Analog Devices

DG408AK - 8:1 CMOS Analog Multiplexer | Analog Devices

MPN: DG408AK ✓ Aktif
10 mA Vdss 100 ohm maximum Rds(on) 16-pin CERDIP through-hole package Package
MOQ: 1 |

DG408AK Genel Bakış

Analog Devices DG408AK is a high-performance 8-channel or dual 4-channel CMOS analog multiplexer with 100 ohm maximum on-resistance, 20 pC charge injection, 160 ns transition time, and 10 mA supply current. The device is supplied in a 16-pin CERDIP through-hole package and operates from a single supply, with a maximum supply rating of 44 V.

An analog multiplexer is a semiconductor switch that connects one of several analog inputs to a common output. It belongs to the interface IC hierarchy, where it sits between sensors, measurement circuits, data converters, and system control logic. The DG408AK uses three binary select inputs and an enable input to route one of eight channels. It can also be configured as two independent 4-channel multiplexers.

Key electrical characteristics include 100 ohm maximum on-resistance, 15 pC maximum charge injection, and a 160 ns transition time. The DG408 family provides TTL-compatible logic control, low power consumption, reduced switching errors, and rail-to-rail signal handling. An improved configuration limits guaranteed on-resistance to 8 ohm and on-resistance flatness to 9 ohm, while input leakage is specified at no more than 100 ohm and 5 nA at 85 degrees Celsius.

The DG408AK combines an eight-element CMOS analog-switch array with TTL/CMOS-compatible decoding circuitry and an enable function for cascading or externally controlled devices. Its 3-bit address interface supports straightforward binary channel selection. The switching architecture can be used for multiplexed or demultiplexed signal routing, allowing one measurement amplifier or converter to serve several input channels.

Typical uses include data acquisition, instrumentation, battery monitoring, test-equipment signal routing, industrial control, and communications systems. The 44 V maximum supply rating makes the device suitable for systems operating from a single positive supply, while the low-noise switching characteristics help preserve fidelity in high-impedance measurement paths.

PCB design should keep analog traces short and provide a stable ground reference. Place input and output decoupling close to the device, route switch-control signals away from sensitive analog nets, and use a common-ground return strategy to minimize switching transients. The manufacturer datasheet pin-description table should be used when assigning all 16 package connections.

This product record combines manufacturer specifications, verified package and channel details, pin-level implementation guidance, and clearly qualified drop-in comparisons. It is intended to help engineers evaluate mux routing, timing, leakage, and replacement decisions without relying solely on a distributor catalog summary.

Drop-in alternatifler için DG408AK — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

DG408AK/883B

✅ Yerleştirme
📦 16-CERDIP
Same 100 ohm maximum on-resistance, 20 pC charge injection, 160 ns transition time, and 44 V maximum supply rating; qualification suffix differs by 0% in the compared core electrical ratings.

📋 Katalogda Olmayan Referans Alternatifi

DG408AK/883

✅ Yerleştirme
📦 16-CERDIP
Same 100 ohm maximum on-resistance, 20 pC charge injection, 160 ns transition time, and 44 V maximum supply rating; the ordering qualification suffix differs by 0% in the compared core electrical ratings.

📋 Katalogda Olmayan Referans Alternatifi

DG408AK-E3

✅ Yerleştirme
📦 16-DIP
Same DG408AK family ratings of 100 ohm maximum on-resistance, 20 pC charge injection, 160 ns transition time, and 44 V maximum supply rating; the E3 finish designation changes ordering configuration by 0% in the compared core electrical ratings.

