Silicon Labs

EFM32LG842F64-QFP64 - 48MHz Cortex-M3 MCU | Silicon Labs

部品番号: EFM32LG842F64-QFP64 ✓ 生産中
1.98 V to 3.8 V Vdss 211 uA/MHz Id 64-pin TQFP (10 x 10 mm) Package 48 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

EFM32LG842F64-QFP64 概要

The Silicon Labs EFM32LG842F64-QFP64 is a 32-bit ARM Cortex-M3 microcontroller in the Leopard Gecko family, operating up to 48 MHz with 64 KB of flash memory and 32 KB of RAM in a 64-pin TQFP package. It operates from a 1.98 V to 3.8 V supply range and integrates an 8x18 LCD controller, hardware AES support, and low-power peripherals for energy-conscious embedded systems.

A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The EFM32LG belongs to the ARM Cortex-M3 microcontrollers hierarchy, where the Cortex-M3 core provides a compact 32-bit RISC architecture for control-oriented products. Within the Silicon Labs portfolio, the Leopard Gecko family combines computational performance with autonomous peripherals, allowing time-critical tasks to continue with reduced processor involvement.

The EFM32LG842F64-QFP64 provides 64 KB of flash for firmware and 32 KB of RAM for working memory. Its 48 MHz maximum clock speed supports responsive control, communication, and user-interface tasks, while the integrated LCD controller can drive an 8x18 display. Hardware AES accelerates encrypted data handling, and the integrated analog and timing resources reduce the need for external components in sensor, industrial-control, and embedded user-interface designs.

Silicon Labs describes the EFM32LG platform as offering 211 uA/MHz in Run mode and consumption as low as 0.65 uA in Stop mode. These figures make the device relevant to battery-powered equipment that spends much of its operating life in a low-power state. The memory protection unit and wake-up interrupt controller support safer firmware execution and event-driven wake-up behavior.

Typical uses include portable measurement instruments, compact industrial controllers, sensor nodes, access-control equipment, and low-power LCD products. The 3.3 V-oriented supply range and integrated display interface are particularly useful in compact products where board area and energy consumption are constrained. The 64-pin TQFP package also provides a practical route to prototyping through conventional surface-mount assembly.

When laying out the board, provide a stable supply close to the power pins and route high-current or high-speed signals away from sensitive analog inputs. Confirm the complete peripheral pin assignments, decoupling requirements, clock options, and programming interface against the manufacturer datasheet before releasing PCB artwork. The 1.98 V to 3.8 V operating range should be checked against every external sensor and transceiver used with the MCU.

This page consolidates the verified electrical characteristics, package information, drop-in alternatives, comparison parameters, and practical design guidance needed to evaluate the EFM32LG842F64-QFP64 alongside other Cortex-M3 and EFM32 devices.

ドロップイン代替品: EFM32LG842F64-QFP64 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: EFM32LG842F64-QFP64 (同一形状・フットプリント) — 相違点: Flash Memory, Maximum CPU Frequency, Package, RAM Memory, Series.

Silicon Labs
Flash Memory: 64 kB
Maximum CPU Frequency: 32 MHz
Package: 64-TQFP, 10 mm × 10 mm
比較対象 EFM32LG842F64-QFP64 →

EFM32LG842F64G-E-QFP64

✅ ドロップイン
📦 64-pin TQFP (10 x 10 mm)
Ordering suffix differs while the listed 48 MHz Cortex-M3 core, 64 KB flash, and 64-pin TQFP configuration remain the same

📋 参考代替品(カタログ未掲載)

EFM32LG842F64-QFP64T

✅ ドロップイン
📦 64-pin TQFP (10 x 10 mm)
Production or packing suffix differs; listed core and package identity remain unchanged

📋 参考代替品(カタログ未掲載)

EFM32LG842F128G-E-QFP64

✅ ドロップイン
📦 64-pin TQFP (10 x 10 mm)
Flash increases from 64 KB to 128 KB, a 100% increase, while retaining the 64-pin QFP family footprint

📋 参考代替品(カタログ未掲載)

EFM32G842F64-QFP64

✅ ドロップイン
Silicon Labs
📦 64-pin TQFP (10 x 10 mm)
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 32 MHz · 64 kB · 16 kB · 53 · 3 × 16-bit · 1.98 V to 3.8 V

