Silicon Labs

EFM32ZG108F32-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs

Référence : EFM32ZG108F32-B-QFN24 ✓ Actif
1.98 V to 3.8 V Vdss 0.5 uA Id 24-QFN (5 x 5 mm) Package 24 MHz Speed 32 kB (32K x 8) Memory
MOQ : 1 |

EFM32ZG108F32-B-QFN24 Présentation

The Silicon Labs EFM32ZG108F32-B-QFN24 is a 32-bit ARM Cortex-M0+ microcontroller operating up to 24 MHz, with 32 kB of Flash memory, 4 kB of RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. It belongs to the EFM32 Zero Gecko family of energy-focused microcontrollers for battery-powered and energy-conscious systems.

An MCU integrates a processor core, memory, clocking, analog interfaces, communications peripherals, and general-purpose I/O into one package. The Zero Gecko platform uses an ARM Cortex-M0+ core within a broader microcontroller hierarchy that also includes the Tiny Gecko, Huge Gecko, and Wireless Gecko families. Silicon Labs positions these devices for applications that require fast wake-up behavior and low energy consumption rather than maximum processing performance.

Key device characteristics include a 24 MHz maximum operating frequency, 32 kB Flash organized as 32K x 8, and 4 kB RAM. The device provides 17 digital I/O pins and two 16-bit timers. Its 1.98 V to 3.8 V operating supply range supports both 2.5 V and 3.3 V system designs. The EFM32ZG family is specified to consume as little as 0.5 uA in Stop mode and 114 uA/MHz in Run mode.

The Zero Gecko architecture combines autonomous peripherals, integrated analog functions, and energy-saving operating modes. These features allow sensing and control tasks to continue with limited processor intervention, reducing overall energy use in duty-cycled systems. The Cortex-M0+ architecture provides a compact instruction set suited to control logic, communications, and low-power sensing rather than compute-intensive workloads.

Typical uses include smart metering, energy and gas measurement, industrial sensing nodes, connected home devices, and compact battery-powered instruments. The 32 kB Flash footprint is appropriate for modest embedded applications, while the 4 kB RAM supports protocol buffering and short-lived working data. Designers should evaluate firmware size carefully when adding networking stacks or complex application libraries.

PCB design must connect AVDD_x, VDD_DREG, and IOVDD_x as described in the EFM32ZG108 hardware documentation, and decoupling must follow the recommended application circuit. Silicon Labs application note AN0002, EFM32 Hardware Design Considerations, is the appropriate reference for supply filtering, grounding, and layout.

This page consolidates the manufacturer specifications, package details, low-power characteristics, drop-in candidates, and practical PCB guidance needed to evaluate the EFM32ZG108F32-B-QFN24 for a new design.

Alternatives de remplacement direct pour EFM32ZG108F32-B-QFN24 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec EFM32ZG108F32-B-QFN24 (même facteur de forme et même empreinte) — différant par Flash Memory, Package, Timers, Product Type, Series.

Silicon Labs
Flash Memory: 32 kB (32K x 8)
Timers: 2 x 16-bit
Comparer avec EFM32ZG108F32-B-QFN24 →
Silicon Labs
Flash Memory: 4 KB (4K x 8)
Package: 24-QFN (5 mm x 5 mm)
Timers: 2 x 16-bit timers
Comparer avec EFM32ZG108F32-B-QFN24 →
Silicon Labs
Flash Memory: 8 kB (8K x 8)
Package: 24-QFN, 5x5 mm
Timers: 2 x 16-bit timers
Comparer avec EFM32ZG108F32-B-QFN24 →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
Series: Tiny Gecko
Comparer avec EFM32ZG108F32-B-QFN24 →
Silicon Labs
Flash Memory: 16 kB
Timers: 2 x 16-bit timers
Comparer avec EFM32ZG108F32-B-QFN24 →
Silicon Labs
Flash Memory: 32 KB (32K × 8)
Package: 24-QFN (5 mm × 5 mm)
Timers: 2 × 16-bit
Comparer avec EFM32ZG108F32-B-QFN24 →
Silicon Labs
Flash Memory: 8 KB
Package: 24-QFN, 5 x 5 mm
Comparer avec EFM32ZG108F32-B-QFN24 →

