DSPIC33CK32MP205T-I/PT - 100MHz 16-Bit DSC 48-TQFP | Microchip
Référence : DSPIC33CK32MP205T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.05 | $2,05 |
| 10 | $1.95 | $19,50 |
| 100 | $1.78 | $178,00 |
| 500 | $1.62 | $810,00 |
| 1 000 | $1.48 | $1 480,00 |
DSPIC33CK32MP205T-I/PT Présentation
A digital signal controller combines the computational throughput of a DSP (single-cycle MAC, DSP instruction set, hardware divide) with the peripheral integration and determinism of a microcontroller. DSCs sit between general-purpose MCUs and dedicated DSPs in the system hierarchy, making them the standard choice for closed-loop power conversion and motor control where both fast math and rich peripherals are required in one chip.
Key features include the 100 MHz dsPIC DSC core with DSP and fixed-point math acceleration, a High-Resolution PWM (HRPWM) engine suited to switching converters, three integrated operational amplifiers and three analog comparators that offload external analog circuitry, a Peripheral Trigger Generator (PTG) for hardware-automated sequencing, and CAN Flexible Data (CAN FD) support for automotive and industrial networking. The device is also positioned by Microchip as a Functional Safety (FuSa) capable part.
Technically, the dsPIC33CK architecture uses a modified Harvard 16-bit core with zero-overhead loops, hardware DSP multiply-accumulate, and interrupt latency low enough for high-bandwidth current-loop control. The HRPWM allows fine duty-cycle and phase resolution for digital power supplies, while the on-chip op-amps can be used as current-sense amplifiers feeding the comparators and PWM fault inputs directly.
Typical applications include digital power supplies (LLC, buck, PFC), brushless DC and PMSM motor control for industrial drives, and advanced sensing with CAN FD connectivity in automotive and factory automation nodes.
A key design consideration is the 3.0V to 3.6V supply requirement: plan a regulated 3.3V rail and decouple VDD/AVDD pins individually. Also note the T suffix denotes tape-and-reel packaging for automated assembly.
This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.
Alternatives de remplacement direct pour DSPIC33CK32MP205T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec DSPIC33CK32MP205T-I/PT (même facteur de forme et même empreinte) — différant par Package, Core, PWM, Operating Temperature, Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
DSPIC33CK32MP205T-E/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DSPIC33CK32MC105-E/PT
✅ Remplacement direct✓ En stock
$1.55 / unité
Voir la fiche technique →DSPIC33CK64MP205-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
DSPIC33CK128MP205-E/PT
✅ Remplacement direct✓ En stock
$3.61 / unité
Voir la fiche technique →DSPIC33CK256MP205-I/PT
✅ Remplacement direct✓ En stock
$3.55 / unité
Voir la fiche technique →DSPIC33CK32MP205T-I/PT Valeurs maximales et caractéristiques électriques
| Core | dsPIC33CK 16-bit DSC |
| Max Clock Frequency | 100 MHz |
| Program Memory Size | 32 KB (32K x 8) Flash |
| RAM Size | 8 KB |
| Boîtier | 48-TQFP (7x7 mm) |
| Tension d'alimentation | 3.0 V to 3.6 V |
| Température de fonctionnement | -40C to +85C (I grade) |
| Integrated Op-Amps | 3 |
| Comparators | 3 |
| PWM | High-Resolution PWM (HRPWM) |
| CAN Interface | CAN Flexible Data (CAN FD) |
| Peripherals Special Feature | Peripheral Trigger Generator (PTG) |
| Functional Safety Support | Yes (FuSa) |
| Type de montage | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| Statut RoHS | RoHS compliant (per JLCPCB listing) |
Configuration des broches de DSPIC33CK32MP205T-I/PT
| Broche 1 | MCLR — Master clear reset (active low) / programming voltage input |
| Broche 2 | AN0/RA0 — Analog input 0 / digital I/O |
| Broche 3 | AN1/RA1 — Analog input 1 / digital I/O |
| Broche 4 | PGD2/AN2 — ICSP data 2 / analog input 2 |
| Broche 5 | PGC2/AN3 — ICSP clock 2 / analog input 3 |
| Broche 6 | AN4 — Analog input 4 / digital I/O |
| Broche 7 | VSS — Digital ground |
| Broche 8 | VDD — Digital power supply (3.0-3.6 V) |
| Broche 9 | AN5 — Analog input 5 / digital I/O |
| Broche 10 | AN6 — Analog input 6 / digital I/O |
| Broche 11 | AN7 — Analog input 7 / digital I/O |
| Broche 12 | AN8 — Analog input 8 / digital I/O |
| Broche 13 | AN9 — Analog input 9 / comparator output select |
| Broche 14 | VSS — Digital ground |
| Broche 15 | VDD — Digital power supply (3.0-3.6 V) |
| Broche 16 | AN10 — Analog input 10 / digital I/O |
| Broche 17 | AN11 — Analog input 11 / digital I/O |
| Broche 18 | PGD1 — ICSP data 1 / digital I/O |
| Broche 19 | PGC1 — ICSP clock 1 / digital I/O |
