Silicon Labs

EFM32ZG210F32-QFN32T - 24MHz Cortex-M0+ MCU | Silicon Labs

Référence : EFM32ZG210F32-QFN32T ✓ Actif
2.5 V or 3.3 V Vdss 0.5 µA Id 32-QFN, 6 mm x 6 mm Package 24 MHz Speed 32 KB (32K x 8) Memory
MOQ : 1 |

EFM32ZG210F32-QFN32T Présentation

The Silicon Labs EFM32ZG210F32-QFN32T is a 24 MHz, 32-bit ARM Cortex-M0+ microcontroller with 32 KB of Flash memory, 4 KB of RAM, and 24 digital I/O pins in a 32-pin QFN package. It is designed for energy-sensitive and battery-operated systems that require low active and sleep-mode power, fast wake-up behavior, and integrated analog and peripheral resources.

A microcontroller is a programmable semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The EFM32ZG belongs to the Zero Gecko family of 32-bit microcontrollers and sits within the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. Its ARM Cortex-M0+ core provides a compact instruction set and efficient event-driven execution for embedded control, while its energy-management architecture supports applications in which average power consumption matters more than maximum processing throughput.

The EFM32ZG210F32-QFN32T operates at up to 24 MHz and provides 32 KB of Flash alongside 4 KB of RAM. The Zero Gecko family consumes as little as 0.5 µA in Stop mode and 114 µA/MHz in Run mode. Silicon Labs also identifies integrated ADC and AES capabilities, along with two 16-bit timers and 24 digital I/O pins, allowing a compact design to handle sensing, security, timing, and general-purpose control functions without relying on a large number of external devices.

Its energy-conscious architecture combines conventional processor operation with low-energy modes, fast wake-up capability, and autonomous peripheral operation. The Stop-mode figure of 0.5 µA is especially relevant when the system spends most of its time waiting for an external event. The Run-mode figure of 114 µA/MHz provides a useful basis for estimating active consumption at a selected clock rate, although actual board-level consumption depends on the operating mode, enabled peripherals, flash activity, and GPIO state.

Typical uses include battery-powered sensors, compact industrial monitoring equipment, low-power IoT endpoints, consumer accessories, and embedded control modules. The 24 MHz Cortex-M0+ core is appropriate for protocol handling, state-machine control, data acquisition, and supervisory tasks that do not require a high-performance Cortex-M3 or Cortex-M4 processor. A 2.5 V or 3.3 V supply configuration also supports common embedded-system rails.

PCB design should provide a stable supply and adequate decoupling close to the device, preserve the exposed-pad thermal path where applicable, and follow the manufacturer pin and land-pattern instructions exactly. Firmware development should account for the 32 KB Flash and 4 KB RAM limits, configure unused pins appropriately, and select sleep modes based on wake-up latency and response-time requirements rather than relying only on the lowest published current figure.

Alternatives de remplacement direct pour EFM32ZG210F32-QFN32T — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec EFM32ZG210F32-QFN32T (même facteur de forme et même empreinte) — différant par Digital I/O Pins, Flash Memory, Package, Stop Mode Current, Timers.

Silicon Labs
Digital I/O Pins: 24
Flash Memory: 32 kB
Package: QFN-32 (6x6 mm) with exposed pad
Comparer avec EFM32ZG210F32-QFN32T →

EFM32ZG210F32-QFN32

✅ Remplacement direct
Silicon Labs
📦 QFN-32 (6 mm x 6 mm)
ARM Cortex-M0+ (32-bit) · 24 MHz · 32 kB · 4 kB · 24 · 2 x 16-bit · 1.85 V to 3.8 V (single supply) · 2.5 V / 3.3 V

Contactez-nous pour le prix

Voir la fiche technique →

EFM32ZG210F32-B-QFN32R

✅ Remplacement direct
📦 QFN-32 (6 mm x 6 mm)
Same QFN-32 Zero Gecko family and 32 KB Flash class; the B and R suffix codes identify ordering, grade, or packaging options that must be matched to the original requirements.