EFM32TG108F32-QFN24

✅ Remplacement direct
Silicon Labs
📦 24-QFN (5 x 5 mm)
ARM Cortex-M3 · 32 MHz · 32 kB (32K x 8) · 4 kB · 17 · 2 x 16-bit · 1.98 V to 3.8 V · 24-QFN (5x5 mm) Exposed Pad

Contactez-nous pour le prix

Voir la fiche technique →

EFM32TG108F8-D-QFN24R

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Silicon Labs
📦 24-QFN (5 x 5 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · 8 kB (8K x 8) · 2 kB · 17 pins · 2 x 16-bit timers · 1.98 V to 3.8 V · 24-QFN, 5x5 mm

Contactez-nous pour le prix

Voir la fiche technique →

EFM32TG108F4-D-QFN24R

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Silicon Labs
📦 24-QFN (5 x 5 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · ARM Cortex-M3 · 4 KB (4K x 8) · 2 KB · 17 · 2 x 16-bit timers

Contactez-nous pour le prix

Voir la fiche technique →

EFM32TG110F8-D-QFN24R

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Silicon Labs
📦 24-QFN (5 x 5 mm)
ARM Cortex-M3, 32-bit · 32 MHz · 8 KB (8K x 8) · 2 kB · 17 · 1.85 V to 3.8 V · 2 x 16-bit · Tiny Gecko

Contactez-nous pour le prix

Voir la fiche technique →

EFM32HG108F32G-C-QFN24

✅ Remplacement direct
📦 24-QFN (5 x 5 mm)
Same 32 kB Flash and 4 kB RAM in a 24-QFN footprint, but the Huge Gecko processor and peripheral set differ from Zero Gecko

📋 Alternative de référence (hors catalogue)

EFM32ZG108F32-B-QFN24 Valeurs maximales et caractéristiques électriques

Product Type 32-bit ARM Cortex-M0+ Microcontroller
Series EFM32 Zero Gecko
Maximum CPU Frequency 24 MHz
Flash Memory 32 kB (32K x 8)
RAM 4 kB
Digital I/O Pins 17
Timers 2 x 16-bit
Tension d'alimentation de fonctionnement 1.98 V to 3.8 V
Stop Mode Current 0.5 uA
Run Mode Current 114 uA/MHz
Processor Core ARM Cortex-M0+
Architecture 32-bit
Boîtier 24-QFN (5 x 5 mm)
Type de montage Surface Mount
Packaging Tray
Température de fonctionnement -40 C to +85 C

Guide de configuration des broches du EFM32ZG108F32-B-QFN24 24-qfn (5 x 5 mm)

Configuration des broches du EFM32ZG108F32-B-QFN24 (boîtier 24-qfn (5 x 5 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 24-qfn (5 x 5 mm) pour le EFM32ZG108F32-B-QFN24

Aucune donnée de brochage détaillée disponible pour EFM32ZG108F32-B-QFN24.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

EFM32ZG108F32-B-QFN24 convient pour 6 applications: Smart Energy Metering, Battery-Powered Environmental Sensors, Industrial Gas and Flow Monitoring, Connected Home and IoT Nodes, Portable Medical and Wellness Devices, Low-Power Asset Tracking.

⚡

Smart Energy Metering

The EFM32ZG108F32-B-QFN24 fits smart energy-meter sensing nodes that periodically measure voltage, current, or pulse inputs and transmit compact data records. Its 24 MHz Cortex-M0+ core provides enough throughput for protocol handling, while 32 kB Flash stores application firmware and 4 kB RAM supports short measurement and communication buffers. The family's 0.5 uA Stop-mode specification helps preserve battery life between measurement intervals. Autonomous peripherals can also reduce the time the CPU remains active, although the metering accuracy, safety isolation, and communication interface should be designed and verified separately.

