EP4SGX530HH35C2NES - 531K LE Stratix IV GX FPGA, 1152-FCBGA
Référence : EP4SGX530HH35C2NES ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4850 | $4 850,00 |
| 10 | $4620 | $46 200,00 |
| 100 | $4310 | $431 000,00 |
| 500 | $3995 | $1 997 500,00 |
| 1 000 | $3750 | $3 750 000,00 |
EP4SGX530HH35C2NES Présentation
A Field-Programmable Gate Array (FPGA) is a semiconductor device whose digital logic, interconnect, and I/O behavior are defined by user-supplied configuration data after manufacture. FPGAs sit at the top of the programmable-logic hierarchy - below them are CPLDs (smaller, non-volatile, glue-logic oriented) and above them are ASICs (volume-optimized fixed-function ICs). The Stratix IV GX family specifically combines high logic density with up to 24 transceivers supporting multi-gigabit serial protocols, positioning the device between pure logic-centric FPGAs and dedicated SerDes ASSPs.
Key features of this part include 531,200 logic elements, 28,033,024 bits of embedded memory, dedicated DSP blocks for fixed- and floating-point arithmetic, 8.5 Gbps-capable transceivers on Stratix IV GX, and a configuration controller supporting passive, active, and JTAG programming modes. The 1152-ball FCBGA package exposes 564 user I/Os with mixed-voltage support through banked I/O structures, and the flip-chip thermal interface enables sustained operation in space-constrained line cards.
Architecturally, the EP4SGX530HH35C2NES uses Adaptive Logic Modules (ALMs) feeding a hierarchical routing fabric, with M20K and MLAB memory blocks distributed column-wise, and variable-precision DSP blocks adjacent to those columns. Compared with the preceding Stratix III family, Stratix IV adds 8.5 Gbps transceivers and improved power management through hard PCIe Gen1/Gen2 IP blocks; compared with the successor Stratix V, the device trades lower power and higher transceiver rate (up to 14.1 Gbps) for the lower cost per logic element that the mature 40 nm process enables.
Typical applications include high-performance digital signal processing in defense radar and electronic-warfare systems, ASIC prototyping for networking ASICs, multi-gigabit serial backplane aggregation in telecom line cards, video broadcast infrastructure with on-chip transceivers, and high-throughput PCIe Gen2 endpoint designs. The device's combination of logic density and integrated transceivers lets designers replace multiple smaller FPGAs or a discrete SerDes plus FPGA pair with a single component.
When designing with this device, ensure the PCB supports the FCBGA's 1.0 mm ball pitch with matched-length impedance control for transceiver lanes, and provide a multi-rail power solution (typically 0.9 V core, 1.1 V PLL, 2.5 V/3.3 V I/O banks) with proper sequencing. Thermal management must consider that the flip-chip BGA draws heat primarily through the balls and PCB copper; a heatsink or thermal interface material is required for sustained full-operation workloads.
This page synthesizes distributor pricing for the EP4SGX530HH35C2NES, same-package Stratix IV GX alternatives from the Site MPN list, and practical design notes that complement - rather than duplicate - the manufacturer datasheet.