価格はお問い合わせください

データシートを見る →

EFM32LG232F64G-F-QFP64R

✅ ドロップイン
📦 64-pin TQFP (10 x 10 mm)
Lower-tier EFM32LG family member with the same 64 KB flash configuration and 64-pin QFP footprint; verify speed and peripheral differences

📋 参考代替品(カタログ未掲載)

EFM32LG842F64-QFP64 最大定格&電気的特性

Product Type 32-bit ARM Cortex-M3 microcontroller
Series Leopard Gecko
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB (64K x 8)
RAM Memory 32 KB
Supply Voltage Range 1.98 V to 3.8 V
LCD Controller 8 x 18 segments
Security Accelerator AES hardware accelerator
Run Mode Current 211 uA/MHz
Stop Mode Current 0.65 uA
Processor Architecture 32-bit ARM Cortex-M3 RISC
Memory Protection Unit Up to 8 memory segments
Wake-Up Interrupt Controller Integrated
パッケージ 64-pin TQFP (10 x 10 mm)
実装タイプ Surface mount
Lead-Free Status Lead free
RoHS ステータス RoHS compliant

EFM32LG842F64-QFP64 64-pin tqfp (10 x 10 mm) ピン配置ガイド

EFM32LG842F64-QFP64 (64-pin tqfp (10 x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

EFM32LG842F64-QFP64 の 64-pin tqfp (10 x 10 mm) パッケージピン配置図

詳細なピン配置データはありません: EFM32LG842F64-QFP64.

詳細は データシート をご参照ください。

主な用途

EFM32LG842F64-QFP64 の用途: 6 件s: Battery-Powered Measurement Instrument, Industrial Sensor and Control Node, LCD Access-Control Terminal, Portable Environmental Monitor, Compact HMI Controller, Low-Power Data Acquisition Module.

🔋

Battery-Powered Measurement Instrument

The EFM32LG842F64-QFP64 fits portable measurement instruments that combine a local display with low-power sensor acquisition. Its 48 MHz Cortex-M3 core provides responsive control and calculation, while 64 KB of flash and 32 KB of RAM support embedded firmware and working buffers. The integrated 8x18 LCD controller simplifies segmented-display designs, and Stop-mode current as low as 0.65 uA helps preserve battery life between readings. The 1.98 V to 3.8 V supply range also permits a low-voltage 3.3 V architecture when all external components share compatible voltage levels.

🏭

Industrial Sensor and Control Node

The EFM32LG842F64-QFP64 is appropriate for compact industrial nodes that acquire sensor data, perform local logic, and report status through available serial interfaces. Its 48 MHz ARM Cortex-M3 core and 64 KB flash provide a practical balance for protocol handling and embedded control, while 32 KB of RAM supports buffering. Autonomous peripherals can execute time-critical tasks without constant processor intervention. For industrial deployments, engineers should verify the exact operating-temperature grade and EMC requirements rather than infer them solely from the commercial ordering code.

🔐

LCD Access-Control Terminal

An access-control terminal benefits from the EFM32LG842F64-QFP64's integrated 8x18 LCD controller, 32-bit Cortex-M3 processing, and hardware AES support. The LCD interface can operate locally without a separate display controller, while AES acceleration supports encrypted credential or communication handling. At 64 KB flash and 32 KB RAM, the device is best suited to focused embedded user-interface tasks rather than large graphical applications. Validate the exact LCD voltage, pin multiplexing, and security architecture against the manufacturer pin and application information.

🌐

Portable Environmental Monitor

The EFM32LG842F64-QFP64 supports portable environmental monitoring by combining sensor control, event-driven operation, and low-power standby in one device. The 48 MHz core can service multiple acquisition and filtering tasks, while the memory-protection unit helps isolate firmware regions in connected equipment. Stop-mode current as low as 0.65 uA is attractive when the monitor wakes only for scheduled samples or threshold events. The design must allocate the external sensor interface and radio carefully within the available 64-pin package and 1.98 V to 3.8 V supply range.

🖥️

Compact HMI Controller

The EFM32LG842F64-QFP64 can serve as the controller for a compact human-machine interface built around a segmented LCD and local inputs. Its 8x18 LCD controller directly addresses common industrial and instrument displays, while 48 MHz execution supports responsive debouncing, menu logic, and data formatting. The integrated memory protection unit and wake-up interrupt controller improve firmware organization and event responsiveness. This application is best suited to text and segmented displays; graphical panels generally require more memory and display bandwidth than the MCU provides.

