DSPIC33FJ128MC506A-E/MR - 40 MIPS DSC Motor Control | Microchip
Référence : DSPIC33FJ128MC506A-E/MR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $7.42 | $7,42 |
| 10 | $6.68 | $66,80 |
| 100 | $5.94 | $594,00 |
| 500 | $5.35 | $2 675,00 |
| 1 000 | $4.82 | $4 820,00 |
DSPIC33FJ128MC506A-E/MR Présentation
A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control flow of a microcontroller (MCU). Within the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes single-cycle MAC and DSP instructions for control-loop mathematics while integrating motor-control peripherals such as PWM modules and high-speed ADCs on the same silicon, eliminating external signal-chain components.
Key features include 128 KB (128K x 8) self-programming Flash, 8 KB of RAM, 8 DMA channels that move data between peripherals and memory without CPU intervention, 11 timers, and 4 serial I/O ports. The -E temperature suffix guarantees operation to +125C, enabling enclosed motor-drive environments where standard -40C to +85C parts would be marginal.
Architecturally, the dsPIC33FJ128MC506A is built on CMOS technology and executes an optimized 16-bit RISC core with DSP instruction extensions. The modified Harvard architecture with separate program and data buses allows simultaneous instruction fetch and operand access, sustaining the 40 MIPS rate (at 3.3 V operation) needed for high-bandwidth field-oriented control.
Typical applications include brushless DC (BLDC) motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, and unified coordinate conversion tasks, per the Microchip product page. Digital power conversion (PFC, inverters) also fits the on-chip PWM and ADC complement.
Design consideration: this is a 3.3 V device; level-shift interface circuitry is required when connecting to 5 V peripherals or gate drivers, and the exposed pad must be soldered to a ground pour for thermal and signal-integrity performance.
This page synthesizes distributor pricing, drop-in alternatives, AEC-Q100 compliance detail, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour DSPIC33FJ128MC506A-E/MR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec DSPIC33FJ128MC506A-E/MR (même facteur de forme et même empreinte) — différant par Package, Core Architecture, Operating Temperature, RoHS Status, Core.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
DSPIC33FJ128MC506A-E/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$6.9 / unité
Voir la fiche technique →DSPIC33FJ128MC506A-I/MR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.42 / unité
Voir la fiche technique →DSPIC33FJ256MC506A-E/MR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
DSPIC33FJ64MC506A-E/MR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.8 / unité
Voir la fiche technique →DSPIC33EP64MC506-E/MR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$3.86 / unité
Voir la fiche technique →DSPIC33FJ128MC506A-E/MR Valeurs maximales et caractéristiques électriques
| Core | dsPIC33F 16-bit RISC with DSP extensions |
| Max Clock Frequency | 40 MHz |
| Performance | 40 MIPS |
| Program Memory Size | 128 KB (128K x 8) Flash |
| RAM Size | 8 KB |
| Tension d'alimentation | 3.3 V |
| DMA Channels | 8 |
| Timers | 11 |
| Serial I/O Ports | 4 |
| Technology | CMOS |
| Température de fonctionnement | -40C to +125C (E grade) |
| Boîtier | 64-VQFN (9x9 mm) with Exposed Pad |
| Type de montage | Surface Mount |
| Qualification | AEC-Q100 Automotive |
| Packaging | Tube |
| Statut RoHS | Compliant |
| Typical Applications | BLDC, induction, switched reluctance motor control |
Guide de configuration des broches du DSPIC33FJ128MC506A-E/MR 64-vqfn (9x9 mm) with exposed pad
Configuration des broches du DSPIC33FJ128MC506A-E/MR (boîtier 64-vqfn (9x9 mm) with exposed pad). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour DSPIC33FJ128MC506A-E/MR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
DSPIC33FJ128MC506A-E/MR convient pour 6 applications: Brushless DC (BLDC) Motor Control, 3-Phase Induction Motor Drives, Digital Power Conversion (PFC and Inverters), Automotive Auxiliary Motor Systems, Switched Reluctance Motor (SRM) Drives, Unified Coordinate Conversion and Embedded DSP Processing.
Brushless DC (BLDC) Motor Control
The dsPIC33FJ128MC506A family is explicitly designed by Microchip for BLDC motor control. Its 40 MIPS 16-bit DSP core executes sensorless field-oriented control or six-step commutation loops fast enough for high-speed spindle and pump motors, while the on-chip motor-control PWM peripherals generate complementary complementary outputs with dead-time insertion. The 8 DMA channels stream ADC current-sense samples into RAM without CPU intervention, keeping interrupt latency deterministic at 3.3 V operation. Placing commutation, current-loop, and speed-loop code entirely in the 128 KB Flash eliminates an external DSP, cutting BOM cost. The -40C to +125C E-grade rating suits enclosed motor housings where ambient temperatures exceed standard commercial limits.
Recommandé
3-Phase Induction Motor Drives
Single- and 3-phase induction motor control is a primary target application listed by Microchip for the dsPIC33FJ128MC506A. The 40 MHz / 40 MIPS core performs the V/Hz and vector-control mathematics, including Clarke/Park transforms, at control-loop rates unattainable by general-purpose 8-bit MCUs. Its 11 timers provide time bases for PWM generation, encoder capture, and task scheduling simultaneously, while 4 serial I/O ports connect to operator interfaces or fieldbus transceivers. With 128 KB of Flash, complete sensorless algorithms plus parameter tables fit on chip. The AEC-Q100 qualification and extended temperature range make the -E/MR variant appropriate for industrial HVAC drives and automotive auxiliary pump systems alike.
