Texas Instruments

DP83849CVSX/NOPB - Dual-Port 10/100 Ethernet PHY | TI

MPN: DP83849CVSX/NOPB ✓ Active
3.3 V Vdss TQFP (PFC) Package 10 Mbps and 100 Mbps Speed
MOQ: 1 |

DP83849CVSX/NOPB Overview

The Texas Instruments DP83849CVSX/NOPB is a dual-port 10/100-Mbps Ethernet PHY transceiver with two integrated transceiver channels, 3.3 V operation, and an 80-pin TQFP (PFC) package measuring 12 mm by 12 mm. Designed for commercial-temperature equipment, the device supports an operating temperature range of 0°C to 70°C.

An Ethernet PHY, or physical-layer transceiver, converts digital data into electrical signals that can travel over twisted-pair cabling and recovers those signals at the receiving endpoint. It operates within the physical layer of the Ethernet hierarchy, below the data-link and network layers. A dual-port PHY can therefore serve two independent 10/100 Ethernet links through one integrated circuit, reducing component count in switches, bridges, industrial controllers, and embedded network equipment.

The DP83849C family provides two Ethernet transceiver channels in a single package. Each channel supports 10 Mbps and 100 Mbps operation, while the common 3.3 V supply simplifies power-system design. Its 80-pin TQFP package exposes the connections required for media interfaces, clocking, control, power, and status signaling. The PFC package designation identifies the device's 12 mm by 12 mm gull-wing TQFP outline.

For network equipment, the key benefit is integration. Two PHY channels occupy one device rather than requiring two separate single-port PHYs. This can reduce board area, simplify shared power distribution, and centralize the manufacturer's digital control interface. The part is positioned for commercial-grade systems where a 0°C to 70°C ambient operating range is appropriate, including industrial controllers, embedded switches, print systems, and access equipment installed in controlled environments.

Ethernet infrastructure designs should preserve the recommended separation between analog transceiver paths and sensitive digital signals. Magnetics, an appropriate Ethernet jack, decoupling, and controlled return paths remain necessary for a complete physical-layer implementation. Placement of the PHY also affects signal integrity, thermal performance, and the ability to pass electromagnetic-emissions requirements.

The DP83849CVSX/NOPB is best suited to compact, two-port 10/100-Mbps products that value integration over gigabit performance. Use a gigabit PHY when the product must support 1000 Mbps traffic; the DP83849C architecture is intended for 10 Mbps and 100 Mbps links. Commercial-temperature qualification and the 80-pin footprint should be confirmed before integrating the part into an industrial or automotive enclosure.

This page combines manufacturer ordering information, exact package and temperature details, practical Ethernet design guidance, application fit, and a parameter-by-parameter replacement analysis. It also distinguishes verified drop-in candidates from order-code or delivery-format variations so engineers can make a PCB-compatible sourcing decision without relying on name similarity alone.

Drop-in alternatives for DP83849CVSX/NOPB — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with DP83849CVSX/NOPB (same form factor and footprint) — differing in Operating Temperature Range, Package Type, Temperature Grade.

Texas Instruments
Operating Temperature Range: -40 °C to +85 °C
Package Type: TQFP
Temperature Grade: Industrial

DP83849IVSX/NOPB

✅ Drop-In
Texas Instruments
📦 80-pin TQFP (PFC)
Dual-port 10/100-Mbps Ethernet physical-layer transceiver · 2 · 10 Mbps and 100 Mbps · 10/100 Ethernet · Flexible port switching · 3.3 V · -40 °C to +85 °C · Industrial

Contact for price

View Datasheet →

DP83849CVSX/NOPB Specifications

Product Type Dual-port 10/100-Mbps Ethernet PHY transceiver
Number of Transceiver Channels 2 channels
Supported Ethernet Speeds 10 Mbps and 100 Mbps
Supply Voltage 3.3 V
Operating Temperature Range 0°C to 70°C
Temperature Grade Commercial
Package Type TQFP (PFC)
Package Dimensions 12 mm x 12 mm
Pin Count 80 pins
Lead Style Gull wing
Mounting Type Surface mount
Order Code DP83849CVSX/NOPB
Ethernet Media Type Twisted-pair Ethernet
Number of Ports 2 ports