📋 Alternative de référence (hors catalogue)

EFM32ZG210F8-QFN32T

✅ Remplacement direct
📦 QFN-32 (6 mm x 6 mm)
Same QFN-32 Zero Gecko family and 24 MHz platform, but Flash decreases from 32 KB to 8 KB, a 75% reduction that requires firmware-capacity review.

📋 Alternative de référence (hors catalogue)

EFM32ZG210F32-QFN32T Valeurs maximales et caractéristiques électriques

Processor Core ARM Cortex-M0+
Architecture 32-bit RISC
Maximum CPU Frequency 24 MHz
Flash Memory 32 KB (32K x 8)
RAM Memory 4 KB
Digital I/O Pins 24 pins
Timers 2 x 16-bit timers
Tension d'alimentation 2.5 V or 3.3 V
Stop Mode Current 0.5 µA
Run Mode Current 114 µA/MHz
Analog Peripheral ADC
Security Peripheral AES
Boîtier 32-QFN, 6 mm x 6 mm
Type de montage Surface Mount
Shipping Package Tape & Reel

Guide de configuration des broches du EFM32ZG210F32-QFN32T tape & reel

Configuration des broches du EFM32ZG210F32-QFN32T (boîtier tape & reel). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier tape & reel pour le EFM32ZG210F32-QFN32T

Aucune donnée de brochage détaillée disponible pour EFM32ZG210F32-QFN32T.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

EFM32ZG210F32-QFN32T convient pour 6 applications: Battery-Powered Sensor Nodes, Industrial Monitoring and Control, Low-Power IoT Endpoints, Consumer Accessories and Wearable Controls, Data Acquisition and Analog Monitoring, Secure Embedded Control Modules.

🧩

Battery-Powered Sensor Nodes

The EFM32ZG210F32-QFN32T fits compact sensor nodes because its Cortex-M0+ core can handle sampling, filtering, and local control at up to 24 MHz while the Zero Gecko platform supports a Stop-mode current as low as 0.5 µA. Place the MCU between the sensor interface and system power rail, configure unused GPIOs to reduce leakage, and wake the device only when new measurements require processing. Its 32 KB Flash supports application firmware, while 4 KB of RAM can hold bounded sample buffers and protocol state.

🏭

Industrial Monitoring and Control

The EFM32ZG210F32-QFN32T is appropriate for industrial monitoring modules that combine periodic sensor reading with local status reporting. Its 24 MHz Cortex-M0+ core provides sufficient throughput for control loops, digital filtering, and communication state machines, while two 16-bit timers support timing and pulse-related tasks. The 24 digital I/O pins allow connections to discrete sensors, indicators, or interface logic. The 2.5 V or 3.3 V operating options also align with common embedded supply rails, subject to the exact device electrical limits.

🌐

Low-Power IoT Endpoints

The EFM32ZG210F32-QFN32T supports compact IoT endpoints that alternate between short active processing periods and long low-power intervals. Its 114 µA/MHz Run-mode characteristic provides a basis for active-power calculations, while the 0.5 µA Stop-mode figure reduces standby demand when wake-up latency is acceptable. Use autonomous peripheral operation where practical, avoid unnecessary polling, and divide firmware into active acquisition and low-energy phases. The 32 KB Flash capacity is suitable for lightweight protocol stacks and application logic without requiring a larger memory device.

📱

Consumer Accessories and Wearable Controls

The EFM32ZG210F32-QFN32T can serve as the control MCU in compact accessories that perform button handling, status indication, and low-rate sensor processing. Its small QFN-32 package supports dense layouts, and the ARM Cortex-M0+ processor handles event-driven user-interface logic without the power cost of a higher-performance core. Configure unused pins carefully and use Stop mode between user events. The 32 KB Flash and 4 KB RAM should be checked against boot code, UI state, wireless-controller support, and upgrade requirements before finalizing the design.

🖥️

Data Acquisition and Analog Monitoring

The EFM32ZG210F32-QFN32T is suitable for compact data-acquisition systems that need an ADC, digital I/O, and deterministic local processing in one package. Its 24 MHz Cortex-M0+ core can execute sampling schedules, basic calibration routines, and threshold logic, while two 16-bit timers assist with periodic measurement tasks. Keep analog inputs on the pins and reference arrangement specified by the manufacturer, route sensitive signals away from switching nodes, and validate the ADC’s resolution and acquisition requirements before treating the generic ADC feature as sufficient for a precision measurement.

