EFM32LG842F64-QFP64 - 48MHz Cortex-M3 MCU | Silicon Labs
Référence : EFM32LG842F64-QFP64 ✓ ActifEFM32LG842F64-QFP64 Présentation
A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The EFM32LG belongs to the ARM Cortex-M3 microcontrollers hierarchy, where the Cortex-M3 core provides a compact 32-bit RISC architecture for control-oriented products. Within the Silicon Labs portfolio, the Leopard Gecko family combines computational performance with autonomous peripherals, allowing time-critical tasks to continue with reduced processor involvement.
The EFM32LG842F64-QFP64 provides 64 KB of flash for firmware and 32 KB of RAM for working memory. Its 48 MHz maximum clock speed supports responsive control, communication, and user-interface tasks, while the integrated LCD controller can drive an 8x18 display. Hardware AES accelerates encrypted data handling, and the integrated analog and timing resources reduce the need for external components in sensor, industrial-control, and embedded user-interface designs.
Silicon Labs describes the EFM32LG platform as offering 211 uA/MHz in Run mode and consumption as low as 0.65 uA in Stop mode. These figures make the device relevant to battery-powered equipment that spends much of its operating life in a low-power state. The memory protection unit and wake-up interrupt controller support safer firmware execution and event-driven wake-up behavior.
Typical uses include portable measurement instruments, compact industrial controllers, sensor nodes, access-control equipment, and low-power LCD products. The 3.3 V-oriented supply range and integrated display interface are particularly useful in compact products where board area and energy consumption are constrained. The 64-pin TQFP package also provides a practical route to prototyping through conventional surface-mount assembly.
When laying out the board, provide a stable supply close to the power pins and route high-current or high-speed signals away from sensitive analog inputs. Confirm the complete peripheral pin assignments, decoupling requirements, clock options, and programming interface against the manufacturer datasheet before releasing PCB artwork. The 1.98 V to 3.8 V operating range should be checked against every external sensor and transceiver used with the MCU.
This page consolidates the verified electrical characteristics, package information, drop-in alternatives, comparison parameters, and practical design guidance needed to evaluate the EFM32LG842F64-QFP64 alongside other Cortex-M3 and EFM32 devices.
Alternatives de remplacement direct pour EFM32LG842F64-QFP64 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EFM32LG842F64-QFP64 (même facteur de forme et même empreinte) — différant par Flash Memory, Maximum CPU Frequency, Package, RAM Memory, Series.
EFM32LG842F64G-E-QFP64
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32LG842F64-QFP64T
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32LG842F128G-E-QFP64
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32G842F64-QFP64
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →EFM32LG232F64G-F-QFP64R
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32LG842F64-QFP64 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | Leopard Gecko |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| RAM Memory | 32 KB |
| Supply Voltage Range | 1.98 V to 3.8 V |
| LCD Controller | 8 x 18 segments |
| Security Accelerator | AES hardware accelerator |
| Run Mode Current | 211 uA/MHz |
| Stop Mode Current | 0.65 uA |
| Processor Architecture | 32-bit ARM Cortex-M3 RISC |
| Memory Protection Unit | Up to 8 memory segments |
| Wake-Up Interrupt Controller | Integrated |
| Boîtier | 64-pin TQFP (10 x 10 mm) |
| Type de montage | Surface mount |
| Lead-Free Status | Lead free |
| Statut RoHS | RoHS compliant |
Guide de configuration des broches du EFM32LG842F64-QFP64 64-pin tqfp (10 x 10 mm)
Configuration des broches du EFM32LG842F64-QFP64 (boîtier 64-pin tqfp (10 x 10 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EFM32LG842F64-QFP64.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EFM32LG842F64-QFP64 convient pour 6 applications: Battery-Powered Measurement Instrument, Industrial Sensor and Control Node, LCD Access-Control Terminal, Portable Environmental Monitor, Compact HMI Controller, Low-Power Data Acquisition Module.
Battery-Powered Measurement Instrument
The EFM32LG842F64-QFP64 fits portable measurement instruments that combine a local display with low-power sensor acquisition. Its 48 MHz Cortex-M3 core provides responsive control and calculation, while 64 KB of flash and 32 KB of RAM support embedded firmware and working buffers. The integrated 8x18 LCD controller simplifies segmented-display designs, and Stop-mode current as low as 0.65 uA helps preserve battery life between readings. The 1.98 V to 3.8 V supply range also permits a low-voltage 3.3 V architecture when all external components share compatible voltage levels.
Recommandé
Industrial Sensor and Control Node
The EFM32LG842F64-QFP64 is appropriate for compact industrial nodes that acquire sensor data, perform local logic, and report status through available serial interfaces. Its 48 MHz ARM Cortex-M3 core and 64 KB flash provide a practical balance for protocol handling and embedded control, while 32 KB of RAM supports buffering. Autonomous peripherals can execute time-critical tasks without constant processor intervention. For industrial deployments, engineers should verify the exact operating-temperature grade and EMC requirements rather than infer them solely from the commercial ordering code.
