Infineon

CY8C3444LTI-113 8-Bit 16KB Flash PSoC 3 | Infineon

Référence : CY8C3444LTI-113 ✓ Actif
68-VFQFN with exposed pad Package 16 KB flash Memory
MOQ : 1 |

CY8C3444LTI-113 Présentation

The Infineon CY8C3444LTI-113 is an 8-bit programmable system-on-chip, or PSoC, in a 68-VFQFN package with an exposed pad. The device is identified as an IC MCU with 16 KB of embedded flash and belongs to the CY8C34 family of mixed-signal microcontrollers. Its combination of an 8051-compatible processing core, programmable digital and analog resources, and a compact surface-mount package supports embedded control designs where peripheral integration matters.

A PSoC is a mixed-signal microcontroller that combines a CPU with programmable digital blocks, analog-to-digital converters, digital-to-analog converters, comparators, timers, and communication peripherals on one integrated device. This device hierarchy—PSoC to mixed-signal microcontroller to embedded processor to semiconductor—allows designers to consolidate functions that would otherwise require a discrete MCU and several supporting ICs.

Confirmed headline features include 8-bit processing, 16 KB of flash memory, a 68-VFQFN exposed-pad package, and an integrated microcontroller architecture. The CY8C34 family also provides programmable system resources for sensing, control, and communications. Because the exact clock rating, SRAM capacity, analog conversion performance, GPIO count, and electrical limits for this specific suffix are not stated in the product-page excerpts, engineers should confirm those values in the manufacturer datasheet before finalizing clock, memory, and peripheral assignments.

The exposed thermal pad provides a heat-spreading connection between the device and the PCB. Its effectiveness depends on the pad being soldered according to the land pattern and connected through thermal-via arrays to an adequate copper area. Package selection alone does not guarantee equivalent performance between devices in different QFN forms, so mechanical drawings, pin assignment, and exposed-pad dimensions must be checked before substitution.

Typical uses for the CY8C3444LTI-113 include compact industrial controls, touch-capacitive interface controllers, sensor-conditioning systems, consumer accessories, and embedded communication modules. The programmable mixed-signal architecture is particularly useful when a design needs several sensing and control functions but does not justify a larger microcontroller or discrete analog implementation.

Design should begin with the manufacturer pin-description table and reference design guidance. Confirm the exposed-pad connection, supply pins, decoupling requirements, programming interface, and unused GPIO states before routing the board. Also validate the memory map, interrupt structure, peripheral clocking, and analog operating conditions against the exact CY8C3444LTI-113 ordering information.

This product page consolidates the confirmed device identity, package form, memory configuration, programming support, drop-in options, and practical design considerations. It also distinguishes confirmed ordering information from electrical details that still require direct confirmation against the manufacturer documentation.

Alternatives de remplacement direct pour CY8C3444LTI-113 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec CY8C3444LTI-113 (même facteur de forme et même empreinte) — différant par CPU Architecture, Package, Program Memory.

Infineon
CPU Architecture: 8051, 8-bit
Package: 68-QFN (8 mm x 8 mm)
Program Memory: 16 KB Flash (16K x 8)
Comparer avec CY8C3444LTI-113 →

CY8C3444LTI-111

✅ Remplacement direct
Infineon
📦 68-VFQFN with exposed pad
Flash-programmable system-on-chip (PSoC 3) · 8051, 8-bit · 50 MHz · 16 KB Flash (16K x 8) · 2 kByte · PSoC 3 CY8C34 family · 68-QFN (8 mm x 8 mm) · HVQCCN

Contactez-nous pour le prix

Voir la fiche technique →

CY8C3444LTI-119T

✅ Remplacement direct
📦 68-VFQFN with exposed pad
Same CY8C3444 PSoC 3 family, 16 KB flash, and 68-VFQFN form; -119T ordering code has a different grade suffix from -113

📋 Alternative de référence (hors catalogue)

CY8C3444LTI-115

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 68-VFQFN with exposed pad
Same CY8C3444 family and 68-VFQFN footprint; grade suffix differs by 2 from -113, making temperature or speed classification the key distinction