📡

Low-Power Data Acquisition Module

The EFM32LG842F64-QFP64 fits low-power data-acquisition modules that periodically collect analog or digital sensor information and then sleep between events. Its 48 MHz Cortex-M3 core provides enough throughput for filtering and control, while the energy-aware peripherals and 0.65 uA Stop-mode figure improve battery utilization. The 64 KB flash capacity supports compact firmware, and 32 KB RAM can hold acquisition buffers. Engineers should confirm ADC characteristics, reference requirements, and pin multiplexing directly in the EFM32LG842 documentation before final circuit selection.

おすすめ製品の概要

EFM32LG842F64G-E-QFP64 Same-family EFM32LG842 MCU option 使用用途: Battery-Powered Measurement Instrument, Industrial Sensor and Control Node EFM32LG842F64-QFP64T Same-device ordering configuration 使用用途: LCD Access-Control Terminal EFM32LG232F64G-F-QFP64R Same-package EFM32LG family candidate 使用用途: Portable Environmental Monitor EFM32LG842F128G-E-QFP64 Same-footprint family option with increased flash 使用用途: Compact HMI Controller EFM32G842F64-QFP64 Silicon Labs 使用用途: Low-Power Data Acquisition Module
What is the EFM32LG842F64-QFP64?
The EFM32LG842F64-QFP64 is a Silicon Labs Leopard Gecko 32-bit ARM Cortex-M3 microcontroller rated up to 48 MHz, with 64 KB of flash memory and 32 KB of RAM. It also includes an 8x18 LCD controller and hardware AES support in a 64-pin TQFP package. According to the Silicon Labs EFM32LG datasheet, the device combines autonomous peripherals with low-power operating modes for embedded control applications.
What are the key specifications of EFM32LG842F64-QFP64 that engineers should know?
The principal EFM32LG842F64-QFP64 specifications are a 48 MHz ARM Cortex-M3 core, 64 KB of flash, 32 KB of RAM, and a 1.98 V to 3.8 V operating supply range. The device provides an 8x18 LCD controller and AES hardware acceleration in a 64-pin TQFP package. The Silicon Labs EFM32LG datasheet also reports 211 uA/MHz in Run mode and consumption as low as 0.65 uA in Stop mode.
Where can I download the EFM32LG842F64-QFP64 datasheet PDF?
The EFM32LG842F64-QFP64 datasheet PDF can be downloaded from the Silicon Labs EFM32LG data-sheet page at https://www.silabs.com/documents/public/data-sheets/efm32lg-datasheet.pdf. The document contains family-level electrical characteristics, memory details, power-management information, and peripheral descriptions for the EFM32LG devices. Use the device-specific ordering information to confirm the exact QFP64 configuration.
Where can I find the EFM32LG842F64-QFP64 pinout?
The EFM32LG842F64-QFP64 pinout is defined in the pin-configuration section of the Silicon Labs EFM32LG842 family datasheet, including the 64-pin QFP package drawing and alternate-function assignments. The MCU uses a 64-pin TQFP package, but a numerically complete, pin-by-pin web extract is not available here, so consult the manufacturer drawing before assigning PCB nets or programming a footprint.
What supply voltage does the EFM32LG842F64-QFP64 require?
The EFM32LG842F64-QFP64 operates from 1.98 V to 3.8 V according to the Silicon Labs EFM32LG data sheet. This range supports low-voltage 3.3 V embedded systems while allowing operation below a nominal 3.3 V rail when the external circuitry and operating conditions permit. Confirm decoupling, clock, and peripheral constraints in the device documentation before finalizing the power architecture.
Is the EFM32LG842F64-QFP64 suitable for low-power applications?
Yes, the EFM32LG842F64-QFP64 is suitable for low-power applications because the Leopard Gecko platform supports an operating current as low as 0.65 uA in Stop mode. The Silicon Labs EFM32LG data sheet reports 211 uA/MHz in Run mode. Autonomous peripherals and the wake-up interrupt controller can reduce processor activity when a system mainly waits for external events.
What can replace the EFM32LG842F64-QFP64?
The closest same-footprint replacement identified for the EFM32LG842F64-QFP64 is the EFM32LG842F64G-E-QFP64, which uses the same 64-pin TQFP format and provides the same core, memory, and peripheral class. Pin assignments should still be checked in the manufacturer package drawings before substitution. Additional package, clock, temperature, or qualification differences can make a nominally similar part unsuitable for a production redesign.
