EFM32ZG108F32-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs
MPN: EFM32ZG108F32-B-QFN24 ✓ فعالEFM32ZG108F32-B-QFN24 نمای کلی
An MCU integrates a processor core, memory, clocking, analog interfaces, communications peripherals, and general-purpose I/O into one package. The Zero Gecko platform uses an ARM Cortex-M0+ core within a broader microcontroller hierarchy that also includes the Tiny Gecko, Huge Gecko, and Wireless Gecko families. Silicon Labs positions these devices for applications that require fast wake-up behavior and low energy consumption rather than maximum processing performance.
Key device characteristics include a 24 MHz maximum operating frequency, 32 kB Flash organized as 32K x 8, and 4 kB RAM. The device provides 17 digital I/O pins and two 16-bit timers. Its 1.98 V to 3.8 V operating supply range supports both 2.5 V and 3.3 V system designs. The EFM32ZG family is specified to consume as little as 0.5 uA in Stop mode and 114 uA/MHz in Run mode.
The Zero Gecko architecture combines autonomous peripherals, integrated analog functions, and energy-saving operating modes. These features allow sensing and control tasks to continue with limited processor intervention, reducing overall energy use in duty-cycled systems. The Cortex-M0+ architecture provides a compact instruction set suited to control logic, communications, and low-power sensing rather than compute-intensive workloads.
Typical uses include smart metering, energy and gas measurement, industrial sensing nodes, connected home devices, and compact battery-powered instruments. The 32 kB Flash footprint is appropriate for modest embedded applications, while the 4 kB RAM supports protocol buffering and short-lived working data. Designers should evaluate firmware size carefully when adding networking stacks or complex application libraries.
PCB design must connect AVDD_x, VDD_DREG, and IOVDD_x as described in the EFM32ZG108 hardware documentation, and decoupling must follow the recommended application circuit. Silicon Labs application note AN0002, EFM32 Hardware Design Considerations, is the appropriate reference for supply filtering, grounding, and layout.
This page consolidates the manufacturer specifications, package details, low-power characteristics, drop-in candidates, and practical PCB guidance needed to evaluate the EFM32ZG108F32-B-QFN24 for a new design.
جایگزینهای drop-in برای EFM32ZG108F32-B-QFN24 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای EFM32ZG108F32-B-QFN24 (همان فرمفاکتور و فوتپرینت) — متفاوت در Flash Memory, Package, Timers, Product Type, Series.
EFM32TG108F32-QFN24
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32TG108F8-D-QFN24R
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32TG108F4-D-QFN24R
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32TG110F8-D-QFN24R
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32HG108F32G-C-QFN24
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
EFM32ZG108F32-B-QFN24 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit ARM Cortex-M0+ Microcontroller |
| Series | EFM32 Zero Gecko |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 32 kB (32K x 8) |
| RAM | 4 kB |
| Digital I/O Pins | 17 |
| Timers | 2 x 16-bit |
| ولتاژ تغذیه کاری | 1.98 V to 3.8 V |
| Stop Mode Current | 0.5 uA |
| Run Mode Current | 114 uA/MHz |
| Processor Core | ARM Cortex-M0+ |
| Architecture | 32-bit |
| بستهبندی | 24-QFN (5 x 5 mm) |
| نوع نصب | Surface Mount |
| Packaging | Tray |
| دمای کاری | -40 C to +85 C |
راهنمای پیکربندی پین EFM32ZG108F32-B-QFN24 24-qfn (5 x 5 mm)
پیکربندی پین برای EFM32ZG108F32-B-QFN24 (پکیج 24-qfn (5 x 5 mm)). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای EFM32ZG108F32-B-QFN24.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
EFM32ZG108F32-B-QFN24 مناسب است برای 6 کاربردs: Smart Energy Metering, Battery-Powered Environmental Sensors, Industrial Gas and Flow Monitoring, Connected Home and IoT Nodes, Portable Medical and Wellness Devices, Low-Power Asset Tracking.
Smart Energy Metering
The EFM32ZG108F32-B-QFN24 fits smart energy-meter sensing nodes that periodically measure voltage, current, or pulse inputs and transmit compact data records. Its 24 MHz Cortex-M0+ core provides enough throughput for protocol handling, while 32 kB Flash stores application firmware and 4 kB RAM supports short measurement and communication buffers. The family's 0.5 uA Stop-mode specification helps preserve battery life between measurement intervals. Autonomous peripherals can also reduce the time the CPU remains active, although the metering accuracy, safety isolation, and communication interface should be designed and verified separately.
پیشنهادی
Battery-Powered Environmental Sensors
The EFM32ZG108F32-B-QFN24 is appropriate for compact temperature, humidity, gas, and air-quality nodes that operate for long periods between wake-ups. Its 114 uA/MHz Run-mode figure and 0.5 uA Stop-mode figure provide a useful starting point for duty-cycle energy calculations, while fast wake-up behavior reduces the latency of scheduled measurements. The 17 digital I/O pins can support switches, indicator LEDs, and digital sensor interfaces, and the 24-QFN footprint keeps the assembly compact. Sensor standby current and analog front-end biasing must be included in the complete system energy budget.
