Altera

EP4CE15F17I8LN - 15,408-Cell Industrial FPGA | Altera

MPN: EP4CE15F17I8LN ✓ Aktif
1.2 V Vdss 256-pin FBGA Package Grade 8 Speed 516,096 bits Memory
MOQ: 1 |

EP4CE15F17I8LN Ringkasan

The Altera EP4CE15F17I8LN is a Cyclone IV E field-programmable gate array with 15,408 logic elements, 165 I/O, and a 1.2 V supply in a 256-pin FBGA package. It combines a 60 nm FPGA process with 47 logic blocks, making it suitable for compact embedded control, communications, signal-processing, and industrial systems where programmable logic provides flexibility without the complexity of an application-specific integrated circuit.

A field-programmable gate array is a digital semiconductor whose configurable logic, interconnect, and I/O resources are programmed after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Cyclone IV E family occupies the middle ground between simple programmable logic and larger FPGAs, providing enough logic capacity for parallel control, protocol handling, data acquisition, and modest image-processing pipelines.

The EP4CE15F17I8LN provides 15,408 logic elements and 47 logic blocks in a 256-pin FBGA package. Its 165 I/O support interfaces with external memory and peripheral devices, while the 1.2 V core specification aligns it with modern low-voltage digital design practices. The ordering code identifies the F17 device configuration, an industrial temperature option, and an 8 speed grade; confirm the exact limits and configuration requirements against the manufacturer ordering information before release.

As a configurable device, the EP4CE15F17I8LN shifts logic development into the FPGA configuration file rather than a custom mask set. This allows field updates, product-family consolidation, and reuse of the same PCB across several firmware variants. The 60 nm process also reflects the architecture generation and should be considered when comparing operating conditions, power behavior, and availability with newer FPGA families.

Typical uses include industrial controllers, network interface equipment, instrumentation, video and image-processing front ends, embedded storage systems, and low-latency signal-processing modules. Its 165 I/O make it appropriate for systems combining multiple buses, converters, and external memory devices. Designers should use the Cyclone IV device family's pin and power guidance rather than relying on generic BGA layout conventions.

A critical integration requirement is decoupling of the core and I/O supplies. Place the recommended bulk and high-frequency capacitors directly beside their associated power and ground balls, maintain continuous ground-plane coverage beneath the BGA, and follow the manufacturer escape-routing and via-array guidance. Configuration pins, clock inputs, and high-speed signals also require controlled impedance and short return paths.

This page organizes the orderable device information with package and interface details, verified manufacturer and distributor references, same-family drop-in candidates, comparison parameters, and practical PCB guidance. It is intended to accelerate schematic review, PCB planning, sourcing, and second-stage design verification without replacing the complete device documentation.

Alternatif penggantian untuk EP4CE15F17I8LN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

EP4CE15F17C8LN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Altera
📦 256-pin FBGA
Field-Programmable Gate Array (FPGA) · Cyclone IV E · 15,408 elements · 504 Kb · 165 I/O · 256-pin FBGA, 17 mm × 17 mm · 1.2 V · 60 nm

Kontak untuk harga

Lihat Datasheet →

EP4CE15F17C9LN

✅ Drop-In
Altera
📦 256-pin FBGA
FPGA · Cyclone IV E · 47 · 47 · 1.2 V · FBGA-256 · F17 · 256 pins

Kontak untuk harga

Lihat Datasheet →

EP4CE15F17I7LN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 256-pin FBGA
Industrial-temperature grade retained, but speed grade changes from 8 to 7

📋 Alternatif referensi (tidak dalam katalog)

EP4CE15F17I9LN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 256-pin FBGA
Industrial-temperature grade retained with a grade 9 speed option instead of grade 8

📋 Alternatif referensi (tidak dalam katalog)

EP4CE15F17C7LN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 256-pin FBGA
Commercial-temperature grade and grade 7 speed option instead of industrial-temperature grade 8

📋 Alternatif referensi (tidak dalam katalog)

EP4CE15F17I8LN Rating Maksimal & Karakteristik Listrik

Device Type Field-Programmable Gate Array (FPGA)
FPGA Family Cyclone IV E
Device Designation EP4CE15 (F17)
Logic Elements 15,408
Logic Blocks 47
Embedded Memory 516,096 bits
I/O Count 165 I/O
Core Supply Voltage 1.2 V
Process Technology 60 nm
Paket 256-pin FBGA
Package Type 256-LBGA / 256-pin TFBGA
Device Family EP4CE15
Speed Grade Grade 8
Temperature Grade Industrial grade
Tipe Mounting Surface Mount