Is EFM32LG842F64-QFP64 the same as EFM32LG842F64G-E-QFP64?
The EFM32LG842F64-QFP64 and EFM32LG842F64G-E-QFP64 are closely related 64-pin TQFP devices in the same EFM32LG842 family. The compared listings identify both as 32-bit Cortex-M3 microcontrollers with 64 KB of flash. They are not interchangeable without checking the ordering suffix, package drawing, temperature grade, production configuration, and pin table because those attributes are not fully described in the comparison excerpt.
EFM32LG842F64-QFP64 vs EFM32LG842F64G-E-QFP64: which is better for a new design?
Choose the EFM32LG842F64-QFP64 when it matches the required ordering configuration, production status, and device-specific documentation. Choose the EFM32LG842F64G-E-QFP64 when that suffix is the supported configuration for the target program. Both are presented as 64-pin Cortex-M3 Leopard Gecko devices with 64 KB of flash, so final selection should compare suffix-specific temperature, packing, lifecycle, and qualification requirements.
When should I choose the EFM32LG842F64-QFP64 over another 64-pin MCU?
Choose the EFM32LG842F64-QFP64 when a design needs a 48 MHz Cortex-M3 core, 64 KB of flash, 32 KB of RAM, an integrated 8x18 LCD controller, and low-power modes in a 64-pin TQFP. It is especially relevant to battery-powered instruments and compact user-interface products. Select another MCU when the board requires more memory, a different package, stronger automotive qualification, or peripherals not present in the EFM32LG.
Is the EFM32LG842F64-QFP64 suitable for an LCD-based sensor node?
The EFM32LG842F64-QFP64 is suitable for an LCD-based sensor node that fits within 64 KB of flash and 32 KB of RAM. Its integrated 8x18 LCD controller removes the need for a separate display interface, while Stop-mode current as low as 0.65 uA supports long idle periods. The design must still account for sensor conditioning, display voltage requirements, and the MCU's 1.98 V to 3.8 V supply range.
What is the best Silicon Labs equivalent for EFM32LG842F64-QFP64?
The best identified Silicon Labs-family equivalent is the EFM32LG842F64G-E-QFP64 because it retains the EFM32LG842 identity, 64 KB flash configuration, Cortex-M3 architecture, and 64-pin TQFP footprint. This is a family-level migration candidate rather than a universal substitute. Verify the complete pin table, package dimensions, operating-temperature range, and firmware-support implications before using it as a drop-in replacement.
How much current does the EFM32LG842F64-QFP64 use?
The Silicon Labs EFM32LG data sheet reports 211 uA/MHz in Run mode and consumption as low as 0.65 uA in Stop mode for the EFM32LG platform. Actual current depends on clock frequency, active peripherals, flash execution state, and the selected low-power mode. Use those figures for architectural comparison, then measure the complete board under the operating conditions required by the product.
Where can I buy EFM32LG842F64-QFP64 online?
Use the Request a Quote form on this page to request the EFM32LG842F64-QFP64, current lead time, stock status, and order quantity. The form is the appropriate route for an exact-Suffix sourcing request and helps prevent accidental substitutions of related EFM32LG devices. Confirm the package, temperature grade, packing option, firmware support, and delivery requirements before approving the order.
What is the price of EFM32LG842F64-QFP64?
Current commercial pricing for the exact EFM32LG842F64-QFP64 should be requested through the Request a Quote form on this page. The listing does not provide a qualifying quantity-break table, so no unit-price figure is asserted. Include your target quantity, packaging preference, production schedule, and approved vendor requirements with the request for an actionable quotation.
What is the lead time and stock status of EFM32LG842F64-QFP64?
Current lead time, stock status, and minimum order quantity for EFM32LG842F64-QFP64 should be confirmed through the Request a Quote form on this page. The available listing establishes the exact device and package but does not state a current inventory quantity or production lead time. Ask the supplier to identify the manufacturer, suffix, packing configuration, and origin associated with the quoted allocation.