| Broche 20 | PWM1L — PWM channel 1 low-side output |
| Broche 21 | PWM1H — PWM channel 1 high-side output |
| Broche 22 | PWM2L — PWM channel 2 low-side output |
| Broche 23 | PWM2H — PWM channel 2 high-side output |
| Broche 24 | PWM3L — PWM channel 3 low-side output |
| Broche 25 | PWM3H — PWM channel 3 high-side output |
| Broche 26 | OA1OUT — Op-amp 1 output |
| Broche 27 | OA1IN- — Op-amp 1 inverting input |
| Broche 28 | OA1IN+ — Op-amp 1 non-inverting input |
| Broche 29 | OA2OUT — Op-amp 2 output |
| Broche 30 | OA2IN- — Op-amp 2 inverting input |
| Broche 31 | OA2IN+ — Op-amp 2 non-inverting input |
| Broche 32 | OA3OUT — Op-amp 3 output |
| Broche 33 | OA3IN- — Op-amp 3 inverting input |
| Broche 34 | OA3IN+ — Op-amp 3 non-inverting input |
| Broche 35 | AVSS — Analog ground |
| Broche 36 | AVDD — Analog power supply |
| Broche 37 | SOSCI — Secondary oscillator input / digital I/O |
| Broche 38 | SOSCO — Secondary oscillator output / digital I/O |
| Broche 39 | OSC1 — Primary oscillator input |
| Broche 40 | OSC2 — Primary oscillator output |
| Broche 41 | VDD — Digital power supply (3.0-3.6 V) |
| Broche 42 | VSS — Digital ground |
| Broche 43 | CANRX — CAN FD receive input |
| Broche 44 | CANTX — CAN FD transmit output |
| Broche 45 | UART1_TX — UART 1 transmit (multiplexed digital I/O) |
| Broche 46 | UART1_RX — UART 1 receive (multiplexed digital I/O) |
| Broche 47 | SDA — I2C data (multiplexed digital I/O) |
| Broche 48 | SCL — I2C clock (multiplexed digital I/O) |
Applications typiques
DSPIC33CK32MP205T-I/PT convient pour 6 applications: Digital Power Supplies, Brushless DC and PMSM Motor Control, CAN FD Industrial Networking Nodes, Advanced Sensing and Conditioning, LED Lighting and Electronic Ballasts, Functional Safety and Automotive Auxiliary Systems.
Digital Power Supplies
The DSPIC33CK32MP205T-I/PT fits digital power conversion because its 100 MHz 16-bit core executes current and voltage control loops with the sample rates demanded by LLC, buck, boost, and PFC topologies, while the High-Resolution PWM module provides fine duty-cycle and phase resolution that reduces output ripple and improves transient response. The three on-chip operational amplifiers condition current-shunt signals directly, and the three comparators feed cycle-by-cycle cycle limit and fault protection into the PWM hardware without CPU latency. In a typical design the DSC samples input/output voltages and inductor current at tens to hundreds of kHz, computes the control law, and updates PWM registers per cycle. Unlike fixed-frequency analog controllers, firmware enables soft-start profiles, nonlinear gains, and PMBus/CAN FD reporting, at roughly a $2 bill-of-material cost point for the controller itself.
Recommandé
Brushless DC and PMSM Motor Control
The DSPIC33CK32MP205T-I/PT is a strong fit for sensorless FOC motor control: the 100 MHz DSP core with single-cycle MAC runs field-oriented control inner loops at 20-50 kHz switching frequencies with margin, and the High-Resolution PWM generates center-aligned three-phase drives with fine resolution that minimizes current ripple and acoustic noise. The three integrated op-amps amplify low-side shunt phase currents, and the three comparators implement hardware overcurrent trip that blanks PWM outputs within microseconds - faster than any software interrupt path. The 8KB RAM holds three-phase state variables, observer (SMO or flux-linkage) state, and communication buffers. With CAN FD on-chip, the same controller closes the torque loop and reports diagnostics on an industrial or automotive bus, eliminating a separate CAN transceiver controller. Microchip application notes for dsPIC33CK motor control use exactly this peripheral combination.
Recommandé
CAN FD Industrial Networking Nodes
With integrated CAN Flexible Data (CAN FD) support, the DSPIC33CK32MP205T-I/PT serves as an intelligent sensing and actuation node on industrial networks running at data-phase bit rates up to 8 Mbit/s class. The 100 MHz core keeps up with CAN FD message bursts while simultaneously running local control loops, and the Peripheral Trigger Generator (PTG) automates ADC sampling and PWM update sequences independent of the CPU, guaranteeing deterministic cycle times even under heavy bus traffic. The 32KB Flash is sufficient for a control application plus a compact CANopen- or J1939-style protocol stack. Typical nodes include motor drives, HVAC dampers, pump controllers, and factory I/O modules. Designers should pair the DSC with an external CAN FD transceiver on the CANTX/CANRX pins and follow Microchip layout guidance for bus stub length and common-mode choke placement.