EP4CE15F17I8LN 256-lbga / 256-pin tfbga Diamant Konfigurasi Panduan

Konfigurasi pin untuk EP4CE15F17I8LN (256-lbga / 256-pin tfbga pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 256-lbga / 256-pin tfbga untuk EP4CE15F17I8LN

Tidak ada data diatribut pin yang tersedia untuk EP4CE15F17I8LN.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

EP4CE15F17I8LN cocok untuk 6 aplikasis: Industrial Control and Automation, Communications and Network Interface, Signal Processing and Data Acquisition, Video and Image Processing Front Ends, Embedded Storage and Interface Consolidation, Test and Measurement Instrumentation.

🏭

Industrial Control and Automation

The EP4CE15F17I8LN fits industrial controllers that coordinate sensors, actuators, motion blocks, and safety-adjacent logic in one programmable device. Its 15,408 logic elements and 47 logic blocks provide substantially more parallel processing capacity than a small CPLD, while 165 I/O allow multiple converters, communication ports, and discrete controls to share a common device. The industrial-temperature ordering option is appropriate for equipment operating across extended ambient conditions, subject to the exact manufacturer limits. In a typical controller, the FPGA performs timing, state management, interlocks, and data acquisition while a processor handles higher-level tasks. Using the same device for both reduces component count, but designers should reserve timing margin for routing congestion and verify the complete power budget after synthesis.

🌐

Communications and Network Interface

The EP4CE15F17I8LN is suitable for interface and protocol-processing modules that must combine parallel logic with numerous external connections. With 15,408 logic elements and 165 I/O, it can support framing, packet buffering, clock-domain crossing, status generation, and host-facing interfaces in a single FPGA. The 1.2 V core supply supports integration with contemporary low-voltage logic, while the 256-pin FBGA provides a direct connection path to converters, transceivers, and memory. Designers should use the device-family timing reports to establish achievable clock rates, as actual performance depends on logic placement and routing. The principal design trade-off is that the 60 nm Cyclone IV E architecture may require more careful partitioning than newer FPGA families when very high line rates or large parallel fabrics are required.

📡

Signal Processing and Data Acquisition

The EP4CE15F17I8LN can implement parallel signal-processing and data-acquisition functions when a design requires deterministic logic rather than a high-performance microprocessor. The 47 logic blocks and 15,408 logic elements are useful for filtering, correlation, counting, thresholding, sampling control, and formatting data from external converters. Its 165 I/O provide practical fan-out for converter outputs, capture clocks, triggers, and status signals. A typical signal chain would use the FPGA to sample or condition converter data, perform parallel arithmetic, and transfer results through a separate communication interface. Because resource sharing and routing can affect maximum clock frequency, timing closure should be performed for the actual extracted design rather than inferred from the logic-element count alone.

📺

Video and Image Processing Front Ends

The EP4CE15F17I8LN can serve as a video or image-processing front end for systems that need programmable pixel pipelines, color processing, or interface adaptation. Its 15,408 logic elements provide useful parallel capacity for moderate-resolution preprocessing, while 165 I/O can connect image sensors, display timing circuits, and parallel interface transceivers. The device can also bridge a source-specific video interface to a simpler downstream bus without requiring a dedicated bridge ASIC. In implementation, the key trade-off is fabric utilization: wide datapaths and line buffers may consume substantial memory and routing resources, so the design should be profiled after synthesis. The industrial ordering option is useful when the module operates in equipment with a broad ambient-temperature range, provided the complete system qualification covers the final environment.

🖥️

Embedded Storage and Interface Consolidation

The EP4CE15F17I8LN is well suited to consolidating legacy memory and peripheral interfaces in embedded systems. Its 165 I/O can accommodate external memory buses, data converters, parallel buses, and supervisory signals, while 15,408 logic elements implement controllers, arbitration, buffering, and command translation. A common arrangement places an external processor beside the FPGA, with the processor issuing high-level commands and the FPGA servicing deterministic bus transactions. This can preserve an existing board architecture while reducing the number of dedicated interface controllers. Engineers must verify supported memory-interface performance, pin multiplexing, and voltage compatibility against the exact device documentation. The 256-pin FBGA also demands careful escape routing, so the package stack-up and ball assignment must be frozen before high-volume PCB fabrication.

