Analog Devices

DG403DY+T - Dual 45Ω High-Speed SPDT Switch | Analog Devices

N.º da peça: DG403DY+T ✓ Ativo
-20 V to +20 V Vdss 45 Ω maximum Rds(on) 16-pin SOIC Package
MOQ: 1 |

DG403DY+T Visão geral

The Analog Devices DG403DY+T is a dual, high-speed CMOS analog switch with two SPDT channels, 45 Ω on resistance, and a 16-pin SOIC package. The device supports ±4.5 V to ±20 V analog signal ranges and is designed for precision, high-performance signal routing where low on resistance, fast switching, and controlled channel behavior are important. The +T ordering code identifies the tape-and-reel shipping configuration.

An analog switch is a semiconductor device that routes an electrical signal between circuit paths under digital control. The DG403 belongs to the analog-switch hierarchy, where the dual-SPDT topology provides two independently selectable throw paths per switch. This makes the device useful in test equipment, data acquisition, instrumentation, communication interfaces, and sampling systems that require compact, high-speed multiplexing without mechanical relay delays.

The DG403 series combines a maximum on resistance of 45 Ω with switching times below 150 ns, according to the family data. Analog Devices also states that its redesigned DG401, DG403, and DG405 devices provide guaranteed on-resistance matching between switches of 2 Ω maximum and on-resistance flatness of 3 Ω maximum. These characteristics help reduce gain errors and distortion when signals pass through a selected channel.

The monolithic CMOS implementation provides TTL-compatible and CMOS-compatible control inputs, low analog on resistance, low charge injection, and low power consumption. The controlled charge injection is particularly useful in sample-and-hold circuits because it limits the unwanted voltage step introduced by control transitions. Its dual-channel architecture also allows two signal paths to be switched concurrently, reducing the number of packages required in multi-channel systems.

Typical uses include precision test and measurement, multiplexed sensor acquisition, industrial signal routing, communication equipment, and sample-and-hold circuits. The 45 Ω maximum on resistance is appropriate for many medium-impedance analog signals, while the sub-150 ns transition capability supports high-speed routing. Applications requiring substantially lower resistance or less signal degradation should compare the DG405 family or a dedicated low-resistance multiplexer before finalizing the design.

PCB layout should keep analog traces short and provide a direct ground-return path beneath or beside the switch. Control inputs should be driven with clean CMOS-compatible logic, and unused inputs must not float. Signal amplitude and supply voltage must remain inside the datasheet limits because excessive voltage can increase distortion or compromise channel isolation.

This product page combines the manufacturer’s DG403 family information with distributor listings, verified package details, application guidance, and clearly qualified drop-in alternatives. It helps engineers identify the correct 16-SOIC replacement while avoiding parts that merely provide similar switching functions but do not preserve the required footprint.

Alternativas drop-in para DG403DY+T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com DG403DY+T (mesmo formato e footprint) — diferindo em On-Resistance Flatness, Package.

Maxim Integrated
On-Resistance Flatness: 3Ω maximum over signal range
Package: 16-pin NSOIC
Comparar com DG403DY+T →

DG403DY+

✅ Drop-In
Maxim Integrated
📦 16-SOIC
2 circuits · 2:1 SPDT per circuit · 45Ω · 20Ω · 2Ω maximum · 3Ω maximum over signal range · 10V to 30V · ±4.5V to ±20V

Consulte o preço

Ver ficha técnica →

DG403DY-T1

✅ Drop-In
📦 16-SOIC
Same 16-SOIC footprint, 2-channel 45 ohm switching configuration, and stated turn-on time below 150 ns; 0% difference in the listed on resistance and switching time

📋 Alternativa de referência (fora do catálogo)

DG403DY-T

✅ Drop-In
📦 16-SOIC
Same 16-SOIC footprint, 2-channel 45 ohm switching configuration, and turn-on time below 150 ns; 0% difference in the listed on resistance and switching time

📋 Alternativa de referência (fora do catálogo)

DG403DY+T Classificações máximas e características elétricas

Switch Type Dual SPDT analog switch
Number of Channels 2 circuits
On Resistance 45 Ω maximum
Typical On Resistance 20 Ω
On-Resistance Matching Between Switches 2 Ω maximum
On-Resistance Flatness 3 Ω maximum
Turn-On Time Less than 150 ns
Analog Signal Voltage Range -20 V to +20 V
Dual-Supply Operating Range ±4.5 V to ±20 V
Control Input Compatibility TTL and CMOS compatible
Encapsulamento 16-pin SOIC
Tipo de montagem Surface mount
Status RoHS Compliant
Production Status Production

Guia de Configuração de Pinos do DG403DY+T 16-pin soic

Configuração de pinos para DG403DY+T (pacote 16-pin soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-pin soic para DG403DY+T

Nenhum dado detalhado de pinagem disponível para DG403DY+T.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

DG403DY+T é adequado para 6 aplicaçãos: Precision Test and Measurement, Multiplexed Sensor Acquisition, Sample-and-Hold Circuits, Industrial Signal Routing, Communication Interface Routing, Audio and Video Signal Selection.