エンジニアリング参考データ: EFM32LG842F64-QFP64 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the EFM32LG842F64-QFP64 for a 64-pin embedded design that needs a 48 MHz ARM Cortex-M3, 64 KB of flash, 32 KB of RAM, an integrated 8x18 LCD controller, and low-power operation. The EFM32LG842F64G-E-QFP64 is the closest identified same-family migration candidate because its listed core, memory, and package configuration align, but suffix-specific production and qualification attributes still require confirmation. Consider EFM32LG842F128G-E-QFP64 when firmware growth requires 128 KB of flash while retaining the 64-pin footprint. Consider EFM32G842F64-QFP64 only when 32 MHz is sufficient and its family differences have been validated. EFM32LG232F64G-F-QFP64R can suit applications that need 64 KB of flash in the same package but do not require the full LG842 feature set. Before replacing any candidate, verify pin multiplexing, timing, temperature range, peripheral differences, and firmware support.

代替品との比較

パラメータ この製品 EFM32LG842F64G-E-QFP64 EFM32LG842F64-QFP64T EFM32LG842F128G-E-QFP64 EFM32G842F64-QFP64 EFM32LG232F64G-F-QFP64R
Manufacturer Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 64-pin TQFP (10 x 10 mm) 64-pin TQFP - same package format 64-pin TQFP - same package format 64-pin TQFP - same package format 64-pin TQFP - same package format 64-pin TQFP - same package format
Flash Memory 64 KB 64 KB 64 KB 128 KB 64 KB 64 KB
Series Leopard Gecko Leopard Gecko Leopard Gecko Leopard Gecko Gecko Leopard Gecko

主な差別化要因

  • Higher clock speed than the listed EFM32G842F64-QFP64 (vs EFM32G842F64-QFP64)
  • Matches the closest identified suffix candidate in core and memory configuration (vs EFM32LG842F64G-E-QFP64)
  • Lower flash capacity than the same-package F128 family option (vs EFM32LG842F128G-E-QFP64)

設計ノート

Design the supply rail for the full 1.98 V to 3.8 V operating range and place the required bypass capacitors close to the MCU power pins. For a typical 3.3 V design, verify that every connected sensor, transceiver, and display interface remains compatible with the selected MCU operating point. Use the manufacturer's power-pin and decoupling guidance for the exact package rather than relying on generic bulk-capacitor values.

Assign programming, reset, clock, and debug signals only after checking the complete 64-pin QFP drawing and alternate-function table. Keep sensitive analog inputs away from switching nodes and high-current return paths, and provide short ground returns. Because the target is a leaded 64-pin TQFP, inspect lead pitch, pad dimensions, paste apertures, and courtyard clearance during footprint review before PCB fabrication.

The 48 MHz Cortex-M3 core can consume more current than a low-frequency MCU, although total dissipation depends on utilization and active peripherals. Use the silicon Labs EFM32LG datasheet power data to estimate average consumption and junction conditions. Keep exposed copper available for thermal spreading, and do not infer thermal performance from the package type alone when the final operating environment and enclosure restrict heat dissipation.

Do not substitute a related EFM32 part solely because the flash size and package count match. Confirm the complete pin table, suffix-specific temperature grade, clock limit, peripheral set, qualification requirements, and software-support status. In particular, the EFM32G842F64-QFP64 candidate is listed at 32 MHz rather than the target's 48 MHz, so timing-dependent designs require careful review before migration.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The EFM32LG842F64 listing identifies RoHS-compliant and lead-free construction. Reach, halogen-free, and conflict-minerals status are unknown. AEC-Q100 qualification is not applicable because this ordering code is not identified as an automotive-qualified variant.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

EFM32LG842F64-QFP64 datasheet EFM32LG842F64-QFP64 pinout EFM32LG842F64-QFP64 datasheet pdf EFM32LG842F64-QFP64 equivalent EFM32LG842F64-QFP64 replacement EFM32LG842F64-QFP64 price EFM32LG842F64-QFP64 stock Silicon Labs EFM32LG842F64-QFP64 EFM32LG842F64-QFP64 vs EFM32LG842F64G-E-QFP64 EFM32LG842F64-QFP64 64-pin TQFP EFM32LG842F64-QFP64 48MHz Cortex-M3 EFM32LG842F64-QFP64 low power LCD EFM32LG842F64-QFP64 programming EFM32LG842F64-QFP64 footprint

関連部品&用語

Silicon Labs EFM32LG842F64-QFP64 EFM32LG842F64G-E-QFP64 EFM32LG842F128G-E-QFP64 EFM32G842F64-QFP64 EFM32LG232F64G-F-QFP64R ARM Cortex-M3 microcontroller embedded microcontroller 32-bit RISC processor Leopard Gecko Gecko EFM32LG semiconductor system-on-chip 64-pin TQFP TQFP package family surface-mount package 64 KB flash memory 32 KB RAM 8x18 LCD controller AES hardware accelerator Memory Protection Unit Wake-Up Interrupt Controller Stop mode RoHS
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示