Recommandé
Digital Power Conversion (PFC and Inverters)
Digital power supplies, power-factor-correction stages, and DC-AC inverters demand fast, deterministic control loops - precisely the dsPIC33FJ128MC506A's strength. The 16-bit DSP core with single-cycle MAC instructions executes inner current loops at tens of kHz, and the 8 DMA channels move ADC results to memory without CPU stalls, keeping loop jitter minimal at 3.3 V. The 128 KB Flash holds multiple compensation profiles for mode switching (CCM/DCM, burst), and the 11 timers coordinate phase-shifted PWM for interleaved topologies. Extended -40C to +125C operation suits power stages mounted near heat-generating semiconductors, and AEC-Q100 qualification supports onboard charger and telecom rectifier designs.
Recommandé
Automotive Auxiliary Motor Systems
With AEC-Q100 qualification and a -40C to +125C operating range, the DSPIC33FJ128MC506A-E/MR targets vehicular subsystems such as electronic water pumps, HVAC blowers, throttle actuators, and cooling-fan drives. The 40 MIPS DSP headroom runs sensorless algorithms that survive harsh electromagnetic environments, while 4 serial I/O ports interface to LIN or CAN transceivers for body-controller communication. The 64-pin VQFN with exposed pad provides the thermal performance needed when the controller shares a PCB with the gate-driver stage. Its CMOS process and 3.3 V operation keep quiescent consumption compatible with always-on automotive rails where key-off battery drain is scrutinized.
Recommandé
Switched Reluctance Motor (SRM) Drives
Microchip lists switched reluctance motors as a supported topology for the dsPIC33FJ128MC506A family. SRM control requires precise phase-angle commutation derived from rotor position estimation, heavy real-time computation that benefits from the 40 MHz core's DSP multiply-accumulate throughput. The multiple on-chip timers implement the asymmetric PWM schemes SRM phases demand, and the 8 DMA channels offload position-sensor or current-harness data handling. With 128 KB Flash, flux-linkage characteristic tables and torque-sharing functions reside on chip for smooth torque production. The robust extended-temperature, AEC-Q100-qualified packaging suits the vibration- and heat-prone environments where SRMs are increasingly adopted.
Recommandé
Unified Coordinate Conversion and Embedded DSP Processing
Beyond motor control, Microchip notes the dsPIC33F Motor Control family is well-suited for unified coordinate conversion tasks - transforming sensor data between reference frames in navigation, robotics, and instrumentation. The 16-bit DSP engine executes matrix arithmetic and FIR/IIR filtering with single-cycle MAC at 40 MIPS, while 8 KB RAM buffers transformation working sets. The 4 serial I/O ports stream results to host processors or displays, and 11 timers schedule sampling uniformly to avoid aliasing. The 128 KB Flash retains calibration coefficients across power cycles, and the VQFN-64 footprint integrates into compact sensor heads where a separate DSP chip would be impractical.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DSPIC33FJ128MC506A-E/MR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DSPIC33FJ128MC506A-E/PT | DSPIC33FJ128MC506A-I/MR | DSPIC33FJ256MC506A-E/MR | DSPIC33FJ64MC506A-E/MR | DSPIC33EP64MC506-E/MR |
|---|---|---|---|---|---|---|
| Package | 64-VQFN (9x9) EP | 64-TQFP | 64-VQFN (9x9) EP - same | 64-VQFN (9x9) EP - same | 64-VQFN (9x9) EP - same | 64-VQFN (9x9) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 128 KB | 256 KB | 64 KB | 64 KB |
| Operating Temperature | -40C to +125C (E) | -40C to +125C | -40C to +85C | -40C to +125C | -40C to +125C | -40C to +125C |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
Principaux différenciateurs
- Extended -40C to +125C automotive-grade temperature range (vs DSPIC33FJ128MC506A-I/MR)
- Balanced 128 KB Flash for full sensorless algorithms (vs DSPIC33FJ64MC506A-E/MR)
- Cost-optimized within the same 64-VQFN footprint (vs DSPIC33FJ256MC506A-E/MR)
Notes de conception
The dsPIC33FJ128MC506A operates from a 3.3 V supply. Provide local decoupling: a 0.1 uF ceramic capacitor at each VDD/VSS pair plus one bulk 10 uF capacitor per the Microchip family datasheet power guidelines. When interfacing 5 V peripherals (legacy gate drivers, sensors), add level shifters - dsPIC33F I/O is not 5 V tolerant. For motor drive designs, separate the analog 3.3 V rail (filtered via ferrite bead) from the noisy digital rail to preserve ADC accuracy for current-sense feedback.
The MR (VQFN 9x9 mm) package has an exposed pad that must be soldered to a ground pour - it is the primary ground and thermal path. Use a grid of thermal vias (typically 5x5) beneath the pad connecting to internal ground planes. Keep the crystal/oscillator traces short and guard them from PWM output lines carrying fast switching edges. Route ADC current-sense traces differentially and away from gate-drive signals to minimize noise coupling into the control loop.
Do not confuse package suffixes: /MR is 64-VQFN, /PT is 64-TQFP - footprints are not interchangeable. Note that the 'A' die revision (this part) corrected errata present in the original dsPIC33FJ128MC506; always reference the A-revision documentation. Finally, the -E grade is required only above +85C ambient - specifying it unnecessarily increases cost, while omitting it in hot enclosures risks field failures.
Informations de conformité
AEC-Q100 automotive qualification per datasheets.com part record; RoHS compliant and lead-free per Microchip standard product status.
