Analog Devices

DG411FDY+ - Quad Fault-Protected SPST Switch | Analog Devices

Référence : DG411FDY+ ✓ Actif
4.5 V to 20 V Vdss 35 ohm Rds(on) 16-pin SOIC Package
MOQ : 1 |

DG411FDY+ Présentation

The Analog Devices DG411FDY+ is a quad, rail-to-rail, fault-protected SPST analog switch with four independent 1:1 switch circuits, a maximum on-resistance of 35 ohms, and a 16-pin SOIC package. Its listed dual supply operating range is -20 V to -4.5 V and 4.5 V to 20 V, with an extended range up to 36 V, while the supported temperature interval is -40°C to +85°C.

An analog switch is a semiconductor device that routes signals between terminals under digital control. The DG411F family belongs to the analog switch and multiplexer hierarchy, where SPST means single-pole, single-throw and 1:1 means the conducting path connects one terminal to one terminal rather than selecting among multiple channels. Fault-protected, rail-to-rail construction is useful when signals may approach the supply rails or exceed the normal operating range during fault conditions.

The DG411FDY+ provides four independently controlled switches in one 16-SOIC package. The distributor listing identifies 220 ns turn-on time, 160 ns turn-off time, and 47 pF input capacitance. Its 35-ohm maximum on-resistance supports low-voltage analog routing, while the four-circuit arrangement reduces component count when several signals must be isolated, sampled, or connected to instrumentation.

The device is specified for positive and negative supply operation from 4.5 V to 20 V and -20 V to -4.5 V, with operation extending to 36 V in one supply arrangement. These rail-to-rail capabilities make the switches suitable for bipolar analog signals and systems whose signal range is close to the available supply voltage. Operating temperature is -40°C to +85°C, allowing use in industrial and extended-temperature equipment.

Typical uses include test and measurement input selection, sensor multiplexing, audio signal routing, data-acquisition systems, and analog isolation networks. The DG411FDY+ is particularly appropriate when four independent signal paths are required and a conventional mechanical relay would be too large, slow, or power-hungry. Its 220 ns turn-on and 160 ns turn-off characteristics also make it more responsive than electromechanical switching at signal frequencies where those transition times matter.

PCB design should preserve the pinout and pin numbering shown in the manufacturer datasheet, provide a continuous ground reference, and route sensitive analog traces away from switching nodes and digital control lines. Check signal amplitude against the negative and positive supply limits, verify the operating voltage before enabling a switch, and account for capacitance when driving long traces or high-impedance sources.

This product page combines the manufacturer device description with practical selection, application, replacement, and PCB guidance. It also distinguishes pin-compatible ordering options from alternatives that use a different package, helping engineers evaluate replacement choices before committing to a board layout.

Alternatives de remplacement direct pour DG411FDY+ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec DG411FDY+ (même facteur de forme et même empreinte) — différant par Number of Switches, Package, RoHS Status, Switch Configuration.

Vishay Intertechnology
Number of Switches: 4 (quad)
Package: 16-SOIC (0.154 in, 3.90 mm width)
RoHS Status: RoHS Compliant
Comparer avec DG411FDY+ →

DG411FDY-T

✅ Remplacement direct
📦 16-SOIC
Ordering suffix differs, while the listed circuit count remains 4, configuration remains 1:1, on-resistance remains 35 ohm, and package remains 16-SOIC, giving a 0 ohm on-resistance difference.

📋 Alternative de référence (hors catalogue)

DG411DY-E3

✅ Remplacement direct
Vishay Intertechnology
📦 16-SOIC
Precision Monolithic Quad SPST CMOS Analog Switch · 4 (quad) · SPST, 1:1 (four independent) · 35 Ohm · CMOS · 0.35 uW (low power) · TTL and CMOS compatible · 15 V / 18 V / 24 V / 28 V class (per distributor listing)

