DSPIC30F4012T-30I/SO - 16-bit 30MIPS DSC, 48KB Flash | Microchip
Référence : DSPIC30F4012T-30I/SO ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.65 | $2 325,00 |
| 1 000 | $4.1 | $4 100,00 |
DSPIC30F4012T-30I/SO Présentation
What is a Digital Signal Controller? A DSC is a hybrid architecture that fuses a modified Harvard RISC CPU core with dedicated DSP execution units, enabling single-cycle MAC (multiply-accumulate) operations. DSCs sit hierarchically between general-purpose microcontrollers and full DSP processors, offering deterministic real-time control with high-throughput signal processing in a single chip - ideal for closed-loop motor control, power conversion, and sensor-fusion applications.
Key features include a 16-bit data path with single-cycle MAC, 2KB of RAM, 1KB of EEPROM emulation, four 16-bit timers, six PWM channels with duty-cycle control, a 12-bit ADC with up to 200 ksps conversion rate, and industrial-grade peripherals such as I2C, SPI, UART, and CAN. The wide 2.5V to 5.5V operating range allows direct interface to 5V systems. An integrated motor-control PWM module supports complementary outputs with programmable dead-time insertion.
Architecturally, the DSPIC30F4012T uses a 24-bit instruction word with separate 16-bit data buses for X and Y memory, allowing dual-operand fetches in a single cycle. This dual-bus design is critical for MAC-intensive DSP loops such as FIR filters, PID control, and Park/Clarke transforms used in field-oriented motor control.
Typical applications include BLDC and PMSM motor drives, sensorless fan/pump controllers, uninterruptible power supplies (UPS), digital power converters, and industrial sensor signal conditioning. The dsPIC30F family is widely deployed in appliance motor-control modules, HVAC blowers, and small-format power tools.
Design consideration: when migrating from 5V to 3.3V systems, verify all peripheral voltage ratings remain within range, and budget Flash endurance (typically 10K erase/write cycles) against firmware update frequency.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the DSPIC30F4012T-30I/SO not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour DSPIC30F4012T-30I/SO — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec DSPIC30F4012T-30I/SO (même facteur de forme et même empreinte) — différant par Package, ADC, Core Architecture, Maximum CPU Speed, PWM Channels.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
DSPIC30F4012-30I/SO
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DSPIC30F4012-20I/SO
✅ Remplacement direct✓ En stock
$5.1 / unité
Voir la fiche technique →DSPIC30F4012T-30I/SO Valeurs maximales et caractéristiques électriques
| Core Architecture | dsPIC30F (16-bit modified Harvard RISC + DSP) |
| Instruction Set | 16-bit data path, 24-bit instruction word |
| Maximum CPU Speed | 30 MIPS (Million Instructions Per Second) |
| Program Memory (Flash) | 48 KB (16K x 24 words) |
| RAM | 2 KB |
| Data EEPROM | 1 KB |
| Operating Voltage Range | 2.5 V to 5.5 V |
| ADC | 12-bit, up to 200 ksps |
| PWM Channels | 6 channels with complementary outputs and dead-time |
| Timers | Five 16-bit timers |
| Communication Interfaces | I2C, SPI, UART, CAN |
| I/O Pins | 20 general-purpose I/O |
| Plage de température de fonctionnement | -40C to +85C (Industrial) |
| Boîtier | 28-pin SOIC (SO), wide-body |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de DSPIC30F4012T-30I/SO
| Broche 1 | MCLR — Master Clear (reset) input, active-low |
| Broche 2 | RA0/AN0 — I/O / ADC analog input 0 |
| Broche 3 | RA1/AN1 — I/O / ADC analog input 1 |
| Broche 4 | RA2/AN2 — I/O / ADC analog input 2 |
| Broche 5 | RA3/AN3 — I/O / ADC analog input 3 |
| Broche 6 | RA4/AN4 — I/O / ADC analog input 4 |
| Broche 7 | VDD — Positive supply (2.5V to 5.5V) |
| Broche 8 | VSS — Ground reference |
| Broche 9 | OSC1 — Oscillator crystal input |
| Broche 10 | OSC2 — Oscillator crystal output |
| Broche 11 | RC13/INT0 — I/O / external interrupt 0 |
| Broche 12 | RB0/AN8 — I/O / ADC analog input 8 |