📋 Alternative de référence (hors catalogue)

CY8C3444LTI-117

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 68-VFQFN with exposed pad
Same CY8C3444 family and 68-VFQFN footprint; grade suffix differs by 4 from -113, making temperature or speed classification the key distinction

📋 Alternative de référence (hors catalogue)

CY8C3444LTI-113 Valeurs maximales et caractéristiques électriques

Device Type 8-bit programmable system-on-chip (PSoC) microcontroller
Program Memory 16 KB flash
CPU Architecture 8-bit 8051-compatible core
Boîtier 68-VFQFN with exposed pad
Package Type VFQFN
Package Pin Count 68 pins
Type de montage Surface mount
Thermal Pad Exposed pad
Programming Support Supported by Elnec for QFN68 device
Statut RoHS unknown
REACH Status unknown
AEC-Q100 Status unknown

Guide de configuration des broches du CY8C3444LTI-113 68 pins

Configuration des broches du CY8C3444LTI-113 (boîtier 68 pins). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 68 pins pour le CY8C3444LTI-113

Aucune donnée de brochage détaillée disponible pour CY8C3444LTI-113.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

CY8C3444LTI-113 convient pour 6 applications: Industrial Sensor and Control Node, Touch-Capacitive User Interface, Consumer Accessory Controller, Compact Communication Module, LED Status and Lighting Controller, Instrumentation and Measurement Front End.

🏭

Industrial Sensor and Control Node

The CY8C3444LTI-113 fits compact industrial sensor nodes that need embedded control without a discrete analog and digital chipset. Its confirmed 8-bit PSoC architecture and 16 KB flash provide a processor and nonvolatile firmware storage in one device, while the programmable mixed-signal resources can reduce the need for separate conditioning components. The 68-VFQFN exposed-pad package also supports dense board layouts when its thermal pad and vias follow the manufacturer land pattern. Firmware size, peripheral allocation, temperature grade, and voltage limits should be checked against the manufacturer datasheet before deployment.

🧩

Touch-Capacitive User Interface

The CY8C3444LTI-113 can serve as the controller for a touch-capacitive keypad, slider, or compact control panel because PSoC devices combine programmable digital logic with analog sensing resources. The confirmed 8-bit architecture is appropriate for scanning inputs, applying debounce and filtering, and driving LEDs or a display. Its 16 KB flash stores application firmware and calibration constants, while the 68-VFQFN format leaves board area for the sensing electrodes and user interface. Verify the exact touch-sensing resources, ADC performance, and GPIO assignments in the manufacturer documentation.

📱

Consumer Accessory Controller

The CY8C3444LTI-113 is appropriate for a consumer accessory requiring compact embedded logic, nonvolatile firmware storage, and programmable sensing or control. Its confirmed 16 KB flash supports configuration and application code, while the 8-bit PSoC platform can implement button handling, status indication, sensor acquisition, and communication coordination in one package. The 68-VFQFN exposed-pad form is useful in space-constrained products, but thermal-via placement and exposed-pad soldering must comply with the manufacturer package drawing. Confirm grade, voltage range, and available peripheral count before releasing a production design.

🌐

Compact Communication Module

The CY8C3444LTI-113 can act as the host controller for a compact communication module that needs local configuration, protocol handling, and nonvolatile parameters. Its PSoC architecture combines an 8051-compatible 8-bit processor with programmable resources, while the confirmed 16 KB flash is suitable for firmware and configuration tables. The 68-VFQFN package provides a high pin count relative to its footprint, leaving dedicated routing options for serial links and status signals. Ethernet PHY selection and protocol requirements must be reviewed alongside the exact GPIO, timing, clock, and package constraints.

💡

LED Status and Lighting Controller

The CY8C3444LTI-113 is suitable for coordinating LED status channels, programmable indicators, or simple lighting effects in a compact embedded product. The 8-bit PSoC core can execute timing, state-machine, and button-control logic, while the programmable digital and analog resources can reduce the need for separate LED drivers. Its 16 KB flash holds firmware, lighting tables, and configuration, and the 68-VFQFN footprint provides access to a relatively large pin count. Exact timer resources, drive-current limits, temperature grade, and exposed-pad layout should be verified before implementation.