Contactez-nous pour le prix

Voir la fiche technique →

DG411FDY+ Valeurs maximales et caractéristiques électriques

Number of Switches 4 circuits
Switch Configuration 1:1 SPST
Maximum On-Resistance 35 ohm
Positive Supply Range 4.5 V to 20 V
Negative Supply Range -20 V to -4.5 V
Maximum Supply Voltage 36 V
Turn-On Time 220 ns
Turn-Off Time 160 ns
Capacité d'entrée 47 pF
Température de fonctionnement -40°C to +85°C
Boîtier 16-pin SOIC
Type de montage Surface mount
Signal Range Rail-to-rail
Fault Protection Supported
Statut RoHS Compliant

Guide de configuration des broches du DG411FDY+ 16-pin soic

Configuration des broches du DG411FDY+ (boîtier 16-pin soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-pin soic pour le DG411FDY+

Aucune donnée de brochage détaillée disponible pour DG411FDY+.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

DG411FDY+ convient pour 6 applications: Test and Measurement Signal Routing, Sensor Signal Multiplexing, Audio Signal Switching, Data Acquisition Front End, Industrial Control Signal Isolation, Automated Test Fixture.

🖥️

Test and Measurement Signal Routing

The DG411FDY+ fits four-channel routing between a source under test and instrumentation because it combines four independent SPST paths with a listed 35-ohm maximum on-resistance. Its 220 ns turn-on and 160 ns turn-off times allow the switches to change connections quickly compared with electromechanical relays. Place the device close to the protected signal node, maintain a continuous ground plane, and use the pin-description table to assign each switch terminal. Input capacitance is listed at 47 pF, so source impedance and cable capacitance should be included when assessing rise time. This is particularly useful in automated test systems where keeping analog trace lengths short reduces susceptibility to pickup and crosstalk.

🧩

Sensor Signal Multiplexing

The DG411FDY+ can isolate or connect several sensor lines through its four independent 1:1 SPST switches, avoiding the shared-source behavior of a conventional multiplexer. The 35-ohm maximum on-resistance is appropriate for many low-frequency sensor interfaces, while the 47 pF listed input capacitance matters when driving high-impedance dividers or long shielded leads. Keep sensor returns over a continuous ground plane and place the switch close to the acquisition circuitry to minimize noise pickup. Engineers should verify that each sensor output remains within the -20 V to -4.5 V and 4.5 V to 20 V supply framework and should account for the 220 ns turn-on interval when sequencing measurements.

🎧

Audio Signal Switching

The DG411FDY+ is suitable for audio path selection in equipment that requires solid-state switching rather than a larger mechanical relay. Four independently controlled SPST circuits can connect microphone, line, or monitoring paths, and the 35-ohm maximum on-resistance introduces a defined series resistance that should be included in gain-loss calculations. The 47 pF input capacitance can influence high-frequency behavior with long PCB traces or cables, so sensitive audio nodes should remain compact. Its 160 ns turn-off and 220 ns turn-on times also support fast source selection. Fault protection improves robustness when an attached signal exceeds the intended operating range, although the datasheet absolute-maximum limits must still be respected.

📊

Data Acquisition Front End

The DG411FDY+ supports front-end channel isolation in data-acquisition equipment by placing four independently controlled analog switches between external inputs and measurement circuitry. Its low-voltage 35-ohm maximum on-resistance helps limit signal attenuation, and the short 220 ns turn-on and 160 ns turn-off transitions permit rapid acquisition sequencing. The 47 pF input capacitance should be checked against the selected amplifier’s stability and settling requirements. Use short analog traces, a solid reference plane, and controlled return paths to reduce conversion error. Confirm that each input amplitude remains within the manufacturer’s negative and positive supply specifications before the switch is enabled.

🏭

Industrial Control Signal Isolation

The DG411FDY+ can route low-voltage control or feedback signals in industrial equipment that requires solid-state isolation between circuit sections. Its four SPST switches, 35-ohm maximum on-resistance, and rail-to-rail signal capability make it appropriate for systems operating from 4.5 V to 20 V positive supplies or corresponding negative supplies. The fault-protected construction adds robustness, although it does not replace a safety-rated isolator when galvanic isolation is mandatory. PCB layout should keep high-energy switching loops away from the analog nodes and preserve uninterrupted ground references beneath the 16-pin SOIC. Review the -40°C to +85°C operating range against the enclosure temperature and thermal conditions.

