EFM32WG840F64-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs
Référence : EFM32WG840F64-QFN64 ✓ ActifEFM32WG840F64-QFN64 Présentation
An ARM Cortex-M4F microcontroller is a 32-bit embedded processor that combines a general-purpose instruction set with DSP acceleration and a floating-point unit. The Cortex-M4F belongs to the wider microcontroller hierarchy, alongside ARM Cortex-M0, Cortex-M0+, Cortex-M3, and Cortex-M7 processors. Silicon Labs places the EFM32WG840F64-QFN64 within the EFM32 Wonder Gecko family, using low-energy operating techniques and fast wake-up behavior for battery-powered and energy-conscious products.
The device runs at 48 MHz and includes 64 KB of flash memory for firmware and constants. Its Cortex-M4F architecture supports the DSP instruction set and hardware floating-point operations, which improve performance for digital filtering, control algorithms, audio processing, and other mixed integer-and-float workloads. The integrated AES capability supports encrypted data transfer or storage without requiring a separate cryptographic accelerator.
The microcontroller is designed around a low-power platform featuring energy-saving modes and rapid wake-up capability. These characteristics are particularly useful in portable instruments, sensor nodes, industrial monitoring equipment, and connected products that spend most of their operating life in a low-energy state. The manufacturer also describes backup-battery operation for maintaining system operation when the main power source drains.
Typical uses include low-power sensor nodes, compact industrial controllers, medical monitoring modules, connected security devices, energy meters, and control systems with a small display interface. The LCD connection and AES support make the device especially relevant to portable products that combine a human-readable display with protected data. Its 64-QFN package also supports space-constrained board layouts while exposing a substantial peripheral set through 64 contacts.
Designers should verify the exact pin assignments, exposed-pad connection, decoupling requirements, and supported operating-temperature grade against the manufacturer datasheet before layout release. Because the device combines a 48 MHz processor with external memory, display, and radio interfaces, careful decoupling, controlled return paths, and signal-integrity layout are important. The QFN thermal pad should be connected according to the package and board-stackup guidance in the datasheet.
This product record combines the key device characteristics with practical application guidance, pinout considerations, and verified drop-in alternatives. It is intended to help engineers assess the Cortex-M4F, 64 KB flash, 48 MHz performance, low-power operation, AES support, and 64-QFN footprint before committing the part to an embedded design.
Alternatives de remplacement direct pour EFM32WG840F64-QFN64 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
EFM32WG840F64-B-QFN64
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32WG840F64-QFN64T
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32WG840F64-QFN64 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Product Family | EFM32 Wonder Gecko |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Processor Architecture | ARM Cortex-M4F |
| Instruction Width | 32-bit |
| DSP Support | Full DSP instruction set |
| Floating-Point Unit | Hardware single-precision floating-point unit |
| Tension d'alimentation de fonctionnement | 1.98 V to 3.8 V |
| Boîtier | 64-QFN, 9 x 9 mm |
| Type de montage | Surface mount |
| Security Feature | AES hardware accelerator |
| Display Support | LCD controller |
| Backup Power Feature | Operation from a backup battery when main power drains |
| Low-Power Features | Energy-saving modes and fast wake-up behavior |
Guide de configuration des broches du EFM32WG840F64-QFN64 64-qfn, 9 x 9 mm
Configuration des broches du EFM32WG840F64-QFN64 (boîtier 64-qfn, 9 x 9 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EFM32WG840F64-QFN64.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EFM32WG840F64-QFN64 convient pour 6 applications: Battery-Powered Sensor Node, Portable Medical Monitoring Device, Connected Security and Access Device, Compact Industrial Control Module, Smart Meter and Energy Display, Audio and Digital Signal Processing.
Battery-Powered Sensor Node
The EFM32WG840F64-QFN64 fits battery-powered sensor nodes because its EFM32 Wonder Gecko platform supports energy-saving modes and fast wake-up behavior. The 48 MHz Cortex-M4F core can perform filtering, scaling, and control calculations locally, including the full DSP instruction set and hardware floating-point unit. A designer can therefore sample sensors, apply compensation, and update a local data store without offloading every operation to a higher-power processor. The 1.98 V to 3.8 V operating range suits low-voltage systems, while AES acceleration can protect stored or transmitted measurements. Final battery-life optimization depends on the selected sleep mode, display activity, sensor duty cycle, and wake-up source.
Recommandé
Portable Medical Monitoring Device
The EFM32WG840F64-QFN64 is appropriate for compact medical monitoring products that combine sensor acquisition with a local display. Its Cortex-M4F processor provides 32-bit execution at up to 48 MHz plus DSP and hardware floating-point instructions for filtering and signal analysis, while the LCD controller supports a readable user interface. The 64 KB of flash accommodates firmware, calibration tables, and constants, and AES hardware acceleration can protect device data transferred to a host or accessory. Low-power operating modes are valuable in devices that operate for long periods between maintenance cycles, although final medical-device suitability must be established through the manufacturer’s quality, regulatory, and qualification documentation.