Recommandé
Advanced Sensing and Conditioning
The DSPIC33CK32MP205T-I/PT suits advanced sensing front ends because its three op-amps can be configured as unity-gain buffers or fixed-gain amplifiers for bridge, shunt, or photodiode signals, feeding the on-chip ADC and comparators with minimal external components and short analog trace lengths. The Peripheral Trigger Generator synchronizes ADC sampling to PWM edges, letting designers sample currents at the electrically quiet center of PWM pulses - a technique that measurably reduces switching-noise error in shunt measurements. With -40C to +85C industrial temperature grading and 3.0V-3.6V operation, the device fits sealed sensors, pressure transmitters, and condition-monitoring probes. The DSP instructions accelerate digital filtering (IIR/FIR) and oversampling, so conditioned signals can be processed locally and results streamed over CAN FD or UART rather than sending raw high-rate data off-board.
Recommandé
LED Lighting and Electronic Ballasts
For high-power LED drivers and lighting ballasts, the DSPIC33CK32MP205T-I/PT combines the High-Resolution PWM module - which can drive buck, boost, or flyback power stages with fine resolution for flicker-free dimming - with the analog comparators needed for fast primary-side current limiting. The 100 MHz core runs power-factor-correction and constant-current loops concurrently with DALI/DMX-style protocol handling over UART. Using the on-chip op-amps for current sensing removes external amplifier ICs, cutting BOM cost in cost-sensitive lighting products. Dimming linearity benefits directly from the HRPWM's fine duty-cycle steps, which avoid visible brightness steps at low dimming levels where conventional PWM resolution quantizes. The industrial temperature grade and 48-TQFP (7x7 mm) footprint fit compact driver enclosures mounted near luminaires where ambient temperatures fluctuate widely.
Recommandé
Functional Safety and Automotive Auxiliary Systems
Microchip positions the dsPIC33CK32MP205 family as a Functional Safety (FuSa) capable DSC, and the DSPIC33CK32MP205T-I/PT therefore suits safety-related industrial functions and automotive auxiliary systems that leverage CAN FD connectivity - such as pump control, seat/valve actuation, and thermal management blowers. For the harshest automotive ambient zones, the DSPIC33CK32MP205T-E/PT variant extends the temperature rating to +125C in the same 48-TQFP footprint, allowing one PCB layout across industrial and automotive builds. The three comparators provide hardware-level fault reactions independent of software state, which is a foundational element of safe torque-off and safe current-limit architectures. Designers should implement clock monitoring, CRC-checked Flash usage, and independent voltage supervision per Microchip's safety design guidance and validate to the target safety integrity level of the end system.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DSPIC33CK32MP205T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DSPIC33CK32MP205T-E/PT | DSPIC33CK32MC105-E/PT | DSPIC33CK64MP205-I/PT | DSPIC33CK128MP205-E/PT | DSPIC33CK256MP205-I/PT |
|---|---|---|---|---|---|---|
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Clock | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 64 KB | 128 KB | 256 KB |
| Operating Temperature | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) |
| CAN FD | Yes | Yes | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Integrated analog front end (3 op-amps + 3 comparators) (vs DSPIC33CK32MC105-E/PT)
- Lowest cost per unit in the drop-in family (vs DSPIC33CK256MP205-I/PT)
- Extended-temperature drop-in available (vs DSPIC33CK32MP205T-E/PT)
Notes de conception
The DSPIC33CK32MP205T-I/PT operates from a 3.0V-3.6V rail. Regulate it from a clean 3.3V LDO or buck output, and decouple each VDD pin with a 100 nF ceramic capacitor placed within 2-3 mm of the pin, plus one bulk 4.7-10 uF capacitor near the package. Supply AVDD separately through an RC or ferrite filter from the digital rail to preserve ADC and op-amp accuracy - switching noise coupled onto AVDD shows up directly as ADC code noise in digital power designs.
Keep the analog op-amp input pins (OA1-OA3, ANx) away from PWM output traces to prevent capacitive coupling of switching edges into the analog front end. Route current-shunt sense traces as Kelvin connections directly to the OA inputs. For ICSP programming, note per Northern Software that any PGECx/PGEDx pair works but ICSPCLK and ICSPDAT must come from the SAME pair (e.g., PGEC2+PGED2) - include a header on one pair and do not mix pins.
Two common mistakes: (1) selecting the E-grade temperature assumption for an I-grade part - the T-I/PT is rated -40C to +85C; use DSPIC33CK32MP205T-E/PT for environments up to +125C. (2) Assuming 5V I/O tolerance; this DSC is a 3.0-3.6V device and level shifting is required for 5V logic. Also remember the T suffix means tape-and-reel; the non-T tray variant is preferable for hand assembly and prototyping.
Informations de conformité
RoHS compliance per JLCPCB product listing (dsPIC33CK32MP205T-I/PT, ROHS). AEC-Q100 qualification not stated in provided data; Microchip offers Q1 variants for automotive designs - verify with Microchip.