DG212DY+T - Quad SPST CMOS Switch, 175Ω | Analog Devices
Référence : DG212DY+T ✓ ActifDG212DY+T Présentation
An analog switch is a semiconductor device that connects or disconnects signal paths under digital control. The DG212 belongs to the CMOS analog-switch family, which sits within interface ICs and broader signal-path semiconductors. Four SPST channels provide independent selection between one switched node and one common signal path, making the device useful for sample-and-hold systems, test equipment, measurement front ends, and controlled analog routing.
Key features include a 175 Ω on-resistance, 70 dB isolation, normally open operation, and dual-polarity supply support from ±4.5 V to ±18 V. The industrial-temperature version operates from -40 °C to +85 °C and is supplied in a surface-mount 16-SOIC package. Four switch circuits are integrated into one package, reducing component count while preserving separate control for each analog path.
The CMOS implementation supports low-leakage signal handling and latch-up-resistant operation when power is removed while signals remain connected. Maxim guarantees that the DG202 and DG212 families will not latch up under that condition. Unlike a mechanical relay or discrete MOSFET switch, the device provides compact, fast electronic routing with no moving parts and supports negative as well as positive analog signal voltages within the supply limits.
Typical applications include multiplexed instrumentation, automated test systems, audio and communication routing, data acquisition, and precision measurement circuits. Because each channel is normally open, the default state isolates the switched node until the corresponding control input is asserted. The four-control architecture allows independent routing decisions across multiple signal chains.
The primary design consideration is signal range. Input and output voltages must remain within the constraints stated in the manufacturer datasheet, and control logic must be compatible with the device's active-high control scheme. Decoupling capacitors should be placed close to the supply pins, while sensitive analog traces should be kept away from high-impedance control and switching-node routes where possible.
This page combines the DG212 family specifications, package and sourcing information, qualified drop-in references, and practical integration guidance. It is intended to help engineers evaluate the device faster than a generic distributor catalog entry while retaining direct access to the official manufacturer datasheet.
Alternatives de remplacement direct pour DG212DY+T — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
DG212DY+
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG212DY
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG212DY+T Valeurs maximales et caractéristiques électriques
| Number of Switch Circuits | 4 circuits |
| Switch Configuration | 1:1 |
| Switch Type | Quad SPST, normally open |
| On-Resistance | 175 Ω |
| Isolation | 70 dB |
| Supply Voltage Range | ±4.5 V to ±18 V |
| Technology | CMOS |
| Boîtier | 16-SOIC |
| Total Pin Count | 16 pins |
| Type de montage | Surface mount |
| Plage de température de fonctionnement | -40 °C to +85 °C |
| Control Scheme | Normally open control |
| Latch-Up Resistance | Guaranteed with power disconnected and input signals connected |
| Production Status | Production |
| Statut RoHS | RoHS-compliant |
| Lead-Free Status | Lead-free |
Guide de configuration des broches du DG212DY+T 16-soic
Configuration des broches du DG212DY+T (boîtier 16-soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour DG212DY+T.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
DG212DY+T convient pour 6 applications: Automated Test Equipment, Precision Measurement Front Ends, Data Acquisition Systems, Communications Signal Routing, Sample-and-Hold Circuits, Industrial Control Signal Isolation.
Automated Test Equipment
The DG212DY+T fits four-channel signal routing in automated test equipment because it combines four normally open SPST switches in one 16-SOIC package. Its 175 Ω on-resistance and 70 dB isolation help preserve signal amplitude and separation when the fixture selects sources, loads, or measurement paths. The ±4.5 V to ±18 V dual-supply range supports bipolar analog rails commonly used in instrumentation. Place the device near the routed test nodes to minimize PCB resistance and capacitance, and verify the control levels against the active-high control architecture.
Recommandé
Precision Measurement Front Ends
The DG212DY+T can route signals in precision measurement front ends where four channels must be selected independently. A 175 Ω path resistance is suitable for many sensor and buffered analog nodes, while the 70 dB isolation figure helps reduce coupling between off and on paths. The industrial -40 °C to +85 °C range supports equipment operating beyond typical room-temperature conditions. Because added switch resistance contributes to source loading, the source impedance, bandwidth, and allowable measurement error should be evaluated together.
Recommandé
Data Acquisition Systems
The DG212DY+T is appropriate for multiplexed data-acquisition systems that require several normally open analog paths within a compact surface-mount footprint. Four SPST channels allow independent connection of sensor, reference, or excitation lines, while the CMOS construction supports low-power signal conditioning. The 16-SOIC package is convenient for automated assembly, and the -40 °C to +85 °C specification suits industrial acquisition equipment. Keep switched-node traces short and provide local supply bypassing to minimize transients during control transitions.
Recommandé
Communications Signal Routing
The DG212DY+T can implement controlled analog routing in communications equipment when a design needs four independently switched paths on bipolar rails. Its 175 Ω on-resistance may be suitable for moderate-impedance signal nodes, and 70 dB isolation helps suppress unwanted coupling between channels. The broad ±4.5 V to ±18 V supply range accommodates multiple positive and negative rail combinations. High-frequency designs should verify capacitance, bandwidth, insertion loss, and switching transients against the manufacturer characteristics before committing to the device.
Recommandé
Sample-and-Hold Circuits
The DG212DY+T can be used as the routing element in multi-channel sample-and-hold or sample-and-measure architectures. Four normally open switches permit each acquisition node to connect only when requested, reducing unnecessary loading and helping isolate held or inactive paths. The 70 dB isolation and 175 Ω on-resistance provide useful starting points for channel separation and settling analysis. Designers should include switch capacitance, leakage, control delay, and source impedance in the acquisition-time calculation, especially for high-resolution or fast-settling systems.
Recommandé
Industrial Control Signal Isolation
The DG212DY+T supports industrial control designs that need to connect or isolate four low-frequency analog lines under digital control. Its normally open behavior provides a defined disconnected state, and the industrial -40 °C to +85 °C rating fits equipment with a wide internal temperature range. The dual ±4.5 V to ±18 V capability allows operation around positive and negative analog rails. Protective limiting, fault current, and system grounding should be evaluated separately because the switch itself is intended for low-power analog routing rather than direct high-energy load switching.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DG212DY+T — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DG212DY+ | DG212DY |
|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Vishay |
Principaux différenciateurs
- Four independently controlled channels in one package (vs DG212DY+)
- Established DG212 family electrical characteristics (vs DG212DY)
- Dual-polarity operation (vs DG212DY+)
Notes de conception
Do not treat the DG212 and DG201/DG211 families as interchangeable controls. The manufacturer identifies DG202/DG212 as normally open switches with inverted control relative to the DG201/DG211 family. Verify the control polarity and the complete pin-description table in the manufacturer datasheet before updating an existing board, since installing the wrong control behavior can invert the intended switching state.
Place the supply bypass capacitor close to the device supply pins and keep the switched analog traces short to minimize parasitic capacitance and inductive coupling. The 16-SOIC footprint allows routing away from the package, but high-impedance control and analog nodes are susceptible to leakage and crosstalk. Maintain a stable ground reference and avoid placing fast switching return currents directly beneath sensitive signal paths.
Account for the 175 Ω on-resistance when calculating source loading and allowable settling error. The switch capacitance, leakage, control delay, and source impedance determine whether a channel reaches the required accuracy within the acquisition interval. For high-speed or high-resolution systems, use the manufacturer timing and capacitance data to calculate the complete settling budget rather than relying only on isolation.
Informations de conformité
The exact-product distributor record identifies DG212DY+T as RoHS-compliant and lead-free. No additional certification claims are included.