Silicon Labs

EFM32TG222F8-D-QFP48R - 32MHz ARM MCU | Silicon Labs (Tape & Reel)

料号: EFM32TG222F8-D-QFP48R ✓ 量产中
1.98 V to 3.8 V Vdss 48-pin TQFP (7 x 7 mm) Package 32 MHz Speed 8 KB (8K x 8) Memory
最小起订量: 1 |

EFM32TG222F8-D-QFP48R 概述

Silicon Labs EFM32TG222F8-D-QFP48R is an ARM Cortex-M3 32-bit microcontroller operating up to 32 MHz, with 8 KB of Flash, 2 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 x 7 mm. Its operating supply range is 1.98 V to 3.8 V.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The ARM Cortex-M3 belongs to the MCU hierarchy: microcontroller -> embedded processor -> programmable semiconductor. Tiny Gecko MCUs combine conventional processing performance with low-power operating techniques, energy-saving modes, and fast wake-up behavior for battery-powered and energy-conscious products.

The EFM32TG222F8-D-QFP48R provides 8 KB of Flash for firmware, 2 KB of RAM for working data, and two 16-bit timers alongside 37 digital I/O pins. These resources suit compact control products that require mixed signal acquisition, timing, serial communication, and general-purpose digital control without using a larger microcontroller package.

Its architecture is based on a 32-bit ARM Cortex-M3 core capable of running at up to 32 MHz. The low-power platform supports energy-sensitive designs by combining sleep-oriented operating modes with fast wake-up capability. Exact current consumption, wake-up timing, and peripheral performance values should be selected from the device datasheet for the specific operating mode and clock configuration.

Typical uses include compact industrial sensors, low-power wireless end nodes, building-control modules, battery-operated instruments, and connected accessories. The 48-pin TQFP provides enough I/O for external sensing interfaces, indicator control, communications, programming, and supporting power circuitry while remaining suitable for conventional PCB assembly.

When planning the PCB, reserve the pins for power, ground, programming, reset, and decoupling according to the manufacturer pin-description table. Use short return paths and place the required input and bypass capacitors close to their associated supply pins. Firmware memory is limited, so partition the 8 KB Flash for boot code, application code, and configuration data with margin for future updates.

This product page combines the manufacturer specifications, package details, verified sourcing information, drop-in candidate analysis, application guidance, and practical design notes into a focused engineering reference for evaluating the EFM32TG222F8-D-QFP48R in low-power embedded systems.

直接替换替代料: EFM32TG222F8-D-QFP48R ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: EFM32TG222F8-D-QFP48R (相同外形与封装尺寸) ——差异在于 Digital I/O Pins, Package, Series.

Silicon Labs
Digital I/O Pins: 37
Package: 48-TQFP (7 x 7 mm)
Series: Tiny Gecko
对比 EFM32TG222F8-D-QFP48R →

EFM32TG222F8-QFP48

✅ 直接替换
Silicon Labs
📦 48-TQFP (7 x 7 mm)
32-bit ARM Cortex-M3 microcontroller · Tiny Gecko · 32 MHz · 8 kB (8K x 8) · 2 kB · 37 · 2 x 16-bit timers · ARM Cortex-M3

联系询价

查看数据手册 →

EFM32TG222F32-QFP48

✅ 直接替换
📦 48-TQFP (7 x 7 mm)
Flash is 32 KB versus 8 KB, a 300% increase, and RAM is 4 KB versus 2 KB, a 100% increase; core speed and package match

📋 参考替代料(不在目录中)

EFM32TG222F32-D-QFP48

✅ 直接替换
📦 48-TQFP (7 x 7 mm)
Flash is 32 KB versus 8 KB, a 300% increase, and RAM is 4 KB versus 2 KB, a 100% increase; the -D ordering designation matches

📋 参考替代料(不在目录中)

EFM32ZG222F32-QFP48T

✅ 直接替换
📦 48-TQFP (7 x 7 mm)
Flash is 32 KB versus 8 KB, a 300% increase, and RAM is 4 KB versus 2 KB, a 100% increase; it uses the newer EFM32 Zen family

📋 参考替代料(不在目录中)