🔒

Secure Embedded Control Modules

The EFM32ZG210F32-QFN32T is suitable for embedded control modules requiring an AES-capable hardware peripheral and a compact low-power processor. The security block can support algorithms that otherwise place repetitive encryption work on the CPU, while the Cortex-M0+ core remains available for control functions. Firmware designers should select the appropriate cryptographic mode, key-management method, and protocol implementation rather than assuming that the presence of AES alone secures the complete application. Boot access, debug configuration, and update authentication also require deliberate implementation.

What is the EFM32ZG210F32-QFN32T?
The EFM32ZG210F32-QFN32T is a 32-bit ARM Cortex-M0+ microcontroller from Silicon Labs that operates up to 24 MHz and combines 32 KB of Flash, 4 KB of RAM, and 24 digital I/O pins in a 6 mm x 6 mm QFN package. According to the Silicon Labs EFM32ZG data sheet, the device is built for energy-sensitive applications using low-power operating modes, autonomous peripherals, fast wake-up behavior, and integrated analog and security resources.
What are the key specifications of EFM32ZG210F32-QFN32T that engineers should know?
The EFM32ZG210F32-QFN32T is a 24 MHz, 32-bit ARM Cortex-M0+ MCU with 32 KB of Flash and 4 KB of RAM. Silicon Labs specifies 24 digital I/O pins, two 16-bit timers, ADC and AES functions, and a 32-QFN package measuring 6 mm x 6 mm. The Zero Gecko family is also documented with consumption as low as 0.5 µA in Stop mode and 114 µA/MHz in Run mode, making power-state configuration central to the design.
How much Flash and RAM does the EFM32ZG210F32-QFN32T have?
The EFM32ZG210F32-QFN32T provides 32 KB of Flash memory and 4 KB of RAM. The DigiKey product listing identifies the Flash organization as 32K x 8, while the Silicon Labs device page lists 4 KB of RAM. These constraints should be checked early when sizing firmware, boot code, protocol buffers, logging features, and application data structures.
What is the maximum operating frequency of the EFM32ZG210F32-QFN32T?
The EFM32ZG210F32-QFN32T operates at up to 24 MHz. According to the Silicon Labs product page and the EFM32ZG data sheet, this is an ARM Cortex-M0+ Zero Gecko device rather than the 32 MHz Cortex-M3 architecture associated with the EFM32TG family. Firmware timing and peripheral clock assumptions should therefore use 24 MHz as the upper operating frequency for this part.
How much current does the EFM32ZG210F32-QFN32T consume in Run and Stop mode?
The EFM32ZG family consumes as little as 0.5 µA in Stop mode and 114 µA/MHz in Run mode, according to the Silicon Labs EFM32ZG data sheet. These figures are family-level operating characteristics rather than complete system power budgets. Actual consumption depends on clock frequency, active peripherals, flash operations, GPIO loading, and the duration spent in each power mode.
Where can I download the EFM32ZG210F32-QFN32T datasheet PDF?
The official EFM32ZG data sheet is available from Silicon Labs at the product datasheet link on this page, and the exact EFM32ZG210F32-QFN32T orderable-device page provides the specifications tab. Use the manufacturer PDF for pin descriptions, electrical characteristics, package drawings, clock details, and recommended application information. The product suffix and device revision should be checked against the package and temperature-grade ordering information before release.
Where is the EFM32ZG210F32-QFN32T pinout and QFN-32 land pattern?
The EFM32ZG210F32-QFN32T pinout and land pattern are documented in the manufacturer EFM32ZG data sheet. The part uses a 6 mm x 6 mm, 32-pin QFN package, and the assembly drawing identifies the exposed-pad connection and dimensional tolerances. Use that drawing for the PCB footprint, and use the pin-description table when assigning alternate-function signals, power pins, ground pins, and analog connections.
Is the EFM32ZG210F32-QFN32T suitable for battery-powered devices?