DP83849CVSX/NOPB 12 mm x 12 mm Pin Configuration Guide

Pin configuration for DP83849CVSX/NOPB (12 mm x 12 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

12 mm x 12 mm package pinout diagram for DP83849CVSX/NOPB

No detailed pinout data available for DP83849CVSX/NOPB.

Refer to the datasheet for full pin configuration.

Typical Applications

DP83849CVSX/NOPB is suitable for 6 applications: Embedded Two-Port Ethernet Switch, Industrial Control Terminal, Networked Print System, Industrial Access and Control Unit, Industrial HMI Panel, Ethernet Communication Module.

🌐

Embedded Two-Port Ethernet Switch

The DP83849CVSX/NOPB fits a compact two-port Fast Ethernet switch because it combines two 10/100-Mbps PHY channels in one 80-pin TQFP package. Both ports operate from a 3.3 V supply, reducing the number of separate Ethernet PHY devices and centralizing power and control routing. The board still requires suitable magnetics, RJ45 connectors, clocking, reset control, and pass-through network equipment. With a commercial range of 0°C to 70°C, the device is appropriate for indoor controllers and network appliances maintained within controlled ambient conditions.

🏭

Industrial Control Terminal

The dual-port architecture of the DP83849CVSX/NOPB supports both a service-network connection and an equipment-to-network link in industrial control terminals. Each channel can operate at 10 Mbps or 100 Mbps, providing compatibility with older field equipment while retaining Fast Ethernet performance. The 3.3 V supply matches many embedded processor platforms, and the integrated 80-pin TQFP reduces external PHY count. Its 0°C-to-70°C rating suits controlled cabinets, but colder factory environments require an industrial-temperature version with a wider operating range.

🖥️

Networked Print System

The DP83849CVSX/NOPB can provide two wired Fast Ethernet interfaces in an embedded print controller, allowing a local service connection and an upstream network connection to share one Ethernet PHY package. At 10 Mbps or 100 Mbps per port, the device suits print servers and control panels that do not require Gigabit throughput. The 3.3 V operating rail simplifies integration with embedded processors, while the commercial 0°C-to-70°C range is appropriate for indoor office or production-floor equipment housed in temperature-controlled enclosures.

🧩

Industrial Access and Control Unit

A dual-port access unit can use the DP83849CVSX/NOPB for an upstream Ethernet link and a downstream controller or local service link. Both 10/100-Mbps channels are useful where field equipment uses Fast Ethernet and bandwidth remains modest. The integrated 80-pin TQFP package simplifies board partitioning and reduces component count, while the 3.3 V rail fits conventional embedded systems. Designers must observe the commercial 0°C-to-70°C limit and use controlled enclosures or select an industrial-temperature variant for exposed installations.

🖥️

Industrial HMI Panel

The DP83849CVSX/NOPB is suitable for a human-machine interface panel requiring wired connectivity to a supervisory controller and a local service port. Supporting 10 Mbps and 100 Mbps on two channels covers common plant Ethernet infrastructure without requiring a gigabit PHY. Its 3.3 V operation aligns with many embedded HMI platforms, and the two-channel TQFP device can reduce board-space requirements. The commercial temperature grade is suitable behind an indoor panel enclosure, but exposed panels should instead use an industrial-temperature alternative.

🔧

Ethernet Communication Module

The DP83849CVSX/NOPB can form the physical-layer core of a two-channel embedded Ethernet communication module. Each port supports 10/100-Mbps service, allowing a module to bridge equipment traffic while also presenting a management connection to the host processor. The 3.3 V supply and integrated dual-channel package simplify compact embedded designs. Compliance with electromagnetic-emissions requirements still depends on the complete implementation, including magnetics, connector layout, shielding, return paths, and the placement of decoupling components around the 80-pin TQFP.