🔧

Automated Test Fixture

The DG411FDY+ fits automated fixtures that connect a device under test to several measurement or support paths. Four independently controlled switches eliminate much of the wiring and relay count associated with a conventional fixture, while 220 ns turn-on and 160 ns turn-off times support rapid test sequencing. The 35-ohm maximum on-resistance should be included in impedance-sensitive measurements, and the listed 47 pF input capacitance can affect high-impedance probes and long fixture cables. Keep analog routing close to the connector or test node, provide a stable ground plane, and confirm that fixture transients remain within the absolute-maximum ratings before adding or removing test connections.

Récapitulatif des produits recommandés

DG411FDY+ Analog Devices Utilisé dans : Test and Measurement Signal Routing, Sensor Signal Multiplexing, Audio Signal Switching, Data Acquisition Front End, Industrial Control Signal Isolation, Automated Test Fixture DG411DY Pin-compatible cross-brand routing option Utilisé dans : Test and Measurement Signal Routing, Audio Signal Switching, Industrial Control Signal Isolation DG411FDY-T Same-family 16-SOIC routing option Utilisé dans : Sensor Signal Multiplexing, Data Acquisition Front End, Automated Test Fixture
Where can I buy DG411FDY+ online?
The DG411FDY+ can be requested through the Request a Quote form on this page. The Analog Devices manufacturer page identifies the DG411F family as production, while distributor records identify DG411FDY+ as a 16-SOIC device with four 1:1 switch circuits and 35-ohm maximum on-resistance. The quote form is the appropriate route for current order quantity, lead time, and supply confirmation.
What is the price of DG411FDY+?
Current DG411FDY+ pricing is displayed through the Request a Quote form on this page. The manufacturer page lists a family-level starting figure for the DG411F selection table, but that figure should not be treated as a confirmed quantity-break price for this exact ordering code. Submit the required part number and quantity to obtain a current quotation for the exact DG411FDY+ configuration.
What is the lead time for DG411FDY+?
The current lead time for DG411FDY+ is available through the Request a Quote form on this page. The Analog Devices product page identifies DG411F as a production family, but it does not publish a fixed lead-time interval for every package and quantity. The quote request should specify the desired quantity, tube packaging requirement, and production destination so the order can be scheduled accurately.
Is DG411FDY+ in stock?
Use the Request a Quote form on this page to check the current availability of DG411FDY+. The manufacturer lists the DG411F family as production, and distributor listings identify the DG411FDY+ ordering code, but those records do not establish a guaranteed warehouse balance for your requested quantity. The quote response should confirm current stock, scheduled delivery, and any minimum-order requirements.
What are the key specifications of DG411FDY+ that engineers should know?
The DG411FDY+ is a quad SPST analog switch with a 35-ohm maximum on-resistance, 220 ns turn-on time, 160 ns turn-off time, and 47 pF input capacitance. According to the Analog Devices DG411F product description, it provides four rail-to-rail, fault-protected 1:1 circuits in a 16-pin SOIC. Its listed operating temperature is -40°C to +85°C, and the device is RoHS compliant.
What is the operating voltage of DG411FDY+?
The DG411FDY+ operates from 4.5 V to 20 V on the positive supply and from -20 V to -4.5 V on the negative supply, with operation extending to 36 V in a listed single-supply arrangement. According to the Analog Devices DG411F family description, these ranges support positive, negative, and bipolar signal-routing systems while the fault-protected architecture improves robustness outside normal signal limits.
How many switches and channels does DG411FDY+ contain?
The DG411FDY+ contains four SPST switches, each configured as a 1:1 path. According to the Analog Devices DG411F datasheet description, this arrangement gives four independently controlled analog routes rather than a multiplexer that selects one of several inputs. It is therefore useful for signal isolation, routing to test equipment, and connecting multiple analog sources under digital control.