🔧

Instrumentation and Measurement Front End

The CY8C3444LTI-113 can support instrumentation front ends that combine sensor acquisition, control, calibration, and a communication interface. The PSoC mixed-signal architecture is intended for embedded signal-processing and control applications, while the confirmed 16 KB flash provides space for firmware and calibration data. Its 68-VFQFN package supports compact, high-density layouts, although analog grounding, exposed-pad return, and decoupling require careful PCB planning. Confirm ADC resolution, acquisition timing, input ranges, reference accuracy, and operating-temperature limits in the manufacturer datasheet before selecting it for precision measurement.

What is the CY8C3444LTI-113?
The CY8C3444LTI-113 is an 8-bit Infineon PSoC programmable system-on-chip with 16 KB of flash memory in a 68-VFQFN package with an exposed pad. According to the Cypress manufacturer datasheet, it combines an embedded microcontroller with programmable mixed-signal resources for compact control and sensing systems. Its primary confirmed attributes are the 8-bit architecture, 16 KB flash configuration, and 68-VFQFN package form.
How much flash memory does the CY8C3444LTI-113 contain?
The CY8C3444LTI-113 contains 16 KB of flash memory. This figure is confirmed in the Cypress manufacturer datasheet and repeated by multiple distributor product records for the exact ordering code. Flash provides nonvolatile storage for firmware, configuration data, and constants. The part's SRAM capacity should be checked separately because it is a different resource from the specified 16 KB flash.
What package does the CY8C3444LTI-113 use?
The CY8C3444LTI-113 uses a 68-VFQFN package with an exposed pad. The Cypress manufacturer datasheet identifies this package configuration for the exact MPN. The exposed pad must be connected to the PCB thermal and ground structure shown in the land pattern; it should not be treated as an optional cosmetic feature. Use the manufacturer package drawing when defining solderable pads and thermal-via geometry.
What can replace the CY8C3444LTI-113?
The CY8C3444LTI-113 can be replaced most directly by a pin-compatible CY8C3444 family device with the same 68-VFQFN footprint and compatible temperature and speed grades. CY8C3444LTI-111 is one documented same-family comparison, while CY8C3444LTI-119T is listed by Infineon as a related PSoC 3 device. Firmware, timing, grade, and exposed-pad requirements must be checked before approving either replacement.
Is CY8C3444LTI-113 the same as CY8C3444LTI-111?
The CY8C3444LTI-113 and CY8C3444LTI-111 are related CY8C3444-family devices rather than automatically identical parts. According to manufacturer family documentation, the CY8C34 family uses 8051-based processing up to 50 MHz with 16 KB of flash and 2 KB of SRAM, while the ordering suffix determines the specific grade and configuration. Verify speed, temperature, package, and qualification differences before interchangeability is assumed.
What is the best Infineon equivalent for the CY8C3444LTI-113?
The best Infineon equivalent is the same-family CY8C3444 ordering code that matches the target's 68-VFQFN package, temperature grade, and operating-speed suffix. CY8C3444LTI-119T is an Infineon-listed related PSoC 3 member, but its ordering suffix must be checked for grade differences. For a guaranteed drop-in decision, compare the ordering table, pin descriptions, exposed-pad connection, and device revision status in the manufacturer documentation.
When should I choose the CY8C3444LTI-113 over another PSoC 3 device?
Choose the CY8C3444LTI-113 when the design requires the exact 16 KB flash configuration, 8-bit PSoC 3 architecture, and 68-VFQFN exposed-pad footprint. It is preferable to a related suffix only when the selected alternative matches all ordering, electrical, timing, and qualification requirements. For new designs, confirm programming support, peripheral resources, pin multiplexing, and package thermal requirements against the manufacturer documentation.
Is the CY8C3444LTI-113 suitable for industrial control applications?
The CY8C3444LTI-113 is suitable for compact embedded-control designs when its confirmed resources satisfy the application. Its 8-bit PSoC architecture, 16 KB flash, and 68-VFQFN package support space-constrained sensing and control products. Industrial suitability still depends on the temperature grade, operating voltage, clock behavior, and qualification status encoded by the exact ordering code, which should be confirmed in the manufacturer datasheet.
Where can I download the CY8C3444LTI-113 datasheet PDF?
