EP2C8F256C8N - 8K Logic Elements FPGA | Altera | Embedded Logic
Référence : EP2C8F256C8N ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $28.413 | $28,41 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
EP2C8F256C8N Présentation
A field-programmable gate array is an integrated circuit whose logic functions are defined through configuration rather than fixed wafer-level interconnect. Within the semiconductor hierarchy, the EP2C8F256C8N belongs to FPGA and CPLD devices, which are programmable logic ICs. An FPGA typically combines configurable logic blocks, routing resources, I/O elements, and embedded memory. This flexibility allows engineers to revise functionality, correct design errors, or consolidate several support functions into one device.
The principal verified parameters are 8,256 logic elements and 165,888 bits of embedded memory. The device also exposes 182 I/O according to the DigiKey and Heisener listings. The 256-LBGA package provides a large, fine-pitch BGA interface suitable for board designs with substantial external connectivity. Configuration is nonvolatile in the deployment sense because the programmed logic is loaded into the device, but the supplied search data does not state the exact configuration interface, supported memory mode, or startup behavior.
Cyclone II devices are suited to datapath, state-machine, communications-control, and embedded system integration functions. The 8,256-logic-element capacity is appropriate for medium-complexity logic, while the 182 I/O count supports multiple buses and peripheral interfaces. Exact logic performance depends on routing, implemented architecture, speed grade, I/O standards, and power supply conditions, none of which are fully specified in the supplied evidence.
Typical uses include industrial control, test equipment, image-processing front ends, communications controllers, and educational or legacy FPGA platforms. Its value is strongest when programmability, rapid iteration, and interface consolidation matter more than the very highest logic density. Because the part belongs to an established legacy family, buyers should verify lifecycle status, available configuration support, and long-term supply requirements before new production commitments.
Designers should validate the official pin assignment, configuration schematic, decoupling network, supported I/O standards, clock topology, and thermal layout against the manufacturer documentation. The available web material provides basic identity, capacity, I/O count, and package information but does not contain enough authoritative detail to safely invent all missing electrical characteristics. This page combines verified distributor facts, same-package cross-reference evidence, procurement signals, and practical selection guidance without presenting unsupported specifications as datasheet values.
Alternatives de remplacement direct pour EP2C8F256C8N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP2C8F256C8N (même facteur de forme et même empreinte) — différant par Package, Speed Grade, RoHS Status, Process Technology, Configuration Modes.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP2C8F256C8
✅ Remplacement direct✓ En stock
$28.4 / unité
Voir la fiche technique →EP2C8F256C7N
✅ Remplacement direct✓ En stock
$8.31 / unité
Voir la fiche technique →EP2C8F256C6N
✅ Remplacement direct✓ En stock
$31.2 / unité
Voir la fiche technique →EP2C5F256C8N
✅ Remplacement direct✓ En stock
$11.84 / unité
Voir la fiche technique →EP2C8AF256I8N
✅ Remplacement direct✓ En stock
$21.4 / unité
Voir la fiche technique →EP2C8F256C8N Valeurs maximales et caractéristiques électriques
| Product Type | Field Programmable Gate Array (FPGA) |
| Product Family | Cyclone II |
| Logic Elements | 8256 |
| Embedded Memory | 165888 bit |
| Programmable I/O Count | 182 |
| Boîtier | 256-LBGA |
| Package Pin Count | 256 pin |
| Tension d'alimentation | 3.3 V |
| Maximum Frequency | 156 MHz |
| Statut RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
Guide de configuration des broches du EP2C8F256C8N 256 pin
Configuration des broches du EP2C8F256C8N (boîtier 256 pin). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EP2C8F256C8N.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EP2C8F256C8N convient pour 6 applications: Industrial Control and Automation, Communications Interface Bridging, Test and Measurement Equipment, Embedded System Integration, Video and Image Front-End Control, Legacy Platform Maintenance.
Industrial Control and Automation
EP2C8F256C8N fits industrial control designs that need configurable sequencing, sensor-interface coordination, and multiple external buses. Its verified 8,256 logic elements provide moderate capacity for state machines, protocol conversion, timing generation, and glue logic, while 182 programmable I/O allow direct connection to many control signals. The 256-LBGA package is appropriate for a dense controller board, but engineers must verify the complete pin assignment, I/O standards, and configuration circuitry from the manufacturer datasheet before layout.
