Texas Instruments

DP83848EVVX/NOPB 10/100 Ethernet PHY | Texas Instruments

Référence : DP83848EVVX/NOPB ✓ Actif
48-LQFP Package
MOQ : 1 |

DP83848EVVX/NOPB Présentation

Texas Instruments DP83848EVVX/NOPB is a 10/100-Mbps Ethernet physical-layer transceiver packaged in a 48-LQFP, 7 x 7 mm surface-mount package. It provides the physical-layer functions required to connect an Ethernet controller to a network transformer or media interface, supporting MII and RMII integrations. The device is associated with the DP83848I industrial Ethernet PHY family and is suitable for communications, industrial-control, test-equipment, embedded-network, and automation systems.

An Ethernet PHY is a semiconductor that converts digital data supplied by a MAC or Ethernet controller into electrical signaling for a wired network and receives incoming network signals for conversion back into digital data. In the hierarchy of electronic components, the DP83848EVVX/NOPB is an Ethernet interface transceiver, a network interface IC, and ultimately a semiconductor. Placing this function on a dedicated PHY can reduce the complexity of the host controller and support copper-based 10BASE-T and 100BASE-TX network connections.

The device is identified as a single transceiver with MII and RMII support. MII provides a parallel data interface between the PHY and a network controller, while RMII uses a reduced pin interface that can simplify connections with devices providing an RMII media-access controller. These interfaces make the DP83848EVVX/NOPB relevant to designs operating at either 10 Mbit/s or 100 Mbit/s, depending on the controller, network, and PHY configuration.

The 48-LQFP package exposes the complete transceiver interface and associated control functions in a standardized 7 x 7 mm footprint. The industrial-grade family listing identifies an operating temperature range of -40 °C to +85 °C for DP83848IVVX/NOPB, but the exact electrical limits and environmental ratings for every DP83848EVVX/NOPB variant must be confirmed in its manufacturer ordering information. The DP83848I family also includes SNI and JTAG support on identified variants.

Typical applications include industrial Ethernet controllers, factory automation equipment, embedded data-acquisition systems, network-interface adapters, instrumentation, and communications equipment. In each case, the PHY sits between the digital controller and the physical network medium, allowing the controller to use a digital MII or RMII interface while the DP83848EVVX/NOPB handles the network-facing signaling function.

PCB design should prioritize clean separation between digital interface traces and analog network-facing circuitry. The manufacturer datasheet and pin-description table should be used to assign supply, ground, clock, reset, management-interface, and media connections. Validate magnetics, termination, cable reach, link behavior, and electromagnetic-emissions requirements in the final board design rather than relying on generic Ethernet guidance alone.

This product summary combines package, interface, speed, and family-level operating information with engineering-focused application guidance and alternative-selection context. It is intended to help designers determine whether the DP83848EVVX/NOPB fits an existing PCB and network architecture before completing detailed signal-integrity, thermal, and regulatory verification.

Alternatives de remplacement direct pour DP83848EVVX/NOPB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec DP83848EVVX/NOPB (même facteur de forme et même empreinte) — différant par Product Type, Auto-Negotiation, Data Rate, JTAG Support, Operating Temperature.

Texas Instruments
Product Type: Single-port 10/100 Mb/s Ethernet PHY transceiver
JTAG Support: Yes
Operating Temperature: -40°C to 85°C
Texas Instruments
Product Type: Ethernet PHY Transceiver (PHYTER)
Auto-Negotiation: Yes (IEEE 802.3u)
Data Rate: 10/100 Mbps
Texas Instruments
Product Type: Single-port 10/100 Mb/s Ethernet PHY transceiver
Auto-Negotiation: IEEE 802.3 10 Mb/s and 100 Mb/s
JTAG Support: Supported

DP83848IVVX/NOPB

✅ Remplacement direct
Texas Instruments
📦 48-LQFP (PT)
Ethernet PHY Transceiver (PHYTER) · 10/100 Mbps · IEEE 802.3u (100BASE-TX, 10BASE-T) · 1/1 · 3.0 V to 3.6 V (single 3.3 V supply) · MII / RMII / SNI · Yes (crossover correction) · Yes (IEEE 802.3u)