What is DP83849CVSX/NOPB?
The DP83849CVSX/NOPB is a Texas Instruments dual-port 10/100-Mbps Ethernet PHY transceiver packaged in an 80-pin TQFP. According to the manufacturer product page, it contains two Ethernet transceiver channels, operates from a 3.3 V supply, and is intended for commercial-temperature equipment. It is suitable for embedded switches, industrial controllers, print systems, access equipment, and other products requiring two 10/100 Ethernet physical-layer interfaces.
How many Ethernet ports does DP83849CVSX/NOPB support?
The DP83849CVSX/NOPB supports two independent 10/100-Mbps Ethernet transceiver channels in one package. The 2/2 classification shown by Texas Instruments distinguishes its two-port architecture from single-port Ethernet PHYs. This integration can simplify a two-port switch or network interface by reducing the number of PHY packages, although magnetics, connectors, clocks, and appropriate bypass capacitors remain external circuit requirements.
What Ethernet speeds are supported by DP83849CVSX/NOPB?
The DP83849CVSX/NOPB supports 10 Mbps and 100 Mbps Ethernet operation on both transceiver channels. It does not provide 1000-Mbps operation. According to the Texas Instruments DP83849C product description, the device is a dual-port 10/100-Mbps PHY, so it is appropriate for legacy Fast Ethernet and 10BASE-T links but not for designs requiring Gigabit Ethernet throughput.
What package does DP83849CVSX/NOPB use?
The DP83849CVSX/NOPB uses an 80-pin TQFP package identified by Texas Instruments as PFC, with package dimensions of 12 mm by 12 mm and gull-wing leads. The orderable part is supplied in a surface-mount tape-and-reel format. Board layouts should follow the manufacturer's PFC land pattern and pin table rather than relying on the generic TQFP name alone.
What is the operating temperature range of DP83849CVSX/NOPB?
The DP83849CVSX/NOPB has a commercial operating-temperature range of 0°C to 70°C. The manufacturer identifies this orderable MPN as the commercial-temperature version of the DP83849C family. If the enclosure can fall below 0°C or operate above 70°C, select a temperature-qualified industrial option and verify its complete electrical and environmental ratings before PCB release.
Where can I download the DP83849CVSX/NOPB datasheet?
The official DP83849C product page at Texas Instruments provides the manufacturer datasheet, part-ordering information, and supporting technical documentation. The product-specific ordering entry identifies DP83849CVSX/NOPB as the commercial-temperature, dual-port 10/100-Mbps device in an 80-pin TQFP (PFC) package. Use the pin description, recommended application circuit, and PCB layout sections from the manufacturer datasheet when finalizing a design.
Where can I find the DP83849CVSX/NOPB pinout?
The DP83849CVSX/NOPB pinout is contained in the pin-description table of the official DP83849C manufacturer datasheet. The package has 80 pins, so the complete assignment must be checked against the PFC footprint rather than inferred from function names. Pay particular attention to supply, ground, clock, reset, management-interface, and media signals when assigning nets.
DP83849CVSX/NOPB vs DP83849IVSX/NOPB: which is better?
Choose the DP83849CVSX/NOPB for commercial-temperature applications and the DP83849IVSX/NOPB when the wider industrial-temperature rating is required. Both use the same 80-pin TQFP family and provide dual-port 10/100-Mbps Ethernet PHY functionality. The defining selection criterion is the ambient temperature range: the commercial part is rated from 0°C to 70°C, while the industrial option supports colder and hotter operating environments.
What is the difference between DP83849CVSX/NOPB and DP83849CVS/NOPB?
The primary documented difference between DP83849CVSX/NOPB and DP83849CVS/NOPB is the supplied mounting format: the X ordering denotes tape-and-reel delivery, while the S ordering denotes tray delivery. Both identify the same commercial, dual-port 10/100 Ethernet PHY configuration in an 80-pin TQFP package. They should therefore be treated as order-code variations rather than functionally different replacement choices.
When should I choose DP83849CVSX/NOPB over another Ethernet PHY?
Choose the DP83849CVSX/NOPB when the design needs two 10/100-Mbps ports, a 3.3 V supply, an 80-pin TQFP footprint, and a commercial 0°C-to-70°C operating range. Select a single-port PHY when only one link is required, or select an industrial-grade part when the enclosure temperature can fall outside the commercial range. It is not suitable when 1000-Mbps Ethernet is mandatory.
Is DP83849CVSX/NOPB suitable for an industrial controller?
The DP83849CVSX/NOPB is suitable for an industrial controller installed in a controlled enclosure whose ambient temperature remains between 0°C and 70°C. Its commercial grade, dual 10/100-Mbps channels, and 3.3 V operation suit embedded network equipment. For outdoor equipment, cold warehouses, or factories with temperatures outside that range, use an industrial-temperature option and complete the required environmental qualification.
What can replace DP83849CVSX/NOPB?
The closest same-family drop-in candidate identified for the DP83849CVSX/NOPB is the DP83849IVSX/NOPB, which uses the same 80-pin TQFP layout and dual-port 10/100-Mbps architecture but targets industrial temperatures. Delivery-code alternatives such as DP83849CVS/NOPB share the electrical device but differ in tray packaging. A PCB swap also requires verification of reset, clock, management-interface, and media-signal compatibility.
Is there a Microchip equivalent for DP83849CVSX/NOPB?
No verified pin-to-pin Microchip equivalent is identified for the DP83849CVSX/NOPB. The available cross-reference results confirm the original Texas Instruments ordering code and the same-family industrial-temperature DP83849IVSX/NOPB, but do not document a Microchip 80-pin, dual-port 10/100-Mbps device with matching pin assignments. Treat functional Ethernet PHYs as redesign candidates unless the manufacturer explicitly documents footprint and pin compatibility.
Where can I buy DP83849CVSX/NOPB and check its lead time?
Use the Request a Quote form on this page to request DP83849CVSX/NOPB availability, current lead time, and order quantity. The manufacturer identifies the part as an active commercial-temperature ordering option in an 80-pin TQFP package. Quote requests should state the required quantity, tape-and-reel format, destination, and target schedule so procurement can confirm the appropriate supply arrangement.
What are the key specifications of DP83849CVSX/NOPB that engineers should know?
The key specifications are two 10/100-Mbps Ethernet channels, 3.3 V operation, a commercial 0°C-to-70°C temperature range, and an 80-pin 12 mm-by-12 mm TQFP package. According to the Texas Instruments product page, the device is classified as a dual-port 10/100-Mbps Ethernet PHY transceiver. These parameters define its use in two-port Fast Ethernet equipment and its need for manufacturer-recommended magnetics and layout practices.

Engineering reference data for DP83849CVSX/NOPB — comparison, design guidance, and compliance information.

Selection Guide

Choose DP83849CVSX/NOPB for an indoor dual-port 10/100-Mbps product whose enclosure remains between 0°C and 70°C. Its two integrated PHY channels, 3.3 V supply, and 80-pin TQFP package are appropriate for embedded switches, industrial terminals, HMIs, and communication modules. Choose DP83849IVSX/NOPB when the same electrical and package architecture must operate in a colder or hotter industrial environment; it preserves the two-channel 10/100-Mbps configuration while extending the temperature range. DP83849CVS/NOPB is a tray-format ordering option for the commercial device rather than a different functional design, and it does not solve an environmental-temperature requirement. Do not choose this family for Gigabit Ethernet because both channels are limited to 100 Mbps. Before substituting any option, confirm the complete PFC pin assignments, clocking requirements, management interface, reset behavior, media compatibility, and package dimensions against the manufacturer datasheet.

Comparison with Alternatives

Parameter This Product DP83849IVSX/NOPB
Package 80-pin TQFP (PFC), 12 mm x 12 mm 80-pin TQFP (PFC), 12 mm x 12 mm
Brand Texas Instruments Texas Instruments
Transceiver Channels 2 channels 2 channels
Supported Speeds 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Supply Voltage 3.3 V 3.3 V
Temperature Grade Commercial, 0°C to 70°C Industrial, approximately -40°C to 85°C
Pin Count 80 pins 80 pins
Mounting Type Surface mount Surface mount
Gigabit Ethernet Support No No

Key Differentiators

  • Two integrated Fast Ethernet channels in one device (vs DP83849IVSX/NOPB)
  • Commercial-temperature ordering option (vs DP83849IVSX/NOPB)
  • Common 80-pin TQFP board architecture (vs DP83849IVSX/NOPB)

Design Notes

Follow the Texas Instruments PFC footprint and pin-description table exactly when defining the 80-pad land pattern. Place the PHY close to its Ethernet magnetics and connector, keep the media-side traces short, and provide an unobstructed ground return beneath the device and between adjacent signal groups. Do not derive the footprint from a generic 80-pin TQFP drawing because pad dimensions and exposed thermal requirements must match the PFC package.

Build the 3.3 V supply network around the manufacturer's recommended decoupling network and place the high-frequency bypass capacitors close to the corresponding PHY power pins. Keep switching-regulator and high-current return paths away from the clock and media-related circuitry. Validate startup, reset sequencing, and supply stability in the assembled board because network interfaces can exhibit intermittent link or clocking problems when supply and return paths are noisy.

Use the manufacturer's reference layout for the clock, management, and Ethernet media connections, and maintain continuous ground references beneath high-speed routes. Avoid adding long test pads or stubs to sensitive nets, and observe the required isolation spacing between the two channels. If emissions or link-margin testing fails, inspect connector return pins, magnetics placement, cable shield termination, and ground-plane continuity before changing PHY settings.

Provide adequate copper around the 80-pin TQFP and avoid enclosing the device in a sealed enclosure without thermal analysis. The commercial ordering code is intended for a 0°C-to-70°C ambient range, so internal temperature rise at the PHY must remain inside that budget. Estimate worst-case dissipation from actual rail and I/O loading, then verify the assembled enclosure at the highest expected ambient temperature.

Do not treat the X and S order codes as electrically different PHY designs when evaluating PCB compatibility, and do not assume that a family member is a drop-in replacement solely because it uses an 80-pin TQFP package. Verify every reset, clock, management, power, and media signal against the manufacturer pin table. For the industrial alternative, confirm the complete temperature rating and ordering suffix before releasing the production BOM.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The ordering information identifies a commercial-temperature product, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is stated. Automotive qualification is not applicable to the identified commercial-temperature ordering code.

Data verified on: 2026-11-09 — data verified and curated by XAIPART's component engineering team

Related Searches

DP83849CVSX/NOPB datasheet DP83849CVSX/NOPB pinout DP83849CVSX/NOPB specifications DP83849CVSX/NOPB package DP83849CVSX/NOPB equivalent DP83849CVSX/NOPB replacement DP83849CVSX/NOPB vs DP83849IVSX/NOPB DP83849CVSX/NOPB price DP83849CVSX/NOPB stock Texas Instruments DP83849CVSX/NOPB DP83849CVSX/NOPB footprint DP83849C dual port Ethernet PHY

Related Components & Terms

Texas Instruments DP83849CVSX/NOPB DP83849C DP83849IVSX/NOPB DP83849CVS/NOPB Ethernet PHY physical-layer transceiver dual-port Ethernet transceiver 10BASE-T 100BASE-TX Fast Ethernet 10 Mbps 100 Mbps 3.3 V supply 80-pin TQFP PFC package QFN family surface-mount package gull-wing lead commercial temperature grade industrial temperature grade Ethernet magnetics RJ45 connector embedded switch signal integrity
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details