EP4CE15F17I8LN - 15,408-Cell Industrial FPGA | Altera
Référence : EP4CE15F17I8LN ✓ ActifEP4CE15F17I8LN Présentation
A field-programmable gate array is a digital semiconductor whose configurable logic, interconnect, and I/O resources are programmed after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Cyclone IV E family occupies the middle ground between simple programmable logic and larger FPGAs, providing enough logic capacity for parallel control, protocol handling, data acquisition, and modest image-processing pipelines.
The EP4CE15F17I8LN provides 15,408 logic elements and 47 logic blocks in a 256-pin FBGA package. Its 165 I/O support interfaces with external memory and peripheral devices, while the 1.2 V core specification aligns it with modern low-voltage digital design practices. The ordering code identifies the F17 device configuration, an industrial temperature option, and an 8 speed grade; confirm the exact limits and configuration requirements against the manufacturer ordering information before release.
As a configurable device, the EP4CE15F17I8LN shifts logic development into the FPGA configuration file rather than a custom mask set. This allows field updates, product-family consolidation, and reuse of the same PCB across several firmware variants. The 60 nm process also reflects the architecture generation and should be considered when comparing operating conditions, power behavior, and availability with newer FPGA families.
Typical uses include industrial controllers, network interface equipment, instrumentation, video and image-processing front ends, embedded storage systems, and low-latency signal-processing modules. Its 165 I/O make it appropriate for systems combining multiple buses, converters, and external memory devices. Designers should use the Cyclone IV device family's pin and power guidance rather than relying on generic BGA layout conventions.
A critical integration requirement is decoupling of the core and I/O supplies. Place the recommended bulk and high-frequency capacitors directly beside their associated power and ground balls, maintain continuous ground-plane coverage beneath the BGA, and follow the manufacturer escape-routing and via-array guidance. Configuration pins, clock inputs, and high-speed signals also require controlled impedance and short return paths.
This page organizes the orderable device information with package and interface details, verified manufacturer and distributor references, same-family drop-in candidates, comparison parameters, and practical PCB guidance. It is intended to accelerate schematic review, PCB planning, sourcing, and second-stage design verification without replacing the complete device documentation.
Alternatives de remplacement direct pour EP4CE15F17I8LN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
EP4CE15F17C8LN
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →EP4CE15F17C9LN
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →EP4CE15F17I7LN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EP4CE15F17I9LN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EP4CE15F17C7LN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EP4CE15F17I8LN Valeurs maximales et caractéristiques électriques
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone IV E |
| Device Designation | EP4CE15 (F17) |
| Logic Elements | 15,408 |
| Logic Blocks | 47 |
| Embedded Memory | 516,096 bits |
| I/O Count | 165 I/O |
| Core Supply Voltage | 1.2 V |
| Process Technology | 60 nm |
| Boîtier | 256-pin FBGA |
| Package Type | 256-LBGA / 256-pin TFBGA |
| Device Family | EP4CE15 |
| Speed Grade | Grade 8 |
| Temperature Grade | Industrial grade |
| Type de montage | Surface Mount |
Guide de configuration des broches du EP4CE15F17I8LN 256-lbga / 256-pin tfbga
Configuration des broches du EP4CE15F17I8LN (boîtier 256-lbga / 256-pin tfbga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EP4CE15F17I8LN.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EP4CE15F17I8LN convient pour 6 applications: Industrial Control and Automation, Communications and Network Interface, Signal Processing and Data Acquisition, Video and Image Processing Front Ends, Embedded Storage and Interface Consolidation, Test and Measurement Instrumentation.
Industrial Control and Automation
The EP4CE15F17I8LN fits industrial controllers that coordinate sensors, actuators, motion blocks, and safety-adjacent logic in one programmable device. Its 15,408 logic elements and 47 logic blocks provide substantially more parallel processing capacity than a small CPLD, while 165 I/O allow multiple converters, communication ports, and discrete controls to share a common device. The industrial-temperature ordering option is appropriate for equipment operating across extended ambient conditions, subject to the exact manufacturer limits. In a typical controller, the FPGA performs timing, state management, interlocks, and data acquisition while a processor handles higher-level tasks. Using the same device for both reduces component count, but designers should reserve timing margin for routing congestion and verify the complete power budget after synthesis.
Recommandé
Communications and Network Interface
The EP4CE15F17I8LN is suitable for interface and protocol-processing modules that must combine parallel logic with numerous external connections. With 15,408 logic elements and 165 I/O, it can support framing, packet buffering, clock-domain crossing, status generation, and host-facing interfaces in a single FPGA. The 1.2 V core supply supports integration with contemporary low-voltage logic, while the 256-pin FBGA provides a direct connection path to converters, transceivers, and memory. Designers should use the device-family timing reports to establish achievable clock rates, as actual performance depends on logic placement and routing. The principal design trade-off is that the 60 nm Cyclone IV E architecture may require more careful partitioning than newer FPGA families when very high line rates or large parallel fabrics are required.
Recommandé
Signal Processing and Data Acquisition
The EP4CE15F17I8LN can implement parallel signal-processing and data-acquisition functions when a design requires deterministic logic rather than a high-performance microprocessor. The 47 logic blocks and 15,408 logic elements are useful for filtering, correlation, counting, thresholding, sampling control, and formatting data from external converters. Its 165 I/O provide practical fan-out for converter outputs, capture clocks, triggers, and status signals. A typical signal chain would use the FPGA to sample or condition converter data, perform parallel arithmetic, and transfer results through a separate communication interface. Because resource sharing and routing can affect maximum clock frequency, timing closure should be performed for the actual extracted design rather than inferred from the logic-element count alone.
