Analog Devices

DG212DY+T - Quad SPST CMOS Switch, 175Ω | Analog Devices

料号: DG212DY+T ✓ 量产中
±4.5 V to ±18 V Vdss 175 Ω Rds(on) 16-SOIC Package
最小起订量: 1 |

DG212DY+T 概述

The Analog Devices DG212DY+T is a quad SPST CMOS analog switch with four independently controlled channels, 175 Ω on-resistance, and a 16-SOIC package. It operates from dual supplies ranging from ±4.5 V to ±18 V and is intended for precision analog signal-routing applications.

An analog switch is a semiconductor device that connects or disconnects signal paths under digital control. The DG212 belongs to the CMOS analog-switch family, which sits within interface ICs and broader signal-path semiconductors. Four SPST channels provide independent selection between one switched node and one common signal path, making the device useful for sample-and-hold systems, test equipment, measurement front ends, and controlled analog routing.

Key features include a 175 Ω on-resistance, 70 dB isolation, normally open operation, and dual-polarity supply support from ±4.5 V to ±18 V. The industrial-temperature version operates from -40 °C to +85 °C and is supplied in a surface-mount 16-SOIC package. Four switch circuits are integrated into one package, reducing component count while preserving separate control for each analog path.

The CMOS implementation supports low-leakage signal handling and latch-up-resistant operation when power is removed while signals remain connected. Maxim guarantees that the DG202 and DG212 families will not latch up under that condition. Unlike a mechanical relay or discrete MOSFET switch, the device provides compact, fast electronic routing with no moving parts and supports negative as well as positive analog signal voltages within the supply limits.

Typical applications include multiplexed instrumentation, automated test systems, audio and communication routing, data acquisition, and precision measurement circuits. Because each channel is normally open, the default state isolates the switched node until the corresponding control input is asserted. The four-control architecture allows independent routing decisions across multiple signal chains.

The primary design consideration is signal range. Input and output voltages must remain within the constraints stated in the manufacturer datasheet, and control logic must be compatible with the device's active-high control scheme. Decoupling capacitors should be placed close to the supply pins, while sensitive analog traces should be kept away from high-impedance control and switching-node routes where possible.

This page combines the DG212 family specifications, package and sourcing information, qualified drop-in references, and practical integration guidance. It is intended to help engineers evaluate the device faster than a generic distributor catalog entry while retaining direct access to the official manufacturer datasheet.

直接替换替代料: DG212DY+T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

DG212DY+

✅ 直接替换
📦 16-SOIC
RON is 175 Ω for both, a 0% difference, while the ordering or temperature-grade suffix differs.

📋 参考替代料(不在目录中)

DG212DY

✅ 直接替换
📦 16-SOIC
Cross-reference records identify the DG212 family and 16-SOIC package; device-specific electrical values require confirmation.

📋 参考替代料(不在目录中)

DG212DY+T 最大额定值与电气特性

Number of Switch Circuits 4 circuits
Switch Configuration 1:1
Switch Type Quad SPST, normally open
On-Resistance 175 Ω
Isolation 70 dB
Supply Voltage Range ±4.5 V to ±18 V
Technology CMOS
封装 16-SOIC
Total Pin Count 16 pins
安装类型 Surface mount
工作温度范围 -40 °C to +85 °C
Control Scheme Normally open control
Latch-Up Resistance Guaranteed with power disconnected and input signals connected
Production Status Production
RoHS 状态 RoHS-compliant
Lead-Free Status Lead-free

DG212DY+T 16-soic 引脚配置指南

DG212DY+T(16-soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

DG212DY+T 的 16-soic 封装引脚图

暂无详细引脚数据: DG212DY+T.

请参阅 数据手册 以查看完整引脚配置。

典型应用

DG212DY+T 适用于 6 应用s: Automated Test Equipment, Precision Measurement Front Ends, Data Acquisition Systems, Communications Signal Routing, Sample-and-Hold Circuits, Industrial Control Signal Isolation.

⚡

Automated Test Equipment

The DG212DY+T fits four-channel signal routing in automated test equipment because it combines four normally open SPST switches in one 16-SOIC package. Its 175 Ω on-resistance and 70 dB isolation help preserve signal amplitude and separation when the fixture selects sources, loads, or measurement paths. The ±4.5 V to ±18 V dual-supply range supports bipolar analog rails commonly used in instrumentation. Place the device near the routed test nodes to minimize PCB resistance and capacitance, and verify the control levels against the active-high control architecture.

🔧

Precision Measurement Front Ends

The DG212DY+T can route signals in precision measurement front ends where four channels must be selected independently. A 175 Ω path resistance is suitable for many sensor and buffered analog nodes, while the 70 dB isolation figure helps reduce coupling between off and on paths. The industrial -40 °C to +85 °C range supports equipment operating beyond typical room-temperature conditions. Because added switch resistance contributes to source loading, the source impedance, bandwidth, and allowable measurement error should be evaluated together.

🖥️

Data Acquisition Systems

The DG212DY+T is appropriate for multiplexed data-acquisition systems that require several normally open analog paths within a compact surface-mount footprint. Four SPST channels allow independent connection of sensor, reference, or excitation lines, while the CMOS construction supports low-power signal conditioning. The 16-SOIC package is convenient for automated assembly, and the -40 °C to +85 °C specification suits industrial acquisition equipment. Keep switched-node traces short and provide local supply bypassing to minimize transients during control transitions.

🌐

Communications Signal Routing

The DG212DY+T can implement controlled analog routing in communications equipment when a design needs four independently switched paths on bipolar rails. Its 175 Ω on-resistance may be suitable for moderate-impedance signal nodes, and 70 dB isolation helps suppress unwanted coupling between channels. The broad ±4.5 V to ±18 V supply range accommodates multiple positive and negative rail combinations. High-frequency designs should verify capacitance, bandwidth, insertion loss, and switching transients against the manufacturer characteristics before committing to the device.

📺

Sample-and-Hold Circuits

The DG212DY+T can be used as the routing element in multi-channel sample-and-hold or sample-and-measure architectures. Four normally open switches permit each acquisition node to connect only when requested, reducing unnecessary loading and helping isolate held or inactive paths. The 70 dB isolation and 175 Ω on-resistance provide useful starting points for channel separation and settling analysis. Designers should include switch capacitance, leakage, control delay, and source impedance in the acquisition-time calculation, especially for high-resolution or fast-settling systems.

🏭

Industrial Control Signal Isolation

The DG212DY+T supports industrial control designs that need to connect or isolate four low-frequency analog lines under digital control. Its normally open behavior provides a defined disconnected state, and the industrial -40 °C to +85 °C rating fits equipment with a wide internal temperature range. The dual ±4.5 V to ±18 V capability allows operation around positive and negative analog rails. Protective limiting, fault current, and system grounding should be evaluated separately because the switch itself is intended for low-power analog routing rather than direct high-energy load switching.

推荐产品汇总

DG212DY+ Same-family quad SPST routing option 用于: Automated Test Equipment, Precision Measurement Front Ends, Data Acquisition Systems, Communications Signal Routing, Sample-and-Hold Circuits, Industrial Control Signal Isolation DG212DY Cross-referenceable DG212-family routing option 用于: Automated Test Equipment, Precision Measurement Front Ends, Data Acquisition Systems, Communications Signal Routing, Sample-and-Hold Circuits, Industrial Control Signal Isolation
What is the DG212DY+T?
The DG212DY+T is a four-channel, normally open SPST CMOS analog switch manufactured by Analog Devices. According to the manufacturer DG212 product page, it provides a 1:1 switch configuration, 175 Ω on-resistance, and operation from dual supplies of ±4.5 V to ±18 V. The device is packaged for surface mounting in a 16-SOIC configuration and is suitable for four independent analog signal paths.
How many independent switches does DG212DY+T contain?
The DG212DY+T contains four independent single-pole, single-throw switches. The manufacturer describes the DG202 and DG212 as quad SPST CMOS analog switches, and distributor records identify DG212DY+T as a four-circuit 1:1 switch. Each channel can therefore route its associated switched node independently under separate control logic.
What is the on-resistance of DG212DY+T?
The DG212DY+T has a specified on-resistance of 175 Ω. This figure appears in the exact-product distributor listing and is also consistent with the DG212 family description on the manufacturer product page. The on-resistance value is important when the device is used in precision measurement, test, or signal-routing systems because it contributes directly to the resistance of the selected signal path.
What supply voltage range does DG212DY+T support?
The DG212DY+T supports dual supplies from ±4.5 V to ±18 V. According to the Analog Devices DG212 product page, the switches can be operated continuously throughout this range. This operating window permits use with positive and negative analog rails in instrumentation, communications, and test systems, provided signal and control voltages remain within the limits specified by the datasheet.
Is DG212DY+T a normally open switch?
Yes, the DG212DY+T is a normally open SPST analog switch. The manufacturer states that the DG202 and DG212 are normally open quad SPST CMOS analog switches, with the DG212 family using an inverted-control relationship relative to the DG201/DG211 family. In the default unasserted state, each selected signal path is disconnected.
Where can I download the DG212 datasheet PDF?
The official DG212 datasheet and product documentation are available from the Analog Devices DG212 product page at https://www.analog.com/en/products/dg212.html. The page links the DG212 Data Sheet, product selection table, ordering information, and related resources. Use the manufacturer document for the final pin descriptions, recommended operating conditions, and electrical characteristics.
Where can I find the DG212DY+T pinout?
The DG212DY+T pinout is defined by the pin-description table and package drawing in the official DG212 datasheet linked from the Analog Devices product page. The exact target is a 16-pin SOIC, and engineers should use the manufacturer diagram when assigning control inputs, supply rails, analog terminals, and any no-connect positions during PCB layout.
What is the operating temperature range of DG212DY+T?
The DG212DY+T is identified as an industrial-temperature component operating from -40 °C to +85 °C. That range supports use in industrial control, instrumentation, communications, and test equipment where the assembly must operate across extended ambient conditions. Final system qualification should consider the complete PCB, enclosure, and thermal environment.
What can replace the DG212DY+T drop-in?
The DG212DY+ is the closest identified drop-in reference for the DG212DY+T. Both use the same DG212 16-SOIC device family, 175 Ω on-resistance, four SPST channels, and ±4.5 V to ±18 V supply range. The suffix indicates different ordering or temperature-grade treatment, so engineers should verify the exact commercial or industrial-temperature requirement before substitution.
DG212DY+T vs DG212DY+ - which should I choose?
Choose DG212DY+T when the assembly requires the industrial-temperature -40 °C to +85 °C grade, and choose DG212DY+ when commercial-temperature operation is acceptable and the requested ordering treatment differs. Both are 16-SOIC DG212 devices with four SPST channels, 175 Ω on-resistance, and dual supplies of ±4.5 V to ±18 V, so the main decision is the required temperature grade.
When should I choose DG212DY+T over DG212DY+?
Choose the DG212DY+T when the product must function from -40 °C through +85 °C, particularly in industrial or outdoor equipment with a broad internal temperature range. Select the DG212DY+ for designs whose operating requirements remain inside the commercial-temperature range and where its ordering treatment satisfies procurement needs.
Is DG212DY+T suitable for instrumentation and test equipment?
The DG212DY+T is suitable for instrumentation and automated test equipment that need four independent normally open analog paths. Its 175 Ω on-resistance, 70 dB isolation, ±4.5 V to ±18 V supply range, and industrial temperature coverage fit many signal-routing tasks. Signal bandwidth, capacitance, leakage, and noise requirements should still be checked against the complete application.
Where can I buy DG212DY+T and check current availability?
Use the Request a Quote form on this page to request DG212DY+T pricing, current availability, and lead time from XAIPART. The form lets the purchasing request be associated with the exact 16-SOIC industrial-temperature MPN, reducing the risk of receiving a different package, temperature grade, or ordering suffix.
What is the price of DG212DY+T?
The current DG212DY+T commercial price and quantity availability should be requested through the Request a Quote form on this page. The quote request identifies the exact MPN and package requirement, allowing XAIPART to return the current commercial terms rather than a potentially stale catalog or generic family price.
What is the lead time and stock status for DG212DY+T?
Current DG212DY+T stock status and lead time should be confirmed through the Request a Quote form on this page. Include the required quantity, target date, and whether additional reel or tray packaging is acceptable. Supply timing can vary with order quantity and manufacturing conditions, so a project-specific confirmation is preferable to assuming immediate availability.
What are the key specifications of DG212DY+T that engineers should know?
The key DG212DY+T specifications are four independent normally open SPST channels, 1:1 switching, 175 Ω on-resistance, 70 dB isolation, and dual operation from ±4.5 V to ±18 V. The part uses CMOS technology, carries an industrial -40 °C to +85 °C temperature range, and is supplied in a 16-SOIC surface-mount package.
What is the best Analog Devices equivalent for DG212DY+T?
The best identified Analog Devices drop-in equivalent is the DG212DY+. It retains the same DG212 family architecture, four SPST switches, 175 Ω on-resistance, 16-SOIC footprint, and ±4.5 V to ±18 V operating range. The principal selection check is temperature grade and ordering suffix; the active control behavior and pin arrangement must also match the original design.

工程参考数据: DG212DY+T ——对比、设计指导和合规信息。

选型指南

Choose the DG212DY+T when the design needs four independent, normally open analog switches with 175 Ω on-resistance, 70 dB isolation, and an industrial -40 °C to +85 °C operating range. The DG212DY+ is the closest same-family alternative when commercial-temperature operation is acceptable and its ordering treatment matches procurement requirements. The Vishay DG212DY cross-reference may be considered when the same 16-SOIC footprint is required, but its exact electrical characteristics, control polarity, temperature grade, and lifecycle status should be confirmed before release. Neither the DG211 nor DG202 family should be selected automatically: their inverted control relationship can produce opposite switch behavior even when a similar package is used. For production designs, use the manufacturer pin and electrical tables to confirm signal limits, switching timing, and control levels.

与替代料对比

参数 本产品 DG212DY+ DG212DY
Package 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Vishay

关键差异点

  • Four independently controlled channels in one package (对比 DG212DY+)
  • Established DG212 family electrical characteristics (对比 DG212DY)
  • Dual-polarity operation (对比 DG212DY+)

设计说明

Do not treat the DG212 and DG201/DG211 families as interchangeable controls. The manufacturer identifies DG202/DG212 as normally open switches with inverted control relative to the DG201/DG211 family. Verify the control polarity and the complete pin-description table in the manufacturer datasheet before updating an existing board, since installing the wrong control behavior can invert the intended switching state.

Place the supply bypass capacitor close to the device supply pins and keep the switched analog traces short to minimize parasitic capacitance and inductive coupling. The 16-SOIC footprint allows routing away from the package, but high-impedance control and analog nodes are susceptible to leakage and crosstalk. Maintain a stable ground reference and avoid placing fast switching return currents directly beneath sensitive signal paths.

Account for the 175 Ω on-resistance when calculating source loading and allowable settling error. The switch capacitance, leakage, control delay, and source impedance determine whether a channel reaches the required accuracy within the acquisition interval. For high-speed or high-resolution systems, use the manufacturer timing and capacitance data to calculate the complete settling budget rather than relying only on isolation.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The exact-product distributor record identifies DG212DY+T as RoHS-compliant and lead-free. No additional certification claims are included.

相关搜索

dg212 datasheet DG212DY+T datasheet DG212DY+T pinout DG212DY+T specifications DG212DY+T 175 ohm DG212DY+T 16-SOIC DG212DY+T equivalent DG212DY+T replacement DG212DY+T vs DG212DY+ Analog Devices DG212DY+T DG212DY+T price DG212DY+T stock

相关元器件 & 术语

Analog Devices DG212DY+T DG212DY+ DG212DY DG212 SPST analog switch CMOS analog switch interface IC semiconductor normally open switch on-resistance signal isolation 16-SOIC SOIC family surface mount dual supply industrial temperature range test equipment instrumentation data acquisition RoHS lead-free
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情