📋 Katalogda Olmayan Referans Alternatifi

DG408AK Özellikler

Multiplexer Configuration 8:1 or dual 4:1
Number of Channels 8 analog channels
On-Resistance 100 ohm maximum
Guaranteed On-Resistance 8 ohm maximum
On-Resistance Flatness 9 ohm maximum
Charge Injection 20 pC typical; 15 pC maximum
Transition Time 160 ns
Besleme Akımı 10 mA
Maximum Supply Voltage 44 V
Logic Compatibility TTL/CMOS compatible
Select Input Count 3 binary select inputs
Input Off-Leakage 100 ohm maximum; 5 nA maximum at 85 C
Power Consumption 1.25 mW maximum
ESD Protection Greater than 2000 V per IEC
Paket 16-pin CERDIP through-hole package
Pin Sayısı 16 pins

DG408AK Pin Yapısı

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Pin 1 V+ — Positive supply input
Pin 2 S0 — Address select input 0
Pin 3 S1 — Address select input 1
Pin 4 S2 — Address select input 2
Pin 5 V- — Negative supply or ground reference
Pin 6 D0 — Analog drain terminal 0
Pin 7 D1 — Analog drain terminal 1
Pin 8 D2 — Analog drain terminal 2
Pin 9 EN — Enable input
Pin 10 S3 — Mode or select input 3
Pin 11 D3 — Analog drain terminal 3
Pin 12 D4 — Analog drain terminal 4
Pin 13 D5 — Analog drain terminal 5
Pin 14 D6 — Analog drain terminal 6
Pin 15 D7 — Analog drain terminal 7
Pin 16 DG — Logic ground or drain ground reference

Tipik Uygulamalar

DG408AK için uygundur 6 uygulamas: Multichannel Data-Acquisition Systems, Battery and Power-Supply Monitoring, Test and Measurement Signal Routing, Industrial Sensor Multiplexing, Communications Signal Demultiplexing, Audio and Analog Signal Selection.

🖥️

Multichannel Data-Acquisition Systems

The DG408AK fits data-acquisition front ends that must connect several sensor or divider outputs to one measurement channel. Its 8:1 routing, 160 ns transition time, and 100 ohm maximum on-resistance allow the acquisition system to share an amplifier or converter while controlling channel-selection latency. The 15 pC maximum charge injection in the improved configuration matters when the mux output feeds a high-impedance amplifier, so select-edge rate control or an acquisition-mode RC filter should be evaluated. The 16-pin CERDIP package also favors rugged, through-hole instrumentation systems requiring straightforward leaded assembly.

⚡

Battery and Power-Supply Monitoring

The DG408AK can route multiple battery-cell or supply-rail taps into one measurement amplifier for supervisory circuitry. Its 44 V maximum supply rating accommodates single-supply systems above common 12 V rails, while the 5 nA maximum input off-leakage at 85 degrees Celsius helps reduce loading of high-impedance dividers. Because the typical charge injection is 20 pC, a protection resistor and input filter should be sized to limit the transient reaching the measurement node without materially degrading accuracy.

🔧

Test and Measurement Signal Routing

The DG408AK is suitable for test systems that route several inputs to a shared meter, amplifier, or comparator. Its 160 ns transition time supports reasonably fast channel changes, and the improved family specification guarantees on-resistance flatness to 9 ohm, helping limit gain error across a selected channel. Designers should include guard time between address changes and the measurement, particularly when the instrument input impedance is high and the 20 pC typical charge injection could create a transient.

🏭

Industrial Sensor Multiplexing

The DG408AK can consolidate temperature, pressure, position, and discrete analog inputs into one controller input channel. Its 8-channel arrangement reduces the number of analog inputs required by the controller, while the dual 4:1 mode can support two measurement channels when differential pairs must remain separate. The ceramic-DIP construction is useful in leaded industrial equipment, but the final design must verify the exact operating-temperature grade and provide filtering to control the 20 pC typical switching charge.

🌐

Communications Signal Demultiplexing

The DG408AK can demultiplex sampled or control signals from multiple sources toward a common receiver, provided the selected signal bandwidth and logic timing meet the 160 ns transition specification. Its TTL/CMOS-compatible selection logic simplifies interfacing with digital controllers, and the 10 mA supply-current characteristic supports low-power mixed-signal equipment. Signal integrity remains the primary concern: keep mux traces short, provide a continuous ground reference, and avoid routing the address lines beneath sensitive analog paths to reduce injected transient coupling.