Contactez-nous pour le prix

Voir la fiche technique →

DP83848VYB/NOPB

✅ Remplacement direct
Texas Instruments
📦 48-LQFP
Single-port 10/100 Mb/s Ethernet PHY transceiver · 10 Mb/s to 100 Mb/s · 3.0 V to 3.6 V · 92 mA · -40°C to +105°C · MII or RMII parallel interface · IEEE 802.3 10 Mb/s and 100 Mb/s · Supported according to IEEE 802.3

Contactez-nous pour le prix

Voir la fiche technique →

DP83848IVV/NOPB

✅ Remplacement direct
Texas Instruments
📦 48-LQFP
Single-port 10/100 Mb/s Ethernet PHY transceiver · 10 Mb/s and 100 Mb/s · 1/1 transceiver · Ethernet · IEEE 802.3u · 3 V to 3.6 V · Industrial temperature · -40°C to 85°C

Contactez-nous pour le prix

Voir la fiche technique →

DP83848EVVX/NOPB Spécifications

Product Type Ethernet PHY transceiver
Débit de données 10 Mbit/s and 100 Mbit/s
Transceiver Configuration 1/1 transceiver
Digital Interface MII and RMII
Package Type 48-LQFP
Package Dimensions 7 mm x 7 mm
Nombre de broches 48 pins
Type de montage Surface mount
Family Operating Temperature -40 °C to +85 °C for DP83848IVVX/NOPB
Family SNI Support Supported on DP83848IVVX/NOPB
Family JTAG Support Supported on DP83848IVVX/NOPB
Ethernet Media Copper 10BASE-T and 100BASE-TX

Guide de configuration des broches du DP83848EVVX/NOPB 7 mm x 7 mm

Configuration des broches du DP83848EVVX/NOPB (boîtier 7 mm x 7 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 7 mm x 7 mm pour le DP83848EVVX/NOPB

Aucune donnée de brochage détaillée disponible pour DP83848EVVX/NOPB.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

DP83848EVVX/NOPB convient pour 6 applications: Industrial Automation Controller, Embedded Network Data Acquisition, Test and Measurement Instrument, Factory Sensor Gateway, Communications Appliance, Network Interface Adapter.

🏭

Industrial Automation Controller

The DP83848EVVX/NOPB fits an industrial automation controller that connects a digital controller or MCU to a 10/100-Mbps copper Ethernet network. Its 10/100-Mbps capability supports both legacy and fast Ethernet network rates, while MII and RMII interfaces let the design choose between a parallel controller connection and a more compact reduced interface. The 48-LQFP package also provides a defined surface-mount footprint for multilayer control boards. Implementation should include manufacturer-recommended power decoupling, controlled clocking, proper reset behavior, and an Ethernet network-isolation or magnetics arrangement appropriate to the installation environment.

🖥️

Embedded Network Data Acquisition

The DP83848EVVX/NOPB is suitable for an embedded data-acquisition unit that must add wired 10/100-Mbps Ethernet without implementing the physical layer in a controller. A host processor or communications controller can connect through MII or RMII while the PHY provides the network-facing transceiver function. This division keeps high-speed digital traffic close to the controller while placing the Ethernet interface in a clearly defined circuit section. For long operating cycles and industrial installations, verify the exact temperature grade, power budget, isolation strategy, and electromagnetic-emissions requirements for the completed product.

🔧

Test and Measurement Instrument

The DP83848EVVX/NOPB can support Ethernet connectivity in test and measurement equipment that transfers instrument data over a 10/100-Mbps copper network. The selectable MII and RMII interfaces allow the instrument architecture to align with its FPGA, processor, or dedicated communication controller. Its 48-LQFP package is suitable for dense measurement instruments where a functional PHY is needed without relying on an Ethernet controller integrated into the main processing device. Designers should use the manufacturer reference layout, preserve clock and supply integrity, and validate network performance against the instrument's expected data rate and cable environment.