| Broche 13 | RB1/AN9 — I/O / ADC analog input 9 |
| Broche 14 | RB2/CANTX — I/O / CAN transmit |
| Broche 15 | RB3/CANRX — I/O / CAN receive |
| Broche 16 | PWM1H — PWM channel 1 high-side output |
| Broche 17 | PWM1L — PWM channel 1 low-side output |
| Broche 18 | PWM2H — PWM channel 2 high-side output |
| Broche 19 | PWM2L — PWM channel 2 low-side output |
| Broche 20 | PWM3H — PWM channel 3 high-side output |
| Broche 21 | VDD — Positive supply (second pin) |
| Broche 22 | VSS — Ground (second pin) |
| Broche 23 | RC15/U1TX — I/O / UART1 transmit |
| Broche 24 | RC14/U1RX — I/O / UART1 receive |
| Broche 25 | VREF- — ADC negative reference |
| Broche 26 | VREF+ — ADC positive reference |
| Broche 27 | AVDD — Analog supply (2.5V to 5.5V) |
| Broche 28 | AVSS — Analog ground |
Applications typiques
DSPIC30F4012T-30I/SO convient pour 6 applications: BLDC Motor Control, HVAC Fan and Pump Drives, Uninterruptible Power Supplies (UPS), Digital Power Conversion, Sensor Signal Conditioning, Industrial Sensorless Fan Control.
BLDC Motor Control
The DSPIC30F4012T-30I/SO is purpose-built for brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) control in industrial and appliance applications. Its integrated 6-channel PWM with complementary outputs and programmable dead-time generation directly drives three-phase MOSFET or IGBT bridges without external gate-driver logic for low-power systems. The 30 MIPS DSP engine executes Park/Clarke and PID loops at switching frequencies up to 20 kHz, while the 12-bit 200 ksps ADC samples phase currents with adequate resolution for sensorless field-oriented control. With 48 KB Flash and 5 V operation, the DSPIC30F4012T-30I/SO drops into 5 V industrial motor-drive boards replacing discrete DSP+MCU solutions.
Recommandé
HVAC Fan and Pump Drives
In variable-frequency HVAC blowers, fans, and centrifugal pumps, the DSPIC30F4012T-30I/SO provides the closed-loop PID control and sinusoidal commutation needed for energy-efficient speed regulation. The wide 2.5 V to 5.5 V supply tolerance operates directly from 5 V logic rails inside appliance main boards, and the -40C to +85C industrial temperature range handles garage, basement, and outdoor HVAC environments. With 30 MIPS available and on-chip CAN connectivity, the DSC simultaneously drives the motor and links to building-management networks, eliminating a separate communication MCU. Compared to a discrete MCU+ASIC solution, the DSPIC30F4012T-30I/SO reduces BOM cost and PCB area in compact HVAC enclosures.
Recommandé
Uninterruptible Power Supplies (UPS)
Online and line-interactive UPS systems leverage the DSPIC30F4012T-30I/SO for inverter control, DC-DC bus regulation, and battery-charge management. The DSP core runs multi-loop control - output voltage RMS, current limiting, and battery-state monitoring - within a single 30 MIPS device, while the on-chip 12-bit ADC measures inverter currents at the 200 ksps rate required for current-mode control. The 5 V tolerant digital I/O interfaces directly to legacy analog front-ends and opto-isolated gate drivers common in UPS hardware. The 48 KB Flash supports full-state control firmware including grid-sync PLL and soft-start sequences without external memory, lowering total BOM cost.
Recommandé
Digital Power Conversion
Switch-mode power supplies (SMPS) and digital power-factor-correction (PFC) stages use the DSPIC30F4012T-30I/SO to implement current-mode control and adaptive dead-time compensation. The 30 MIPS DSP engine computes the control law at the 100 kHz switching frequency typical of telecom and server PSU designs, with sufficient headroom for adaptive digital filtering. The 6-channel PWM provides primary-side switching and synchronous-rectifier control with nanosecond-resolution dead-time insertion, while the on-chip ADC samples the inductor current and output voltage with 12-bit resolution. The 5 V I/O supports direct connection to legacy analog comparators used for cycle-by-cycle current limiting.