The CY8C3444LTI-113 datasheet is available through the Cypress manufacturer documentation link on this page and from the manufacturer product documentation for the CY8C34 family. The linked copy contains the pin-description table, electrical characteristics, memory information, package drawings, and ordering information needed for design review. Always use the ordering table to confirm that the details apply to the exact LTI-113 suffix.
Where can I find the CY8C3444LTI-113 pinout?
The CY8C3444LTI-113 pinout is in the pin-description table and package drawing of the Cypress manufacturer datasheet. The device uses a 68-VFQFN with an exposed pad, so the exposed pad and all numbered terminals must be considered during layout. Do not infer pad numbering from a generic QFN drawing; assign tracks from the exact manufacturer pin table and verify the orientation marker.
How do I program the CY8C3444LTI-113?
The CY8C3444LTI-113 is supported by Elnec device programmers for the QFN68 configuration. Programming also depends on the Cypress programming tool, boot or programming interface, bootload logic, and the voltage levels used by the selected adapter. Follow the manufacturer programming guide for signal sequencing, clock requirements, and connector pinout, and verify the complete package orientation before placing it in a fixture.
Where can I buy CY8C3444LTI-113 online?
Use the Request a Quote form on this page to inquire about the CY8C3444LTI-113, current inventory, order quantity, and delivery timing. The exact device is listed in stock by one component supplier, while another listing states that lead time must be confirmed. A quote request is the appropriate way to establish current commercial availability and a delivery schedule for the exact MPN.
What is the price of the CY8C3444LTI-113?
Current pricing for the CY8C3444LTI-113 should be requested through the Request a Quote form on this page. The component supplier listing identifies the exact MPN and shows 3,424 pieces in stock, but it presents the unit price as quote-based rather than as a published numerical amount. The form allows the required quantity, package form, and shipment requirements to be reviewed for a current quotation.
What is the lead time for CY8C3444LTI-113?
The lead time for the CY8C3444LTI-113 must be confirmed when a purchase order is placed. One listing states that the lead time is to be confirmed, while also displaying an estimated delivery window of October 17 through October 22. Because that window can change, submit the exact MPN and required quantity through the Request a Quote form on this page for a current schedule.
Is CY8C3444LTI-113 in stock?
The CY8C3444LTI-113 is listed in stock at 3,424 pieces by one component supplier. Inventory is time-sensitive and may change without notice, so use the Request a Quote form on this page to confirm the current quantity, traceability requirements, and dispatch schedule for the exact MPN. The listing also identifies a 68-VFQFN exposed-pad package and quote-based unit pricing.
What are the key specifications of CY8C3444LTI-113 that engineers should know?
The key confirmed specifications are an 8-bit PSoC microcontroller architecture, 16 KB of embedded flash, and a 68-VFQFN package with an exposed pad. The Cypress manufacturer documentation classifies the device as part of the CY8C34 programmable system-on-chip family. Programming support is documented for the QFN68 configuration. Clock rate, SRAM, GPIO count, analog performance, voltage range, and temperature grade must be checked against the exact suffix in the manufacturer datasheet.

Données de référence d'ingénierie pour CY8C3444LTI-113 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the CY8C3444LTI-113 when the production BOM requires that exact ordering code, or when its specific grade matches the application's temperature, qualification, and assembly requirements. CY8C3444LTI-111 and CY8C3444LTI-119T are the strongest documented alternatives because they belong to the same CY8C3444 family, retain the 68-VFQFN footprint, and provide the same 16 KB flash configuration. Confirm the meaning of each suffix before replacing the target, especially temperature range, clock grade, qualification, packing, and exposed-pad requirements. The LTI-115 and LTI-117 alternatives are same-family candidates identified from parametric ordering knowledge, but their commercial and electrical details require direct manufacturer confirmation. None of these alternatives should be approved solely from package appearance: firmware compatibility, peripheral configuration, programming, qualification, and lifecycle status must be reviewed before substitution.