🧩

Factory Sensor Gateway

A factory sensor gateway can use the DP83848EVVX/NOPB to bridge an embedded host to a 10/100-Mbps Ethernet backbone. The PHY is appropriate when the gateway needs a dedicated copper-network interface and the host supports MII or RMII. Using RMII can reduce the number of digital interface traces, while MII may offer a more parallel connection where routing space is available. The 7 x 7 mm 48-LQFP package leaves room for other sensing and processing functions on a compact board. The final design should account for surge events, cable faults, grounding, and the industrial temperature range required at the installation site.

🌐

Communications Appliance

The DP83848EVVX/NOPB is applicable to communications appliances that require a dedicated 10/100-Mbps Ethernet physical layer. Depending on the appliance architecture, a communications processor can connect through MII for a parallel interface or RMII for a reduced pin-count interface. The dedicated PHY organization can simplify the processor's media-access responsibilities and provide a clear boundary between digital control logic and copper-network signaling. Engineers should confirm the exact clocking mode, configuration pins, management interface, and power requirements, then validate conducted emissions and network interoperability with the intended equipment ecosystem.

🔧

Network Interface Adapter

The DP83848EVVX/NOPB can serve as the central Ethernet PHY in a dedicated network-interface adapter for an embedded processor or FPGA platform. The 10/100-Mbps capability allows the adapter to support established copper Ethernet deployments, while MII and RMII provide flexibility in connecting the host logic. The 48-LQFP package offers a standard surface-mount assembly option and a 7 x 7 mm footprint that supports compact adapter boards. A successful implementation requires exact pin assignment, correct magnetics selection, controlled supply sequencing, return-path design, and testing for link establishment under the intended cable length and system noise conditions.