🔧

Test and Measurement Instrumentation

The EP4CE15F17I8LN can coordinate timing, sequencing, pattern generation, and acquisition logic in modular test and measurement equipment. Its parallel fabric is useful for deterministic stimulus generation and response checking, while 165 I/O supports instrument-control logic, trigger distribution, and converter interfaces. A practical instrument may use the FPGA to execute sequencing tables, interface with an embedded controller, and provide deterministic digital stimulus to the device under test. The 1.2 V core and 60 nm process should be included in the overall power, thermal, and long-term reliability plan because utilization depends on the programmed design. For laboratory-grade timing accuracy, use dedicated clock resources and carefully control board skew; the logical-cell count alone does not determine the achievable measurement bandwidth.

Ringkasan Produk Direkomendasikan

EP4CE15F17C8LN Altera Digunakan di dalam: Industrial Control and Automation, Video and Image Processing Front Ends EP4CE15F17I9LN Same-family industrial FPGA with a higher speed option Digunakan di dalam: Industrial Control and Automation, Signal Processing and Data Acquisition, Video and Image Processing Front Ends EP4CE15F17C9LN Altera Digunakan di dalam: Communications and Network Interface, Embedded Storage and Interface Consolidation EP4CE15F17I7LN Same-package industrial FPGA for lower-speed interface designs Digunakan di dalam: Communications and Network Interface, Test and Measurement Instrumentation EP4CE15F17I8LN Altera Digunakan di dalam: Signal Processing and Data Acquisition, Test and Measurement Instrumentation EP4CE15F17C7LN Same-family lower-speed option for non-critical control paths Digunakan di dalam: Embedded Storage and Interface Consolidation
What is the EP4CE15F17I8LN?
The EP4CE15F17I8LN is an Altera Cyclone IV E FPGA with 15,408 logic elements, 47 logic blocks, 165 I/O, and a 1.2 V core supply in a 256-pin FBGA package. The Altera product page identifies it as the EP4CE15 F17 industrial-temperature ordering variant. It is intended for programmable control, communications, signal processing, and embedded systems requiring a moderate amount of configurable logic.
How many logic elements and I/O does the EP4CE15F17I8LN have?
The EP4CE15F17I8LN contains 15,408 logic elements organized into 47 logic blocks and provides 165 I/O. Its embedded-memory figure is 516,096 bits. These figures are listed for the exact EP4CE15F17I8LN ordering part number, which helps distinguish it from other EP4CE15 configurations that can use different packages or device variants.
What package and core voltage are used by the EP4CE15F17I8LN?
The EP4CE15F17I8LN uses a 256-pin FBGA package and operates from a 1.2 V core supply. Listings describe the package as 256-LBGA or 256-pin TFBGA, reflecting the same ball-grid construction. The device is manufactured using a 60 nm FPGA process. Exact ball assignments and supply-rail requirements should be taken from the pin-description and power-management sections of the manufacturer documentation.
Where can I download the EP4CE15F17I8LN datasheet?
The official EP4CE15F17I8LN product page is the preferred starting point for the manufacturer datasheet and package-specific ordering information. It is located at the Altera URL shown on this page. The EP4CE15 Cyclone IV E documentation also supplies device-family architecture, configuration, pin, electrical, and BGA-layout information. Use the exact ordering code when checking package, speed, and temperature options.
Where can I find the EP4CE15F17I8LN pinout?
The EP4CE15F17I8LN pin assignment is found in the manufacturer datasheet's pin-description table for the 256-pin FBGA configuration. This page does not reproduce the complete 256-ball map because the manufacturer listing does not expose individual ball names or numbers. When assigning PCB nets, use the ordering-code-specific pin table and cross-check the BGA escape-routing requirements rather than inferring connections from a generic package drawing.
What is the best drop-in replacement for the EP4CE15F17I8LN?
The closest drop-in candidates are EP4CE15F17C8LN, EP4CE15F17C9LN, EP4CE15F17I7LN, and EP4CE15F17I9LN because they retain the EP4CE15 F17 device configuration and 256-pin FBGA footprint while changing speed or temperature ordering options. Confirm that the replacement's speed grade, temperature range, pin table, and configuration compatibility meet the original system requirements before approving a substitution.
