DG403DY+T - Dual 45Ω High-Speed SPDT Switch | Analog Devices
Référence : DG403DY+T ✓ ActifDG403DY+T Présentation
An analog switch is a semiconductor device that routes an electrical signal between circuit paths under digital control. The DG403 belongs to the analog-switch hierarchy, where the dual-SPDT topology provides two independently selectable throw paths per switch. This makes the device useful in test equipment, data acquisition, instrumentation, communication interfaces, and sampling systems that require compact, high-speed multiplexing without mechanical relay delays.
The DG403 series combines a maximum on resistance of 45 Ω with switching times below 150 ns, according to the family data. Analog Devices also states that its redesigned DG401, DG403, and DG405 devices provide guaranteed on-resistance matching between switches of 2 Ω maximum and on-resistance flatness of 3 Ω maximum. These characteristics help reduce gain errors and distortion when signals pass through a selected channel.
The monolithic CMOS implementation provides TTL-compatible and CMOS-compatible control inputs, low analog on resistance, low charge injection, and low power consumption. The controlled charge injection is particularly useful in sample-and-hold circuits because it limits the unwanted voltage step introduced by control transitions. Its dual-channel architecture also allows two signal paths to be switched concurrently, reducing the number of packages required in multi-channel systems.
Typical uses include precision test and measurement, multiplexed sensor acquisition, industrial signal routing, communication equipment, and sample-and-hold circuits. The 45 Ω maximum on resistance is appropriate for many medium-impedance analog signals, while the sub-150 ns transition capability supports high-speed routing. Applications requiring substantially lower resistance or less signal degradation should compare the DG405 family or a dedicated low-resistance multiplexer before finalizing the design.
PCB layout should keep analog traces short and provide a direct ground-return path beneath or beside the switch. Control inputs should be driven with clean CMOS-compatible logic, and unused inputs must not float. Signal amplitude and supply voltage must remain inside the datasheet limits because excessive voltage can increase distortion or compromise channel isolation.
This product page combines the manufacturer’s DG403 family information with distributor listings, verified package details, application guidance, and clearly qualified drop-in alternatives. It helps engineers identify the correct 16-SOIC replacement while avoiding parts that merely provide similar switching functions but do not preserve the required footprint.
Alternatives de remplacement direct pour DG403DY+T — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec DG403DY+T (même facteur de forme et même empreinte) — différant par On-Resistance Flatness, Package.
DG403DY+
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →DG403DY-T1
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG403DY-T
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG403DY+T Valeurs maximales et caractéristiques électriques
| Switch Type | Dual SPDT analog switch |
| Number of Channels | 2 circuits |
| On Resistance | 45 Ω maximum |
| Typical On Resistance | 20 Ω |
| On-Resistance Matching Between Switches | 2 Ω maximum |
| On-Resistance Flatness | 3 Ω maximum |
| Turn-On Time | Less than 150 ns |
| Analog Signal Voltage Range | -20 V to +20 V |
| Dual-Supply Operating Range | ±4.5 V to ±20 V |
| Control Input Compatibility | TTL and CMOS compatible |
| Boîtier | 16-pin SOIC |
| Type de montage | Surface mount |
| Statut RoHS | Compliant |
| Production Status | Production |
Guide de configuration des broches du DG403DY+T 16-pin soic
Configuration des broches du DG403DY+T (boîtier 16-pin soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour DG403DY+T.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
DG403DY+T convient pour 6 applications: Precision Test and Measurement, Multiplexed Sensor Acquisition, Sample-and-Hold Circuits, Industrial Signal Routing, Communication Interface Routing, Audio and Video Signal Selection.
Precision Test and Measurement
The DG403DY+T is well suited to precision test equipment because its 45 Ω maximum on resistance, 2 Ω maximum matching guarantee, and 3 Ω maximum flatness help limit channel-dependent errors. Two independent SPDT channels can route a source, reference, or measurement path without mechanical relay delay. According to the Analog Devices DG403 manufacturer datasheet, switching occurs in less than 150 ns, allowing rapid settling between test states. The primary design consideration is maintaining the signal within the -20 V to +20 V range and confirming settling accuracy from the complete datasheet characteristic curves.
Recommandé
Multiplexed Sensor Acquisition
The two SPDT channels of the DG403DY+T allow a compact multiplexer to connect paired sensor or conditioning paths while keeping control timing deterministic. Its 45 Ω maximum on resistance is appropriate for many medium-impedance sensor signals, and the guaranteed 2 Ω maximum matching between switches reduces variation between selected channels. According to the Analog Devices DG403 manufacturer datasheet, the family also provides low charge injection and fast switching below 150 ns. Use short PCB traces, a quiet ground return, and input protection appropriate to the sensor’s maximum voltage.
Recommandé
Sample-and-Hold Circuits
The DG403DY+T fits sample-and-hold front ends that require quick path selection and controlled charge injection. According to the Analog Devices DG403 manufacturer datasheet, the DG403 family features low charge injection, a maximum on resistance of 45 Ω, and turn-on time below 150 ns. These characteristics reduce the switching step and acquisition delay relative to slower mechanisms. The dual SPDT organization can implement complementary sample and hold paths, although the application must account for hold leakage, switch capacitance, and settling behavior at the selected signal amplitude.
Recommandé
Industrial Signal Routing
The DG403DY+T can route industrial analog signals when the system’s voltage, bandwidth, and impedance requirements remain within the DG403 limits. Its 45 Ω maximum on resistance, guaranteed channel matching, and sub-150 ns switching support predictable path selection. According to the Analog Devices DG403 manufacturer datasheet, the device supports dual supplies from ±4.5 V to ±20 V and analog signals from -20 V to +20 V. Industrial implementations should include surge and transient protection upstream of the switch and verify temperature performance across the complete enclosure environment.
Recommandé
Communication Interface Routing
The DG403DY+T is useful in communication equipment for switching moderate-impedance analog and control paths under CMOS-compatible logic. Its guaranteed 2 Ω maximum matching between switches helps limit channel-to-channel variation, while the 3 Ω maximum flatness specification controls resistance variation across the signal range. According to the Analog Devices DG403 manufacturer datasheet, the monolithic CMOS design supports fast operation with turn-on time below 150 ns. Layout should keep sensitive nodes compact, isolate return currents, and account for switch capacitance when establishing interface bandwidth.
Recommandé
Audio and Video Signal Selection
The DG403DY+T can support audio or video source selection when the path resistance and switching transients meet the channel’s requirements. The 45 Ω maximum on resistance and 3 Ω maximum flatness help maintain more consistent attenuation across the analog range, while fast switching supports electronic selection rather than mechanical relay control. According to the Analog Devices DG403 manufacturer datasheet, the DG403 also offers low charge injection. Audio designs should still evaluate audible artifacts, while video designs must verify bandwidth, capacitance, crosstalk, and settling against the target format.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DG403DY+T — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DG403DY+ | DG403DY-T1 | DG403DY-T |
|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Brand | Analog Devices | Analog Devices | Vishay Intertechnology | Renesas Electronics |
| Switch Configuration | Dual SPDT | Dual SPDT | 2-circuit analog switch | Dual SPDT |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| On Resistance | 45 Ω maximum | 45 Ω | 45 Ω | 45 Ω |
| Turn-On Time | Less than 150 ns | Less than 150 ns | Less than 150 ns | Less than 150 ns |
| Control Input Compatibility | TTL and CMOS compatible | TTL and CMOS compatible | TTL and CMOS compatible | TTL and CMOS compatible |
Principaux différenciateurs
- Guaranteed channel-to-channel resistance matching (vs DG403DY-T1)
- Guaranteed on-resistance flatness (vs DG403DY-T)
- Explicit production status (vs DG403DY-T1)
Notes de conception
Route the selected analog nodes with short traces and a continuous ground reference because switch capacitance and PCB capacitance contribute to settling time. The DG403 family guarantees turn-on time below 150 ns, but that figure does not include the complete acquisition system. Measure settling at the actual signal amplitude and source impedance, and keep control traces away from sensitive common and throw terminals.
Assign control pins according to the manufacturer’s 16-pin pin-description table before laying out the PCB. Use a defined logic state during power-up and reset so that the connected source is not exposed to an unintended transient. Place any external protection components close to the pins that connect directly to external signals, and maintain a low-impedance ground return for both switching channels.
Do not substitute the DG401 SPST or DG405 lower-resistance families solely because they use the same general pin layout. The DG403 provides two SPDT channels, while the DG401 uses SPST behavior and the DG405 has a different resistance class. Compare switch configuration, control polarity, on resistance, voltage limits, and charge injection before approving any DG400-series substitution.
Informations de conformité
RoHS compliance is identified in the DG403DY distributor catalog. The device is an interface analog switch rather than an automotive-qualified component. Other environmental declarations are not established by the manufacturer product records and remain unknown.