EFM32TG222F8-D-QFP48R - 32MHz ARM MCU | Silicon Labs (Tape & Reel)
Référence : EFM32TG222F8-D-QFP48R ✓ ActifEFM32TG222F8-D-QFP48R Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The ARM Cortex-M3 belongs to the MCU hierarchy: microcontroller -> embedded processor -> programmable semiconductor. Tiny Gecko MCUs combine conventional processing performance with low-power operating techniques, energy-saving modes, and fast wake-up behavior for battery-powered and energy-conscious products.
The EFM32TG222F8-D-QFP48R provides 8 KB of Flash for firmware, 2 KB of RAM for working data, and two 16-bit timers alongside 37 digital I/O pins. These resources suit compact control products that require mixed signal acquisition, timing, serial communication, and general-purpose digital control without using a larger microcontroller package.
Its architecture is based on a 32-bit ARM Cortex-M3 core capable of running at up to 32 MHz. The low-power platform supports energy-sensitive designs by combining sleep-oriented operating modes with fast wake-up capability. Exact current consumption, wake-up timing, and peripheral performance values should be selected from the device datasheet for the specific operating mode and clock configuration.
Typical uses include compact industrial sensors, low-power wireless end nodes, building-control modules, battery-operated instruments, and connected accessories. The 48-pin TQFP provides enough I/O for external sensing interfaces, indicator control, communications, programming, and supporting power circuitry while remaining suitable for conventional PCB assembly.
When planning the PCB, reserve the pins for power, ground, programming, reset, and decoupling according to the manufacturer pin-description table. Use short return paths and place the required input and bypass capacitors close to their associated supply pins. Firmware memory is limited, so partition the 8 KB Flash for boot code, application code, and configuration data with margin for future updates.
This product page combines the manufacturer specifications, package details, verified sourcing information, drop-in candidate analysis, application guidance, and practical design notes into a focused engineering reference for evaluating the EFM32TG222F8-D-QFP48R in low-power embedded systems.
Alternatives de remplacement direct pour EFM32TG222F8-D-QFP48R — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EFM32TG222F8-D-QFP48R (même facteur de forme et même empreinte) — différant par Digital I/O Pins, Package, Series.
EFM32TG222F8-QFP48
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →EFM32TG222F32-QFP48
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32TG222F32-D-QFP48
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32ZG222F32-QFP48T
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32TG222F8-D-QFP48R Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Processor Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Word Length | 32 bit |
| Flash Memory | 8 KB (8K x 8) |
| RAM Memory | 2 KB |
| Digital I/O Pins | 37 pins |
| Timers | 2 x 16-bit timers |
| Tension d'alimentation de fonctionnement | 1.98 V to 3.8 V |
| Boîtier | 48-pin TQFP (7 x 7 mm) |
| Type de montage | Surface mount |
| Low-Power Features | Energy-saving modes and fast wake-up |
Guide de configuration des broches du EFM32TG222F8-D-QFP48R 48-pin tqfp (7 x 7 mm)
Configuration des broches du EFM32TG222F8-D-QFP48R (boîtier 48-pin tqfp (7 x 7 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EFM32TG222F8-D-QFP48R.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EFM32TG222F8-D-QFP48R convient pour 6 applications: Low-Power Wireless Sensor Node, Industrial Sensor Interface, Battery-Operated Measurement Instrument, Building Control Module, Compact Data Acquisition Controller, Connected Accessory Controller.
Low-Power Wireless Sensor Node
The EFM32TG222F8-D-QFP48R fits compact wireless sensor nodes that periodically wake to measure a physical quantity, process the result, and transmit a short data packet. Its ARM Cortex-M3 core can operate up to 32 MHz, while the Tiny Gecko low-power platform provides energy-saving modes and fast wake-up behavior. The 37 digital I/O pins can support a sensor interface, status indicators, and a radio-control line. With 8 KB of Flash and 2 KB of RAM, firmware must remain compact, so drivers and protocol stacks should be selected for their memory footprint. Validate the final sleep current and radio duty cycle on the assembled board because MCU consumption can be dominated by sensor and transceiver leakage.
Recommandé
Industrial Sensor Interface
The EFM32TG222F8-D-QFP48R is suitable for industrial sensor interfaces that need digital control, timing, and compact embedded logic without a large processor module. Its two 16-bit timers support periodic sampling or output timing, while the 32 MHz Cortex-M3 core can execute filtering and threshold logic. The 37 digital I/O pins leave useful capacity for switch inputs, alarm outputs, and communication peripherals. A 1.98 V to 3.8 V operating range allows integration with low-voltage sensor and transceiver circuitry. Design the analog front end separately from fast digital return paths, and confirm the device-specific ADC characteristics before assigning precision analog measurements to this MCU.
