DP83849CVSX/NOPB - Dual-Port 10/100 Ethernet PHY | TI
Référence : DP83849CVSX/NOPB ✓ ActifDP83849CVSX/NOPB Présentation
An Ethernet PHY, or physical-layer transceiver, converts digital data into electrical signals that can travel over twisted-pair cabling and recovers those signals at the receiving endpoint. It operates within the physical layer of the Ethernet hierarchy, below the data-link and network layers. A dual-port PHY can therefore serve two independent 10/100 Ethernet links through one integrated circuit, reducing component count in switches, bridges, industrial controllers, and embedded network equipment.
The DP83849C family provides two Ethernet transceiver channels in a single package. Each channel supports 10 Mbps and 100 Mbps operation, while the common 3.3 V supply simplifies power-system design. Its 80-pin TQFP package exposes the connections required for media interfaces, clocking, control, power, and status signaling. The PFC package designation identifies the device's 12 mm by 12 mm gull-wing TQFP outline.
For network equipment, the key benefit is integration. Two PHY channels occupy one device rather than requiring two separate single-port PHYs. This can reduce board area, simplify shared power distribution, and centralize the manufacturer's digital control interface. The part is positioned for commercial-grade systems where a 0°C to 70°C ambient operating range is appropriate, including industrial controllers, embedded switches, print systems, and access equipment installed in controlled environments.
Ethernet infrastructure designs should preserve the recommended separation between analog transceiver paths and sensitive digital signals. Magnetics, an appropriate Ethernet jack, decoupling, and controlled return paths remain necessary for a complete physical-layer implementation. Placement of the PHY also affects signal integrity, thermal performance, and the ability to pass electromagnetic-emissions requirements.
The DP83849CVSX/NOPB is best suited to compact, two-port 10/100-Mbps products that value integration over gigabit performance. Use a gigabit PHY when the product must support 1000 Mbps traffic; the DP83849C architecture is intended for 10 Mbps and 100 Mbps links. Commercial-temperature qualification and the 80-pin footprint should be confirmed before integrating the part into an industrial or automotive enclosure.
This page combines manufacturer ordering information, exact package and temperature details, practical Ethernet design guidance, application fit, and a parameter-by-parameter replacement analysis. It also distinguishes verified drop-in candidates from order-code or delivery-format variations so engineers can make a PCB-compatible sourcing decision without relying on name similarity alone.
Alternatives de remplacement direct pour DP83849CVSX/NOPB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec DP83849CVSX/NOPB (même facteur de forme et même empreinte) — différant par Operating Temperature Range, Package Type, Temperature Grade.
DP83849IVSX/NOPB
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →DP83849CVSX/NOPB Spécifications
| Product Type | Dual-port 10/100-Mbps Ethernet PHY transceiver |
| Number of Transceiver Channels | 2 channels |
| Supported Ethernet Speeds | 10 Mbps and 100 Mbps |
| Tension d'alimentation | 3.3 V |
| Plage de température de fonctionnement | 0°C to 70°C |
| Temperature Grade | Commercial |
| Package Type | TQFP (PFC) |
| Package Dimensions | 12 mm x 12 mm |
| Nombre de broches | 80 pins |
| Lead Style | Gull wing |
| Type de montage | Surface mount |
| Order Code | DP83849CVSX/NOPB |
| Ethernet Media Type | Twisted-pair Ethernet |
| Number of Ports | 2 ports |
Guide de configuration des broches du DP83849CVSX/NOPB 12 mm x 12 mm
Configuration des broches du DP83849CVSX/NOPB (boîtier 12 mm x 12 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour DP83849CVSX/NOPB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
DP83849CVSX/NOPB convient pour 6 applications: Embedded Two-Port Ethernet Switch, Industrial Control Terminal, Networked Print System, Industrial Access and Control Unit, Industrial HMI Panel, Ethernet Communication Module.
Embedded Two-Port Ethernet Switch
The DP83849CVSX/NOPB fits a compact two-port Fast Ethernet switch because it combines two 10/100-Mbps PHY channels in one 80-pin TQFP package. Both ports operate from a 3.3 V supply, reducing the number of separate Ethernet PHY devices and centralizing power and control routing. The board still requires suitable magnetics, RJ45 connectors, clocking, reset control, and pass-through network equipment. With a commercial range of 0°C to 70°C, the device is appropriate for indoor controllers and network appliances maintained within controlled ambient conditions.
Recommandé
Industrial Control Terminal
The dual-port architecture of the DP83849CVSX/NOPB supports both a service-network connection and an equipment-to-network link in industrial control terminals. Each channel can operate at 10 Mbps or 100 Mbps, providing compatibility with older field equipment while retaining Fast Ethernet performance. The 3.3 V supply matches many embedded processor platforms, and the integrated 80-pin TQFP reduces external PHY count. Its 0°C-to-70°C rating suits controlled cabinets, but colder factory environments require an industrial-temperature version with a wider operating range.