What is the on-resistance and switching time of DG411FDY+?
The DG411FDY+ has a maximum on-resistance of 35 ohms, a 220 ns turn-on time, and a 160 ns turn-off time. According to the manufacturer listing for the DG411F family, these values support low-voltage analog routing with faster transitions than electromechanical relays. Exact insertion loss and bandwidth should still be evaluated with the actual source impedance, load, capacitance, and operating frequency.
Is DG411FDY+ suitable for negative and bipolar signals?
Yes, the DG411FDY+ is suitable for negative and bipolar signal routing within its specified supply limits. The device supports a positive range of 4.5 V to 20 V and a negative range of -20 V to -4.5 V, while its rail-to-rail construction allows signals to approach the corresponding supply rails. Keep transient or fault voltages within the absolute maximum ratings stated in the manufacturer datasheet.
Where can I download the DG411FDY+ datasheet PDF?
The DG411FDY+ datasheet documentation begins on the Analog Devices DG411F product page at https://www.analog.com/en/products/dg411f.html. The DG411F datasheet identifies the family as quad, rail-to-rail, fault-protected SPST analog switches and includes the ordering information needed to interpret the FDY+ suffix. Use the pin-description and absolute-maximum-rating tables in that document before PCB release.
Where can I find the DG411FDY+ pinout?
The DG411FDY+ pinout is shown in the Analog Devices DG411F datasheet linked from the manufacturer product page. The device uses a 16-pin SOIC package, and its pin descriptions identify the four switch terminals and control connections. Use the numbered package drawing to assign PCB nets and observe the manufacturer pin-numbering orientation rather than inferring connections from the device outline.
DG411FDY+ vs DG411DY - which is better for a 16-SOIC analog switch?
DG411FDY+ and DG411DY both appear as 16-SOIC, four-circuit 1:1 analog switches with a listed maximum on-resistance of 35 ohms. DG411FDY+ is associated with Analog Devices and includes the + ordering designation, while DG411DY is listed under Renesas Electronics. The final choice should also account for lifecycle, control polarity, absolute-maximum ratings, and qualification requirements.
Can DG411DY replace DG411FDY+ in a 16-SOIC design?
DG411DY is a candidate drop-in replacement because its distributor listing identifies four 1:1 circuits, 35-ohm on-resistance, and a 16-SOIC package matching DG411FDY+. Before substitution, verify pin functions, control logic levels, switch configuration, supply limits, leakage, and absolute-maximum ratings in both manufacturer datasheets. The existing board footprint alone does not prove complete electrical equivalence.
What can replace DG411FDY+ without changing the PCB footprint?
DG411DY is the principal cross-brand replacement identified for the same 16-SOIC footprint, while DG411FDY-T is an ordering option also listed as a four-circuit 1:1, 35-ohm, 16-SOIC part. A footprint-compatible replacement must still be checked for identical pin functions and control polarity. Confirm temperature range, lifecycle status, and production qualification with the relevant manufacturer before releasing a substitution.
When should I choose DG411FDY+ instead of a mechanical relay?
Choose DG411FDY+ when the design needs four independent analog routes, solid-state switching speed, and a compact 16-SOIC implementation. Its listed 220 ns turn-on and 160 ns turn-off times are substantially faster than most electromechanical relays. The tradeoff is that the semiconductor switch does not provide the galvanic isolation commonly associated with a mechanical relay, so the system safety and isolation requirements must be evaluated separately.
What is the best Renesas equivalent for DG411FDY+?
DG411DY is the identified Renesas candidate for DG411FDY+ because distributor records list both as four-circuit, 1:1 analog switches with 35-ohm maximum on-resistance in a 16-SOIC package. According to the listed part descriptions, DG411DY is pin-compatible at the package and primary switch-configuration level. Confirm control polarity, absolute maximum ratings, leakage, and lifecycle status in the Renesas datasheet before using it as a production substitute.