Recommandé
Video and Image Processing Front Ends
The EP4CE15F17I8LN can serve as a video or image-processing front end for systems that need programmable pixel pipelines, color processing, or interface adaptation. Its 15,408 logic elements provide useful parallel capacity for moderate-resolution preprocessing, while 165 I/O can connect image sensors, display timing circuits, and parallel interface transceivers. The device can also bridge a source-specific video interface to a simpler downstream bus without requiring a dedicated bridge ASIC. In implementation, the key trade-off is fabric utilization: wide datapaths and line buffers may consume substantial memory and routing resources, so the design should be profiled after synthesis. The industrial ordering option is useful when the module operates in equipment with a broad ambient-temperature range, provided the complete system qualification covers the final environment.
Recommandé
Embedded Storage and Interface Consolidation
The EP4CE15F17I8LN is well suited to consolidating legacy memory and peripheral interfaces in embedded systems. Its 165 I/O can accommodate external memory buses, data converters, parallel buses, and supervisory signals, while 15,408 logic elements implement controllers, arbitration, buffering, and command translation. A common arrangement places an external processor beside the FPGA, with the processor issuing high-level commands and the FPGA servicing deterministic bus transactions. This can preserve an existing board architecture while reducing the number of dedicated interface controllers. Engineers must verify supported memory-interface performance, pin multiplexing, and voltage compatibility against the exact device documentation. The 256-pin FBGA also demands careful escape routing, so the package stack-up and ball assignment must be frozen before high-volume PCB fabrication.
Recommandé
Test and Measurement Instrumentation
The EP4CE15F17I8LN can coordinate timing, sequencing, pattern generation, and acquisition logic in modular test and measurement equipment. Its parallel fabric is useful for deterministic stimulus generation and response checking, while 165 I/O supports instrument-control logic, trigger distribution, and converter interfaces. A practical instrument may use the FPGA to execute sequencing tables, interface with an embedded controller, and provide deterministic digital stimulus to the device under test. The 1.2 V core and 60 nm process should be included in the overall power, thermal, and long-term reliability plan because utilization depends on the programmed design. For laboratory-grade timing accuracy, use dedicated clock resources and carefully control board skew; the logical-cell count alone does not determine the achievable measurement bandwidth.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP4CE15F17I8LN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP4CE15F17C8LN | EP4CE15F17C9LN | EP4CE15F17I7LN | EP4CE15F17I9LN | EP4CE15F17C7LN |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA | 256-pin FBGA |
| FPGA Family | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Device Configuration | EP4CE15 (F17) | EP4CE15 (F17) | EP4CE15 (F17) | EP4CE15 (F17) | EP4CE15 (F17) | EP4CE15 (F17) |
| Logic Elements | 15,408 | 15,408 | 15,408 | 15,408 | 15,408 | 15,408 |
| Logic Blocks | 47 | 47 | 47 | 47 | 47 | 47 |
| I/O Count | 165 I/O | 165 I/O | 165 I/O | 165 I/O | 165 I/O | 165 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 60 nm | 60 nm | 60 nm | 60 nm | 60 nm | 60 nm |
| Speed Grade | Grade 8 | Grade 8 | Grade 9 | Grade 7 | Grade 9 | Grade 7 |
| Temperature Grade | Industrial grade | Commercial grade | Commercial grade | Industrial grade | Industrial grade | Commercial grade |
Principaux différenciateurs
- Industrial-temperature option within the same EP4CE15 F17 family (vs EP4CE15F17C8LN)
- Grade 8 timing option in a 256-pin FBGA (vs EP4CE15F17I7LN)
- Industrial grade with grade 8 operation (vs EP4CE15F17C7LN)
Notes de conception
Treat the 256-pin FBGA as a high-density escape-routing problem. Use the manufacturer BGA land pattern and via-in-pad or via-array guidance for the selected PCB stack-up, maintain uninterrupted ground planes beneath the device, and route clock, configuration, and high-speed I/O nets before general-purpose signals. Confirm pad and antipad dimensions with the package drawing rather than the generic BGA-256 illustration.
Partition the 1.2 V core and applicable I/O supplies according to the manufacturer power architecture. Place the prescribed bulk capacitance and high-frequency decoupling directly at the relevant supply and ground balls, and use separate filtering paths for noisy external sources. Validate the regulator set points, sequencing, load current, ripple, and startup behavior with the actual power design rather than relying only on average logic utilization.
Estimate dissipation from the Quartus power report using realistic switching activity, clock rates, I/O loads, and the selected speed grade. The 60 nm EP4CE15 architecture and grade 8 operation determine the device's operating characteristics, while PCB construction and airflow determine junction-temperature rise. Re-run the estimate after route completion and reserve copper area for thermal improvement if the temperature target has limited margin.
Do not approve a same-footprint alternative solely from the BGA outline. Verify the exact F17 pin table, speed grade, temperature range, configuration behavior, supply limits, and power characteristics. Commercial-grade alternatives may fail an industrial ambient requirement, while grade 7 or grade 9 alternatives can change timing and power behavior. Complete timing analysis and board-level validation before substituting any ordering code.
Informations de conformité
The available product and distributor records do not state the requested compliance statuses. Obtain current material and environmental declarations for the exact ordering part number before regulatory reporting.