DG408AK - 8:1 CMOS Analog Multiplexer | Analog Devices
Référence : DG408AK ✓ ActifDG408AK Présentation
An analog multiplexer is a semiconductor switch that connects one of several analog inputs to a common output. It belongs to the interface IC hierarchy, where it sits between sensors, measurement circuits, data converters, and system control logic. The DG408AK uses three binary select inputs and an enable input to route one of eight channels. It can also be configured as two independent 4-channel multiplexers.
Key electrical characteristics include 100 ohm maximum on-resistance, 15 pC maximum charge injection, and a 160 ns transition time. The DG408 family provides TTL-compatible logic control, low power consumption, reduced switching errors, and rail-to-rail signal handling. An improved configuration limits guaranteed on-resistance to 8 ohm and on-resistance flatness to 9 ohm, while input leakage is specified at no more than 100 ohm and 5 nA at 85 degrees Celsius.
The DG408AK combines an eight-element CMOS analog-switch array with TTL/CMOS-compatible decoding circuitry and an enable function for cascading or externally controlled devices. Its 3-bit address interface supports straightforward binary channel selection. The switching architecture can be used for multiplexed or demultiplexed signal routing, allowing one measurement amplifier or converter to serve several input channels.
Typical uses include data acquisition, instrumentation, battery monitoring, test-equipment signal routing, industrial control, and communications systems. The 44 V maximum supply rating makes the device suitable for systems operating from a single positive supply, while the low-noise switching characteristics help preserve fidelity in high-impedance measurement paths.
PCB design should keep analog traces short and provide a stable ground reference. Place input and output decoupling close to the device, route switch-control signals away from sensitive analog nets, and use a common-ground return strategy to minimize switching transients. The manufacturer datasheet pin-description table should be used when assigning all 16 package connections.
This product record combines manufacturer specifications, verified package and channel details, pin-level implementation guidance, and clearly qualified drop-in comparisons. It is intended to help engineers evaluate mux routing, timing, leakage, and replacement decisions without relying solely on a distributor catalog summary.
Alternatives de remplacement direct pour DG408AK — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
DG408AK/883B
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG408AK/883
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG408AK-E3
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG408AK Spécifications
| Multiplexer Configuration | 8:1 or dual 4:1 |
| Number of Channels | 8 analog channels |
| On-Resistance | 100 ohm maximum |
| Guaranteed On-Resistance | 8 ohm maximum |
| On-Resistance Flatness | 9 ohm maximum |
| Charge Injection | 20 pC typical; 15 pC maximum |
| Transition Time | 160 ns |
| Courant d'alimentation | 10 mA |
| Maximum Supply Voltage | 44 V |
| Logic Compatibility | TTL/CMOS compatible |
| Select Input Count | 3 binary select inputs |
| Input Off-Leakage | 100 ohm maximum; 5 nA maximum at 85 C |
| Power Consumption | 1.25 mW maximum |
| ESD Protection | Greater than 2000 V per IEC |
| Boîtier | 16-pin CERDIP through-hole package |
| Nombre de broches | 16 pins |
Configuration des broches de DG408AK
| Broche 1 | V+ — Positive supply input |
| Broche 2 | S0 — Address select input 0 |
| Broche 3 | S1 — Address select input 1 |
| Broche 4 | S2 — Address select input 2 |
| Broche 5 | V- — Negative supply or ground reference |
| Broche 6 | D0 — Analog drain terminal 0 |
| Broche 7 | D1 — Analog drain terminal 1 |
| Broche 8 | D2 — Analog drain terminal 2 |
| Broche 9 | EN — Enable input |
| Broche 10 | S3 — Mode or select input 3 |
| Broche 11 | D3 — Analog drain terminal 3 |
| Broche 12 | D4 — Analog drain terminal 4 |
| Broche 13 | D5 — Analog drain terminal 5 |
| Broche 14 | D6 — Analog drain terminal 6 |
| Broche 15 | D7 — Analog drain terminal 7 |
| Broche 16 | DG — Logic ground or drain ground reference |
Applications typiques
DG408AK convient pour 6 applications: Multichannel Data-Acquisition Systems, Battery and Power-Supply Monitoring, Test and Measurement Signal Routing, Industrial Sensor Multiplexing, Communications Signal Demultiplexing, Audio and Analog Signal Selection.
Multichannel Data-Acquisition Systems
The DG408AK fits data-acquisition front ends that must connect several sensor or divider outputs to one measurement channel. Its 8:1 routing, 160 ns transition time, and 100 ohm maximum on-resistance allow the acquisition system to share an amplifier or converter while controlling channel-selection latency. The 15 pC maximum charge injection in the improved configuration matters when the mux output feeds a high-impedance amplifier, so select-edge rate control or an acquisition-mode RC filter should be evaluated. The 16-pin CERDIP package also favors rugged, through-hole instrumentation systems requiring straightforward leaded assembly.