Can EP4CE15F17C9LN replace the EP4CE15F17I8LN?
EP4CE15F17C9LN can be a same-footprint alternative for the EP4CE15F17I8LN because both belong to the EP4CE15 F17 configuration and use the 256-pin FBGA package. The principal differences are the ordering speed and temperature options, so it is not an unconditional substitute for an industrial-temperature design. Verify the required speed grade, ambient-temperature range, electrical limits, and configuration compatibility against the manufacturer documentation.
EP4CE15F17I8LN vs EP4CE15F17I9LN: which should I choose?
Choose the EP4CE15F17I8LN when the original design was released around grade 8 operation, and choose EP4CE15F17I9LN when the system specifically requires the faster grade 9 option while retaining the EP4CE15 F17 configuration and 256-pin FBGA footprint. Because speed grade affects timing performance and potentially power, the replacement must be revalidated against the original timing constraints and power budget.
When should I choose EP4CE15F17I8LN over a smaller FPGA?
Choose the EP4CE15F17I8LN when the design needs more than approximately 15,000 logic elements, 47 logic blocks, or 165 I/O for external interfaces. Its 256-pin FBGA provides substantial connectivity for buses, converters, memory, and control signals. A smaller FPGA may be preferable for simple sequential control, but it may force multiplexing, external logic, or a different package.
Is the EP4CE15F17I8LN suitable for industrial control systems?
The EP4CE15F17I8LN is an industrial-temperature ordering option with 15,408 logic elements and 165 I/O, making it suitable for many embedded industrial-control architectures. Its suitability depends on the required temperature span, timing, power dissipation, and environmental qualification of the completed product. The exact operating limits and qualification conditions should be confirmed in the manufacturer documentation.
What programming and configuration tools support the EP4CE15F17I8LN?
The EP4CE15F17I8LN is supported by the Altera Quartus tool flow for the Cyclone IV E device family, including device compilation, pin assignment, timing analysis, and configuration-file generation. Programming hardware must support the voltage and interface requirements of the selected configuration scheme. Verify the exact cable, board, and device-support combinations with Altera or Intel documentation before production use.
How much power does the EP4CE15F17I8LN dissipate?
The EP4CE15F17I8LN power consumption depends on core voltage, configured logic, I/O activity, speed grade, and operating temperature, so no single fixed dissipation value applies. The device has a 1.2 V core supply and belongs to a 60 nm Cyclone IV E family. Use Quartus power estimation and the manufacturer's power-estimation guidance with the intended design activity before sizing regulators and copper.
Is EP4CE15F17I8LN RoHS compliant?
The RoHS status of EP4CE15F17I8LN requires confirmation in the manufacturer's current product-compliance or material-declaration documentation. A package containing a lead-free ordering suffix does not by itself establish every regional substance restriction. For procurement and environmental reporting, obtain the declaration associated with the exact ordering part number rather than relying on a generic Cyclone IV E family statement.
Where to buy EP4CE15F17I8LN online?
Use the Request a Quote form on this page to request EP4CE15F17I8LN availability, current unit pricing, quantity breaks, and lead time. Include the required package code EP4CE15F17I8LN, production quantity, and target shipment date. The manufacturer and distributor records on this page are useful references for confirming the exact orderable configuration.
What is the price and lead time for the EP4CE15F17I8LN?
Submit an EP4CE15F17I8LN request through the Request a Quote form on this page for current pricing, stock confirmation, minimum order quantity, and lead time. Pricing and availability for this 256-pin FBGA FPGA can vary with quantity and sourcing conditions. The exact ordering code should appear on the request so the quote reflects the 60 nm Cyclone IV E device in its industrial temperature and grade 8 configuration.