Recommandé
Networked Print System
The DP83849CVSX/NOPB can provide two wired Fast Ethernet interfaces in an embedded print controller, allowing a local service connection and an upstream network connection to share one Ethernet PHY package. At 10 Mbps or 100 Mbps per port, the device suits print servers and control panels that do not require Gigabit throughput. The 3.3 V operating rail simplifies integration with embedded processors, while the commercial 0°C-to-70°C range is appropriate for indoor office or production-floor equipment housed in temperature-controlled enclosures.
Recommandé
Industrial Access and Control Unit
A dual-port access unit can use the DP83849CVSX/NOPB for an upstream Ethernet link and a downstream controller or local service link. Both 10/100-Mbps channels are useful where field equipment uses Fast Ethernet and bandwidth remains modest. The integrated 80-pin TQFP package simplifies board partitioning and reduces component count, while the 3.3 V rail fits conventional embedded systems. Designers must observe the commercial 0°C-to-70°C limit and use controlled enclosures or select an industrial-temperature variant for exposed installations.
Recommandé
Industrial HMI Panel
The DP83849CVSX/NOPB is suitable for a human-machine interface panel requiring wired connectivity to a supervisory controller and a local service port. Supporting 10 Mbps and 100 Mbps on two channels covers common plant Ethernet infrastructure without requiring a gigabit PHY. Its 3.3 V operation aligns with many embedded HMI platforms, and the two-channel TQFP device can reduce board-space requirements. The commercial temperature grade is suitable behind an indoor panel enclosure, but exposed panels should instead use an industrial-temperature alternative.
Recommandé
Ethernet Communication Module
The DP83849CVSX/NOPB can form the physical-layer core of a two-channel embedded Ethernet communication module. Each port supports 10/100-Mbps service, allowing a module to bridge equipment traffic while also presenting a management connection to the host processor. The 3.3 V supply and integrated dual-channel package simplify compact embedded designs. Compliance with electromagnetic-emissions requirements still depends on the complete implementation, including magnetics, connector layout, shielding, return paths, and the placement of decoupling components around the 80-pin TQFP.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DP83849CVSX/NOPB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DP83849IVSX/NOPB |
|---|---|---|
| Package | 80-pin TQFP (PFC), 12 mm x 12 mm | 80-pin TQFP (PFC), 12 mm x 12 mm |
| Brand | Texas Instruments | Texas Instruments |
| Transceiver Channels | 2 channels | 2 channels |
| Supported Speeds | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Supply Voltage | 3.3 V | 3.3 V |
| Temperature Grade | Commercial, 0°C to 70°C | Industrial, approximately -40°C to 85°C |
| Pin Count | 80 pins | 80 pins |
| Mounting Type | Surface mount | Surface mount |
| Gigabit Ethernet Support | No | No |
Principaux différenciateurs
- Two integrated Fast Ethernet channels in one device (vs DP83849IVSX/NOPB)
- Commercial-temperature ordering option (vs DP83849IVSX/NOPB)
- Common 80-pin TQFP board architecture (vs DP83849IVSX/NOPB)
Notes de conception
Follow the Texas Instruments PFC footprint and pin-description table exactly when defining the 80-pad land pattern. Place the PHY close to its Ethernet magnetics and connector, keep the media-side traces short, and provide an unobstructed ground return beneath the device and between adjacent signal groups. Do not derive the footprint from a generic 80-pin TQFP drawing because pad dimensions and exposed thermal requirements must match the PFC package.
Build the 3.3 V supply network around the manufacturer's recommended decoupling network and place the high-frequency bypass capacitors close to the corresponding PHY power pins. Keep switching-regulator and high-current return paths away from the clock and media-related circuitry. Validate startup, reset sequencing, and supply stability in the assembled board because network interfaces can exhibit intermittent link or clocking problems when supply and return paths are noisy.
Use the manufacturer's reference layout for the clock, management, and Ethernet media connections, and maintain continuous ground references beneath high-speed routes. Avoid adding long test pads or stubs to sensitive nets, and observe the required isolation spacing between the two channels. If emissions or link-margin testing fails, inspect connector return pins, magnetics placement, cable shield termination, and ground-plane continuity before changing PHY settings.
Provide adequate copper around the 80-pin TQFP and avoid enclosing the device in a sealed enclosure without thermal analysis. The commercial ordering code is intended for a 0°C-to-70°C ambient range, so internal temperature rise at the PHY must remain inside that budget. Estimate worst-case dissipation from actual rail and I/O loading, then verify the assembled enclosure at the highest expected ambient temperature.
Do not treat the X and S order codes as electrically different PHY designs when evaluating PCB compatibility, and do not assume that a family member is a drop-in replacement solely because it uses an 80-pin TQFP package. Verify every reset, clock, management, power, and media signal against the manufacturer pin table. For the industrial alternative, confirm the complete temperature rating and ordering suffix before releasing the production BOM.
Informations de conformité
The ordering information identifies a commercial-temperature product, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is stated. Automotive qualification is not applicable to the identified commercial-temperature ordering code.