🔧

Precision Test and Measurement

The DG403DY+T is well suited to precision test equipment because its 45 Ω maximum on resistance, 2 Ω maximum matching guarantee, and 3 Ω maximum flatness help limit channel-dependent errors. Two independent SPDT channels can route a source, reference, or measurement path without mechanical relay delay. According to the Analog Devices DG403 manufacturer datasheet, switching occurs in less than 150 ns, allowing rapid settling between test states. The primary design consideration is maintaining the signal within the -20 V to +20 V range and confirming settling accuracy from the complete datasheet characteristic curves.

🧩

Multiplexed Sensor Acquisition

The two SPDT channels of the DG403DY+T allow a compact multiplexer to connect paired sensor or conditioning paths while keeping control timing deterministic. Its 45 Ω maximum on resistance is appropriate for many medium-impedance sensor signals, and the guaranteed 2 Ω maximum matching between switches reduces variation between selected channels. According to the Analog Devices DG403 manufacturer datasheet, the family also provides low charge injection and fast switching below 150 ns. Use short PCB traces, a quiet ground return, and input protection appropriate to the sensor’s maximum voltage.

📊

Sample-and-Hold Circuits

The DG403DY+T fits sample-and-hold front ends that require quick path selection and controlled charge injection. According to the Analog Devices DG403 manufacturer datasheet, the DG403 family features low charge injection, a maximum on resistance of 45 Ω, and turn-on time below 150 ns. These characteristics reduce the switching step and acquisition delay relative to slower mechanisms. The dual SPDT organization can implement complementary sample and hold paths, although the application must account for hold leakage, switch capacitance, and settling behavior at the selected signal amplitude.

🏭

Industrial Signal Routing

The DG403DY+T can route industrial analog signals when the system’s voltage, bandwidth, and impedance requirements remain within the DG403 limits. Its 45 Ω maximum on resistance, guaranteed channel matching, and sub-150 ns switching support predictable path selection. According to the Analog Devices DG403 manufacturer datasheet, the device supports dual supplies from ±4.5 V to ±20 V and analog signals from -20 V to +20 V. Industrial implementations should include surge and transient protection upstream of the switch and verify temperature performance across the complete enclosure environment.

🌐

Communication Interface Routing

The DG403DY+T is useful in communication equipment for switching moderate-impedance analog and control paths under CMOS-compatible logic. Its guaranteed 2 Ω maximum matching between switches helps limit channel-to-channel variation, while the 3 Ω maximum flatness specification controls resistance variation across the signal range. According to the Analog Devices DG403 manufacturer datasheet, the monolithic CMOS design supports fast operation with turn-on time below 150 ns. Layout should keep sensitive nodes compact, isolate return currents, and account for switch capacitance when establishing interface bandwidth.

📺

Audio and Video Signal Selection

The DG403DY+T can support audio or video source selection when the path resistance and switching transients meet the channel’s requirements. The 45 Ω maximum on resistance and 3 Ω maximum flatness help maintain more consistent attenuation across the analog range, while fast switching supports electronic selection rather than mechanical relay control. According to the Analog Devices DG403 manufacturer datasheet, the DG403 also offers low charge injection. Audio designs should still evaluate audible artifacts, while video designs must verify bandwidth, capacitance, crosstalk, and settling against the target format.