🧩

Battery-Powered Environmental Sensors

The EFM32ZG108F32-B-QFN24 is appropriate for compact temperature, humidity, gas, and air-quality nodes that operate for long periods between wake-ups. Its 114 uA/MHz Run-mode figure and 0.5 uA Stop-mode figure provide a useful starting point for duty-cycle energy calculations, while fast wake-up behavior reduces the latency of scheduled measurements. The 17 digital I/O pins can support switches, indicator LEDs, and digital sensor interfaces, and the 24-QFN footprint keeps the assembly compact. Sensor standby current and analog front-end biasing must be included in the complete system energy budget.

🏭

Industrial Gas and Flow Monitoring

The EFM32ZG108F32-B-QFN24 can supervise gas, flow, or pressure monitoring modules that combine analog sensing with a low-rate communications link. The 24 MHz core handles sampling control, thresholding, diagnostics, and protocol formatting, while 32 kB Flash accommodates a moderately sized firmware image and 4 kB RAM is suitable for temporary sample and packet storage. Its 1.98 V to 3.8 V supply range accommodates 2.5 V and 3.3 V sensor subsystems. Because safety-related gas equipment may impose diagnostic and response-time requirements, validate the complete measurement chain and failure behavior before production use.

🌐

Connected Home and IoT Nodes

The EFM32ZG108F32-B-QFN24 suits small connected-home nodes that monitor a switch, occupancy sensor, or auxiliary device and relay status through a serial radio. Its 32 kB Flash and 4 kB RAM can hold a lightweight protocol stack and application logic, and the 17 available digital I/O pins simplify peripheral connection in a dense design. Low-power sleep reduces the energy burden of battery-operated nodes. The 24-QFN package leaves room for compact RF modules, but antenna placement, radio coexistence, and regulatory requirements should be handled as separate PCB-level design tasks.

💊

Portable Medical and Wellness Devices

The EFM32ZG108F32-B-QFN24 can serve as the control MCU in a small wellness monitor, low-complexity diagnostic accessory, or portable treatment-control peripheral. Its 24 MHz Cortex-M0+ core is appropriate for sampling, user-interface updates, and state-machine control, while the compact 24-QFN package supports space-constrained enclosures. The device's supply range permits operation from 2.5 V or 3.3 V rails, although medical designs may require additional isolation, monitoring, validation, and documentation beyond the MCU's own specifications. Confirm the applicable product-safety and regulatory requirements for the finished instrument.

📱

Low-Power Asset Tracking

The EFM32ZG108F32-B-QFN24 is useful for compact asset-tracking tags that wake periodically, read a motion or asset-state input, and transmit a short status update. The Zero Gecko family's low Stop-mode current and rapid wake-up behavior reduce the time the tag spends awake, which is important when the available energy comes from a small cell or coin cell. Thirty-two kilobytes of Flash is sufficient for focused tracking firmware, while 4 kB RAM can buffer sensor results and radio-frame data. Radio choice, battery self-discharge, and enclosure heat transfer will usually dominate the final battery-life calculation.