Recommandé
Connected Security and Access Device
The EFM32WG840F64-QFN64 suits connected access-control and security devices that require encrypted communication in a compact assembly. Its AES hardware accelerator offloads encryption and decryption tasks from the Cortex-M4F core, allowing the processor to continue handling user input, display updates, and device management. The 48 MHz operating speed and DSP instruction set support local signal processing, while low-power modes and fast wake-up behavior help limit consumption during idle periods. The 64-QFN 9 x 9 mm package reduces board area compared with larger leaded devices. Designers must still verify the exact peripheral mapping, secure-boot requirements, key-storage method, and communication-interface timing before schematic release.
Recommandé
Compact Industrial Control Module
The EFM32WG840F64-QFN64 can serve as the control core of a compact industrial module that performs local sensing, signal conditioning, and actuator coordination. The Cortex-M4F’s 48 MHz performance, full DSP instruction set, and hardware floating-point unit improve responsiveness for digital filters and control algorithms. With 64 KB of flash, firmware can implement a dedicated control loop and communication stack, while fast wake-up behavior supports designs that remain mostly idle. The 1.98 V to 3.8 V operating range enables integration with low-voltage sensors and digital logic. Industrial use requires checking the exact temperature grade, isolation needs, EMC design, watchdog strategy, and output-safety behavior against the manufacturer documentation.
Recommandé
Smart Meter and Energy Display
The EFM32WG840F64-QFN64 is relevant to smart-metering and energy-display products that calculate measurements and present them locally. The Cortex-M4F processor can execute DSP-based current and voltage analysis at up to 48 MHz, while the integrated LCD controller drives a compact user display without requiring a separate display controller. The 64 KB flash stores firmware and calibration data, and AES acceleration supports protection of transmitted results. Low-power modes help a meter retain useful responsiveness without continuously running the processor at full speed. The backup-battery feature described by the manufacturer is also useful for maintaining timekeeping, memory state, or display operation when the main supply falls below the operating range.
Recommandé
Audio and Digital Signal Processing
The EFM32WG840F64-QFN64 can perform local audio or digital-signal-processing functions because the Cortex-M4F includes the full DSP instruction set and a hardware floating-point unit. At up to 48 MHz, it can execute filters, modulation, waveform analysis, and control routines with reduced reliance on an external processor. The LCD controller permits a compact user interface for equipment status or measurement results, while AES acceleration can protect configuration or stored data. The 64-QFN package supports dense instrument designs, but real-time performance depends on clock configuration, memory behavior, peripheral timing, and the selected algorithm. Use the manufacturer timing and application guidance to verify sampling rates and interrupt latency.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EFM32WG840F64-QFN64 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EFM32WG840F64-B-QFN64 | EFM32WG840F64-QFN64T |
|---|---|---|---|
| Package | 64-QFN (9x9) | 64-QFN (9x9) | 64-QFN (9x9) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| CPU Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| Ordering-Suffix Qualification | EFM32WG840F64-QFN64 | B ordering variant | T ordering variant |
Principaux différenciateurs
- Higher-performance Cortex-M4F core within the Gecko family (vs EFM32G840F64-QFN64)
- Same-package controlled ordering alternative (vs EFM32WG840F64-B-QFN64)
- Production-oriented reel ordering alternative (vs EFM32WG840F64-QFN64T)
Notes de conception
Decouple every supply connection according to the manufacturer pin table and recommended application schematic. The device operates from 1.98 V to 3.8 V, so rail sequencing and voltage tolerances should be checked against all attached peripherals. Place high-frequency bypass capacitors close to their associated power pins and keep high-current return paths separate from sensitive analog or display-return paths.
Use the exact 64-QFN 9 x 9 mm land pattern from the manufacturer package drawing and confirm the exposed-pad connection, solder mask, and paste pattern. The catalog lists a 64-contact QFN package, but a 64-QFN SVG is not available in the permitted package library; do not substitute a visually similar footprint without checking pad dimensions, pin numbering, and thermal-via requirements.
Route high-speed communication, debug, and display signals over continuous reference planes, while keeping switching nodes and inductors away from the Cortex-M4F supply and sensitive inputs. Check the exposed thermal pad connection against the PCB stackup and copper area. For designs using energy-saving modes, validate leakage paths on connected peripherals because external pull-ups or level shifters can dominate standby current.
Do not treat the EFM32WG840F64-B-QFN64 and EFM32WG840F64-QFN64T identifiers as interchangeable without reviewing the ordering table. Their headline package, processor, speed, and flash configuration match, but grade, revision, or reel conventions may differ. Also avoid treating the EFM32G840F64-QFN64 as a direct substitute: its Cortex-M3 core runs up to 32 MHz rather than the target’s 48 MHz Cortex-M4F.
Informations de conformité
No explicit compliance declaration was identified for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the manufacturer before procurement.