Données de référence d'ingénierie pour DG411FDY+ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose DG411FDY+ for compact four-channel analog routing where independent SPST paths, a listed 35-ohm maximum on-resistance, and operation across positive and negative supply ranges are important. It is particularly suitable for test fixtures, sensor isolation, audio routing, and data-acquisition front ends where 220 ns turn-on and 160 ns turn-off times are advantageous. DG411FDY-T can be evaluated when the manufacturer ordering code meets the required temperature, packing, and procurement needs, but its qualification and lifecycle details should be confirmed. DG411DY is the identified Renesas alternative when its control polarity, pin functions, absolute-maximum ratings, and lifecycle status match the design. None of these choices provides the galvanic isolation of a mechanical relay; the DG411FDY+ is a low-voltage analog routing device rather than a safety-rated isolator.

Comparaison avec les alternatives

Paramètre Ce produit DG411FDY-T DG411DY
Brand Analog Devices Analog Devices Renesas Electronics
Package 16-SOIC 16-SOIC 16-SOIC
Number of Switches 4 circuits 4 circuits 4 circuits
Switch Configuration 1:1 SPST 1:1 SPST 1:1 SPST
Maximum On-Resistance 35 ohm 35 ohm 35 ohm

Principaux différenciateurs

  • Matches the listed primary electrical configuration of a cross-brand option (vs DG411DY)
  • Combines four independently controlled analog paths in one package (vs DG411FDY-T)
  • Supports negative and positive signal operation (vs DG411FDY-T)
  • Provides fast solid-state transitions (vs DG411DY)

Notes de conception

Place the DG411FDY+ close to the source and destination of the routed analog signals to minimize trace pickup and the effect of the listed 47 pF input capacitance. Route each switched signal away from digital control traces and switching-node copper, provide a continuous ground plane beneath the SOIC, and use the manufacturer pin-description table when assigning the four SPST paths. For high-impedance sources, keep the switched node short and avoid sharing a narrow trace between switch and measurement circuitry.

Do not treat the 35-ohm maximum on-resistance as the exact resistance at every signal voltage or temperature; the actual value depends on operating conditions. Likewise, confirm the absolute-maximum ratings for both positive and negative supplies, including transient limits. The listed 220 ns turn-on and 160 ns turn-off times do not guarantee complete settling at a particular frequency because external resistance, capacitance, and source impedance can extend the usable bandwidth.

Evaluate switched-path attenuation and settling with the actual source and load impedances rather than relying only on the maximum on-resistance. The 47 pF input capacitance is especially relevant for high-impedance sensors, long cables, and precision measurement nodes. Keep analog return paths continuous, avoid routing high-current outputs near the switch pins, and use short ground connections to reduce coupling between the four independently controlled circuits.

Design the supply rails for the complete operating environment. The device is listed for 4.5 V to 20 V positive and -20 V to -4.5 V negative supplies, with an extended arrangement reaching 36 V, but the appropriate configuration and exact limits must be checked in the manufacturer datasheet. Confirm that the control-signal levels remain compatible with the selected rail arrangement and that power-supply transients do not exceed the specified absolute maximum values.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS compliance is stated in the JLCPCB component record. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated for this ordering code.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

DG411FDY+ datasheet DG411FDY+ pinout DG411FDY+ datasheet pdf DG411FDY+ equivalent DG411FDY+ replacement DG411FDY+ cross reference DG411FDY+ vs DG411DY Analog Devices DG411FDY+ DG411FDY+ 16 SOIC pinout DG411FDY+ 35 ohm switch DG411FDY+ analog switch application DG411FDY+ price DG411FDY+ stock DG411FDY+ SPST switch

Composants & termes associés

Analog Devices DG411FDY+ DG411FDY-T DG411DY Renesas Electronics DG411F analog switch SPST switch single-pole single-throw fault-protected switch rail-to-rail operation on-resistance turn-on time turn-off time input capacitance 16-pin SOIC SOIC package surface-mount package semiconductor test and measurement sensor multiplexing data acquisition analog signal routing RoHS
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