پیشنهادی
Industrial Gas and Flow Monitoring
The EFM32ZG108F32-B-QFN24 can supervise gas, flow, or pressure monitoring modules that combine analog sensing with a low-rate communications link. The 24 MHz core handles sampling control, thresholding, diagnostics, and protocol formatting, while 32 kB Flash accommodates a moderately sized firmware image and 4 kB RAM is suitable for temporary sample and packet storage. Its 1.98 V to 3.8 V supply range accommodates 2.5 V and 3.3 V sensor subsystems. Because safety-related gas equipment may impose diagnostic and response-time requirements, validate the complete measurement chain and failure behavior before production use.
پیشنهادی
Connected Home and IoT Nodes
The EFM32ZG108F32-B-QFN24 suits small connected-home nodes that monitor a switch, occupancy sensor, or auxiliary device and relay status through a serial radio. Its 32 kB Flash and 4 kB RAM can hold a lightweight protocol stack and application logic, and the 17 available digital I/O pins simplify peripheral connection in a dense design. Low-power sleep reduces the energy burden of battery-operated nodes. The 24-QFN package leaves room for compact RF modules, but antenna placement, radio coexistence, and regulatory requirements should be handled as separate PCB-level design tasks.
پیشنهادی
Portable Medical and Wellness Devices
The EFM32ZG108F32-B-QFN24 can serve as the control MCU in a small wellness monitor, low-complexity diagnostic accessory, or portable treatment-control peripheral. Its 24 MHz Cortex-M0+ core is appropriate for sampling, user-interface updates, and state-machine control, while the compact 24-QFN package supports space-constrained enclosures. The device's supply range permits operation from 2.5 V or 3.3 V rails, although medical designs may require additional isolation, monitoring, validation, and documentation beyond the MCU's own specifications. Confirm the applicable product-safety and regulatory requirements for the finished instrument.
پیشنهادی
Low-Power Asset Tracking
The EFM32ZG108F32-B-QFN24 is useful for compact asset-tracking tags that wake periodically, read a motion or asset-state input, and transmit a short status update. The Zero Gecko family's low Stop-mode current and rapid wake-up behavior reduce the time the tag spends awake, which is important when the available energy comes from a small cell or coin cell. Thirty-two kilobytes of Flash is sufficient for focused tracking firmware, while 4 kB RAM can buffer sensor results and radio-frame data. Radio choice, battery self-discharge, and enclosure heat transfer will usually dominate the final battery-life calculation.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای EFM32ZG108F32-B-QFN24 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | EFM32TG108F32-QFN24 | EFM32TG108F8-D-QFN24R | EFM32TG108F4-D-QFN24R | EFM32TG110F8-D-QFN24R | EFM32HG108F32G-C-QFN24 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 24-QFN (5 x 5 mm) | 24-QFN (5 x 5 mm) | 24-QFN (5 x 5 mm) | 24-QFN (5 x 5 mm) | 24-QFN (5 x 5 mm) | 24-QFN (5 x 5 mm) |
| Flash Memory | 32 kB | 32 kB | 8 kB | 4 kB | 8 kB | 32 kB |
| Digital I/O Pins | 17 | 17 | 17 | 17 | 17 | 17 |
تفاوتهای کلیدی
- Largest Flash capacity among the listed same-package MCU candidates (در مقابلEFM32TG108F8-D-QFN24R)
- Direct match for 32 kB Flash and 4 kB RAM applications (در مقابلEFM32HG108F32G-C-QFN24)
- Lower-complexity Cortex-M0+ implementation (در مقابلEFM32TG108F32-QFN24)
- Family low-power characteristics for duty-cycled products (در مقابلEFM32TG108F8-D-QFN24R)
یادداشتهای طراحی
Connect AVDD_x, VDD_DREG, and IOVDD_x according to the EFM32ZG108 recommended supply network. Silicon Labs application note AN0002, EFM32 Hardware Design Considerations, is the primary guide for supply filtering and decoupling. Place the regulator and storage components close to their intended pins, keep the analog and digital return paths well controlled, and verify startup behavior with the final load. Do not estimate the supply network solely from the 1.98 V to 3.8 V operating range.
The exposed pad beneath the 24-QFN package is a thermal and electrical feature, not an optional footprint. Follow the manufacturer land pattern for exposed-pad dimensions, solder-mask definition, and paste volume. Provide adequate ground-plane area beneath the device to improve heat transfer from the Cortex-M0+ core and nearby analog circuitry. Inspect the assembled QFN joints with suitable X-ray or cross-section methods because voiding under a small exposed pad can affect both heat dissipation and electrical return.
Do not treat a matching QFN24 outline as proof of a zero-risk substitution. Before replacing the EFM32ZG108F32-B-QFN24, compare the complete pin-description table, alternate functions, supply connections, exposed-pad connection, ADC channels, timer routing, and debug pins. Firmware must also be checked for differences in the ARM Cortex-M0+ versus Cortex-M3 environments and for reduced Flash capacity in lower-memory variants. Update the project device definition and perform timing and peripheral regression tests.
اطلاعات انطباق
The EFM32ZG108F32-B-QFN24 is an industrial-temperature microcontroller in a surface-mount QFN package. Specific environmental compliance declarations should be confirmed from the current manufacturer product page or material declaration for the exact ordering code.