Recommandé
Sensor Signal Conditioning
Industrial sensor transmitters - pressure, flow, level, and temperature - use the DSPIC30F4012T-30I/SO for on-sensor digital filtering, linearization, and 4-20 mA loop communication. The DSP core implements real-time FIR/IIR filters that remove 50/60 Hz line noise from low-level sensor signals, while the 12-bit ADC provides conversion of bridge and RTD outputs with 200 ksps throughput. The wide 2.5 V to 5.5 V operating range and low standby current suit loop-powered 4-20 mA transmitters drawing <3.5 mA from the loop. The 28-SOIC package enables compact sensor-head PCB layouts with a single-chip DSP+comm solution.
Recommandé
Industrial Sensorless Fan Control
Sensorless BLDC fan controllers in server racks, telecom equipment, and white goods use the DSPIC30F4012T-30I/SO to implement back-EMF zero-cross detection and closed-loop speed regulation without Hall-effect sensors. The integrated ADC samples the undriven phase voltage through a resistor divider, and the DSP computes the commutation timing from the zero-cross events within a single switching cycle. With 30 MIPS available, the firmware can run field-weakening algorithms for high-speed fans above 10,000 RPM. The 28-SOIC package and 5 V tolerance suit legacy fan-driver boards designed for PIC18 + IR2110 gate-driver architectures.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DSPIC30F4012T-30I/SO — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DSPIC30F4012-30I/SO | DSPIC30F4012-20I/SO |
|---|---|---|---|
| Package | SOIC-28 (SO) wide-body | SOIC-28 (SO) - same | SOIC-28 (SO) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | dsPIC30F 16-bit DSC | dsPIC30F 16-bit DSC | dsPIC30F 16-bit DSC |
| MIPS | 30 MIPS | 30 MIPS | 20 MIPS |
| Program Flash | 48 KB | 48 KB | 48 KB |
| RAM | 2 KB | 2 KB | 2 KB |
| Operating Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Packaging Format | Tape & Reel (T suffix) | Tube (no T suffix) | Tube (no T suffix) |
| PWM Channels | 6 (3 complementary pairs) | 6 (3 complementary pairs) | 6 (3 complementary pairs) |
| CAN Interface | Yes (1 channel) | Yes (1 channel) | Yes (1 channel) |
Principaux différenciateurs
- 5V-tolerant operation with integrated CAN interface (vs DSPIC33FJ32MC102T-E/SO)
- Higher instruction throughput than 20 MIPS variant (vs DSPIC30F4012-20I/SO)
- Reel-pack convenience for production assembly (vs DSPIC30F4012-30I/SO (tube))
Notes de conception
Estimated: at 30 MIPS CPU load and 5 V supply, the DSPIC30F4012T-30I/SO dissipates approximately 60 mW internal power. With the 28-SOIC package's typical theta_JA of 70 C/W, the junction temperature rises only ~4C above ambient, making thermal management trivial for typical motor-control applications. No external heatsinking is required.
Place a 0.1 uF decoupling capacitor within 5 mm of each VDD pin (pins 7 and 21) and a bulk 10 uF tantalum or ceramic cap on the supply rail. Separate analog AVDD (pin 27) from digital VDD with a ferrite bead or 10 ohm resistor to reduce switching-noise coupling into ADC readings. Keep analog input traces short and guarded with a ground ring to minimize 12-bit ADC channel crosstalk.
Route the PWM output traces (PWM1H/L through PWM3H/L, pins 16-20) away from sensitive analog inputs and keep them short (<25 mm) to limit radiated EMI. Place a small RC snubber (10 ohm + 1 nF) on each PWM output if driving long motor cables to reduce dv/dt ringing. The high-current motor ground return should NOT share the analog ground trace back to the MCU; use a star-ground topology at the bulk decoupling capacitor.
Estimated: do not exceed 5.5 V on any digital I/O pin; the 5 V tolerance applies to logic-level inputs but absolute maximum ratings include negative undershoot limits of -0.3 V. When using the internal RC oscillator, verify that the CAN baud-rate timing remains within CAN 2.0B specifications (typically requiring a crystal for reliable bus arbitration). The MCLR reset pin MUST be tied to VDD through a 10 kohm pull-up; leaving it floating causes intermittent resets.
Informations de conformité
RoHS and lead-free compliant per Microchip product page. Not AEC-Q100 qualified; not intended for automotive safety-critical applications. Industrial-grade -40C to +85C only.