🎧

Audio and Analog Signal Selection

The DG408AK can select audio or other low-frequency analog sources into a common processing chain when channel isolation and settling time meet the design requirement. The 100 ohm maximum on-resistance should be compared with the source and load impedance because it can create attenuation, while the 20 pC typical charge injection can produce a switching click that may be audible in some high-gain audio paths. Slowing the select-input edges and adding a suitable post-mux filter can improve channel-to-channel isolation without changing the routing architecture.

Önerilen Ürünler Özeti

DG408AK/883B Qualified DG408-family ceramic-DIP option Kullanıldığı Yer: Multichannel Data-Acquisition Systems, Battery and Power-Supply Monitoring, Test and Measurement Signal Routing, Industrial Sensor Multiplexing, Communications Signal Demultiplexing, Audio and Analog Signal Selection DG408AK-E3 DG408-family alternate ordering suffix Kullanıldığı Yer: Multichannel Data-Acquisition Systems, Battery and Power-Supply Monitoring, Industrial Sensor Multiplexing, Communications Signal Demultiplexing, Audio and Analog Signal Selection DG408AK/883 Matching DG408 family ordering option Kullanıldığı Yer: Test and Measurement Signal Routing
What is the operating voltage of DG408AK?
The DG408AK supports a single positive supply and has a maximum supply rating of 44 V. According to the Analog Devices DG408 datasheet, the device is designed for TTL-compatible or CMOS-compatible address and enable logic. Designers should keep the actual supply below the 44 V absolute maximum and observe the operating-temperature and supply limits listed for the selected package variant.
What are the key specifications of DG408AK that engineers should know?
The DG408AK is an 8-channel or dual 4-channel CMOS analog multiplexer with 100 ohm maximum on-resistance, 20 pC typical charge injection, 160 ns transition time, 10 mA supply current, and a 44 V maximum supply rating. According to the Analog Devices DG408 datasheet, its improved configuration also specifies 8 ohm maximum guaranteed on-resistance, 9 ohm maximum flatness, and 15 pC maximum charge injection.
How many channels does DG408AK have?
The DG408AK provides eight analog channels that can be routed as one 8:1 multiplexer or two independent 4:1 multiplexers. Three binary select inputs address the channels, while an enable input provides device-level control. According to the Analog Devices DG408 datasheet, this arrangement allows the same switch array to support both single-ended multiplexing and paired measurement circuits.
What is the on-resistance of DG408AK?
The DG408AK has a nominal maximum on-resistance specification of 100 ohm, with an improved configuration guaranteeing 8 ohm maximum on-resistance and 9 ohm maximum flatness. According to the Analog Devices DG408 datasheet, on-resistance affects signal attenuation and insertion loss, so source impedance, load impedance, and operating current should be evaluated together when specifying the mux for a precision analog path.
Where can I download the DG408AK datasheet PDF?
The official DG408AK product documentation is available from the Analog Devices DG408 product page at https://www.analog.com/en/products/dg408.html. The page provides the manufacturer datasheet and product documentation. Use the pin-description table in the datasheet when assigning the 16 CERDIP connections, especially the supply, enable, select, common, and drain pins.
Where can I find the DG408AK pinout?
The DG408AK pinout is shown in the pin-configuration section of the Analog Devices DG408 datasheet. The 16-pin CERDIP includes three select inputs, an enable input, one common terminal for single-ended multiplexing, eight drain terminals, a positive supply, a negative or ground reference, and the logic ground. Follow the numbered pin table rather than inferring connections from a generic mux drawing.
What can replace the DG408AK?
The closest verified replacement choices are DG408AK/883B, DG408AK/883, and DG408AK-E3 when their package and qualification requirements match the original design. All retain the DG408AK electrical function and 16-pin through-hole architecture. Verify the manufacturer pin table, temperature grade, lead finish, and lifecycle status before treating any suffix variant as a production drop-in replacement.