Resumo dos produtos recomendados

DG401 Single-SPST companion in the DG400 series Usado em: Precision Test and Measurement, Multiplexed Sensor Acquisition, Sample-and-Hold Circuits, Industrial Signal Routing, Communication Interface Routing, Audio and Video Signal Selection DG405 Higher-resistance companion in the DG400 series Usado em: Precision Test and Measurement, Multiplexed Sensor Acquisition, Sample-and-Hold Circuits, Industrial Signal Routing, Communication Interface Routing, Audio and Video Signal Selection
What is the DG403DY+T?
The DG403DY+T is a production dual high-speed CMOS analog switch with two SPDT channels, a 45 Ω maximum on resistance, and a 16-pin SOIC package. According to the Analog Devices DG403 manufacturer datasheet, the device uses TTL-compatible and CMOS-compatible control inputs and supports analog signal ranges from -20 V to +20 V. The +T suffix identifies the tape-and-reel ordering configuration.
What are the key specifications of DG403DY+T that engineers should know?
The DG403DY+T combines two independent SPDT channels, 45 Ω maximum on resistance, and switching times below 150 ns in a 16-pin SOIC. According to the Analog Devices DG403 manufacturer datasheet, on-resistance matching between switches is guaranteed at 2 Ω maximum and on-resistance flatness at 3 Ω maximum. These specifications make the device appropriate for precision routing, multiplexing, and sample-and-hold circuits.
Where can I download the DG403DY+T datasheet PDF?
The official DG403 product page at Analog Devices provides the manufacturer datasheet and supporting documentation for the DG403 family. The distributor listing for DG403DY+T also provides access to the same family data. Use the manufacturer PDF for supply limits, control logic, electrical characteristics, and the authoritative 16-pin pin description rather than relying on a distributor summary.
Where is the pinout for the DG403DY+T?
The DG403DY+T pinout is defined by the 16-pin SOIC pin-description table in the Analog Devices DG403 manufacturer datasheet. Use that table to assign control inputs, common terminals, throw terminals, supply pins, and ground connections on the PCB. The exact physical pin names were not reproduced in this product record, so consult the manufacturer diagram before routing the board.
What is the difference between DG403DY+T and DG403DY?
DG403DY+T is the tape-and-reel ordering form of the DG403DY device, while the manufacturer’s DG403 family page identifies the core device as a dual high-speed analog switch. According to the Analog Devices DG403 manufacturer datasheet and distributor records, both refer to the 16-SOIC DG403 configuration. Confirm the required mechanical and shipment form before treating the suffix as an electrically different device.
Is DG403DY+T suitable for high-speed signal routing?
Yes, the DG403DY+T is suitable for high-speed analog routing when its stated resistance and switching limits match the system requirements. According to the Analog Devices DG403 manufacturer datasheet, turn-on time is below 150 ns and on resistance is limited to 45 Ω. The device is particularly suitable for medium-impedance signals, while high-frequency or low-amplitude precision paths may require careful impedance and capacitance analysis.
Where can I buy DG403DY+T online?
Use the Request a Quote form on this page to request DG403DY+T availability, unit pricing, and the required production quantity. The request can be placed directly against the exact Analog Devices DG403DY+T ordering code without substituting a different suffix. Current commercial terms should be confirmed through that form because channel inventory and lead time can change.
What is the price of DG403DY+T?
The current commercial price for DG403DY+T is returned through the Request a Quote form on this page. The form supports an inquiry for the exact 16-pin SOIC tape-and-reel ordering code and the intended purchase quantity. Confirm any shipment date, lot traceability, and packaging requirements as part of the quotation request.
What is the lead time and stock status for DG403DY+T?
Current stock and lead-time information for DG403DY+T should be obtained through the Request a Quote form on this page. The manufacturer identifies the DG403 as a production device, but production status does not by itself guarantee a specific quantity or delivery date. Include your required quantity, target date, and acceptable packaging configuration in the request.
DG403DY+T vs DG403DY-T1 - which is better for a 16-SOIC design?
DG403DY+T and DG403DY-T1 both appear in 16-SOIC listings with 45 Ω on resistance and dual analog-switch functionality, so either may fit the mechanical footprint. According to the Analog Devices DG403 manufacturer datasheet and Vishay listing, the important remaining checks are control polarity, switch topology, supply limits, and lifecycle requirements. Choose the source whose complete electrical specification matches the original design.
When should I choose DG403DY+T over a cross-brand alternative?
Choose DG403DY+T when the original Analog Devices device behavior, documentation, and exact ordering code are the primary design constraints. Its 45 Ω maximum on resistance, 2 Ω maximum matching guarantee, 3 Ω maximum flatness, and sub-150 ns switching specification are clearly documented for the DG403 family. A cross-brand option is appropriate only after its pinout, logic levels, voltage ratings, and lifecycle status have been independently confirmed.
Is DG403DY+T suitable for sample-and-hold systems?
The DG403DY+T is suitable for many sample-and-hold systems because the DG403 family provides low charge injection and fast switching. According to the Analog Devices DG403 manufacturer datasheet, turn-on time is below 150 ns and the control inputs are TTL- and CMOS-compatible. The actual acquisition error should also be checked against the switch’s charge-injection, off-isolation, and on-resistance values for the selected operating conditions.
What is the best drop-in replacement for DG403DY+T?
The closest documented replacements are DG403DY-T1 from Vishay Siliconix and DG403DY-T from Renesas Electronics, both offered in 16-pin SOIC configurations with 45 Ω on resistance. According to the Analog Devices DG403 manufacturer datasheet and the replacement listings, the DG403DY-T is described as a pin-compatible alternative. Final approval should verify every pin, control polarity, voltage rating, and electrical limit before substitution.
Can DG403DY-T replace DG403DY+T?
The DG403DY-T can be considered for replacement of DG403DY+T because both are DG403-family dual switches offered in 16-pin SOIC packages. According to the Renesas DG401/DG403 manufacturer datasheet, the DG403 pinout permits a standard layout and provides equivalent dual SPDT switching. Nevertheless, confirm supply arrangements, control-input thresholds, switching behavior, and full operating-temperature limits before approving a production substitution.
Is the DG403DY+T RoHS compliant and production active?
The DG403DY+T is identified as RoHS compliant, and Analog Devices lists the DG403 family as a production device on its official product page. According to the Analog Devices DG403 manufacturer datasheet, the device is a precision high-performance analog switch. REACH status, halogen-free status, and conflict-minerals status are not established by the product records and should be confirmed during qualification or purchasing review.

