CY8C3444LTI-113 8-Bit 16KB Flash PSoC 3 | Infineon
MPN: CY8C3444LTI-113 ✓ NakahandaCY8C3444LTI-113 Ulas
A PSoC is a mixed-signal microcontroller that combines a CPU with programmable digital blocks, analog-to-digital converters, digital-to-analog converters, comparators, timers, and communication peripherals on one integrated device. This device hierarchy—PSoC to mixed-signal microcontroller to embedded processor to semiconductor—allows designers to consolidate functions that would otherwise require a discrete MCU and several supporting ICs.
Confirmed headline features include 8-bit processing, 16 KB of flash memory, a 68-VFQFN exposed-pad package, and an integrated microcontroller architecture. The CY8C34 family also provides programmable system resources for sensing, control, and communications. Because the exact clock rating, SRAM capacity, analog conversion performance, GPIO count, and electrical limits for this specific suffix are not stated in the product-page excerpts, engineers should confirm those values in the manufacturer datasheet before finalizing clock, memory, and peripheral assignments.
The exposed thermal pad provides a heat-spreading connection between the device and the PCB. Its effectiveness depends on the pad being soldered according to the land pattern and connected through thermal-via arrays to an adequate copper area. Package selection alone does not guarantee equivalent performance between devices in different QFN forms, so mechanical drawings, pin assignment, and exposed-pad dimensions must be checked before substitution.
Typical uses for the CY8C3444LTI-113 include compact industrial controls, touch-capacitive interface controllers, sensor-conditioning systems, consumer accessories, and embedded communication modules. The programmable mixed-signal architecture is particularly useful when a design needs several sensing and control functions but does not justify a larger microcontroller or discrete analog implementation.
Design should begin with the manufacturer pin-description table and reference design guidance. Confirm the exposed-pad connection, supply pins, decoupling requirements, programming interface, and unused GPIO states before routing the board. Also validate the memory map, interrupt structure, peripheral clocking, and analog operating conditions against the exact CY8C3444LTI-113 ordering information.
This product page consolidates the confirmed device identity, package form, memory configuration, programming support, drop-in options, and practical design considerations. It also distinguishes confirmed ordering information from electrical details that still require direct confirmation against the manufacturer documentation.
Mga alternatibo na pwedeng ilagay na CY8C3444LTI-113 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok CY8C3444LTI-113 (parehas na form factor at footprint) — pagkakaiba sa CPU Architecture, Package, Program Memory.
CY8C3444LTI-111
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →CY8C3444LTI-119T
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
CY8C3444LTI-115
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
CY8C3444LTI-117
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
CY8C3444LTI-113 Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | 8-bit programmable system-on-chip (PSoC) microcontroller |
| Program Memory | 16 KB flash |
| CPU Architecture | 8-bit 8051-compatible core |
| Packhaging | 68-VFQFN with exposed pad |
| Package Type | VFQFN |
| Package Pin Count | 68 pins |
| Uri ng Pagpapasok | Surface mount |
| Thermal Pad | Exposed pad |
| Programming Support | Supported by Elnec for QFN68 device |
| Tindminan RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Status | unknown |
Gabay sa Pin Configuration ng CY8C3444LTI-113 68 pins
Pin configuration para sa CY8C3444LTI-113 (68 pins package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa CY8C3444LTI-113.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
CY8C3444LTI-113 ay nararapat para sa 6 aplikasyons: Industrial Sensor and Control Node, Touch-Capacitive User Interface, Consumer Accessory Controller, Compact Communication Module, LED Status and Lighting Controller, Instrumentation and Measurement Front End.
Industrial Sensor and Control Node
The CY8C3444LTI-113 fits compact industrial sensor nodes that need embedded control without a discrete analog and digital chipset. Its confirmed 8-bit PSoC architecture and 16 KB flash provide a processor and nonvolatile firmware storage in one device, while the programmable mixed-signal resources can reduce the need for separate conditioning components. The 68-VFQFN exposed-pad package also supports dense board layouts when its thermal pad and vias follow the manufacturer land pattern. Firmware size, peripheral allocation, temperature grade, and voltage limits should be checked against the manufacturer datasheet before deployment.
Inirekomenda
Touch-Capacitive User Interface
The CY8C3444LTI-113 can serve as the controller for a touch-capacitive keypad, slider, or compact control panel because PSoC devices combine programmable digital logic with analog sensing resources. The confirmed 8-bit architecture is appropriate for scanning inputs, applying debounce and filtering, and driving LEDs or a display. Its 16 KB flash stores application firmware and calibration constants, while the 68-VFQFN format leaves board area for the sensing electrodes and user interface. Verify the exact touch-sensing resources, ADC performance, and GPIO assignments in the manufacturer documentation.