What is the DP83848EVVX/NOPB?
The DP83848EVVX/NOPB is a Texas Instruments 10/100-Mbps Ethernet PHY transceiver in a 48-LQFP package. According to the manufacturer product family page, the device is a single transceiver supporting MII and RMII controller interfaces. It connects a digital Ethernet controller to the physical copper-network interface, making it suitable for industrial communications and embedded networking equipment.
Where can I download the DP83848EVVX/NOPB datasheet PDF?
The official DP83848I product page on Texas Instruments is the appropriate starting point for the DP83848EVVX/NOPB datasheet and ordering information. The distributor results also identify a downloadable PDF copy. Use the manufacturer document corresponding to the exact DP83848EVVX/NOPB ordering code when checking pin functions, electrical limits, timing, and recommended application circuits.
Where can I find the DP83848EVVX/NOPB pinout?
The DP83848EVVX/NOPB pinout is found in the pin-configuration section of the manufacturer datasheet for the exact DP83848EVVX/NOPB ordering option. The part uses a 48-LQFP package with 7 x 7 mm dimensions. Use the package drawing and pin-description table together when assigning power, ground, management-interface, MII or RMII, reset, clock, and network-facing connections.
What are the key specifications of DP83848EVVX/NOPB that engineers should know?
The principal specifications of the DP83848EVVX/NOPB are 10/100-Mbps operation, a single-transceiver configuration, MII and RMII support, and a 48-LQFP, 7 x 7 mm package. According to the Texas Instruments product family page, an identified DP83848I industrial variant supports SNI and JTAG. Detailed voltage, timing, and current limits should be taken from the datasheet for the exact ordering code.
Is DP83848EVVX/NOPB suitable for industrial Ethernet equipment?
The DP83848EVVX/NOPB is appropriate for industrial Ethernet equipment because it belongs to the DP83848I transceiver family and supports MII and RMII interfaces at 10/100 Mbit/s. A related DP83848IVVX/NOPB listing identifies operation from -40 °C to +85 °C. Confirm the exact temperature grade and all operating limits for the selected ordering option before release.
What is the difference between MII and RMII support on DP83848EVVX/NOPB?
MII and RMII define different digital connections between an Ethernet controller and a PHY. MII uses more parallel signal lines, while RMII reduces the interface pin count and can simplify integration with compatible media-access controllers. The DP83848EVVX/NOPB supports both interfaces, according to distributor product descriptions, so the final controller and PCB requirements should determine which mode is used.
What is the best drop-in replacement for DP83848EVVX/NOPB?
DP83848IVVX/NOPB is the closest identified alternative because it is a 10/100-Mbps DP83848I transceiver in the same 48-LQFP, 7 x 7 mm package and includes SNI and JTAG support. Verify the exact ordering code, temperature grade, enable or strap configuration, and pin-level electrical requirements in the manufacturer datasheet before treating it as a drop-in replacement.
Can DP83848IVVX/NOPB replace DP83848EVVX/NOPB?
DP83848IVVX/NOPB can be a candidate replacement when the PCB accepts the identical 48-LQFP footprint and the required 10/100-Mbps, MII, and RMII functions remain unchanged. According to the manufacturer part-details listing, it supports SNI and JTAG and is specified for -40 °C to +85 °C. Review the exact DP83848EVVX/NOPB pin and option requirements before substitution.
Is DP83848EVVX/NOPB the same as DP83848VYB/NOPB?
DP83848EVVX/NOPB and DP83848VYB/NOPB are related DP83848 Ethernet PHY orderings, but they should not be assumed identical without checking their complete ordering tables. Differences can involve supported features, temperature grade, package code, or configuration. Compare the exact pin descriptions, electrical limits, and interface requirements in the manufacturer documentation before deciding whether a substitution is drop-in compatible.
When should I choose DP83848EVVX/NOPB over DP83848IVVX/NOPB?
Choose DP83848EVVX/NOPB when its exact ordering option, qualification, configuration, and lifecycle conditions match the intended design. Choose DP83848IVVX/NOPB when its documented industrial-temperature range, SNI support, and JTAG support are specifically required. Both are identified as 10/100-Mbps transceivers in 48-LQFP packages, so functional and mechanical similarity must be checked alongside ordering-specific differences.
Is DP83848EVVX/NOPB suitable for a factory automation controller?
The DP83848EVVX/NOPB is suitable for a factory automation controller when the system requires a dedicated 10/100-Mbps copper Ethernet PHY and an MII or RMII connection to its controller. Its 48-LQFP package supports compact controller-board integration. The design must also include suitable network magnetics, appropriate layout isolation, validated power rails, and compliance testing for the intended industrial environment.
What layout considerations matter for DP83848EVVX/NOPB?
The DP83848EVVX/NOPB layout should follow the manufacturer recommended application circuit and maintain clean separation between digital controller signals and network-facing circuitry. Keep high-current supply paths compact, provide appropriate decoupling, use a controlled clock and reset arrangement, and route sensitive analog or media-side nets away from switching nodes. Confirm all connections against the exact pin-description table before fabrication.
How much thermal dissipation should a DP83848EVVX/NOPB design allow for?
The exact thermal requirement must be calculated from the confirmed supply voltage, PHY current, and ambient temperature for the specific ordering code. Those electrical values are not stated in the accessible product listings, so they must be obtained from the manufacturer datasheet before estimating junction temperature. Then apply the package thermal information and account for copper area, airflow, and nearby heat sources on the assembled PCB.
Where can I buy DP83848EVVX/NOPB and check its price and lead time?
Use the Request a Quote form on this page to request the current DP83848EVVX/NOPB price, stock status, lead time, and order quantity. The available listings do not show a qualifying quantity-break table for this exact ordering code, so no static price tier is published here. Confirm the suffix, package, and temperature-grade requirements when submitting the request.
Is DP83848EVVX/NOPB currently available and active?
The DP83848EVVX/NOPB appears in current manufacturer-family and distributor search results, but exact stock and lifecycle status can change by ordering code and region. Request the current status through the Request a Quote form on this page. The manufacturer product page remains the authoritative place to confirm ordering information, data-sheet revisions, and any lifecycle notices.