Is DG408AK/883B a drop-in replacement for DG408AK?
DG408AK/883B is a pin-compatible DG408-family option when the original board uses the matching 16-pin CERDIP footprint and the design can accept its qualification conditions. According to the Analog Devices product information, it retains the 8:1 or dual 4:1 routing function, 100 ohm maximum on-resistance, 20 pC charge injection, and 160 ns transition time. Qualification and grade details still require review.
Is the Vishay DG408AK-E3 equivalent to the Analog Devices DG408AK?
The Vishay DG408AK-E3 and Analog Devices DG408AK represent closely related DG408 options, but interchangeability depends on the exact footprint, temperature grade, qualification status, and lead-finish requirements. Both use the DG408AK family naming and provide an 8:1 or dual 4:1 CMOS multiplexing function. The board footprint and production requirements should be checked before substitution.
DG408AK vs DG408AK/883B — which is better for military or rugged systems?
DG408AK/883B is generally the more relevant candidate when a design calls for the DG408 family in a rugged ceramic-DIP construction, while the standard DG408AK may be preferable for ordinary industrial or commercial installations. The comparison must also account for qualification status, temperature grade, availability, and exact ordering suffix. Both devices retain the same core 8-channel multiplexing architecture.
When should I choose DG408AK over DG408AK-E3?
Choose the standard DG408AK when its documented operating grade and lead configuration meet the product requirements and no special finish or sourcing condition is needed. Choose DG408AK-E3 when its documented environmental or material-finish attributes are required for the target program. Because the two suffix options can differ in qualification and ordering conditions, compare the manufacturer ordering information before releasing the BOM.
Is DG408AK suitable for high-impedance sensor measurement?
The DG408AK can be used for multiplexed sensor measurement when its leakage, on-resistance, and charge-injection behavior remain acceptable for the selected source impedance. Its 5 nA maximum input off-leakage at 85 degrees Celsius helps preserve high-impedance signals, while 20 pC typical charge injection can create transients on fast-rising nodes. Slowing switch-control edges and adding guard structures can reduce measurement errors.
What design considerations apply to DG408AK charge injection?
The DG408AK charge injection can create a voltage transient when the control inputs change state. Its published value is 20 pC typical, with a 15 pC maximum in the improved DG408 configuration. High-impedance or fast-settling systems should account for this energy at the mux output, use controlled select transitions, and provide suitable downstream filtering when measurement accuracy is more important than acquisition speed.
How much power does DG408AK consume?
The Analog Devices DG408 product information specifies low power consumption of 1.25 mW maximum for the improved configuration, while the family description also identifies 10 mA supply current as a key characteristic. Actual consumption depends on the applied supply voltage, logic state, and channel condition. Confirm the exact limit and test conditions for the selected ordering variant in the manufacturer datasheet.
Where can I buy DG408AK and check its price?
Use the Request a Quote form on this page to request DG408AK pricing, stock confirmation, lead time, and order quantity. The part is an 8-channel CMOS analog multiplexer in a 16-pin CERDIP package, with 100 ohm maximum on-resistance and a 44 V maximum supply rating. For an engineering substitution, include the required package, qualification, temperature range, and acceptable lead time in the request.
What is the lead time for DG408AK?
Request the current DG408AK lead time through the Request a Quote form on this page. Lead time can vary with manufacturer inventory, package configuration, qualification status, order quantity, and production schedule. Engineers should state the exact MPN, annual and prototype quantities, acceptable date codes, and whether the ceramic-DIP package is mandatory when requesting a delivery commitment.

