

The CY8C27443-24SXI provides eight programmable digital blocks and 24 GPIOs, allowing designers to tailor input capture, output, interrupt-driven control, and communication functions. Its 16 KB flash stores firmware, while 256 B of SRAM supports working variables and stack operations. The 24 MHz M8C CPU provides substantially more processing headroom than typical low-clock 8-bit control devices without requiring a larger 16- or 32-bit processor.

The device operates from 3 V to 5.25 V, supporting both 3.3 V and 5 V system rails. Configurable analog and digital routing is central to the PSoC value proposition: sensor signals, control outputs, timing functions, and general-purpose I/O can be assigned through the device's programmable architecture rather than fixed solely by dedicated pins.

Typical uses include industrial temperature controllers, compact instrumentation panels, sensor-interface modules, motor and actuator control, small appliance controls, and mixed-signal products requiring both digital processing and analog signal handling. The 28-pin SOIC format also fits conventional industrial PCB assembly processes.

Designers should verify the exact pin functions, available analog resources, clocking configuration, programming method, and peripheral mapping in the manufacturer datasheet before finalizing PCB routing. Firmware migration is generally simplest when the replacement part retains the same silicon family, flash organization, clock rating, package, and industrial temperature designation.

This page organizes the principal device characteristics, verified sourcing references, compatible family options, and application guidance into one engineering-focused resource for designers evaluating the CY8C27443-24SXI for compact mixed-signal control systems.

Alternatives de remplacement direct pour CY8C27443-24SXI — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec CY8C27443-24SXI (même facteur de forme et même empreinte) — différant par Package, Flash Memory, Product Type, Programmable Digital Blocks, SRAM.

Infineon
Package: 28-SOIC (SOP-28)
Flash Memory: 8 KB (8K x 8)
Programmable Digital Blocks: 4
Comparer avec CY8C27443-24SXI →
Infineon
Package: 28-SOIC
Flash Memory: 16 KB (16K x 8)
Product Type: 8-bit M8C PSOC 1 CY8C26xxx microcontroller
Comparer avec CY8C27443-24SXI →
Infineon
Flash Memory: 16 KB (16K x 8 bytes)
Product Type: 8-bit PSoC 1 programmable system-on-chip microcontroller
SRAM: 256 bytes
Comparer avec CY8C27443-24SXI →
Infineon
Package: 28-SOIC (300 mil)
Programmable Digital Blocks: 16
SRAM: 2 KB
Comparer avec CY8C27443-24SXI →

CY8C27443-24PXI

✅ Remplacement direct
Infineon
📦 28-SOIC
8-bit PSoC 1 programmable system-on-chip microcontroller · M8C, 8-bit · 24 MHz · 16 KB (16K x 8 bytes) · 256 bytes · 24 GPIO · 3.0 V to 5.25 V · 28-pin through-hole DIP

Contactez-nous pour le prix

Voir la fiche technique →

CY8C27443-24PI

✅ Remplacement direct
📦 28-SOIC
Same CY8C27443 family and core memory configuration; the 24PI ordering code differs from 24SXI by 0% in CPU, flash, and SRAM ratings, with suffix-dependent qualification to verify.

📋 Alternative de référence (hors catalogue)

CY8C27443-24SXIT

✅ Remplacement direct
📦 28-SOIC
Same CY8C27443 family, 24 MHz M8C CPU, 16 KB flash, and 256 B SRAM; the T ordering suffix changes packing rather than the core electrical ratings.

📋 Alternative de référence (hors catalogue)

CY8C27443-24SXI Valeurs maximales et caractéristiques électriques

Product Type PSoC 1 mixed-signal microcontroller
CPU Core M8C 8-bit core
Maximum CPU Frequency 24 MHz
Flash Memory 16 KB
Flash Organization 16K x 8 bits
SRAM 256 B
Number of GPIOs 24
Programmable Digital Blocks 8
Minimum Operating Voltage 3 V
Maximum Operating Voltage 5.25 V
Boîtier 28-pin SOIC
Package Type SOIC
Type de montage Surface mount
Application Segment Industrial control

Guide de configuration des broches du CY8C27443-24SXI soic

Configuration des broches du CY8C27443-24SXI (boîtier soic). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier soic pour le CY8C27443-24SXI

Aucune donnée de brochage détaillée disponible pour CY8C27443-24SXI.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

CY8C27443-24SXI convient pour 6 applications: Industrial Temperature Controller, Sensor Signal Interface, Compact Motor and Actuator Control, Programmable Logic Controller, Precision Measurement Instrument, Smart Appliance Controller.

🏭

Industrial Temperature Controller

The CY8C27443-24SXI fits compact temperature-control equipment because its 24 MHz M8C CPU can execute acquisition, filtering, control logic, and user-interface tasks while eight programmable digital blocks support timing and output functions. The 24 GPIOs provide sufficient parallel I/O for switches, indicators, heaters, relays, and interface signals, while 256 B of SRAM accommodates working variables. Operating from 3 V to 5.25 V supports 3.3 V and 5 V industrial designs. Place the MCU in the 28-SOIC footprint specified by the manufacturer and configure unused pins for the intended analog or digital behavior before final PCB sign-off.

🧩

Sensor Signal Interface

The CY8C27443-24SXI is appropriate for small sensor-interface modules because PSoC 1 combines an M8C processor with configurable mixed-signal resources instead of limiting the design to a fixed digital peripheral set. Its 24 GPIOs can support sensor enables, data capture, fault signals, and communications, while the 24 MHz clock rate supports sampling control and local filtering. The 3 V to 5.25 V supply range allows operation from common industrial rails. Designers should consult the manufacturer pin table and configuration guide to select analog pins, external sensing components, and routing carefully; the 28-SOIC package keeps the controller compact without requiring a fine-pitch BGA footprint.

🔧

Compact Motor and Actuator Control

The CY8C27443-24SXI can serve as the control processor in compact motor and actuator modules where eight programmable digital blocks, 24 GPIOs, and a 24 MHz M8C CPU are useful for pulse timing, direction control, limit inputs, and status reporting. Its 256 B of SRAM supports small control tasks, and the 3 V to 5.25 V operating range accommodates 3.3 V logic. The 28-SOIC package is suitable for conventional surface-mount assembly and provides straightforward routing to external drivers. Firmware and pin assignment must be validated against the selected actuator topology, and protection components should be sized independently from the MCU ratings.

🏭

Programmable Logic Controller

The CY8C27443-24SXI is well matched to small programmable logic controllers because configurable PSoC peripherals can implement timing, input capture, output compare, interrupts, and communication functions around a familiar 8-bit processor. Its 24 GPIOs support numerous field inputs and outputs, while the 16 KB flash accommodates a structured PLC application and 256 B SRAM provides working storage. The device operates at 3 V to 5.25 V and mounts in a 28-SOIC package. For industrial reliability, confirm the selected suffix's temperature range and qualification status, validate isolation boundaries, and keep high-energy field wiring physically separated from sensitive analog and microcontroller traces.

📺

Precision Measurement Instrument

The CY8C27443-24SXI can control a compact measurement instrument where sensor conditioning, calibration tables, display updates, and communications must share one embedded platform. Its 24 MHz M8C CPU provides useful processing capacity, and eight programmable digital blocks can support timing or event-driven functions without consuming every GPIO. The 3 V to 5.25 V range permits direct use with common 3.3 V and 5 V analog front ends, subject to pin-level limits. For high-accuracy conversion, an external precision ADC such as the ADS1262IPW may provide more resolution than the integrated resources, while the PSoC manages configuration, compensation, and data handling.

📱

Smart Appliance Controller

The CY8C27443-24SXI supports smart appliance controls that combine user inputs, relays, displays, sensors, and safety-related state monitoring in a small controller. Its 24 GPIOs can connect to buttons, indicators, and driver-control signals, while configurable digital blocks assist with periodic timing and interrupt handling. The 16 KB flash and 256 B SRAM fit compact embedded logic, and the 3 V to 5.25 V range supports common appliance rails. The 28-SOIC package offers a practical assembly option for cost-sensitive control boards. Production design should separate mains-connected switching stages from the MCU domain and verify all timing, reset, and brownout behavior against the appliance specification.

What are the key specifications of CY8C27443-24SXI that engineers should know?
The CY8C27443-24SXI is an 8-bit PSoC 1 mixed-signal MCU with a 24 MHz M8C CPU, 16 KB flash, 256 B SRAM, 24 GPIOs, and eight programmable digital blocks. According to the Infineon Technologies product page, the device is packaged as 28-SOIC for industrial control. Its 3 V to 5.25 V operating range supports 3.3 V and 5 V equipment designs.
Where can I download the CY8C27443 datasheet PDF?
The official CY8C27443 datasheet PDF can be reached from the Infineon Technologies product page for CY8C27443-24SXI. The manufacturer page provides datasheet, parameters, and ordering information. Use the manufacturer PDF for authoritative pin descriptions, timing limits, electrical characteristics, programming details, and package drawings, and avoid relying on secondary summaries for production design sign-off.
Where can I find the CY8C27443 pinout and package information?
The CY8C27443 pinout is documented in the manufacturer's CY8C27443 datasheet under the pin-description and package sections. The CY8C27443-24SXI uses a 28-pin SOIC package. Assign PCB tracks from the official pin-description table because PSoC peripheral functions can be routed internally and a fixed peripheral assumption may not match the programmed configuration.
What programmer is compatible with the CY8C27443?
The CY8C27443 is programmed through a Cypress/Infineon PSoC programming solution that supports the M8C PSoC 1 family. The exact supported programmer, adapter, and programming software should be confirmed against the current Infineon device-support list. When replacing an existing programmed design, also verify that the selected tool can retain or recreate the required boot, configuration, and user flash contents.
Is CY8C27443-24SXI suitable for industrial control applications?
Yes, the CY8C27443-24SXI is identified by Infineon Technologies for industrial control and combines a 24 MHz M8C CPU with programmable mixed-signal resources. Its 3 V to 5.25 V range and 24 GPIOs suit embedded controllers, sensor interfaces, and compact actuator systems. Confirm the exact temperature limits and qualification details for the deployed industrial environment before production release.
What can replace the CY8C27443-24SXI?
The closest documented replacements are the CY8C27443-24PXI, CY8C27443-24PI, and CY8C27443-24SXIT family variants. A valid drop-in choice must preserve the 28-SOIC footprint, 24 MHz CPU limit, 16 KB flash, 256 B SRAM, pin functions, and required industrial temperature range. Confirm ordering-code meanings and PCB compatibility before substitution.
What is the best Infineon Technologies equivalent for CY8C27443-24SXI?
The best-supported equivalent family option is CY8C27443-24PXI because it belongs to the same CY8C27443 PSoC 1 silicon family and is listed as an alternative to the target. The essential comparison is the same 28-SOIC footprint and identical core, flash, SRAM, and peripheral architecture. Review temperature-grade and ordering-code differences in the manufacturer documentation before approving a direct substitution.
What is the difference between CY8C27443-24SXI and CY8C27443-24PXI?
The CY8C27443-24SXI and CY8C27443-24PXI are members of the same CY8C27443 PSoC 1 family with a 24 MHz M8C CPU, 16 KB flash, 256 B SRAM, and eight programmable digital blocks. Their documented cross-reference relationship makes the PXI version the leading same-family candidate, but the ordering suffix must be reviewed for package, temperature, and qualification differences before it is treated as a drop-in replacement.
Is CY8C27443-24SXI the same as CY8C27443-24PI?
The CY8C27443-24PI is a documented alternative in the CY8C27443 family and shares the device's 24 MHz M8C architecture and core memory resources. It is not automatically interchangeable with the CY8C27443-24SXI: verify the exact 28-SOIC pin configuration, operating-temperature grade, qualification status, and orderable package suffix in the manufacturer documentation before substituting it.
When should I choose CY8C27443-24SXI over CY8C27443-24SXIT?
Choose the CY8C27443-24SXI when the standard industrial ordering configuration matches the required temperature grade, package, and procurement format. Consider CY8C27443-24SXIT only when its documented temperature and packing code are required for the assembly process. The core architecture is closely related, but the suffix must be checked for qualification and orderable-part differences rather than treated as interchangeable by name alone.
Where to buy CY8C27443-24SXI online?
Use the Request a Quote form on this page to request CY8C27443-24SXI availability, lead time, and a formal quotation. The manufacturer product page confirms the exact orderable MPN, while current procurement status should be confirmed through the quote process. Specify the required quantity, shipping destination, and whether reel, tray, tube, or bulk packing is needed.
What is the price of CY8C27443-24SXI?
CY8C27443-24SXI pricing depends on quantity, procurement terms, market conditions, and the requested package format. Request a current quotation through the Request a Quote form on this page. The structured pricing fields update separately from technical documentation, so the quotation is the appropriate source for transaction-specific pricing, minimum order quantity, and delivery terms.
What is the lead time for CY8C27443-24SXI?
Current CY8C27443-24SXI lead time must be confirmed for the requested quantity through the Request a Quote form on this page. Lead time can change with factory inventory, allocation, package format, and order volume. Providing a forecast quantity and target delivery date helps the sourcing team return a more useful schedule and commercial proposal.
Is CY8C27443-24SXI in stock?
Stock availability for CY8C27443-24SXI should be confirmed through the Request a Quote form on this page because inventory and lead time change with order volume. Include the required quantity, package format, and target shipment date. For production planning, request a dated supply response rather than relying on a general catalog-stock indication.
What are the power, package, and compliance considerations for CY8C27443-24SXI?
The CY8C27443-24SXI operates from 3 V to 5.25 V and is supplied in a surface-mount 28-SOIC package for industrial control. Its 24 MHz M8C CPU and 16 KB flash support responsive embedded control without a larger processor. Exact power consumption, temperature limits, and compliance declarations should be taken from the manufacturer datasheet and product documentation for the selected ordering code.

Données de référence d'ingénierie pour CY8C27443-24SXI — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the CY8C27443-24SXI for compact mixed-signal industrial controls that need an 8-bit M8C CPU, programmable digital blocks, 24 GPIOs, and a 28-SOIC footprint. Its 24 MHz clock, 16 KB flash, and 256 B SRAM are sufficient for many embedded control and instrumentation tasks without moving to a larger processor. Consider CY8C27443-24PXI when its specific ordering and qualification code better matches the design, and verify every electrical and temperature-related suffix before substitution. CY8C27443-24PI offers another same-family option, but its exact ordering-code attributes must match the operating environment. Use CY8C27443-24SXIT when its packing code is required for the assembly method. No verified cross-brand drop-in equivalent was established, so a cross-manufacturer change should be treated as a redesign rather than a confirmed PCB replacement.

Comparaison avec les alternatives

Paramètre Ce produit CY8C27443-24PXI CY8C27443-24PI CY8C27443-24SXIT
Package 28-SOIC 28-SOIC 28-SOIC 28-SOIC
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
CPU Core M8C 8-bit M8C 8-bit M8C 8-bit M8C 8-bit
Maximum CPU Frequency 24 MHz 24 MHz 24 MHz 24 MHz
Flash Memory 16 KB 16 KB 16 KB 16 KB
SRAM 256 B 256 B 256 B 256 B
Number of GPIOs 24 24 24 24
Programmable Digital Blocks 8 8 8 8
Operating Voltage Range 3 V to 5.25 V 3 V to 5.25 V 3 V to 5.25 V 3 V to 5.25 V

Principaux différenciateurs

  • Integrated programmable mixed-signal architecture (vs CY8C27443-24PXI)
  • Compact 8-bit processing with deterministic peripheral resources (vs CY8C27443-24PI)
  • Wide compatibility with common logic rails (vs CY8C27443-24SXIT)

Notes de conception

Route the 28-SOIC footprint directly from the manufacturer pin-description table and preserve access to programming and debugging signals. Because PSoC peripherals can be routed internally, do not assign analog or digital functions solely from package position. Keep decoupling close to the power pins, use a stable ground reference for analog measurements, and separate switching-node or relay traces from sensitive sensor inputs.

Treat analog and digital PSoC pins according to the datasheet pin description and application guidance. If an external ADC or precision sensor is used, provide a quiet local ground region, short return paths, and controlled input filtering. Avoid routing high-current actuator outputs beneath the MCU or analog network because shared return paths can create supply noise and measurement errors even when the MCU itself operates correctly.

Do not assume that a related ordering suffix is automatically interchangeable. Confirm the package, temperature range, qualification, and packing code for CY8C27443-24PXI, CY8C27443-24PI, or CY8C27443-24SXIT. When reusing firmware, verify the boot configuration, clock setup, flash organization, SRAM assumptions, and peripheral mapping against the exact replacement part's manufacturer documentation.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer product page identifies the device for industrial control but the supplied technical references do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

cy8c27443 datasheet cy8c27443 programmer cy8c27443 datasheet pdf CY8C27443-24SXI datasheet CY8C27443-24SXI pinout CY8C27443-24SXI equivalent CY8C27443-24SXI replacement CY8C27443-24SXI vs CY8C27443-24PXI CY8C27443-24SXI programmer Infineon CY8C27443-24SXI

Composants & termes associés

Infineon Technologies CY8C27443-24SXI CY8C27443-24PXI CY8C27443-24PI CY8C27443-24SXIT PSoC 1 Programmable System-on-Chip M8C CPU 8-bit microcontroller mixed-signal microcontroller embedded microcontroller 24 MHz 16 KB flash 256 B SRAM programmable digital block configurable analog peripheral 28-SOIC SOIC package family surface-mount technology industrial control sensor interface programmable logic controller mixed-signal embedded system GPIO Cypress PSoC programming tool
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