Alternatives de remplacement direct pour EP4SGX530HH35C2NES — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP4SGX530HH35C2NES (même facteur de forme et même empreinte) — différant par Package, Family, Speed Grade, Mounting Type, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP4SGX530HH35C2N
✅ Remplacement direct✓ En stock
$3500 / unité
Voir la fiche technique →EP4SGX530HH35C2
✅ Remplacement direct✓ En stock
$4500 / unité
Voir la fiche technique →EP4SGX360HF35C2N
✅ Remplacement direct✓ En stock
$3295 / unité
Voir la fiche technique →EP4SGX360HF35C2
✅ Remplacement direct✓ En stock
$9750 / unité
Voir la fiche technique →EP4SGX290NF45C2N
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EP4SGX530HH35C2NES Valeurs maximales et caractéristiques électriques
| Family | Stratix IV GX |
| Device Logic Elements | 531,200 |
| Logic Cells / Logic Blocks | 21248 (per FindIC summary) |
| Total Memory Bits | 28,033,024 |
| User I/O Count | 564 |
| Operating Voltage (Core) | 0.9 V |
| Process Technology | 40 nm |
| Boîtier | 1152-ball FC-HFBGA (Flip-Chip), 42.5 x 42.5 mm |
| Nombre de broches | 1152 |
| Internal Frequency (max) | 800 MHz |
| Température de fonctionnement | 0 C to 85 C (commercial) |
| Configuration Method | Passive / Active / JTAG |
| Type de montage | Surface Mount (BGA) |
Guide de configuration des broches du EP4SGX530HH35C2NES 1152-ball fc-hfbga (flip-chip), 42.5 x 42.5 mm
Configuration des broches du EP4SGX530HH35C2NES (boîtier 1152-ball fc-hfbga (flip-chip), 42.5 x 42.5 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EP4SGX530HH35C2NES.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EP4SGX530HH35C2NES convient pour 6 applications: Multi-Gigabit Serial Backplane Aggregation, ASIC Prototyping and Emulation, High-Throughput DSP for Radar and EW, PCIe Gen2 Endpoint and Bridge Designs, Broadcast Video Processing and Routing, Industrial High-Speed Test and Measurement.
Multi-Gigabit Serial Backplane Aggregation
The EP4SGX530HH35C2NES is well suited for multi-gigabit serial backplane aggregation in telecom line cards. With 8.5 Gbps-capable transceivers integrated alongside 531,200 logic elements, the device can terminate multiple SFP+/XFP links while running L2/L3 forwarding in fabric logic. The 0.9 V core and banked I/O structure simplify mixed-voltage PCB design where the backplane operates at 1.5 V or 1.8 V while control signals run at 2.5 V, and the 1152-ball FC-HFBGA provides the I/O count required to break out 24+ serial lanes plus parallel sideband signals.
Recommandé
ASIC Prototyping and Emulation
With 531,200 logic elements and 28,033,024 memory bits, the EP4SGX530HH35C2NES emulates mid-complexity ASICs on a single device. The Stratix IV GX architecture preserves timing fidelity to 28 nm ASIC targets, and Quartus Prime supports industry-standard synthesis flows (Synopsys Design Compiler, Mentor Questa) for ASIC netlist bring-up. The 1152-ball FC-HFBGA exposes sufficient I/O to break out full-duplex buses between FPGA domains when multiple boards are stacked, which is critical for sub-system emulation at clock speeds approaching the production ASIC rate.
Recommandé
High-Throughput DSP for Radar and EW
The EP4SGX530HH35C2NES delivers the DSP block count and memory bandwidth required for defense radar and electronic-warfare signal processing. Embedded variable-precision DSP blocks run fixed-point FFTs and pulse-Doppler processing at hundreds of MSPS, and M20K memory blocks stage coefficients and intermediate vectors at line rate. Operating over the commercial 0 C to 85 C range, the part suits ground-based and shipboard installations; for airborne platforms the I-grade variant would be required instead of the C2 commercial bin.
Recommandé
PCIe Gen2 Endpoint and Bridge Designs
The Stratix IV GX hard PCIe Gen1/Gen2 IP blocks integrated into the EP4SGX530HH35C2NES simplify endpoint and bridge designs for storage controllers, frame grabbers, and high-speed data-acquisition cards. Combined with 564 user I/O for parallel sensor interfaces and 8.5 Gbps transceivers for external serial links, the device can simultaneously serve a PCIe x8 link and several SFP+ side channels. The flip-chip BGA delivers the thermal headroom needed for sustained x8 Gen2 traffic at 5 GTps in compact card form factors.
Recommandé
Broadcast Video Processing and Routing
Broadcast video routers and frame synchronizers benefit from the EP4SGX530HH35C2NES's combination of high logic density, M20K memory for line buffers, and multi-gigabit transceivers for SDI over coax (3G-SDI / 6G-SDI / 12G-SDI) or 10GbE IP-based video. A single device can ingest, frame-sync, and re-route multiple 12G-SDI streams while leaving logic headroom for up/down/cross conversion. The 564 user I/O support HDMI/DisplayPort side-channel control planes in mixed-signal broadcast equipment without requiring an external bridge chip.
Recommandé
Industrial High-Speed Test and Measurement
The EP4SGX530HH35C2NES is a strong fit for high-channel-count oscilloscopes, logic analyzers, and protocol exercisers where 564 user I/O enable wide parallel capture buses while the 8.5 Gbps transceivers handle serial protocol decode. The 28 Mb of embedded memory supports deep acquisition buffers, and the variable-precision DSP blocks accelerate on-FPGA FFT and eye-diagram analysis. The 1152-ball FC-HFBGA's thermal performance sustains continuous 100% utilization in fan-cooled benchtop instruments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP4SGX530HH35C2NES — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP4SGX530HH35C2N | EP4SGX530HH35C2 | EP4SGX360HF35C2N | EP4SGX360HF35C2 | EP4SGX290NF45C2N |
|---|---|---|---|---|---|---|
| Package | 1152-ball FC-HFBGA (42.5 x 42.5 mm) | 1152-ball FC-HFBGA - same | 1152-ball FC-HFBGA - same | 1152-ball FC-HFBGA - same | 1152-ball FC-HFBGA - same | 1152-ball FC-HFBGA family - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Logic Elements | 531,200 | 531,200 (100%) | 531,200 (100%) | 360,000 (-32%) | 360,000 (-32%) | 290,000 (-45%) |
| Core Voltage | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V |
| Speed Grade | C2 (commercial) | C2 | C2 | C2 | C2 | C2 |
| Temperature Range | 0 C to 85 C (commercial) | 0 C to 85 C | 0 C to 85 C | 0 C to 85 C | 0 C to 85 C | 0 C to 85 C |
| Ordering Code Status | ES (engineering sample) | Production | Production | Production | Production | Production |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
Principaux différenciateurs
- Highest-density Stratix IV GX option in the same 1152-ball FC-HFBGA (vs EP4SGX360HF35C2N)
- Direct ordering-code upgrade path to factory-traced production (vs EP4SGX530HH35C2N)
- Integrated 8.5 Gbps transceivers reduce BOM cost (vs Cyclone IV GX EP4CGX75CF23C7)
Notes de conception
Estimated: a Stratix IV GX device at 0.9 V core with 531,200 LEs and 8.5 Gbps transceivers running typical workloads draws approximately 8-15 W core current, peaking near 20 W during full-utilization benchmarks. Plan a 0.9 V regulator rated at least 25 A with 1.1 V PLL and 2.5 V/3.3 V bank rails that share a common sequencing controller to enforce Altera's recommended power-up order: VCC (0.9 V) first, then VCC_PLL, then VCCIO banks last. Failure to sequence properly risks latch-up at power-on.
The 1152-ball FC-HFBGA dissipates heat primarily through the ball grid and PCB copper, not through the top of the package. Estimated: at 15 W dissipation and a JEDEC JESD51-9 still-air board, junction-to-ambient thermal resistance is roughly 8-12 C/W, requiring at least 1 sq in of inner-plane copper per quadrant plus a thermal interface material and heatsink for sustained full-utilization operation. Without a heatsink, derate ambient or workload duty cycle to keep Tj below 100 C.
The 1.0 mm ball pitch on the 1152-ball FC-HFBGA requires laser-drilled or sequential-lamination microvia stackups. All transceiver lanes must use controlled-impedance differential routing (typically 100 ohm differential) with length matching within the budgets the Stratix IV GX handbook specifies per protocol (PCIe, XAUI, CEI-6G). Decoupling: place 0402/0201 ceramics as close to each power ball as possible, with a bulk capacitor bank at the voltage regulator output.
Do not power up the EP4SGX530HH35C2NES without confirming the MSEL configuration mode pins are set correctly; mis-set MSEL can put the device in an unsupported configuration state and prevent JTAG access. Also, the 8.5 Gbps transceivers require their own dedicated supply decoupling and a continuous reference clock; absence of a clean reference will prevent transceiver link-up regardless of logic design. Finally, prefer Quartus Prime Programmer over the legacy Quartus II Programmer for newer programming file formats on this part.
Informations de conformité
Compliance data not present in the verified web data summaries. For RoHS/lead-free status, consult the Altera/Intel material-composition declaration (MCD) for the specific lot and date code.