Recommandé
Battery and Power-Supply Monitoring
The DG408AK can route multiple battery-cell or supply-rail taps into one measurement amplifier for supervisory circuitry. Its 44 V maximum supply rating accommodates single-supply systems above common 12 V rails, while the 5 nA maximum input off-leakage at 85 degrees Celsius helps reduce loading of high-impedance dividers. Because the typical charge injection is 20 pC, a protection resistor and input filter should be sized to limit the transient reaching the measurement node without materially degrading accuracy.
Recommandé
Test and Measurement Signal Routing
The DG408AK is suitable for test systems that route several inputs to a shared meter, amplifier, or comparator. Its 160 ns transition time supports reasonably fast channel changes, and the improved family specification guarantees on-resistance flatness to 9 ohm, helping limit gain error across a selected channel. Designers should include guard time between address changes and the measurement, particularly when the instrument input impedance is high and the 20 pC typical charge injection could create a transient.
Recommandé
Industrial Sensor Multiplexing
The DG408AK can consolidate temperature, pressure, position, and discrete analog inputs into one controller input channel. Its 8-channel arrangement reduces the number of analog inputs required by the controller, while the dual 4:1 mode can support two measurement channels when differential pairs must remain separate. The ceramic-DIP construction is useful in leaded industrial equipment, but the final design must verify the exact operating-temperature grade and provide filtering to control the 20 pC typical switching charge.
Recommandé
Communications Signal Demultiplexing
The DG408AK can demultiplex sampled or control signals from multiple sources toward a common receiver, provided the selected signal bandwidth and logic timing meet the 160 ns transition specification. Its TTL/CMOS-compatible selection logic simplifies interfacing with digital controllers, and the 10 mA supply-current characteristic supports low-power mixed-signal equipment. Signal integrity remains the primary concern: keep mux traces short, provide a continuous ground reference, and avoid routing the address lines beneath sensitive analog paths to reduce injected transient coupling.
Recommandé
Audio and Analog Signal Selection
The DG408AK can select audio or other low-frequency analog sources into a common processing chain when channel isolation and settling time meet the design requirement. The 100 ohm maximum on-resistance should be compared with the source and load impedance because it can create attenuation, while the 20 pC typical charge injection can produce a switching click that may be audible in some high-gain audio paths. Slowing the select-input edges and adding a suitable post-mux filter can improve channel-to-channel isolation without changing the routing architecture.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DG408AK — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DG408AK/883B | DG408AK/883 | DG408AK-E3 |
|---|---|---|---|---|
| Package | 16-CERDIP | 16-CERDIP | 16-CERDIP | 16-DIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Vishay Intertechnology |
| Multiplexer Configuration | 8:1 or dual 4:1 | 8:1 or dual 4:1 | 8:1 or dual 4:1 | 8:1 or dual 4:1 |
| Channel Count | 8 channels | 8 channels | 8 channels | 8 channels |
| Maximum On-Resistance | 100 ohm | 100 ohm | 100 ohm | 100 ohm |
| Charge Injection | 20 pC typical | 20 pC typical | 20 pC typical | 20 pC typical |
| Transition Time | 160 ns | 160 ns | 160 ns | 160 ns |
| Supply Current | 10 mA | 10 mA | 10 mA | 10 mA |
| Maximum Supply Voltage | 44 V | 44 V | 44 V | 44 V |
| Logic Compatibility | TTL/CMOS compatible | TTL/CMOS compatible | TTL/CMOS compatible | TTL/CMOS compatible |
| Qualification Suffix | AK | AK/883B | AK/883 | AK-E3 |
Principaux différenciateurs
- Direct 8:1 and dual 4:1 routing in one package (vs DG408AK/883B)
- High-speed channel transition capability (vs DG408AK/883)
- Single-supply compatibility for leaded mixed-signal equipment (vs DG408AK-E3)
Notes de conception
Account for the DG408AK charge injection when driving high-impedance nodes. The published value is 20 pC typical and 15 pC maximum for the improved family configuration. Slow the select-input edges with suitable series resistance, allow the switched node to settle, and add a low-leakage input filter when the measurement front end cannot tolerate a switching transient.
Route the common terminal and analog drain lines away from the three address inputs and enable line to reduce capacitive coupling between fast control edges and sensitive signals. Keep the CERDIP ground and supply-return connections close to their pins, use a low-impedance ground plane, and avoid placing long analog routes beneath the package unless the board stack and return path are controlled.
Decouple the supply locally and maintain a low-impedance reference between V+ and V-. The family is specified for 10 mA supply current and a 44 V maximum supply rating, but the installed design should avoid transients at the supply pin and protect unused control inputs if they can float. Verify the selected suffix's absolute maximum ratings before applying the full 44 V range.
Do not treat every DG408-family suffix as mechanically and qualification-compatible without checking the ordering code. A ceramic DIP, narrow PDIP, and SOIC option use the same family name but require different PCB footprints. Confirm the 16-pin CERDIP pin map, temperature grade, qualification conditions, and lead configuration before approving a substitution.
Informations de conformité
The DG408 family documentation states ESD protection greater than 2000 V per IEC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals status was not established for this ordering suffix.