What is the EFM32ZG108F32-B-QFN24?
The EFM32ZG108F32-B-QFN24 is a Silicon Labs 32-bit ARM Cortex-M0+ microcontroller with a maximum clock speed of 24 MHz, 32 kB of Flash, 4 kB of RAM, and 17 digital I/O pins. The device is packaged in a 24-QFN package measuring 5 x 5 mm. According to the EFM32ZG manufacturer datasheet, it is designed around a low-power platform with autonomous peripherals and energy-saving modes for battery-operated and energy-sensitive equipment.
What are the key specifications of EFM32ZG108F32-B-QFN24?
The principal EFM32ZG108F32-B-QFN24 specifications are a 24 MHz ARM Cortex-M0+ core, 32 kB Flash memory, 4 kB RAM, 17 digital I/O pins, two 16-bit timers, and a 1.98 V to 3.8 V supply range. The manufacturer datasheet also identifies the family as consuming as little as 0.5 uA in Stop mode and 114 uA/MHz in Run mode. These figures make the device suitable for compact, duty-cycled sensing and control products.
Which operating voltage range does the EFM32ZG108F32-B-QFN24 support?
The EFM32ZG108F32-B-QFN24 operates from 1.98 V to 3.8 V. This range supports 2.5 V and 3.3 V system rails, as reflected in the EFM32ZG108 technical specifications and product listings. Keep all AVDD_x, VDD_DREG, and IOVDD_x connections within the manufacturer-recommended supply network. Use AN0002, EFM32 Hardware Design Considerations, for the complete filtering and decoupling arrangement.
How much power does the EFM32ZG108F32-B-QFN24 consume?
The EFM32ZG family is specified to consume as little as 0.5 uA in Stop mode and 114 uA/MHz in Run mode. These are family-level figures from the manufacturer EFM32ZG datasheet rather than guaranteed application-level totals. Actual consumption depends on clock frequency, active peripherals, flash execution state, supply voltage, and the time the device spends in each mode. Disable unused peripherals and select the lowest suitable clock rate to reduce duty-cycled energy use.
Where can I download the EFM32ZG108F32-B-QFN24 datasheet PDF?
The official EFM32ZG datasheet is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32zg-datasheet.pdf. It covers the EFM32ZG108 device family, electrical characteristics, memory, peripherals, and package information. A device-specific copy of the EFM32ZG108 datasheet is also published at the Keil documentation site. Use the manufacturer PDF as the primary reference when designing the power network and assigning pins.
Where can I find the EFM32ZG108F32-B-QFN24 pinout?
The EFM32ZG108F32-B-QFN24 pin assignment is documented in the pin-description tables of the EFM32ZG108 datasheet, which is published by Silicon Labs and also linked from the Keil documentation site. The device uses a 24-QFN 5 x 5 mm package with 17 digital I/O pins and an exposed thermal pad. Use the manufacturer pin table when assigning signals and confirming alternate-function multiplexing rather than relying on a generic package drawing.
What can replace the EFM32ZG108F32-B-QFN24?
The closest drop-in candidates include the EFM32TG108F32-QFN24, EFM32HG108F32G-C-QFN24, and several EFM32 Tiny Gecko QFN24 variants. All use a 24-QFN footprint, but changing processor core, Flash size, RAM size, or peripheral sets can require firmware and PCB verification. Treat a mechanical footprint match as only the first screening step, then confirm pin functions, memory requirements, peripheral compatibility, and software support.
What is the best drop-in replacement for EFM32ZG108F32-B-QFN24?
The EFM32TG108F32-QFN24 is the closest same-brand candidate because it retains 32 kB Flash, 4 kB RAM, 24 MHz-class performance, and the 24-QFN footprint. It upgrades the processor from ARM Cortex-M0+ to ARM Cortex-M3 and raises the maximum speed to 32 MHz. Pin functions and firmware should still be rechecked because a faster core does not guarantee identical peripheral behavior across Zero Gecko and Tiny Gecko families.