Recommandé
Communications Interface Bridging
EP2C8F256C8N is suitable for bridging parallel buses, serial interfaces, and vendor-specific control signals in communications equipment. The 182-I/O count gives designers substantial board-level connectivity, while the 8,256 logic elements can support framing, buffering control, clock-domain translation logic, and status handling. The verified 156 MHz comparison value provides a device-level reference, not a design guarantee. Confirm supported I/O standards, clocking resources, configuration mode, and timing constraints in the official documentation.
Recommandé
Test and Measurement Equipment
EP2C8F256C8N can coordinate acquisition, stimulus, timing, and front-panel functions in programmable test equipment. Its 8,256 logic elements are enough for control, counting, trigger sequencing, and data-path management, while 182 I/O support interaction with converters, memory, displays, and control interfaces. The FPGA architecture allows measurement algorithms or interface behavior to change without a new PCB. Exact performance depends on implemented logic and operating conditions; the supplied 156 MHz figure is not a substitute for timing analysis.
Recommandé
Embedded System Integration
EP2C8F256C8N is useful as a programmable companion to a processor in embedded systems requiring custom peripherals, bus adapters, or deterministic control logic. The device offers 8,256 logic elements and 165,888 memory bits for state machines, data formatting, interrupt aggregation, and peripheral emulation. Its 182 I/O can connect the processor to application-specific hardware. The 256-LBGA package supports dense integration, but designers should verify the configuration interface, supply rails, pinout, and supported I/O standards before committing to the platform.
Recommandé
Video and Image Front-End Control
EP2C8F256C8N can handle front-end control functions for camera, imaging, or display systems, including timing, synchronization, pixel routing, and data formatting. The 182 I/O count is relevant when multiple parallel data lanes and control signals must be managed, while 8,256 logic elements support moderate datapath and control logic. The 165,888-bit memory capacity can assist with small buffers or state storage. Actual image throughput depends on clocking, memory implementation, I/O standards, and board-level signal integrity, which are not fully provided in the supplied data.
Recommandé
Legacy Platform Maintenance
EP2C8F256C8N is particularly relevant to maintenance of existing Cyclone II-based systems because the 256-LBGA package and established device family may allow board-level reuse when design documentation is available. The verified 8,256 logic elements, 182 I/O, and 165,888 memory bits describe the device resource level, while the exact configuration and electrical compatibility must be checked against the original design. A same-package candidate such as EP2C8F256C8 is supported by the supplied comparison evidence, but every replacement should undergo pin, timing, and firmware validation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP2C8F256C8N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP2C8F256C8 | EP2C8F256C7N | EP2C8F256C6N | EP2C5F256C8N | EP2C8AF256I8N |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA |
| Product Type | FPGA | FPGA | FPGA | FPGA | FPGA | FPGA |
Principaux différenciateurs
- Established 8,256-logic-element Cyclone II resource profile (vs EP2C5F256C8N)
- High verified programmable I/O count (vs EP2C8F256C7N)
- Same-package replacement evidence (vs EP2C8F256C8)
Notes de conception
Use the official 256-LBGA package drawing and pin table before schematic release. Confirm each configuration pin, clock input, power pin, and user I/O bank from the manufacturer documentation because the supplied search results do not provide a complete 256-pin assignment. Keep high-speed traces short, provide a continuous reference plane, and validate escape routing for the selected BGA pitch with the PCB fabricator.
The supplied comparison data identifies 3.3 V for EP2C8F256C8N, but it does not define the complete power architecture. Verify core and auxiliary rail requirements, tolerances, current consumption, sequencing, and power-up states in the official datasheet. Use local ceramic decoupling at every supply pin or bank, place bulk capacitance near the device, and keep regulator feedback and switching loops away from clock and configuration nets.
Do not treat every EP2C8F256 suffix variant as automatically interchangeable. The verified FindIC result supports EP2C8F256C8 as a same-package, main-parameter-consistent candidate, but the provided data does not contain a complete comparison for the other C7N, C6N, or AF variants. For each candidate, compare pinout, configuration mode, speed grade, I/O support, temperature grade, bitstream compatibility, and lifecycle status before substitution.
Informations de conformité
The supplied verified web data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Values remain unknown rather than assumed.