Yes, the EFM32ZG210F32-QFN32T is suitable for battery-powered systems that benefit from a 0.5 µA Stop-mode figure and a 24 MHz Cortex-M0+ core. Silicon Labs positions the Zero Gecko family for battery-operated products and systems requiring high performance with low energy use. The final battery-life estimate should include sensor standby current, regulator efficiency, radio activity, and the time required for wake-up and initialization.
When should I choose the EFM32ZG210F32-QFN32T over another Zero Gecko MCU?
Choose the EFM32ZG210F32-QFN32T when the design needs 32 KB of Flash, 4 KB of RAM, a 32-QFN footprint, and a 24 MHz Cortex-M0+ core in a low-power system. A Zero Gecko variant with less Flash may fit a smaller application, but reducing memory can eliminate boot, protocol, or update headroom. Select this part when its 32-QFN pin count and resource limits align with the intended PCB and firmware.
What can replace the EFM32ZG210F32-QFN32T?
The closest documented alternatives are the EFM32ZG210F32-QFN32 and EFM32ZG210F32-B-QFN32R, which retain the QFN-32 device family and 32 KB Flash configuration. The EFM32ZG210F8-QFN32T is also pin-compatible as an 8 KB Flash variant, but it reduces firmware capacity by 24 KB and therefore requires an explicit software-impact review. Validate the exact suffix, temperature grade, pin mapping, and ordering code before substitution.
What is the best cross-brand equivalent for the EFM32ZG210F32-QFN32T?
No cross-brand drop-in equivalent can be recommended confidently from the available technical information. A cross-manufacturer MCU replacement must preserve the QFN-32 land pattern, power pins, debug interface, clock setup, analog functions, and peripheral mapping, while also matching the 32 KB Flash and 4 KB RAM requirements. Generic cross-reference listings do not establish that level of compatibility, so the manufacturer pinout and firmware constraints remain the controlling criteria.
Is the EFM32ZG210F32-QFN32T the same as the EFM32TG210F32-QFN32T?
No. The EFM32ZG210F32-QFN32T uses a 24 MHz ARM Cortex-M0+ core, while the EFM32TG210 series is associated with the higher-performance Cortex-M3 architecture. Their similar memory-size codes and QFN-32 package naming do not establish software or hardware drop-in compatibility. A replacement must be checked for processor instruction set, interrupt behavior, peripheral implementation, clock tree, pin assignments, and firmware dependencies.
EFM32ZG210F32-QFN32T vs EFM32ZG210F8-QFN32T — which is better for firmware-heavy applications?
The EFM32ZG210F32-QFN32T is better for firmware-heavy applications because it provides 32 KB of Flash compared with 8 KB for the EFM32ZG210F8-QFN32T. Both belong to the 24 MHz Zero Gecko platform and can support a similar hardware role, but the 8 KB version may require code optimization, removal of diagnostic code, or a different bootloader. The extra 24 KB of Flash substantially reduces software capacity risk.
Where to buy the EFM32ZG210F32-QFN32T online?
Use the Request a Quote form on this page to request the EFM32ZG210F32-QFN32T with the required quantity, package form, and shipment destination. The form is the appropriate route for current commercial availability, volume pricing, and lead-time confirmation without publishing stale pricing information. Include the target date, reel quantity, and whether samples or production quantities are needed so the request can be evaluated accurately.
What is the price and lead time for the EFM32ZG210F32-QFN32T?
Current price and lead time for the EFM32ZG210F32-QFN32T are obtained through the Request a Quote form on this page. The form allows the required quantity, reel packaging, target date, and delivery destination to be stated directly. Include an annual forecast if planning for multi-year production, and request separate dates for evaluation samples and production quantities.
Is the EFM32ZG210F32-QFN32T in stock?
Current EFM32ZG210F32-QFN32T stock status should be confirmed through the Request a Quote form on this page. Include the required reel quantity and desired delivery date in the request. For production planning, distinguish immediate availability from scheduled allocation and ask for a shipment schedule covering both prototypes and recurring production demand.