Is the EFM32TG108F32-QFN24 the same as the EFM32ZG108F32-B-QFN24?
No, the EFM32TG108F32-QFN24 is related but not electrically and architecturally identical to the EFM32ZG108F32-B-QFN24. Both provide 32 kB Flash, 4 kB RAM, 17 digital I/O pins, and a 24-QFN package, but the Tiny Gecko part uses ARM Cortex-M3 at up to 32 MHz while the Zero Gecko part uses ARM Cortex-M0+ at up to 24 MHz. Review timing, peripheral, and firmware differences before substituting them.
When should I choose the EFM32ZG108F32-B-QFN24 over an EFM32TG108F32-QFN24?
Choose the EFM32ZG108F32-B-QFN24 when a Cortex-M0+ ecosystem, existing Zero Gecko firmware, or the lowest-complexity control implementation is the priority. Choose the EFM32TG108F32-QFN24 when a Cortex-M3 core and higher clock rate are useful. Both fit the same general 24-QFN footprint, so verify the detailed pin table and application firmware rather than assuming that faster processing also means identical behavior.
Is the EFM32ZG108F32-B-QFN24 suitable for battery-powered sensing devices?
Yes, the EFM32ZG108F32-B-QFN24 is well suited to battery-powered sensing devices because the Zero Gecko family supports low-power operating modes, fast wake-up behavior, and autonomous peripherals. The datasheet identifies Stop-mode consumption as low as 0.5 uA and Run-mode consumption as 114 uA/MHz. Application-level battery life also depends on sensor duty cycle, analog biasing, leakage paths, and the time the system remains awake.
Where can I buy the EFM32ZG108F32-B-QFN24 online?
Use the Request a Quote form on this page to request the EFM32ZG108F32-B-QFN24, current stock position, and order lead time from XAIPART. The request should identify the exact EFM32ZG108F32-B-QFN24 MPN and the required package format, such as tray or reel, so the supplier can confirm the correct variant. Current availability and commercial terms should always be confirmed through the quotation process.
What is the price of the EFM32ZG108F32-B-QFN24?
Current pricing for the EFM32ZG108F32-B-QFN24 is provided through the Request a Quote form on this page. Submit the exact MPN and required quantity to obtain a quotation that reflects current market pricing and order handling. Because distributor inventory, production volume, and packaging requirements can change the final commercial result, use the form rather than relying on an archived listing.
What is the lead time for the EFM32ZG108F32-B-QFN24?
Request the current lead time through the Request a Quote form on this page, specifying the required quantity and whether the EFM32ZG108F32-B-QFN24 will be supplied in tray or reel packaging. Lead time depends on manufacturer inventory, distributor stock, and the requested delivery quantity. Confirm the production status and available supply during the quotation rather than assuming availability from an archived catalog entry.
Is the EFM32ZG108F32-B-QFN24 currently in stock?
Current stock status for the EFM32ZG108F32-B-QFN24 should be confirmed through the Request a Quote form on this page. Provide the exact MPN, quantity, and required packaging format so the availability check matches your production plan. The presence of a distributor listing does not by itself guarantee a particular quantity is immediately available for allocation.
How does the EFM32ZG108F32-B-QFN24 compare with a 24 MHz Cortex-M0+ MCU from another vendor?
A cross-vendor 24 MHz Cortex-M0+ MCU may appear similar by core speed and package size, but it is not automatically a drop-in replacement. Memory size, pin multiplexing, analog blocks, supply pins, timer architecture, and software tooling must all match closely. No cross-brand candidate is presented here because a verified, pin-compatible source for the exact QFN24 footprint was not established; use the manufacturer pin table for any board-level substitution.