EFM32TG222F8-D-QFP48R 最大额定值与电气特性

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Tiny Gecko
Processor Core ARM Cortex-M3
Maximum CPU Frequency 32 MHz
Word Length 32 bit
Flash Memory 8 KB (8K x 8)
RAM Memory 2 KB
Digital I/O Pins 37 pins
Timers 2 x 16-bit timers
工作电源电压 1.98 V to 3.8 V
封装 48-pin TQFP (7 x 7 mm)
安装类型 Surface mount
Low-Power Features Energy-saving modes and fast wake-up

EFM32TG222F8-D-QFP48R 48-pin tqfp (7 x 7 mm) 引脚配置指南

EFM32TG222F8-D-QFP48R(48-pin tqfp (7 x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

EFM32TG222F8-D-QFP48R 的 48-pin tqfp (7 x 7 mm) 封装引脚图

暂无详细引脚数据: EFM32TG222F8-D-QFP48R.

请参阅 数据手册 以查看完整引脚配置。

典型应用

EFM32TG222F8-D-QFP48R 适用于 6 应用s: Low-Power Wireless Sensor Node, Industrial Sensor Interface, Battery-Operated Measurement Instrument, Building Control Module, Compact Data Acquisition Controller, Connected Accessory Controller.

🧩

Low-Power Wireless Sensor Node

The EFM32TG222F8-D-QFP48R fits compact wireless sensor nodes that periodically wake to measure a physical quantity, process the result, and transmit a short data packet. Its ARM Cortex-M3 core can operate up to 32 MHz, while the Tiny Gecko low-power platform provides energy-saving modes and fast wake-up behavior. The 37 digital I/O pins can support a sensor interface, status indicators, and a radio-control line. With 8 KB of Flash and 2 KB of RAM, firmware must remain compact, so drivers and protocol stacks should be selected for their memory footprint. Validate the final sleep current and radio duty cycle on the assembled board because MCU consumption can be dominated by sensor and transceiver leakage.

🏭

Industrial Sensor Interface

The EFM32TG222F8-D-QFP48R is suitable for industrial sensor interfaces that need digital control, timing, and compact embedded logic without a large processor module. Its two 16-bit timers support periodic sampling or output timing, while the 32 MHz Cortex-M3 core can execute filtering and threshold logic. The 37 digital I/O pins leave useful capacity for switch inputs, alarm outputs, and communication peripherals. A 1.98 V to 3.8 V operating range allows integration with low-voltage sensor and transceiver circuitry. Design the analog front end separately from fast digital return paths, and confirm the device-specific ADC characteristics before assigning precision analog measurements to this MCU.

📱

Battery-Operated Measurement Instrument

The EFM32TG222F8-D-QFP48R can serve as the control core of a compact battery-operated measurement instrument where fast wake-up and low-power operation are central design goals. Its 32 MHz ARM Cortex-M3 core provides enough performance for control logic, menu handling, and moderate data processing, while 2 KB of RAM supports short working buffers. The two 16-bit timers can organize sampling and display-update intervals, and the 37 I/O pins can connect controls, indicators, and external interface circuits. Because the device has only 8 KB of Flash, store large calibration tables externally or select a higher-memory Tiny Gecko variant when the application requires extensive logs, networking stacks, or update code.

🏠

Building Control Module

The EFM32TG222F8-D-QFP48R is appropriate for distributed building-control modules that supervise switches, inputs, outputs, and local communication links. Its 48-pin TQFP provides 37 digital I/O pins for logic-level sensing and actuator control, while two 16-bit timers can support periodic housekeeping or timing functions. The 32 MHz Cortex-M3 processor allows local decision-making without continuous network activity, and the Tiny Gecko energy-saving modes help reduce consumption in lightly used rooms. Keep mains-side isolation and switching circuitry outside the MCU area, route low-level signals away from high-current edges, and confirm that the selected communication interface fits within the available 8 KB Flash and 2 KB RAM budget.

📺

Compact Data Acquisition Controller

The EFM32TG222F8-D-QFP48R can act as a compact data-acquisition controller for applications requiring sampled inputs, local filtering, and control outputs. Two 16-bit timers provide a basis for deterministic sampling intervals, and the 32 MHz Cortex-M3 core can execute control algorithms without a separate processor. The 37 available digital I/O pins support sensor enables, data-ready signals, status LEDs, and external converters. ADC resolution and analog-channel characteristics must be confirmed in the device documentation for precision measurements, while the 8 KB Flash limit favors short acquisition code and compact calibration constants. If buffering large sample blocks, adding external memory or moving to a 32 KB Flash variant may be necessary.