Recommandé
Battery-Operated Measurement Instrument
The EFM32TG222F8-D-QFP48R can serve as the control core of a compact battery-operated measurement instrument where fast wake-up and low-power operation are central design goals. Its 32 MHz ARM Cortex-M3 core provides enough performance for control logic, menu handling, and moderate data processing, while 2 KB of RAM supports short working buffers. The two 16-bit timers can organize sampling and display-update intervals, and the 37 I/O pins can connect controls, indicators, and external interface circuits. Because the device has only 8 KB of Flash, store large calibration tables externally or select a higher-memory Tiny Gecko variant when the application requires extensive logs, networking stacks, or update code.
Recommandé
Building Control Module
The EFM32TG222F8-D-QFP48R is appropriate for distributed building-control modules that supervise switches, inputs, outputs, and local communication links. Its 48-pin TQFP provides 37 digital I/O pins for logic-level sensing and actuator control, while two 16-bit timers can support periodic housekeeping or timing functions. The 32 MHz Cortex-M3 processor allows local decision-making without continuous network activity, and the Tiny Gecko energy-saving modes help reduce consumption in lightly used rooms. Keep mains-side isolation and switching circuitry outside the MCU area, route low-level signals away from high-current edges, and confirm that the selected communication interface fits within the available 8 KB Flash and 2 KB RAM budget.
Recommandé
Compact Data Acquisition Controller
The EFM32TG222F8-D-QFP48R can act as a compact data-acquisition controller for applications requiring sampled inputs, local filtering, and control outputs. Two 16-bit timers provide a basis for deterministic sampling intervals, and the 32 MHz Cortex-M3 core can execute control algorithms without a separate processor. The 37 available digital I/O pins support sensor enables, data-ready signals, status LEDs, and external converters. ADC resolution and analog-channel characteristics must be confirmed in the device documentation for precision measurements, while the 8 KB Flash limit favors short acquisition code and compact calibration constants. If buffering large sample blocks, adding external memory or moving to a 32 KB Flash variant may be necessary.
Recommandé
Connected Accessory Controller
The EFM32TG222F8-D-QFP48R works well as the local controller in a compact connected accessory that combines user inputs, indicators, and a communications module. The 37 digital I/O pins can handle buttons, LEDs, alarm lines, and peripheral-control signals, while the 32 MHz ARM Cortex-M3 core handles command processing and interface state management. The device operates from 1.98 V to 3.8 V, which can simplify integration with low-voltage radio and sensor components. Energy-saving modes are valuable when the accessory spends most of its time idle, but the complete power budget should include the communication module. Review firmware size carefully because 8 KB of Flash limits support for large protocol stacks and graphical user interfaces.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EFM32TG222F8-D-QFP48R — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EFM32TG222F8-QFP48 | EFM32TG222F32-QFP48 | EFM32TG222F32-D-QFP48 | EFM32ZG222F32-QFP48T |
|---|---|---|---|---|---|
| Package | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Product Family | EFM32 Tiny Gecko | EFM32 Tiny Gecko | EFM32 Tiny Gecko | EFM32 Tiny Gecko | EFM32 Zen |
| Flash Memory | 8 KB | 8 KB | 32 KB | 32 KB | 32 KB |
| RAM Memory | 2 KB | 2 KB | 4 KB | 4 KB | 4 KB |
Principaux différenciateurs
- Lower on-board memory footprint for constrained firmware (vs EFM32TG222F32-QFP48)
- Same Tiny Gecko software platform as the closest memory upgrade (vs EFM32TG222F32-D-QFP48)
- 37 digital I/O pins in a compact 7 x 7 mm TQFP (vs EFM32TG222F8-QFP48)
- Compact memory option for energy-sensitive embedded designs (vs EFM32ZG222F32-QFP48T)
Notes de conception
Design the supply network for the 1.98 V to 3.8 V operating range and place the manufacturer-specified bypass capacitors directly beside the MCU power pins. Keep supply and ground connections short, provide a low-impedance return plane, and separate quiet analog or radio nodes from switching-current paths. Verify startup behavior, brownout margins, and the voltage required by every attached peripheral rather than assuming the nominal 3.3 V condition.
Use the manufacturer pin-description table to assign all power, ground, reset, programming, and peripheral signals before routing. Maintain a continuous ground reference beneath the TQFP and place input, output, and bypass capacitors on the same board side as their associated pins. Program and debug access should remain convenient and should not require long traces that couple switching noise into sensitive measurement circuits.
Do not select firmware without checking the 8 KB Flash and 2 KB RAM limits. Include bootloader, drivers, application code, calibration values, and update overhead in the memory budget rather than measuring only the main application. The 32-bit Cortex-M3 core and 32 MHz clock can also create fast edges, so observe debug symbols for overshoot, ringing, and unintended current activity instead of evaluating only static supply voltage.
Although the 48-pin TQFP provides useful copper connectivity, thermal performance depends on the PCB copper area, airflow, adjacent heat sources, and switching activity. Follow the manufacturer's layout guidance for exposed thermal pathways where applicable and avoid enclosing the MCU in a tight, poorly ventilated enclosure. Validate the hottest operating corner with thermocouples or thermal sensors because the package alone does not determine the junction temperature.
Informations de conformité
Compliance status must be confirmed from the manufacturer product documentation or declarations for the exact ordering designation.