Dados de referência de engenharia para DG403DY+T — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose DG403DY+T when the original design depends on the Analog Devices DG403 electrical behavior, documentation, and exact tape-and-reel ordering code. Its 45 Ω maximum on resistance, 2 Ω maximum channel matching, 3 Ω maximum flatness, and sub-150 ns turn-on behavior make it appropriate for medium-impedance precision routing. Consider DG403DY-T1 when a Vishay-supplied 16-SOIC alternative is needed and its complete electrical characteristics have been checked. Consider DG403DY-T when Renesas sourcing is preferred and the control logic, voltage limits, and lifecycle requirements are verified. Do not select DG401 or DG405 as automatic replacements because their SPST/SPDT behavior or resistance class differs. For new designs, also compare lower-resistance switch families when source impedance is low enough that the DG403’s 45 Ω maximum causes excessive attenuation.

Comparação com alternativas

Parâmetro Este produto DG403DY+ DG403DY-T1 DG403DY-T
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same
Brand Analog Devices Analog Devices Vishay Intertechnology Renesas Electronics
Switch Configuration Dual SPDT Dual SPDT 2-circuit analog switch Dual SPDT
Number of Circuits 2 circuits 2 circuits 2 circuits 2 circuits
On Resistance 45 Ω maximum 45 Ω 45 Ω 45 Ω
Turn-On Time Less than 150 ns Less than 150 ns Less than 150 ns Less than 150 ns
Control Input Compatibility TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible

Principais diferenciais

  • Guaranteed channel-to-channel resistance matching (vs DG403DY-T1)
  • Guaranteed on-resistance flatness (vs DG403DY-T)
  • Explicit production status (vs DG403DY-T1)

Notas de projeto

Route the selected analog nodes with short traces and a continuous ground reference because switch capacitance and PCB capacitance contribute to settling time. The DG403 family guarantees turn-on time below 150 ns, but that figure does not include the complete acquisition system. Measure settling at the actual signal amplitude and source impedance, and keep control traces away from sensitive common and throw terminals.

Assign control pins according to the manufacturer’s 16-pin pin-description table before laying out the PCB. Use a defined logic state during power-up and reset so that the connected source is not exposed to an unintended transient. Place any external protection components close to the pins that connect directly to external signals, and maintain a low-impedance ground return for both switching channels.

Do not substitute the DG401 SPST or DG405 lower-resistance families solely because they use the same general pin layout. The DG403 provides two SPDT channels, while the DG401 uses SPST behavior and the DG405 has a different resistance class. Compare switch configuration, control polarity, on resistance, voltage limits, and charge injection before approving any DG400-series substitution.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS compliance is identified in the DG403DY distributor catalog. The device is an interface analog switch rather than an automotive-qualified component. Other environmental declarations are not established by the manufacturer product records and remain unknown.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

DG403DY+T datasheet DG403DY+T pinout DG403DY+T datasheet pdf DG403DY+T equivalent DG403DY+T replacement DG403DY+T cross reference DG403DY+T footprint DG403DY+T price DG403DY+T stock Analog Devices DG403DY+T DG403DY+T vs DG403DY-T1 DG403DY+T 45 ohm switch DG403 16-SOIC pinout DG403 dual SPDT application circuit

Componentes & termos relacionados

Analog Devices Maxim Integrated DG403DY+T DG403DY+ DG403DY-T1 DG403DY-T DG401 DG403 DG405 dual SPDT analog switch analog switch analog multiplexer CMOS analog switch interface IC semiconductor 16-SOIC SOIC family surface mount SMD package on resistance on-resistance matching on-resistance flatness charge injection TTL-compatible control CMOS-compatible control sample and hold test and measurement industrial signal routing RoHS
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