🌐

Connected Accessory Controller

The EFM32TG222F8-D-QFP48R works well as the local controller in a compact connected accessory that combines user inputs, indicators, and a communications module. The 37 digital I/O pins can handle buttons, LEDs, alarm lines, and peripheral-control signals, while the 32 MHz ARM Cortex-M3 core handles command processing and interface state management. The device operates from 1.98 V to 3.8 V, which can simplify integration with low-voltage radio and sensor components. Energy-saving modes are valuable when the accessory spends most of its time idle, but the complete power budget should include the communication module. Review firmware size carefully because 8 KB of Flash limits support for large protocol stacks and graphical user interfaces.

推荐产品汇总

EFM32TG222F8-QFP48 Silicon Labs 用于: Low-Power Wireless Sensor Node, Industrial Sensor Interface, Battery-Operated Measurement Instrument, Building Control Module EFM32TG222F32-QFP48 Higher-memory upgrade for larger firmware 用于: Low-Power Wireless Sensor Node, Battery-Operated Measurement Instrument, Connected Accessory Controller EFM32TG222F32-D-QFP48 Memory-expanded production option 用于: Industrial Sensor Interface, Compact Data Acquisition Controller EFM32ZG222F32-QFP48T Newer-family option with greater memory 用于: Building Control Module EFM32TG222F8-D-QFP48R Silicon Labs 用于: Compact Data Acquisition Controller, Connected Accessory Controller
What are the key specifications of EFM32TG222F8-D-QFP48R that engineers should know?
The EFM32TG222F8-D-QFP48R is a 32-bit ARM Cortex-M3 microcontroller with a maximum CPU frequency of 32 MHz, 8 KB of Flash, 2 KB of RAM, and 37 digital I/O pins. According to the Silicon Labs product page, it also includes two 16-bit timers and operates from a 1.98 V to 3.8 V supply. The device is packaged in a 48-pin TQFP measuring 7 x 7 mm.
Where can I download the EFM32TG222F8-D-QFP48R datasheet PDF?
The EFM32TG222F8-D-QFP48R datasheet can be obtained through the Silicon Labs device page or the linked manufacturer PDF. According to Silicon Labs, the document contains the Tiny Gecko electrical, timing, package, and pin information needed for hardware and firmware development. Use the manufacturer's PDF as the controlling reference for programming, reset, supply decoupling, exposed functions, and low-power-mode requirements.
Where can I find the EFM32TG222F8-D-QFP48R pinout?
The EFM32TG222F8-D-QFP48R pinout is documented in the manufacturer datasheet and device-page package documentation for the 48-pin TQFP. The package is a 7 x 7 mm surface-mount TQFP with 37 digital I/O pins. Use the pin-description table to assign power, ground, programming, reset, and peripheral signals before laying out the board.
Where to buy EFM32TG222F8-D-QFP48R online?
The EFM32TG222F8-D-QFP48R can be requested through the Request a Quote form on this page, where the exact suffix and package configuration can be confirmed with the buyer. The manufacturer identifies the part as EFM32TG222F8-QFP48, while the -D ordering designation is retained in the listed MPN. Confirm stock, lot traceability, and delivery terms during quotation.
What is the price of EFM32TG222F8-D-QFP48R?
The current commercial price for EFM32TG222F8-D-QFP48R should be obtained through the Request a Quote form on this page. This keeps the quotation tied to the exact -D suffix, 48-pin TQFP package, required quantity, and delivery conditions. Inventory and commercial terms can change, so use the form rather than relying on a historical or family-level starting price.
What is the lead time for EFM32TG222F8-D-QFP48R?
The current lead time for EFM32TG222F8-D-QFP48R should be confirmed through the Request a Quote form on this page. Provide the required quantity, target date, and packaging preference so the order can be matched to the exact -D ordering designation. For production planning, also request lot availability, date-code information, and any manufacturer lead-time constraints.
Is EFM32TG222F8-D-QFP48R in stock?