Data referensi engineering untuk EP4CE15F17I8LN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the EP4CE15F17I8LN when the system needs the EP4CE15 F17 configuration with 15,408 logic elements, 47 logic blocks, 165 I/O, grade 8 operation, and an industrial-temperature ordering option in a 256-pin FBGA. Select EP4CE15F17C8LN when the same speed grade and footprint are sufficient but the required ambient range is commercial. Consider EP4CE15F17I9LN for industrial applications needing a faster option, or EP4CE15F17I7LN when the original timing target does not require grade 8 performance. EP4CE15F17C9LN and EP4CE15F17C7LN provide higher- and lower-speed commercial alternatives, respectively. In every case, verify the exact ball assignment, timing report, thermal requirements, configuration compatibility, and supply constraints before treating a candidate as a production replacement.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini EP4CE15F17C8LN EP4CE15F17C9LN EP4CE15F17I7LN EP4CE15F17I9LN EP4CE15F17C7LN
Brand Altera Altera Altera Altera Altera Altera
Package 256-pin FBGA 256-pin FBGA 256-pin FBGA 256-pin FBGA 256-pin FBGA 256-pin FBGA
FPGA Family Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E
Device Configuration EP4CE15 (F17) EP4CE15 (F17) EP4CE15 (F17) EP4CE15 (F17) EP4CE15 (F17) EP4CE15 (F17)
Logic Elements 15,408 15,408 15,408 15,408 15,408 15,408
Logic Blocks 47 47 47 47 47 47
I/O Count 165 I/O 165 I/O 165 I/O 165 I/O 165 I/O 165 I/O
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Process Technology 60 nm 60 nm 60 nm 60 nm 60 nm 60 nm
Speed Grade Grade 8 Grade 8 Grade 9 Grade 7 Grade 9 Grade 7
Temperature Grade Industrial grade Commercial grade Commercial grade Industrial grade Industrial grade Commercial grade

Diferensiator Kunci

  • Industrial-temperature option within the same EP4CE15 F17 family (vsEP4CE15F17C8LN)
  • Grade 8 timing option in a 256-pin FBGA (vsEP4CE15F17I7LN)
  • Industrial grade with grade 8 operation (vsEP4CE15F17C7LN)

Catatan Desain

Treat the 256-pin FBGA as a high-density escape-routing problem. Use the manufacturer BGA land pattern and via-in-pad or via-array guidance for the selected PCB stack-up, maintain uninterrupted ground planes beneath the device, and route clock, configuration, and high-speed I/O nets before general-purpose signals. Confirm pad and antipad dimensions with the package drawing rather than the generic BGA-256 illustration.

Partition the 1.2 V core and applicable I/O supplies according to the manufacturer power architecture. Place the prescribed bulk capacitance and high-frequency decoupling directly at the relevant supply and ground balls, and use separate filtering paths for noisy external sources. Validate the regulator set points, sequencing, load current, ripple, and startup behavior with the actual power design rather than relying only on average logic utilization.

Estimate dissipation from the Quartus power report using realistic switching activity, clock rates, I/O loads, and the selected speed grade. The 60 nm EP4CE15 architecture and grade 8 operation determine the device's operating characteristics, while PCB construction and airflow determine junction-temperature rise. Re-run the estimate after route completion and reserve copper area for thermal improvement if the temperature target has limited margin.

Do not approve a same-footprint alternative solely from the BGA outline. Verify the exact F17 pin table, speed grade, temperature range, configuration behavior, supply limits, and power characteristics. Commercial-grade alternatives may fail an industrial ambient requirement, while grade 7 or grade 9 alternatives can change timing and power behavior. Complete timing analysis and board-level validation before substituting any ordering code.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The available product and distributor records do not state the requested compliance statuses. Obtain current material and environmental declarations for the exact ordering part number before regulatory reporting.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

EP4CE15F17I8LN datasheet EP4CE15F17I8LN datasheet pdf EP4CE15F17I8LN pinout EP4CE15F17I8LN specifications EP4CE15F17I8LN equivalent EP4CE15F17I8LN replacement EP4CE15F17I8LN cross reference EP4CE15F17I8LN price Altera EP4CE15F17I8LN EP4CE15F17I8LN 256 FBGA EP4CE15F17I8LN 15408 logic cells EP4CE15F17I8LN vs EP4CE15F17I9LN EP4CE15F17I8LN industrial control EP4CE15F17I8LN programming

Komponen dan Istilah Terkait

Altera Intel EP4CE15F17I8LN EP4CE15F17C8LN EP4CE15F17C9LN EP4CE15F17I7LN EP4CE15F17I9LN EP4CE15F17C7LN Cyclone IV E Field-Programmable Gate Array FPGA Programmable Logic Device Semiconductor Logic Element Logic Block Embedded Memory I/O Core Supply Voltage 60 nm Process Technology 256-pin FBGA BGA-256 Quartus Industrial Control Signal Processing RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