Données de référence d'ingénierie pour EFM32ZG210F32-QFN32T — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the EFM32ZG210F32-QFN32T when a compact, energy-sensitive design needs a 24 MHz ARM Cortex-M0+ controller with 32 KB of Flash, 4 KB of RAM, and a QFN-32 footprint. It is a strong fit for battery sensors, industrial monitors, and lightweight IoT endpoints where Stop-mode current can be as low as 0.5 µA. Select EFM32ZG210F32-QFN32 or EFM32ZG210F32-B-QFN32R when the ordering suffix represents the required grade or packaging form. Consider EFM32ZG210F8-QFN32T only after confirming that 8 KB of Flash is sufficient, because the 24 KB reduction can require significant firmware changes. Do not use the EFM32TG family as a drop-in substitute: although some versions use QFN-32 packages, the Cortex-M3 core and peripheral implementation require a dedicated hardware and software review.

Comparaison avec les alternatives

Paramètre Ce produit EFM32ZG210F32-QFN32 EFM32ZG210F32-B-QFN32R EFM32ZG210F8-QFN32T
Package QFN-32 (6 mm x 6 mm) QFN-32 (6 mm x 6 mm) QFN-32 (6 mm x 6 mm) QFN-32 (6 mm x 6 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs

Principaux différenciateurs

  • Higher Flash capacity within the same QFN-32 Zero Gecko family (vs EFM32ZG210F8-QFN32T)
  • Direct 24 MHz Cortex-M0+ configuration (vs EFM32TG210F32-QFN32T)
  • Low-power operation with integrated control resources (vs EFM32TG210F8-D-QFN32R)

Notes de conception

Estimated: at 24 MHz, the family Run-mode figure of 114 µA/MHz corresponds to approximately 2.74 mA before peripheral and I/O contributions. Use that value for an initial active-current budget, then add radio, sensor, regulator-efficiency, and board-leakage effects. Select Stop mode only when its wake-up latency satisfies the application timing requirement.

Place input and output decoupling capacitors close to their associated supply and ground pins, keep the exposed-pad connection consistent with the manufacturer package drawing, and provide adequate ground-plane area around the QFN. Treat analog and communication traces as sensitive to switching-current paths; route them away from high-current edges and avoid sharing narrow return paths with noisy loads.

Do not assume that similarly named EFM32 devices are interchangeable. The EFM32ZG210F8-QFN32T has 8 KB of Flash rather than 32 KB, while EFM32TG devices use a different processor architecture. Validate core type, memory size, peripheral mapping, debug interface, pin assignments, package drawing, temperature grade, and shipping suffix before releasing a substitution.

Use the manufacturer pin-description and package-drawing documents as the controlling references for signal assignment and the PCB footprint. Check exposed-pad connection, thermal-via requirements, pin numbering orientation, and keepout areas before layout release. Do not infer a QFN-32 land pattern solely from its pin count because exposed-pad and thermal details can differ between device revisions.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for this exact orderable device.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

efm32zg210f32 qfn32 EFM32ZG210F32-QFN32T datasheet EFM32ZG210F32-QFN32T pinout EFM32ZG210F32-QFN32T datasheet pdf EFM32ZG210F32-QFN32T specifications EFM32ZG210F32-QFN32T equivalent EFM32ZG210F32-QFN32T replacement EFM32ZG210F32-QFN32T footprint EFM32ZG210F32-QFN32T price EFM32ZG210F32-QFN32T stock Silicon Labs EFM32ZG210F32-QFN32T EFM32ZG210F32 vs EFM32TG210F32

Composants & termes associés

Silicon Labs EFM32ZG210F32-QFN32T EFM32ZG210F32-QFN32 EFM32ZG210F32-B-QFN32R EFM32ZG210F8-QFN32T EFM32TG210F32-QFN32T EFM32 Zero Gecko ARM Cortex-M0+ 32-bit RISC microcontroller embedded microcontroller microcontroller semiconductor QFN-32 QFN package family surface-mount package 32 KB Flash 4 KB RAM 24 MHz CPU clock ADC AES 114 µA/MHz Run mode 0.5 µA Stop mode 24 digital I/O pins battery-powered embedded systems
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