Stock for the exact EFM32TG222F8-D-QFP48R ordering designation should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies the device as EFM32TG222F8-QFP48, and current channel listings show the family available, but that does not by itself confirm the -D variant is immediately available. Include your required quantity and schedule in the request.
EFM32TG222F8-D-QFP48R vs EFM32TG222F32-QFP48 - which is better for a compact controller?
EFM32TG222F8-D-QFP48R is the better choice when 8 KB of Flash and 2 KB of RAM are sufficient, while EFM32TG222F32-QFP48 provides more program and data memory. According to the Silicon Labs product pages, both use an ARM Cortex-M3 core at up to 32 MHz and a 48-pin 7 x 7 mm TQFP, but the F32 version has 32 KB of Flash and 4 KB of RAM.
What is the difference between EFM32TG222F8-D-QFP48R and EFM32TG222F8-QFP48?
The EFM32TG222F8-D-QFP48R and EFM32TG222F8-QFP48 both identify a Tiny Gecko MCU with an ARM Cortex-M3 core, up to 32 MHz operation, 8 KB of Flash, 2 KB of RAM, and a 48-pin TQFP package. The manufacturer page lists the non-D ordering designation, while this product uses the -D suffix. Confirm the commercial and environmental ordering meaning in the manufacturer documentation before substitution.
When should I choose EFM32TG222F8-D-QFP48R over EFM32TG222F32-D-QFP48?
Choose EFM32TG222F8-D-QFP48R when its 8 KB of Flash and 2 KB of RAM are sufficient for the application and a smaller firmware footprint is desirable. Choose EFM32TG222F32-D-QFP48 when the design needs additional firmware or working memory. Both retain the 32 MHz Cortex-M3 architecture and 48-pin TQFP arrangement, but the F32 part provides 300% more Flash and 100% more RAM.
Is EFM32TG222F8-D-QFP48R suitable for a low-power sensor node?
The EFM32TG222F8-D-QFP48R is suitable for many low-power sensor nodes because Silicon Labs describes the Tiny Gecko platform as incorporating energy-saving modes, fast wake-up times, and low-energy techniques. Its 32 MHz Cortex-M3 core also supports responsive sensor processing. Final suitability depends on the required sampling rate, duty cycle, radio or communications load, and measured sleep current for the complete design.
What can replace EFM32TG222F8-D-QFP48R?
EFM32TG222F8-QFP48 is the closest same-package ordering candidate because it matches the ARM Cortex-M3 core, 32 MHz maximum frequency, 8 KB of Flash, 2 KB of RAM, 37 I/O pins, and 48-pin TQFP configuration. EFM32TG222F32 variants remain pin-compatible at a basic package level but increase Flash by 300% and RAM by 100%, so they require firmware and memory-budget review before replacement.
Is EFM32TG222F8-D-QFP48R the same as EFM32ZG222F32-QFP48T?
No. The EFM32TG222F8-D-QFP48R is a Tiny Gecko MCU with 8 KB of Flash and 2 KB of RAM, while EFM32ZG222F32-QFP48T belongs to the EFM32 Zen family and is listed with 32 KB of Flash. Although both use a 48-pin TQFP arrangement, device initialization, peripheral resources, firmware, and exact pin-function compatibility must be verified before treating the Zen part as a drop-in replacement.
What is the best cross-brand replacement for EFM32TG222F8-D-QFP48R?
No cross-brand drop-in replacement is established for the EFM32TG222F8-D-QFP48R because the available cross-reference results do not identify a competing MCU with verified package, pin, clock, memory, and peripheral compatibility. A cross-brand substitution would require a complete pin-function and software-support review rather than relying on the common 48-pin TQFP outline. Use the Request a Quote form when sourcing the original manufacturer-specified device.
How should power and decoupling be designed for EFM32TG222F8-D-QFP48R?
Design the EFM32TG222F8-D-QFP48R around its 1.98 V to 3.8 V operating supply range. Place the manufacturer-required bypass capacitors directly beside the associated power and ground pins, keep supply and return traces short, and provide clean connections for programming and reset. Treat the MCU as a digital load that may have fast switching edges, and keep sensitive analog or radio circuitry away from high-current return paths.