Données de référence d'ingénierie pour DP83848EVVX/NOPB — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the DP83848EVVX/NOPB when the design requires a dedicated 10/100-Mbps copper Ethernet PHY with MII or RMII controller connectivity in a 48-LQFP footprint. Its identified package, interface set, and single-transceiver organization make it a practical fit for industrial controllers, gateways, test equipment, and embedded network adapters. Select DP83848IVVX/NOPB when the documented -40 °C to +85 °C range plus SNI and JTAG support are important, after confirming configuration compatibility with the existing board. Consider DP83848VYB/NOPB when its ordering-specific feature set and lifecycle position better match the design, but verify all pin and electrical requirements. DP83848IVV/NOPB is another same-family candidate with the same package class, but its exact ordering and packaging details must be reconciled before substitution. In every case, review the manufacturer ordering table and datasheet for the exact suffix, and do not approve a replacement based on package appearance alone.

Comparaison avec les alternatives

Paramètre Ce produit DP83848IVVX/NOPB DP83848VYB/NOPB DP83848IVV/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 48-LQFP (PT), 7 x 7 mm 48-LQFP (PT), 7 x 7 mm 48-LQFP 48-LQFP
Ethernet Speed 10/100 Mbit/s 10/100 Mbit/s 10/100 Mbit/s 10/100 Mbit/s
Mounting Type Surface mount Surface mount Surface mount Surface mount
Pin Count 48 pins 48 pins 48 pins 48 pins

Principaux différenciateurs

  • Identified SNI and JTAG functionality in the closest documented family option (vs DP83848VYB/NOPB)
  • Documented industrial temperature range for the IVVX ordering (vs DP83848IVV/NOPB)
  • Direct MII and RMII support for controller integration (vs DP83848VYB/NOPB)

Notes de conception

Follow the exact manufacturer application layout for the DP83848EVVX/NOPB, especially the relationship between digital MII or RMII traces, the PHY supply pins, and network-facing circuitry. Keep clock routing short and continuous, provide local supply decoupling at the appropriate pins, and avoid routing high-current or switching signals beneath sensitive media-side nets. Use the package pin description and land pattern for the exact ordering option rather than a generic 48-pin drawing.

Treat the Ethernet media interface as a controlled-impedance and return-path design problem. Match trace geometry to the PCB stack-up, maintain continuous ground references, and verify magnetics, termination, and cable-related component placement against the manufacturer reference design. Validate the design with link-up, packet-error, and conducted-emissions tests because generic Ethernet measurements may not reveal layout-specific coupling or impedance defects.

Do not select an alternative solely because the package name is 48-LQFP. Confirm the controller interface, supported data rates, management functions, configuration straps, reset requirements, clock source, temperature grade, and ordering-specific pin functions. Differences in a single configuration or management signal can prevent a board from operating even when the mechanical footprint matches.

Estimate power dissipation only after confirming the exact supply voltage and operating current for the selected ordering code. Calculate junction temperature from the package thermal characteristics, board copper area, airflow, and adjacent heat sources. If the calculation indicates limited thermal margin, improve copper spreading or reduce nearby power dissipation before increasing the operating temperature or adding enclosure-related temperature rise.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The available product listings do not provide verified compliance conclusions for the exact DP83848EVVX/NOPB ordering code. Check the manufacturer product page and ordering information before making a compliance claim.

Recherches associées

DP83848EVVX/NOPB datasheet DP83848EVVX/NOPB pinout DP83848EVVX/NOPB datasheet pdf DP83848EVVX/NOPB equivalent DP83848EVVX/NOPB replacement DP83848EVVX/NOPB cross reference DP83848EVVX/NOPB price DP83848EVVX/NOPB stock Texas Instruments DP83848EVVX/NOPB DP83848EVVX/NOPB LQFP-48 footprint DP83848EVVX/NOPB industrial Ethernet DP83848EVVX/NOPB vs DP83848IVVX/NOPB

Composants & termes associés

Texas Instruments DP83848EVVX/NOPB DP83848IVVX/NOPB DP83848VYB/NOPB DP83848IVV/NOPB DP83848I Ethernet PHY Ethernet physical layer Ethernet transceiver network interface IC semiconductor MII RMII 10BASE-T 100BASE-TX 10 Mbit/s 100 Mbit/s 48-LQFP LQFP package family surface-mount package SNI JTAG industrial Ethernet factory automation network interface adapter
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