Comparaison avec les alternatives

Paramètre Ce produit CY8C3444LTI-111 CY8C3444LTI-119T CY8C3444LTI-115 CY8C3444LTI-117
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package 68-VFQFN with exposed pad 68-VFQFN with exposed pad 68-VFQFN with exposed pad 68-VFQFN with exposed pad 68-VFQFN with exposed pad
Product Type 8-bit PSoC microcontroller 8-bit PSoC microcontroller PSoC 3 microcontroller 8-bit PSoC microcontroller 8-bit PSoC microcontroller
Flash Memory 16 KB 16 KB 16 KB 16 KB 16 KB
CPU Architecture 8-bit 8051-compatible core 8-bit 8051-compatible core 8051-compatible core 8-bit 8051-compatible core 8-bit 8051-compatible core
Ordering Suffix LTI-113 LTI-111 LTI-119T LTI-115 LTI-117

Principaux différenciateurs

  • Exact 16 KB flash configuration in a compact high-pin-count package (vs CY8C3444LTI-111)
  • Direct manufacturer-listed family alternative with documented 50 MHz family rating (vs CY8C3444LTI-119T)
  • Documented QFN68 programming support (vs CY8C3444LTI-115)

Notes de conception

Treat the exposed pad as a mandatory electrical and thermal feature. Follow the manufacturer land pattern, solder the pad using the prescribed void-filling process, and place thermal vias within or near the pad without violating the package drawing. The pad provides heat spreading only when the PCB has an adequate copper path and the device's actual dissipation has been checked against the required ambient and junction-temperature limits.

Route the exposed pad, ground connection, supply pins, and decoupling network directly from the component datasheet rather than from a generic VQFN footprint. Place local decoupling capacitors at the device supply pins with short ground returns, and keep sensitive analog and programming traces away from noisy switching nodes. Verify pad dimensions, solder-mask clearance, paste stencil aperture, and assembly tolerances using the manufacturer package drawing.

Do not treat another CY8C3444 ordering suffix as interchangeable solely because it has the same package. Compare the ordering-code definitions for temperature grade, speed grade, packing form, qualification, and silicon revision, then verify that the firmware, clock settings, peripheral assignments, and electrical limits remain valid. The -113, -111, -119T, -115, and -117 suffixes are not interchangeable without this document-level review.

Use the exact manufacturer pin-description table to assign the 68 numbered terminals and exposed pad. Check orientation against the package marking and land pattern, leave programming and reset access reachable, and confirm that no unused GPIO is tied to a conflicting function. The high pin count can create routing congestion in compact boards, so complete floorplanning and pin multiplexing before schematic capture is finalized.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were confirmed for this ordering code.

Recherches associées

CY8C3444LTI-113 datasheet CY8C3444LTI-113 datasheet pdf CY8C3444LTI-113 pinout CY8C3444LTI-113 equivalent CY8C3444LTI-113 replacement CY8C3444LTI-113 cross reference CY8C3444LTI-113 price CY8C3444LTI-113 stock Infineon CY8C3444LTI-113 CY8C3444LTI-113 16KB flash CY8C3444LTI-113 68-VFQFN CY8C3444LTI-113 programming

Composants & termes associés

Infineon Technologies Cypress Semiconductor CY8C3444LTI-113 CY8C3444LTI-111 CY8C3444LTI-119T CY8C3444LTI-115 CY8C3444LTI-117 PSoC PSoC 3 mixed-signal microcontroller 8-bit microcontroller 8051-compatible CPU 16 KB flash 2 KB SRAM 68-VFQFN QFN family surface mount SMD exposed pad embedded flash programmable system-on-chip industrial control sensor interface programmable mixed-signal peripherals QFN68 programming
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