Données de référence d'ingénierie pour EFM32ZG108F32-B-QFN24 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Select the EFM32ZG108F32-B-QFN24 when your firmware benefits from a 32 kB Flash budget, 4 kB RAM, 17 digital I/O pins, and an established ARM Cortex-M0+ development flow in a 24-QFN footprint. Its Zero Gecko low-power modes are well suited to battery-operated sensing and metering products. The EFM32TG108F32-QFN24 is the closest listed option when the same memory capacity is needed but a Cortex-M3 core and 32 MHz maximum clock are preferred. The EFM32TG108F8-D-QFN24R and EFM32TG108F4-D-QFN24R should be chosen only when their smaller Flash budgets comfortably fit the application. Use the EFM32HG108F32G-C-QFN24 only after reviewing the differences between Huge Gecko and Zero Gecko peripherals. For every candidate, verify the detailed pin table, exposed-pad connection, supply network, and firmware before releasing a production PCB.

Comparaison avec les alternatives

Paramètre Ce produit EFM32TG108F32-QFN24 EFM32TG108F8-D-QFN24R EFM32TG108F4-D-QFN24R EFM32TG110F8-D-QFN24R EFM32HG108F32G-C-QFN24
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 24-QFN (5 x 5 mm) 24-QFN (5 x 5 mm) 24-QFN (5 x 5 mm) 24-QFN (5 x 5 mm) 24-QFN (5 x 5 mm) 24-QFN (5 x 5 mm)
Flash Memory 32 kB 32 kB 8 kB 4 kB 8 kB 32 kB
Digital I/O Pins 17 17 17 17 17 17

Principaux différenciateurs

  • Largest Flash capacity among the listed same-package MCU candidates (vs EFM32TG108F8-D-QFN24R)
  • Direct match for 32 kB Flash and 4 kB RAM applications (vs EFM32HG108F32G-C-QFN24)
  • Lower-complexity Cortex-M0+ implementation (vs EFM32TG108F32-QFN24)
  • Family low-power characteristics for duty-cycled products (vs EFM32TG108F8-D-QFN24R)

Notes de conception

Connect AVDD_x, VDD_DREG, and IOVDD_x according to the EFM32ZG108 recommended supply network. Silicon Labs application note AN0002, EFM32 Hardware Design Considerations, is the primary guide for supply filtering and decoupling. Place the regulator and storage components close to their intended pins, keep the analog and digital return paths well controlled, and verify startup behavior with the final load. Do not estimate the supply network solely from the 1.98 V to 3.8 V operating range.

The exposed pad beneath the 24-QFN package is a thermal and electrical feature, not an optional footprint. Follow the manufacturer land pattern for exposed-pad dimensions, solder-mask definition, and paste volume. Provide adequate ground-plane area beneath the device to improve heat transfer from the Cortex-M0+ core and nearby analog circuitry. Inspect the assembled QFN joints with suitable X-ray or cross-section methods because voiding under a small exposed pad can affect both heat dissipation and electrical return.

Do not treat a matching QFN24 outline as proof of a zero-risk substitution. Before replacing the EFM32ZG108F32-B-QFN24, compare the complete pin-description table, alternate functions, supply connections, exposed-pad connection, ADC channels, timer routing, and debug pins. Firmware must also be checked for differences in the ARM Cortex-M0+ versus Cortex-M3 environments and for reduced Flash capacity in lower-memory variants. Update the project device definition and perform timing and peripheral regression tests.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The EFM32ZG108F32-B-QFN24 is an industrial-temperature microcontroller in a surface-mount QFN package. Specific environmental compliance declarations should be confirmed from the current manufacturer product page or material declaration for the exact ordering code.

Recherches associées

EFM32ZG108F32-B-QFN24 EFM32ZG108F32-B-QFN24 datasheet EFM32ZG108F32-B-QFN24 datasheet pdf EFM32ZG108F32-B-QFN24 pinout EFM32ZG108F32-B-QFN24 price EFM32ZG108F32-B-QFN24 stock Silicon Labs EFM32ZG108F32-B-QFN24 EFM32ZG108F32 24MHz Cortex-M0+ EFM32ZG108F32 QFN24 footprint EFM32ZG108F32 drop-in replacement EFM32ZG108F32 vs EFM32TG108F32 EFM32ZG108F32 smart metering application EFM32ZG108F32 battery powered sensor EFM32ZG108F32 AN0002 hardware design

Composants & termes associés

Silicon Labs EFM32ZG108F32-B-QFN24 EFM32TG108F32-QFN24 EFM32HG108F32G-C-QFN24 EFM32 Zero Gecko EFM32 Tiny Gecko EFM32 Huge Gecko ARM Cortex-M0+ ARM Cortex-M3 microcontroller MCU system-on-chip 32-bit microcontroller 24-QFN QFN package family surface mount SMD package 32 kB Flash 4 kB RAM 24 MHz 17 digital I/O pins 16-bit timer Stop mode Run mode smart metering gas monitoring energy harvesting IoT sensor node AN0002 EFM32 Hardware Design Considerations
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