工程参考数据: EFM32TG222F8-D-QFP48R ——对比、设计指导和合规信息。

选型指南

Choose the EFM32TG222F8-D-QFP48R when the application can fit within 8 KB of Flash and 2 KB of RAM and benefits from a compact 48-pin TQFP with 37 digital I/O pins. It is particularly appropriate for low-power sensors, building-control modules, and compact instruments where the Tiny Gecko low-power platform and fast wake-up behavior are central requirements. EFM32TG222F8-QFP48 is the closest catalog alternative because its core, memory, I/O count, and package match, subject to confirmation of the -D ordering distinction. EFM32TG222F32-QFP48 and EFM32TG222F32-D-QFP48 are sensible upgrades when additional firmware and RAM are needed, but they increase Flash by 300% and RAM by 100%. EFM32ZG222F32-QFP48T moves to the newer Zen family and should be selected only after its peripheral set, initialization process, and pin functions have been checked against the Tiny Gecko design.

与替代料对比

参数 本产品 EFM32TG222F8-QFP48 EFM32TG222F32-QFP48 EFM32TG222F32-D-QFP48 EFM32ZG222F32-QFP48T
Package 48-TQFP (7 x 7 mm) 48-TQFP (7 x 7 mm) 48-TQFP (7 x 7 mm) 48-TQFP (7 x 7 mm) 48-TQFP (7 x 7 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Product Family EFM32 Tiny Gecko EFM32 Tiny Gecko EFM32 Tiny Gecko EFM32 Tiny Gecko EFM32 Zen
Flash Memory 8 KB 8 KB 32 KB 32 KB 32 KB
RAM Memory 2 KB 2 KB 4 KB 4 KB 4 KB

关键差异点

  • Lower on-board memory footprint for constrained firmware (对比 EFM32TG222F32-QFP48)
  • Same Tiny Gecko software platform as the closest memory upgrade (对比 EFM32TG222F32-D-QFP48)
  • 37 digital I/O pins in a compact 7 x 7 mm TQFP (对比 EFM32TG222F8-QFP48)
  • Compact memory option for energy-sensitive embedded designs (对比 EFM32ZG222F32-QFP48T)

设计说明

Design the supply network for the 1.98 V to 3.8 V operating range and place the manufacturer-specified bypass capacitors directly beside the MCU power pins. Keep supply and ground connections short, provide a low-impedance return plane, and separate quiet analog or radio nodes from switching-current paths. Verify startup behavior, brownout margins, and the voltage required by every attached peripheral rather than assuming the nominal 3.3 V condition.

Use the manufacturer pin-description table to assign all power, ground, reset, programming, and peripheral signals before routing. Maintain a continuous ground reference beneath the TQFP and place input, output, and bypass capacitors on the same board side as their associated pins. Program and debug access should remain convenient and should not require long traces that couple switching noise into sensitive measurement circuits.

Do not select firmware without checking the 8 KB Flash and 2 KB RAM limits. Include bootloader, drivers, application code, calibration values, and update overhead in the memory budget rather than measuring only the main application. The 32-bit Cortex-M3 core and 32 MHz clock can also create fast edges, so observe debug symbols for overshoot, ringing, and unintended current activity instead of evaluating only static supply voltage.

Although the 48-pin TQFP provides useful copper connectivity, thermal performance depends on the PCB copper area, airflow, adjacent heat sources, and switching activity. Follow the manufacturer's layout guidance for exposed thermal pathways where applicable and avoid enclosing the MCU in a tight, poorly ventilated enclosure. Validate the hottest operating corner with thermocouples or thermal sensors because the package alone does not determine the junction temperature.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance status must be confirmed from the manufacturer product documentation or declarations for the exact ordering designation.

相关搜索

EFM32TG222F8-D-QFP48R datasheet EFM32TG222F8-D-QFP48R specifications EFM32TG222F8-D-QFP48R pinout EFM32TG222F8-D-QFP48R datasheet pdf EFM32TG222F8-D-QFP48R equivalent EFM32TG222F8-D-QFP48R replacement EFM32TG222F8-D-QFP48R cross reference EFM32TG222F8-D-QFP48R footprint EFM32TG222F8-D-QFP48R price EFM32TG222F8-D-QFP48R stock Silicon Labs EFM32TG222F8-D-QFP48R EFM32TG222F8-D-QFP48R 32MHz Cortex-M3 EFM32TG222F8-D-QFP48R 48-TQFP pinout EFM32TG222F8-D-QFP48R low power application EFM32TG222F8-D-QFP48R vs EFM32TG222F32-D-QFP48

相关元器件 & 术语

Silicon Labs EFM32TG222F8-D-QFP48R EFM32TG222F8-QFP48 EFM32TG222F32-QFP48 EFM32TG222F32-D-QFP48 EFM32ZG222F32-QFP48T ARM Cortex-M3 Tiny Gecko EFM32 Zen microcontroller MCU embedded processor programmable semiconductor 32-bit microcontroller low-power MCU Flash memory RAM digital I/O 16-bit timer 48-TQFP TQFP package surface mount SMD fast wake-up energy-saving mode
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情