Inirekomenda
Consumer Accessory Controller
The CY8C3444LTI-113 is appropriate for a consumer accessory requiring compact embedded logic, nonvolatile firmware storage, and programmable sensing or control. Its confirmed 16 KB flash supports configuration and application code, while the 8-bit PSoC platform can implement button handling, status indication, sensor acquisition, and communication coordination in one package. The 68-VFQFN exposed-pad form is useful in space-constrained products, but thermal-via placement and exposed-pad soldering must comply with the manufacturer package drawing. Confirm grade, voltage range, and available peripheral count before releasing a production design.
Inirekomenda
Compact Communication Module
The CY8C3444LTI-113 can act as the host controller for a compact communication module that needs local configuration, protocol handling, and nonvolatile parameters. Its PSoC architecture combines an 8051-compatible 8-bit processor with programmable resources, while the confirmed 16 KB flash is suitable for firmware and configuration tables. The 68-VFQFN package provides a high pin count relative to its footprint, leaving dedicated routing options for serial links and status signals. Ethernet PHY selection and protocol requirements must be reviewed alongside the exact GPIO, timing, clock, and package constraints.
Inirekomenda
LED Status and Lighting Controller
The CY8C3444LTI-113 is suitable for coordinating LED status channels, programmable indicators, or simple lighting effects in a compact embedded product. The 8-bit PSoC core can execute timing, state-machine, and button-control logic, while the programmable digital and analog resources can reduce the need for separate LED drivers. Its 16 KB flash holds firmware, lighting tables, and configuration, and the 68-VFQFN footprint provides access to a relatively large pin count. Exact timer resources, drive-current limits, temperature grade, and exposed-pad layout should be verified before implementation.
Inirekomenda
Instrumentation and Measurement Front End
The CY8C3444LTI-113 can support instrumentation front ends that combine sensor acquisition, control, calibration, and a communication interface. The PSoC mixed-signal architecture is intended for embedded signal-processing and control applications, while the confirmed 16 KB flash provides space for firmware and calibration data. Its 68-VFQFN package supports compact, high-density layouts, although analog grounding, exposed-pad return, and decoupling require careful PCB planning. Confirm ADC resolution, acquisition timing, input ranges, reference accuracy, and operating-temperature limits in the manufacturer datasheet before selecting it for precision measurement.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for CY8C3444LTI-113 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | CY8C3444LTI-111 | CY8C3444LTI-119T | CY8C3444LTI-115 | CY8C3444LTI-117 |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 68-VFQFN with exposed pad | 68-VFQFN with exposed pad | 68-VFQFN with exposed pad | 68-VFQFN with exposed pad | 68-VFQFN with exposed pad |
| Product Type | 8-bit PSoC microcontroller | 8-bit PSoC microcontroller | PSoC 3 microcontroller | 8-bit PSoC microcontroller | 8-bit PSoC microcontroller |
| Flash Memory | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| CPU Architecture | 8-bit 8051-compatible core | 8-bit 8051-compatible core | 8051-compatible core | 8-bit 8051-compatible core | 8-bit 8051-compatible core |
| Ordering Suffix | LTI-113 | LTI-111 | LTI-119T | LTI-115 | LTI-117 |
Pangunahing mga Pagkakaiba
- Exact 16 KB flash configuration in a compact high-pin-count package (kumpara saCY8C3444LTI-111)
- Direct manufacturer-listed family alternative with documented 50 MHz family rating (kumpara saCY8C3444LTI-119T)
- Documented QFN68 programming support (kumpara saCY8C3444LTI-115)
Talaan ng Disenyo
Treat the exposed pad as a mandatory electrical and thermal feature. Follow the manufacturer land pattern, solder the pad using the prescribed void-filling process, and place thermal vias within or near the pad without violating the package drawing. The pad provides heat spreading only when the PCB has an adequate copper path and the device's actual dissipation has been checked against the required ambient and junction-temperature limits.
Route the exposed pad, ground connection, supply pins, and decoupling network directly from the component datasheet rather than from a generic VQFN footprint. Place local decoupling capacitors at the device supply pins with short ground returns, and keep sensitive analog and programming traces away from noisy switching nodes. Verify pad dimensions, solder-mask clearance, paste stencil aperture, and assembly tolerances using the manufacturer package drawing.
Do not treat another CY8C3444 ordering suffix as interchangeable solely because it has the same package. Compare the ordering-code definitions for temperature grade, speed grade, packing form, qualification, and silicon revision, then verify that the firmware, clock settings, peripheral assignments, and electrical limits remain valid. The -113, -111, -119T, -115, and -117 suffixes are not interchangeable without this document-level review.
Use the exact manufacturer pin-description table to assign the 68 numbered terminals and exposed pad. Check orientation against the package marking and land pattern, leave programming and reset access reachable, and confirm that no unused GPIO is tied to a conflicting function. The high pin count can create routing congestion in compact boards, so complete floorplanning and pin multiplexing before schematic capture is finalized.
Impormasyon ng Pagsunod sa Kautusan
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were confirmed for this ordering code.