Recommandé
LCD Access-Control Terminal
An access-control terminal benefits from the EFM32LG842F64-QFP64's integrated 8x18 LCD controller, 32-bit Cortex-M3 processing, and hardware AES support. The LCD interface can operate locally without a separate display controller, while AES acceleration supports encrypted credential or communication handling. At 64 KB flash and 32 KB RAM, the device is best suited to focused embedded user-interface tasks rather than large graphical applications. Validate the exact LCD voltage, pin multiplexing, and security architecture against the manufacturer pin and application information.
Recommandé
Portable Environmental Monitor
The EFM32LG842F64-QFP64 supports portable environmental monitoring by combining sensor control, event-driven operation, and low-power standby in one device. The 48 MHz core can service multiple acquisition and filtering tasks, while the memory-protection unit helps isolate firmware regions in connected equipment. Stop-mode current as low as 0.65 uA is attractive when the monitor wakes only for scheduled samples or threshold events. The design must allocate the external sensor interface and radio carefully within the available 64-pin package and 1.98 V to 3.8 V supply range.
Recommandé
Compact HMI Controller
The EFM32LG842F64-QFP64 can serve as the controller for a compact human-machine interface built around a segmented LCD and local inputs. Its 8x18 LCD controller directly addresses common industrial and instrument displays, while 48 MHz execution supports responsive debouncing, menu logic, and data formatting. The integrated memory protection unit and wake-up interrupt controller improve firmware organization and event responsiveness. This application is best suited to text and segmented displays; graphical panels generally require more memory and display bandwidth than the MCU provides.
Recommandé
Low-Power Data Acquisition Module
The EFM32LG842F64-QFP64 fits low-power data-acquisition modules that periodically collect analog or digital sensor information and then sleep between events. Its 48 MHz Cortex-M3 core provides enough throughput for filtering and control, while the energy-aware peripherals and 0.65 uA Stop-mode figure improve battery utilization. The 64 KB flash capacity supports compact firmware, and 32 KB RAM can hold acquisition buffers. Engineers should confirm ADC characteristics, reference requirements, and pin multiplexing directly in the EFM32LG842 documentation before final circuit selection.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EFM32LG842F64-QFP64 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EFM32LG842F64G-E-QFP64 | EFM32LG842F64-QFP64T | EFM32LG842F128G-E-QFP64 | EFM32G842F64-QFP64 | EFM32LG232F64G-F-QFP64R |
|---|---|---|---|---|---|---|
| Manufacturer | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-pin TQFP (10 x 10 mm) | 64-pin TQFP - same package format | 64-pin TQFP - same package format | 64-pin TQFP - same package format | 64-pin TQFP - same package format | 64-pin TQFP - same package format |
| Flash Memory | 64 KB | 64 KB | 64 KB | 128 KB | 64 KB | 64 KB |
| Series | Leopard Gecko | Leopard Gecko | Leopard Gecko | Leopard Gecko | Gecko | Leopard Gecko |
Principaux différenciateurs
- Higher clock speed than the listed EFM32G842F64-QFP64 (vs EFM32G842F64-QFP64)
- Matches the closest identified suffix candidate in core and memory configuration (vs EFM32LG842F64G-E-QFP64)
- Lower flash capacity than the same-package F128 family option (vs EFM32LG842F128G-E-QFP64)
Notes de conception
Design the supply rail for the full 1.98 V to 3.8 V operating range and place the required bypass capacitors close to the MCU power pins. For a typical 3.3 V design, verify that every connected sensor, transceiver, and display interface remains compatible with the selected MCU operating point. Use the manufacturer's power-pin and decoupling guidance for the exact package rather than relying on generic bulk-capacitor values.
Assign programming, reset, clock, and debug signals only after checking the complete 64-pin QFP drawing and alternate-function table. Keep sensitive analog inputs away from switching nodes and high-current return paths, and provide short ground returns. Because the target is a leaded 64-pin TQFP, inspect lead pitch, pad dimensions, paste apertures, and courtyard clearance during footprint review before PCB fabrication.
The 48 MHz Cortex-M3 core can consume more current than a low-frequency MCU, although total dissipation depends on utilization and active peripherals. Use the silicon Labs EFM32LG datasheet power data to estimate average consumption and junction conditions. Keep exposed copper available for thermal spreading, and do not infer thermal performance from the package type alone when the final operating environment and enclosure restrict heat dissipation.
Do not substitute a related EFM32 part solely because the flash size and package count match. Confirm the complete pin table, suffix-specific temperature grade, clock limit, peripheral set, qualification requirements, and software-support status. In particular, the EFM32G842F64-QFP64 candidate is listed at 32 MHz rather than the target's 48 MHz, so timing-dependent designs require careful review before migration.
Informations de conformité
The EFM32LG842F64 listing identifies RoHS-compliant and lead-free construction. Reach, halogen-free, and conflict-minerals status are unknown. AEC-Q100 qualification is not applicable because this ordering code is not identified as an automotive-qualified variant.