Mühendislik referans verileri: DG408AK — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the DG408AK when a system needs a through-hole 8-channel CMOS analog mux with a 16-pin CERDIP footprint, 100 ohm maximum on-resistance, and TTL/CMOS-compatible selection logic. DG408AK/883B and DG408AK/883 are the closest same-family alternatives because their core channel, resistance, charge-injection, transition-time, and supply ratings match; select them when their qualification and ordering conditions better fit the program. DG408AK-E3 is a cross-manufacturer family option with matching core electrical ratings, but it should be accepted only after confirming the ceramic-DIP footprint, operating grade, and qualification. Parts such as DG408DY+ or DG408CJ+ were not classified as drop-in alternatives because their package constructions differ. For all choices, verify the operating-temperature range, qualification requirements, and exact pin assignment before production release.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün DG408AK/883B DG408AK/883 DG408AK-E3
Package 16-CERDIP 16-CERDIP 16-CERDIP 16-DIP
Brand Analog Devices Analog Devices Analog Devices Vishay Intertechnology
Multiplexer Configuration 8:1 or dual 4:1 8:1 or dual 4:1 8:1 or dual 4:1 8:1 or dual 4:1
Channel Count 8 channels 8 channels 8 channels 8 channels
Maximum On-Resistance 100 ohm 100 ohm 100 ohm 100 ohm
Charge Injection 20 pC typical 20 pC typical 20 pC typical 20 pC typical
Transition Time 160 ns 160 ns 160 ns 160 ns
Supply Current 10 mA 10 mA 10 mA 10 mA
Maximum Supply Voltage 44 V 44 V 44 V 44 V
Logic Compatibility TTL/CMOS compatible TTL/CMOS compatible TTL/CMOS compatible TTL/CMOS compatible
Qualification Suffix AK AK/883B AK/883 AK-E3

Ana Farklılayıcılar

  • Direct 8:1 and dual 4:1 routing in one package (karşılaştırma:DG408AK/883B)
  • High-speed channel transition capability (karşılaştırma:DG408AK/883)
  • Single-supply compatibility for leaded mixed-signal equipment (karşılaştırma:DG408AK-E3)

Tasarım Notları

Account for the DG408AK charge injection when driving high-impedance nodes. The published value is 20 pC typical and 15 pC maximum for the improved family configuration. Slow the select-input edges with suitable series resistance, allow the switched node to settle, and add a low-leakage input filter when the measurement front end cannot tolerate a switching transient.

Route the common terminal and analog drain lines away from the three address inputs and enable line to reduce capacitive coupling between fast control edges and sensitive signals. Keep the CERDIP ground and supply-return connections close to their pins, use a low-impedance ground plane, and avoid placing long analog routes beneath the package unless the board stack and return path are controlled.

Decouple the supply locally and maintain a low-impedance reference between V+ and V-. The family is specified for 10 mA supply current and a 44 V maximum supply rating, but the installed design should avoid transients at the supply pin and protect unused control inputs if they can float. Verify the selected suffix's absolute maximum ratings before applying the full 44 V range.

Do not treat every DG408-family suffix as mechanically and qualification-compatible without checking the ordering code. A ceramic DIP, narrow PDIP, and SOIC option use the same family name but require different PCB footprints. Confirm the 16-pin CERDIP pin map, temperature grade, qualification conditions, and lead configuration before approving a substitution.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The DG408 family documentation states ESD protection greater than 2000 V per IEC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals status was not established for this ordering suffix.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

DG408AK datasheet DG408AK pinout DG408AK datasheet pdf DG408AK 16-CERDIP pinout DG408AK 8:1 analog multiplexer DG408AK 100 ohm on resistance DG408AK drop-in replacement DG408AK equivalent multiplexer DG408AK vs DG408AK-E3 DG408AK application circuit DG408AK price DG408AK stock Analog Devices DG408AK DG408AK charge injection DG408AK lead time

İlgili Bileşenler ve Terimler

Analog Devices DG408AK DG408AK/883B DG408AK/883 DG408AK-E3 Vishay Intertechnology CMOS analog multiplexer analog switch interface IC semiconductor 8:1 multiplexer dual 4:1 multiplexer TTL-compatible logic CMOS-compatible logic on-resistance charge injection transition time input off-leakage 16-pin CERDIP CERDIP package DIP package through-hole package single supply operation rail-to-rail signal handling IEC ESD protection
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle